Satellite A300D-15B - Switched off and charging issue

Hi
I have a Satellite A300D-15B, running Windows 7 32bit, which bought quite recently used. I have encountered a couple of problems which I hope someone can help me with!
Firstly, the day I got the machine, it switched suddenly, but turned back on immediately and seemed to be ok. Afterwards, 3 weeks later (saturday 2nd July) I was installing some software when I got a virus warning from AGV, within a few moments the machine again turned off suddenly. Unfortuanetly this time it would not turn back on and the charge/AC supply lights would not come on. After doing some research I found that disconnecting the BIOS battery and dissipating the power enabled me to turn the machine on. Is there any known issues which could be causing this?
Secondly, once I had got the laptop to turn on after the sudden shutdown on staurday, I have found the charger still wont register as being plugged in unless i use the folling procedure.
1) diconnect the mains fuse cable from the transformer block
2) remove the battery
3) plug in the DC jack
4) reconnect the mains cable to the transformer which causes the mains light on the laptop to turn on.
5) reconnect the battery
The laptop then charges normally, I am using it to write this post.
I have to use this process everytime the machine is unplugged from the the mains or charger, which is irritating and also a worry that there could be big problems on the horizon.
Any help would be hugely appreciated.
cheers
John

Hi
I upgraded it to 7, the first time it shut down was the first time it was switched on after the recovery disc had been used. Could that be an out of date driver on original settings? Then upgrading to 7 giving similar problems?
I upgraded to 7 not a fresh install, which I never usually do.
The charger is a genuine unit not a 3rd party, I won't use them as I've had issues in the past. I'm just concerned it's a mainboard problem given the shutdown and subsequent strange charging behaviour. Do these have EEPROM's in the chargers and maybe clearing the CMOS has caused a recognition problem?
Cheers
J

Similar Messages

  • My Satellite L350 keeps switching off and then start up again.

    Satellite L350 keeps switching off and then start up again.
    The fan is free from dust. I reinstalled Windows
    There is a new Battery for 1 year
    If the laptop is off, the battery can be charged. The laptop is operating normally on battery.
    From the moment that the AC adapter is connected, the computer turns off.
    When I use the computer without a battery but with the AC adapter, the computer shuts down. Test with another AC adapter, the computer turns off.
    Could it be that the cable between the motherboard and the DC jack is causing the problem whether this is unlikely ?
    Anyone have an idea to help me with this problem ?

    Dr. Lamp,
    Shut down is not always at the same point. In the beginning this happened from time to time and than more frequently. If i start up the computer now with the AC adapter connected than he doesn't start up completely. He shuts down and reboot or blocked.
    To answer your question, I am able to enter the BIOS settings.
    I bought the Yannec battery here:
    I summarize the tests that I did together:
    Loading battery when computer is off = yes
    Running applications only with battery = yes
    With AC adapter connected = computer shut down and reboot
    Without battery, only with AC adapter connected = shut down and reboot
    With other AC adapter = shut down and reboot
    If it is a problem of the motherboard is it not possible that it can be repaired rather than replaced by a new one?
    Many thanks for your patience
    +Message was edited: link has been removed - commercial+

  • My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac

    Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
    I tried different cables and different computers and nothing. I can't restore because it's no recognized...
    Thanks a lot!!

    Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
    So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
    As you can see there is no charging logo when the phone is connected

  • Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button and in charge the white screen comes for 2 second and goes

    Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.

    Hello Ritugor,
    I would be concerned too if my iPhone was not powering on.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • IPad 2 switched off and not charging after iOS 7.1 update

    iPad 2 switched off and not charging after iOS 7.1 update. Pls help me. I have tested my charger. Its working in another device. But my iPad 2 is not charging with other adapters too. What to do??

    Hello, 92.romil. 
    Thank you for visiting Apple Support Communities.
    I would make sure you are using an Apple branded cable with your iPad.  If you are, the troubleshooting steps in the article below may help.  The steps listed below for the iPhone and iPod still apply to your iPad. 
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Jason H.

  • My iphone5 switch off and on automatically and turns on..I have few days left in warranty and I have so much hanging problem after the apple has replaced my iPhone..they replaced 5 times and again I am getting some issue..what should I do...??

    MMy iphone 5 switch off and on,an apple logo appears and although it is not on last stage of battery..I have replaced my iPhone 4 times but I am getting some issues again and again..now I have few days left in my warranty..AppStorecrashes sometime and safari mostly going to be hang...ttell me the proper solution what should I do...??
    also call drop issue..

