Satellite A300D-15b: Where to get Chicony cam software for Win7

I have recently done a clean install of windows 7 64bit on my Satellite A300D-15b and was wondering were i can download the Chicony camera assistant software from?
Cheers Avo

Hi Avo,
If you cant find Windows 7 driver at the moment you should try the Vista driver. I have also Satellite A300D and Im still using the Vista driver for Chicony webcam it works really well.
You can download the driver here:
http://eu.computers.toshiba-europe.com/ > Support & Downloads > Download Drivers
If you have more questions, please let us know! :)

Similar Messages

Satellite A300D-15B - Where can I buy HDD caddy/tray?

Does anyone know where I can buy a caddy / tray in the UK so I can fit a second hard drive into the empty bay in my laptop?
Thanks in advance.
Col

Hello
Such HDD caddy that you mean you can get from an authorized service provider. They sell all original Toshiba spare parts and there you can buy one.
By the way, here you can search for nearest authorized service provider:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Greets

Memory upgrade on Satellite A300D-15B

Hi all,
I am having upgrading the ram on my laptop from 4gb to 8gb. First I will post the full details of my laptop then explain the problem.
(Original Configuration)
Satellite A300D-15B
Model : PSAKCE
Bios Ver: 3.30
AMD Turion X2 Ultra Dual-Core Mobile Processor ZM-86 (Upgraded from ZM-80)
Genuine Windows Vista Home Premium 32bit
4096 MB (2048 +2048) PC2-6400 DDR RAM (800MHZ)
Right then, I installed Windows 7 32bit on it ages ago and upgraded the CPU and have never had any issues as i work with computers.
I did some checking and found out my Motherboard supports uo to 8gb of ram and decided to buy two 4gb ram modules. I made sure I got the correct ram for my laptop.
I upgraded the ram and it recognised it without any issue and even stated that 8gb of ram was installed under 'System'in contol panel and in the bios. As it was a 32bit OS it only utilised 3gb of the ram. I then decided to upgrade my OS to Windows 7 Ultimate 64bit and thats when the fun began.
Basically my laptop will not boot if I have more than 4gb of ram installed (In any configuration) and get a BSOD. I have had a few different Stop Error codes but I cant seem to find a solution. Also there arent any/many options to change in the bios so Im stumped.
I have tested the ram modules with Memtest several times without error and have also tried them in different laptops without issue. I know my laptop suppors the 8gb as I had no issues running the 32bit OS.
All my drivers and other software are to date and work fine and have installed all windows updates to date.
Has anyone else had this issue and is there a patch/fix available?
Any help, ideas or suggestions are welcome and hopefully I can sort this problem out. Many thanks in advance.
Melchius

Hi there,
The Ram I bought is the correct to the letter and is as follows:
Komputerbay DDR2 PC2-6400 @ 800Mhz - 2 x4gb modules.
It has exactly the same Cas latency and timing settings aswell.
You mentioned that it booted fine in 32bit as it didnt address the full 8gb but now on the 64bit OS I have 1 x 4gb module installed and it is recognised without any issues,.
If the ram wasnt compatible in any way then I should be getting some errors or something to indicate a problem.
It also wouldnt boot/run properly with just 1 of the 4gb modules installed on either 32/64bit OS's, which isnt the case at all. I am certain that the ram itself isnt the issue.
I also tried installing 1 x 2gb and 1 x 4gb module for a total of 6gb and I managed to get windows to load (once) but it then stopped responding. Im not very keen on spending loads of money on another 8gb of ram from Kingston or Crucial if the same thing is going to happen, which I fully expect it will.
Thanks for the suggestions though, any other ideas?
Melchius
Also worth mentioning that the ram that came with the laptop wasnt even Toshiba brand, it is Samsung ram so maybe they should make a list of all the compatible makes for their laptops or maybe not lock their bios's to the point that the end user is so limited.
+Message was edited by: Melchius+

