Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
Can anyone help me?
thank you

Hi Largo09,
Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

Similar Messages

  • Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

    Hi everyone.
    At the beginning I'm sorry for my bad english so I will say shortly.
    A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
    I can't speak with friends on skype ;( Help me. I hope you know what I say.

    Hello
    Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
    Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
    After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

  • Satellite P300 - Microphone doesn't work after Windows 7 installation

    Hi,
    I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
    I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
    Thanks
    James

    Hi
    Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    After this it should be possible to use the internal microphone.
    By the way: Which application you use for the internal microphone? Skype or something else?

  • U405 s2833 Microphone doesn't work after Windows 7 Upgrade

    Hi all,
    I had done the WIndows 7 Upgrade for my U405 S2833, everything is working fine but the microphone doesn't the drivers are installed and it appears at the device manager, msn, skype and some other IM programs but it just doesn't work, I had downloaded all drivers till date, but nothing seems to work, any idea?
    Regards

    Satellite L305-S5970
    You may want to experiment with these drivers. The most recent is not necessarily the best fit.
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
       Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5859 - Released 07/13/09)
       Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5789 - Released 06/25/09)
    -Jerry

  • Satellite L300-1A3 - Microphone is not working with Windows 7

    Hello, I have a problem with integrated microphone on my laptop.
    Mic comes with web cam chicony and under Windows 7 camera works just fine but microphone don't work at all.
    Does anybody have solution to that problem?
    Under vista microphone is working fine but I wanted to try Windows 7 on laptop and everything is working excellent except microphone.
    Regards in advance.

    Thanks for reply. Strange is that all hardware has been properly installed, i have installed drivers from: chipset including graphic and sound card, lan, wlan, camera, aver tv card in express card slot, and everything is working great, except integrated microphone. Camera and sound are installed with vista drivers and both are working well. Win 7 in general is much better for this laptop than vista, runs very fast and stable. I will rather buy external microphone, if this couldn't be sorted out, then installing vista again.

  • The key to enable my microphone doesn't work on Windows 10!

    Yesterday I updated to Windows 10 and I had the internal_power_error problem and i fixed it. The new problem is that I have a key on my keybored that enables the microphone by clicking Fn+F5. It used to work on windows 8.1 but now on windows 10 it doesnt. I tried enabling it from the stettings but it is already enabled. So i dont know what to do and Cortana wont work because my microphone is not working.  PLEASE HELP !!!

    Hi,
    What is the OS of your machine ? Please try to enable Microphone in Recording devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Microphone doesn't work after Windows clean install

    I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
    I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
    I have tried the Toshiba Software Installer but it didnt help
    I have tried both drivers on toshiba's website for Realtek but it still doesnt work
    driver_audio_realtek_TC40053600B.exe
    driver_audio_realtek_TC40064600A.exe
    Anything else I can try. Please help
    Thank you.

    Satellite A135-S4677
    After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
    1st Hardware Drivers & Hardware Utilities
    1) Chipset related
    2) Display
    3) Sound
    4) All other hardware drivers & hardware utilities
    2nd Toshiba Utilities & Toshiba Software
    1) Toshiba Value Added Package (TVAP)
    2) Toshiba Flash Card Utility (sometimes included in the TVAP)
    3) All other Toshiba utilities and Toshiba software
    Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
    So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
    Intel Chipset SW Installation Utility for Windows 7 (32/64)
    Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
    Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
    Please let us know what happens. Good luck.
    Mike

  • Satellite A200 - Touch pad doesn't work with Windows 7

    Hello,
    I have an A200 and have upgraded to Windows 7. Can anyone help me with how I can get the touch pad to work?
    I would be very gratefull for any advice.
    Thanks in advance

    Hi,
    Yes I have no function. I have been to the toshiba site but there was no windows 7 driver.
    then to synaptics and downloaded the driver restarted as promted and still not working?

  • When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

    When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

    I'm sure you have checked, but make sure your mute button on the keyboard is not on , also check that you haven't touched the space bar during a call as that mutes it.
    Check your settings in Skype>Preferences, Audio/Video tab. Here's what mine look like:

  • Microphone doesn't work anymore

    Hi all,
    I don't know what happened on both my Mac (iMac 24" Intel and Macbook Late 2009), but on both I cannot use anymore the microphone (integrated or built-in).
    I tried using a standard 3.5 jack headset and a USB one and I'm 100% sure that all my headset were working because:
    In Windows they works;
    They worked on both Mac since few days ago (I'm a trainer and I daily make lessons using Web-ex).
    System preferences recognize the audio input (built-in and integrated), but it doesn't work (no activity on the bar, even if I remove the headset).
    All software that needs a microphone doesn't work (Webex, Skype...).
    I'm sure that there has been an update that compromised the correct functionality, as it is on 2 Mac.
    Do you have any suggestion for me? I tested 2x 3.5 jack headset and 2x USB, I had the issue with 10.8.3 and I've it still with 10.8.4 (updated today).
    I really don't know what to do!
    Thanks in advance!

    I have an iMac, Intel Corre i5 running 10.8.5 and the built-in mic is not working.
    I have checked System preferences and it is set to built-in mic and not muted. If I physically tap near the built-in mic, I see the sound level bounce. But speaking, even if right next to the mic, doesn't register. In Garage band when I try to record my voice, it only picks up the finger snaps but not my voice (snapping to show a rhythm to my choir).
    What is going on?

  • I bought one Iphone a 3 weeks ago and I can´t listen what people speak with me, because de microphone doesn´t work, I need  to use the speaker, somebody know what I need to do?