    Is your battery dead or alive?
    If the battery is dead, we must find out if it is:
    1. Charger problem
    2. Cable problem
    3. Docking port problem
    4. Wall socket problem

  • My ipod nano was working fine until i uploaded some new tunes today.  It sync properly and once disconnected it just switched off and would not even turn on.  I have put it on charge for a few hours but nothing happens, infact the charger is getting hot.

    My ipod nano was working fine until i uploaded some new tunes today.  It sync properly and once disconnected it just switched off and would not even turn on.  I have put it on charge for a few hours but nothing happens, infact the charger is getting hot. Pleaseeeeeeeeeeee help I need my ipod. 

    The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.

  • TS2634 my husbands ipad is froze with the message that he needs to back up to his icloud account. We have tried to switch off and it wont let us and have now got it re-charging. Any ideas?

    My husbands ipad has froze with the message he needs to back up to his icloud account. He has tried switching off and on again to no avail as message is still there and is now trying to re-charge it. Any suggestions?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • NO power on my MacbookPro: it all started with Battery of my MacBook Pro saying it was not charging (even if the pro was plugged) and it then switched off and now wont turn back on. There is no light on the magsafe and no startup noises at all.

    NO power on my MacbookPro: it all started with Battery of my MacBook Pro saying it was not charging (even if the pro was plugged) and it then switched off and now wont turn back on. There is no light on the magsafe and no startup noises at all.

    If you have Apple Care or your computer is still under warranty, give them a call and get a case number.  Otherwise, take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please

    My iphone 4s has switched off and will not switch back on even when its connected to power charger or laptop. can someone help please

    Just read that someone had the same problem on 3gs and someone had replied to press the home button and power button at same time, so I tried this and within a few seconds my phone had switched itself back on.

  • My macbook pro switched off and wont turn back on. i tried to charge it but it still wont work. how can i get it to turn back on??

    My macbook pro randomly switched off and wont turn back on. I have tried to charge it but it wont work. How can I get it to turn back on??

    It's more than likely broken, a part has failed. You need to take it to a Apple store Genius Bar to be checked out and fixed. Or just buy a new Mac as to fix the one you have might be cost prohibitive. Especially if your warranty has expired.

  • Memory upgrade on Satellite A300D-15B

    Hi all,
    I am having upgrading the ram on my laptop from 4gb to 8gb. First I will post the full details of my laptop then explain the problem.
    (Original Configuration)
    Satellite A300D-15B
    Model : PSAKCE
    Bios Ver: 3.30
    AMD Turion X2 Ultra Dual-Core Mobile Processor ZM-86 (Upgraded from ZM-80)
    Genuine Windows Vista Home Premium 32bit
    4096 MB (2048 +2048) PC2-6400 DDR RAM (800MHZ)
    Right then, I installed Windows 7 32bit on it ages ago and upgraded the CPU and have never had any issues as i work with computers.
    I did some checking and found out my Motherboard supports uo to 8gb of ram and decided to buy two 4gb ram modules. I made sure I got the correct ram for my laptop.
    I upgraded the ram and it recognised it without any issue and even stated that 8gb of ram was installed under 'System'in contol panel and in the bios. As it was a 32bit OS it only utilised 3gb of the ram. I then decided to upgrade my OS to Windows 7 Ultimate 64bit and thats when the fun began.
    Basically my laptop will not boot if I have more than 4gb of ram installed (In any configuration) and get a BSOD. I have had a few different Stop Error codes but I cant seem to find a solution. Also there arent any/many options to change in the bios so Im stumped.
    I have tested the ram modules with Memtest several times without error and have also tried them in different laptops without issue. I know my laptop suppors the 8gb as I had no issues running the 32bit OS.
    All my drivers and other software are to date and work fine and have installed all windows updates to date.
    Has anyone else had this issue and is there a patch/fix available?
    Any help, ideas or suggestions are welcome and hopefully I can sort this problem out. Many thanks in advance.
    Melchius