Satellite A300D-15B PSAKCE - USB message appears if BT is enabled

Sorry if I'm one of those annoying people who has been posted something that's already been posted.
A couple of weeks ago, my laptop a Satellite A300D-15B series (PSAKCE 00K0DEN) kept coming up with a msg - "USB DEVICE NOT RECOGNIZED" - when nothing was plugged into any of the USB ports (anything I subsequently plugged in any of them works fine).
Today, I was wanting to use bluetooth with my phone. The icon is red and blue as opposed to the white and blue combination it usually has when ready to send files. On opening the 'add new connection' menu, a msg popped up saying "Bluetooth not ready". On the options menu, running a diagnostics reveals this msg: "Check communication with Bluetooth device: Fail".
I disabled Bluetooth and noticed that I stopped getting the USB message too - and on enabling Bluetooth, the message would keep cropping up, indicating that there would be a link between them.
I am a complete technology noob and I have no idea how to fix this, or even grasp what the problem is to start with, and most internet sites that seem helpful also seem full of jargon I can't understand!
I really hope someone can help based on my minimal information, and thanks in advance.
-Sub.

Hi,
a possible fix maybe to uninstall all your USB devices in Device Manager (under Windows XP, I don't know the compartment name under other MS operating systems).
It helped me, when I was using a usb hub and switched the devices on it's ports very often. After some time, some of the devices stopped being recognized by the system and I got the "unrecognized device plugged in" message instead.
The uninstallation of the USB components also removes any profiles that Windows created for a particular device (at least that was the explanation that I've found somewhere in the Internet).
If this doesn't help (Windows should reinstall all the drivers after you -> restart your computer), try maybe to uninstall the BlueTooth devices the same way. Write if you have any progress / solution for/with the problem.

Satellite A300D-15B - Switched off and charging issue

Hi
I have a Satellite A300D-15B, running Windows 7 32bit, which bought quite recently used. I have encountered a couple of problems which I hope someone can help me with!
Firstly, the day I got the machine, it switched suddenly, but turned back on immediately and seemed to be ok. Afterwards, 3 weeks later (saturday 2nd July) I was installing some software when I got a virus warning from AGV, within a few moments the machine again turned off suddenly. Unfortuanetly this time it would not turn back on and the charge/AC supply lights would not come on. After doing some research I found that disconnecting the BIOS battery and dissipating the power enabled me to turn the machine on. Is there any known issues which could be causing this?
Secondly, once I had got the laptop to turn on after the sudden shutdown on staurday, I have found the charger still wont register as being plugged in unless i use the folling procedure.
1) diconnect the mains fuse cable from the transformer block
2) remove the battery
3) plug in the DC jack
4) reconnect the mains cable to the transformer which causes the mains light on the laptop to turn on.
5) reconnect the battery
The laptop then charges normally, I am using it to write this post.
I have to use this process everytime the machine is unplugged from the the mains or charger, which is irritating and also a worry that there could be big problems on the horizon.
Any help would be hugely appreciated.
cheers
John

Hi
I upgraded it to 7, the first time it shut down was the first time it was switched on after the recovery disc had been used. Could that be an out of date driver on original settings? Then upgrading to 7 giving similar problems?
I upgraded to 7 not a fresh install, which I never usually do.
The charger is a genuine unit not a 3rd party, I won't use them as I've had issues in the past. I'm just concerned it's a mainboard problem given the shutdown and subsequent strange charging behaviour. Do these have EEPROM's in the chargers and maybe clearing the CMOS has caused a recognition problem?
Cheers
J

Satellite A300D-15B - Upgrade from Windows 7 32bit to 64bit?

I've added an extra 4GB of memory to my Satellite A300D-15B (PSAKCE). When I try to run the Windows 7 64bit upgrade it fails with a blue screen.
Is it possible to upgrade this model to 64 bit Windows 7?

Hi ronchennells,
Theoretically it should be possible to upgrade to Windows 7 64bit You can do/install everything what you want but the important point is drivers
On the official Toshiba website there are no Windows 7 64bit drivers but you can try the Vista 64bit drivers. Normally they are compatible
Generally speaking its not necessary to upgrade to 4GB RAM or more for using Windows 7 64bit. You can also use the 64bit version with 2GB only.
What happens if you start the upgrade with original memory module only?

Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

Maybe because it's not a 'genuine' retail version? Many OEM versions just don't work - and I've no idea which flavor of Win7 your friend downloaded. Obviously one that Boot Camp doesn't recognize. Best to just pony up the cash for a full retail version, of some flavor - and use it. You COULD, of course, download the 14-day trial version of Parallels Desktop and see if you can install Win7 as a virtual machine... it might or might not work. Boot Camp just isn't finding the resources it needs on the copy you have - try Parallels and if that doesn't work just purchase a retail (or student discounted) version.
Clinton

How and where do i download camera raw for cs6 64bit

how and where do i download camera raw for cs6 64bit

download the cs6 update for you app, http://www.adobe.com/downloads/updates/

Where can I get old LV software for Mac?

I lost my disks for LV 7.1. While NI can look up my SN and the record of my purchase, they cannot supply me with replacement software. They said I can get it from anybody who has it and install it on my machine using my purchased serial number for authentication.
I was a little bummed that they cannot just supply me with the code, but, I am not a business person and most surely cannot appreciate the myriad reasons why it is a bad idea to provide code replacement service.
Does anyone know where I can get a copy of 7.1 for Mac OSX (10.4) free of charge?
Naturally, I have a virtually unlimited supply of Windows versions in my vicinity, but I don't know anybody using LV for Mac.
Can someone loan me a CD? I'll pay for shipping.
I'm in Atlanta, GA.
jc
Mac 10.4
LV7.1
CLD

Thanks for the suggestion Simon. I just sent an email to [email protected] I didn't email before because I assumed that my phone contact at NI (the one that looked up my purchase and my serial number) was aware of the NI policies and would not send me away disappointed without making sure that she could not get 7.1 software for me. I'll let you know what the email contact says.
jc
Mac 10.4
LV7.1
CLD

Where can I get Reports2.5 software for Windows XP

Hi,
Where can I get Reports2.5 software for Windows XP. I could not find it in OTN
Thanks,
D

You'll probably won't find any. Because right now here at work we are using Reports 6i and when we upgraded to Windows XP we have to download a patch just to make it work in.

Where would i find the software for the HP Officejett 5610 v?

Where would I find the software for the HP officejett 5610 v at?

You can get the necessary software for your officejet after selecting the operating system and clicking next from the following weblink:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=4411...
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

How can I download sony handy cam software for my mac book pro?

How can I download sony handy cam software for my mac book pro?

From Sony's support site: http://esupport.sony.com

How long it will take for apple to verify my info to get the new software for free?

how long it will take for apple to verify my info to get the new software for free?
i have submit my request since 6 hours, is that normal??

from what i hear, it takes a minimum of 72 hours before you hear back from Apple.
but because there are a lot of people are wanting to get their free upgrades, it might take even longer now.
good luck - just be a little patient and your turn will come soon....

Where i can download SAP software for airlines?

where i can download SAP software for airlines?

Hello Afriorita,
Try below link for 32 bit OS or you can search according to your system at that page:
https://store.sap.com/sap/cpa/ui/resources/store/html/SolutionDetails.html?pcntry=US&sap-language=EN&pid=0000000222
Thanks
Piyush

Where do I find driver software for a 64bit pc?

Where do I find driver software for an older ipod classic photo 30gb for a 64bit computer working on Windows 7 please?

Fixed this by doing the following:
un-installed iTunes (it was latest version, but removed it anyway)
downloaded latest version of iTunes for 64 bit Windows 7
opened iTunes & logged in
connected iPod to laptop using USB cable
it was recognized & the driver was updated
iTunes copied all of my purchased music & data to the new iTunes on my VAIO
authorized the purchased music on the new computer
all purchased files were updated in iTunes

Satellite A300D-15b: Where to get Chicony cam software for Win7

Similar Messages

Maybe you are looking for