Satellite A50 no sound after installing windows 7

where could I find the the sound driver?

I got it to work with windows 7 32 bit. I just went to hp website to support and downloads section. Type in your model number, then select windows xp as the operating system. Then download the audio driver and save it to your desktop. After the file is on your desktop you need to right click on it and click properties, then go to compatability tab and tell it to install as windows xp service pack 3. Hit apply then install. Hope it works for ya, worked for me.

Similar Messages

  • No sound after installing windows 8 on my hp 620 help

    no sound after installing windows 8 on my hp 620 help
    This question was solved.
    View Solution.

    I cannot find your audio driver on HP's support page, but I was able to locate this one, which is the same driver as yours, just the most recent version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
    http://goo.gl/0IMBd
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • NO SOUND AFTER INSTALLING WINDOWS 8.1

    Hi, I'm hoping someone will be able to help.  My sister has a compaq 58 laptop and after installing windows 8.1, now has no sound.  The sound was there when 8.1 was installed but after logging off and logging back on again, the sound disappeared.  We reinstalled windows 8.1 and same thing happened.  We have run scans and got sound again but once again logging off and logging back on again, the sound disappeared, very frustrating.
    The product code is DOX18ea#abu and serial number [edited Serial Number by Moderator]
    help would be much appreciated.

    Devina,  This seems to be a common problem with Windows 8.1. It does not save a working state when logging off. I was afraid to touch my pc when the AUDIO was in a working state. However Microsoft logged me off with no fear and did not save the working state. What a great "glutware" corp. Having said that when the AUDIO is working it appears to work great! Sure wish HP/MICROSOFT could get their act together. Can you say "BASE BAND" , "DSP", "FIR" ETC. Well they think they know the fancy stuff. Now if they could just get it to function for normal people. Can you say "KISS".
    ham123 ps: just send it back!! for total care!!!

  • No sound after installing window 8.1 on HP620 (64bits)

    Hi,
    please i need help. After installing window 8.1 on HP 620, i reinstalled all drivers but yet, No sound. i"ve checked device manager and all sound drivers seems to be working properly but i cant still hear anything. please i need help

    The sound wont run on 4GB ram pc's and uptill now i dont know why hp or windows havent fixed this issue.
    All you have to do is reduce your RAM
    The proccess is as follow
    windows key + run
    type msonfig
    on the boot tab click advanced options
    check the box close to Maximum Memory 
    make the value to be 3GB(3096).
    Click apply and ok.
    Restart your pc
    And there you are, your sounds are out as well as your headphone jack is working
    Regards

  • No sound after installing window 7 on satellite u 300

    I HAVE RECENTLY INSTALLED WINDOW 7 ON MY TOSHIBA SATELLITE U 300
    IT HAS BEEN GIVING ME PROBLEMS FOR A LONG TIME,SOME TIMES WINDOW PICKS UP THE SOUND AND IT WILL WORK FOR A WEEK OR SO AND SOMETIMES IT DOESN'T PICK SOUND FOR A WEEK OR SO.LAST DAY I INSTALLED TOSHIBA
    INSTALLER FOR WINDOW 7,IT ALSO DIDN'T HELP
    PLEASE HELP ME

    That's not a US model, and this officially supports the US region. You may want to contact Toshiba in your region.
    - Peter

  • Satellite Pro 4600 Missing Sound After Installing Windows 98SE

    I have installed Windows 98SE onto my 4600 whose specs are:
    Model PS460A-04163
    P850 14TX 128M 20 DVD ML
    I have no sound at all and all sound options are grayed out. I have downloaded a sound driver from Toshiba (Yamaha AC-XG ?) but maybe it was not the correct one. Can someone point me in the right direction for the correct sound driver. I'm also not sure what "series" this model comes under. Thanks for your help. Sep.

    Thanks for that. I have tried the Canadian site however the model type I have (PS460A) doesn't exist on their search selection drop down for Part Number. Perhaps it is know as a different model in other countries (I'm in Oz)? Maybe it doesn't matter and I can just pick one of the other 4600 models - I'm unclear on this. Can anyone confirm? Thanks again.

  • No sound after installing windows 8 pro 64bit (macbook pro 2011)

    I installed windows 8 pro edition (64bit) on my mackbook pro and after installtion i run bootcamp 5.0.5.33 everything working find but only sound card not installing i have a red cross sign on my speaker in taskbar.
    after trying alot of things like reinstalling windows, audio drivers etc. but no success.
    then once again i downloaded boot camp 5 with bottcamp assistant from my mac but still not working.
    any idea?
    i am totaly dead ......:(

    people repport the drivers that bootcamp tool on osx creates include newer drivers then the 5.0.5.33 zip file from their web site

  • No sound after installing windows 7 on HP Pavilion dv1710us Notebook PC

    I recently helped my uncle install windows 7 on his HP Pavilion dv1710us Notebook PC
    and there was no sound after installation.. i downloaded several drivers for the realtek high definition audio driver (R2.39, 38, 37, etc)
    then i tried the original driver from the HP drivers page and installed it.
    usually when there is no sound, there would be a red X on the volume icon, but when i installed the original driver from the HP drivers page, there was no more red X.. Thinking that the sound was fixed, I tried to go on youtube and watch a video... i see the green bar moving up and down on the volume slide, but then i can't hear anything.
    So is there any realtek high definition audio driver compatible for windows 7 on the HP pavilion dv1710us?
    Is there something I have to do, like right click on the application and then change compatibility settings?
    thanks in advance.