    Hi there,
    The Ram I bought is the correct to the letter and is as follows:
    Komputerbay DDR2 PC2-6400 @ 800Mhz - 2 x4gb modules.
    It has exactly the same Cas latency and timing settings aswell.
    You mentioned that it booted fine in 32bit as it didnt address the full 8gb but now on the 64bit OS I have 1 x 4gb module installed and it is recognised without any issues,.
    If the ram wasnt compatible in any way then I should be getting some errors or something to indicate a problem.
    It also wouldnt boot/run properly with just 1 of the 4gb modules installed on either 32/64bit OS's, which isnt the case at all. I am certain that the ram itself isnt the issue.
    I also tried installing 1 x 2gb and 1 x 4gb module for a total of 6gb and I managed to get windows to load (once) but it then stopped responding. Im not very keen on spending loads of money on another 8gb of ram from Kingston or Crucial if the same thing is going to happen, which I fully expect it will.
    Thanks for the suggestions though, any other ideas?
    Melchius
    Also worth mentioning that the ram that came with the laptop wasnt even Toshiba brand, it is Samsung ram so maybe they should make a list of all the compatible makes for their laptops or maybe not lock their bios's to the point that the end user is so limited.
    +Message was edited by: Melchius+

  • Satellite A300D-15B PSAKCE - USB message appears if BT is enabled

    Sorry if I'm one of those annoying people who has been posted something that's already been posted.
    A couple of weeks ago, my laptop a Satellite A300D-15B series (PSAKCE 00K0DEN) kept coming up with a msg - "USB DEVICE NOT RECOGNIZED" - when nothing was plugged into any of the USB ports (anything I subsequently plugged in any of them works fine).
    Today, I was wanting to use bluetooth with my phone. The icon is red and blue as opposed to the white and blue combination it usually has when ready to send files. On opening the 'add new connection' menu, a msg popped up saying "Bluetooth not ready". On the options menu, running a diagnostics reveals this msg: "Check communication with Bluetooth device: Fail".
    I disabled Bluetooth and noticed that I stopped getting the USB message too - and on enabling Bluetooth, the message would keep cropping up, indicating that there would be a link between them.
    I am a complete technology noob and I have no idea how to fix this, or even grasp what the problem is to start with, and most internet sites that seem helpful also seem full of jargon I can't understand!
    I really hope someone can help based on my minimal information, and thanks in advance.
    -Sub.

    Hi,
    a possible fix maybe to uninstall all your USB devices in Device Manager (under Windows XP, I don't know the compartment name under other MS operating systems).
    It helped me, when I was using a usb hub and switched the devices on it's ports very often. After some time, some of the devices stopped being recognized by the system and I got the "unrecognized device plugged in" message instead.
    The uninstallation of the USB components also removes any profiles that Windows created for a particular device (at least that was the explanation that I've found somewhere in the Internet).
    If this doesn't help (Windows should reinstall all the drivers after you -> restart your computer), try maybe to uninstall the BlueTooth devices the same way. Write if you have any progress / solution for/with the problem.

  • Please help me my iphone 4 switch off and not working

    please help me my iphone switch off and not working

    Hello safaabh,
    I would be concerned too if my iPhone would not power on.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1414 My iPhone5 got a problem of getting automatically switched off and then automatically switched on. First i can see my screen getting faded to pinkinsh sort of color and then showing vertical grid lines. any suggestions?

    My iphone5 got a problem of getting switched off and on automatically. I can see my screen getting faded and then i can see the pink vertical lines before it switches off. After about 10 seconds it switches on again.

    Hi sumit1310,
    Thanks for visiting Apple Support Communities.
    I'd start with these troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards,
    Jeremy

Maybe you are looking for

  • Reg : Unable to open the PDF when opening Notification documents

    Hi All, I used QM03 and then I type in a notification number and then I hit return I get a series of screens and then I click on documents.  I then get to the document tree and then open the RPC file.  from that I get a pdf file.  I click open but I

  • Dial a Phone from a PDF Link adding on a passcode on Mobile Devices

    I am in need of assistance.  I need to be able to dial a phone number and passcode from a pdf.  I found an article that explains how to set up a pdf so that it dials the number.  I tried it and it works great.  But, I need to add a passcode on after

  • Error message on App World Upgrade

    Last night I upgraded App World on my Bold9700 and have been getting the following error message since:- Uncaught exception: java.lang.NoClassDefFoundError I cannot get into the App world at all since the upgrade. I have also tried rebooting the phon

  • Portlet Preferences Gateway Issue

    I have a custom portlet, I am setting 2 custom preferences: PortletResponse.SetSettingValue(SettingType.Admin,"URL", TextBox1.Text);PortletResponse.SetSettingValue(SettingType.Admin,"Count",TextBox2.Text);These settings basically Set the URL and Site

  • IChat Screen Sharing Keeps Disconnecting

    I recently bought my first Mac and not so good with all the tech talk but I'll try my best. So I was trying to do Screen Share via iChat with a friend who has a 24" iMac with Mac OS X Leopard. I have a 13" MacBook Pro with Mac OS X Snow Leopard Versi