    I bought one Iphone a 3 weeks ago and I can´t listen what people speak with me, because de microphone doesn´t work, I need  to use the speaker, somebody know what I need to do?

    Just thought that I'd report that I've decided on my solution.
    It seems that just making do with what I can find on the US store is the easiest and perhaps also the best way of going about it. All other methods mean trouble. I'm lucky that China hasn't outright blocked the US store, as they HAVE blocked iTunes music store in China already (something about a song about Tibet caused them to block the store entirely).
    So yeah, just going to deal with it I guess. I should be grateful I'm getting anything at all, considering the country I'm in. Still, I just feel so ripped off sometimes when I pay for expensive devices and I can't even get much out of them do to my region. iPhones cost around $700 in China because there's no company like AT&T that you can just sign a contract with to get one, so you have to pay up-front for the phone, and get less features out of it in the end. Makes buying smart phones look like a waste of time and money sometimes, since you can't use the device to do what it was built to do due to censorship and not having any content for your region (though they do have a lot of Chinese apps that I can't use due to not knowing Chinese).

  • Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam

    Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam (for Windows 7).
    I have to use external microphone from Logitech now.
    I send few emails to Customer Service. They answered once to check my Device Manager and disappeared after that. I'm really disappointed.
    It looks like the drivers for Windows 7 are wrong.

    hey Killthebeeping,
    if you have the USB Mic connected kindly remove it first then uninstall the audio drivers for your B510.
    let windows install its generic driver.
    once done plugin your usb mic and test it again.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Frequently the earphone and microphone doesn't work and I have to turn off in order to work, it ocurr  whit skype and the ipod function, what I have to do?

    Frecuently the earphone and the microphone doesn't work, specially with skype and the music (ipod), and I have torestart (turn off) my Ipad !.
    What I have to do?
    Thanks in advance for your support.

    Have you reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen? If that doesn't resolve this, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will not lose any data, but all device settings will have to be entered again.
    If that doesn't fix it, your next step might be to backup then erase all content and settings or restore the iPad to factory settings. See how if goes if you reset all settings first.

  • Microphone doesn't work.

    So i thought i would update my sound driver. So i came to the website here and DL a realtek sound driver and now my microphone doesn't work. When i go to the 'Recording' Tab in my sound section of Control Panel, it just says "No Audio Devices are Installed."
    Any ideas?
    Thanks
    Qosmio X305-Q701

    Qosmio X305-Q701 
    Try rolling back the driver.
       Restore a driver to its previous version
    -Jerry

  • Touch Pad of Satellite P50-A-M13 doesn't work anymore - Solution

    Hello *,
    before someone should have the same problem, I wanted to share my problem and my solution here:
    Information about my system:
    I have installed Windows 8.1 Professional and Scientific Linux 6.5 in Dual Boot on my Toshiba Satellite P50-A-M13.
    _*Problem:*_
    The Touch Pad suddenly doesn't work below Windows 8.1 Professional anymore, the mouse pointer vanishes after a reboot. You can't deactivate/activate the Touch Pad with the F5 key (without pressing the FN-button) anymore. The white LED of the Touch Pad doesn't work anymore. Another operating system (in my case: Scientific Linux) in Dual Boot doesn't recognize the Touch Pad anymore after a reboot, too. So it isn't working below the other operating system anymore, too. It looks like a hardware defect since it affects more than one operating system.
    _*Additional information:*_
    If you attach an external USB mouse to your Toshiba notebook, the Touch Pad will work again, you can activate/deactivate the Touch Pad via the F5 key (without pressing the FN-button) below Windows 8.1 again, but the white LED of the Touch Pad still doesn't work and doesn't turn off or on. Same below another operating system in Dual Boot. The BIOS doesn't offer a feature that you can activate or deactivate the Touch Pad there.
    Reason:
    I had the problem that the feature "automatic driver installation" below Windows 8.1 Professional was activated. The driver for the Synaptic Touch Pad got replaced by a Microsoft driver in the background automatically.
    _*Solution:*_
    _Keep the external USB mouse attached and start Windows 8.1 if it isn't started already. Then deactivate feature "automatic driver installation" below Windows 8.1. Then reinstall the Synaptic Touch Pad driver from the download page of Toshiba website again. Then reboot Windows. The Touch Pad should work then again. And never, never activate the feature "automatic driver installation" below Windows 8.1 again!_
    Many thanks, Jana

    Thanks Jana for this post!
    I also noticed that sometimes Windows updates could break the driver functionality...

Maybe you are looking for

  • I need to upgrade my macbook ram and hard drive pls help

    Hi all, I need to upgrade my macbook's RAM and hard drive as after 3 yrs of use it is showing signs of aging. I am novice in hardware stuff. I am planning on doing it entirely by myself and on tight budget will need to compare the prices across selle

  • How to Get the sentitems count in exchange server 2010

    hi, I want to take all users sent items count in exchange 2010

  • EM Cloud 12c Management Agent Software for linux x86

    Hello folks I need to acquire Management Agent Software for linux x86 using offline mode. I followed steps described in online documentation of Oracle Cloud Control 12c, section "4.2.3.2 Acquiring Management Agent Software in Offline Mode" I download

  • Type conflict in function module parameters

    Hi All, i hve to pass dynamic field <dyn_field> into function module parameters but  it's giving a dump for type conflict. where VALUE2  data type in 'AUTHORITY_CHECK' is UST12-VON but if i define <dyn_field> type UST12-VON . then it'll give dump in

  • Http- XI- RFC BPM Error

    Hello,    I am trying to configure a bpm for this scenario. I have a web application which will send a customeised PO xml to XI. This po will contain a single line item info. XI will add this line items into a single po and that will be transfered to