    I got it to work with windows 7 32 bit. I just went to hp website to support and downloads section. Type in your model number, then select windows xp as the operating system. Then download the audio driver and save it to your desktop. After the file is on your desktop you need to right click on it and click properties, then go to compatability tab and tell it to install as windows xp service pack 3. Hit apply then install. Hope it works for ya, worked for me.

  • No sound after installing Windows 10

    After I installed Windowa 10 I do not have any sound.  I also can not access "settings" to recover Windows 8.1.

    , Hello and thanks for posting on the HP support forums.  Here is a link to the windows update troubleshooter.  Run all recommended and optional updates.  
    http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter If that fails and you can no do the system recovery by following the instructions on this link. HP PCs - Performing an HP system recovery (Windows 8) If that fails then you will need to contact HP phone support for recovery media. Here is the link to help you with that. HP PCs - Obtaining HP Recovery Discs or an HP USB Recovery Drive Please let me know how this goes.  Thanks again for the post and have a great day. 

  • Hp g60 418ca, how to restore sound after installing windows 8.

    I installed Windows 8 on hp g60 418ca.  I have tried all troubleshooters, guidelines, etc. but have not succeeding in getting the sound working.  There are no windows 8 drivers, but I've tried the W7 and Vista drivers using various compatiblity modes.  I've tried to let W8 update the driver.  The devices DO show up in control panel/device manager and when I test them the volume level bars move up and down, but no sound comes through speakers and/or headsets.
    Do I just need to wait for HP to release drivers... what is the best approach?

    Hi doug_125,
    More than likely HP is not going to support hardware for W8 on any system purchased before Oct 1st 2011. Some updates for W8, most W7 drivers will work in W8.
    If you still had Windows 7 installed, you could run the Upgrade assistant software, it will scan your PC and generate a report on what is currently installed on your PC is compatible with W8.
    http://goo.gl/z8LVf
    Here is a document for covering upgrading to Windows 8 http://goo.gl/CO6uV
    The document is fairly extensive, covering all sorts of issues. There is a section about audio drivers. Perhaps it will help.
    Please let me know if it does help.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • No sound after installing Windows 7

    I have a four year old HP Media Center m7060n with 3gb of memory.  The only working sound jack on my system is the front green headphone jack.  I have a Logitech 5.1 speaker system that worked fine until the install.  There are two video/sound related yellow triangles in the Hardware list:
    Conexant 23880 Video Capture (Blackbird NTSC dual input)
    Conexant 2388x MPEG Encoder (Dual-input)
    The  High Definition Audio Controller and High Definition Audio Device both appear to be working properly.
    I have installed every driver that I can find that might help.
    Logitech says that my speaker model is compatible with Win 7.
    HP doesn't even list Win 7 as an OS when I look for updates ... only XP and Vista.  The updates for Vista have nothing to do with sound.
    Windows Updater gave me several new drivers including ones for the two Conexant devices.
    So far nothing has worked.  I am using a workaround by plugging the green plug from the speakers into the front jack, but that only gives me 2.0 sound not 5.1.
    Does anyone have any other suggestions?
    Thanks,
    Christie
    This question was solved.
    View Solution.

    Hi Christieamber,
    Try installing the driver that is provided by Realtek (the original makers of your audio device): http://www.realtek.com.tw/downloads/
    Just select the High Definition Audio Codecs link, accept the agreement, and then select the Win 7 version from the resulting page.
    Let us know how it goes.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • No sound after installing window 7

    compaq presario 1629uk no sound  it has red x sign

    Hi:
    You should install the latest RealTek HD Audio driver directly from the RealTek Site:
    Accept the agreement and download and install the Windows 7 drivers for the version of W7 you have (32 or 64) bit.
    http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&Down...
    Paul

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • Sound missing after installing windows 8.1 pro.

    hi. i have a problem. after instaling windows 8.1 pro , sound is missing. i in device manager everything is fine. instaled every driver.
    product name:  laptop hp 620.
    a day before this, i had windows 7 and everything worked fine.  tried everything. i dont know what else to do. if i dont find a solution then i go back to windows 7 ((

    Hi:
    The only suggestion I can offer would be to try a W8.1 IDT audio driver...
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5229457&sp...

  • No sound from right speaker on Pavilion g6-1353ea after installing Windows 8

    I've had no sound from right speaker on my HP Pavilion g6-1353ea after installing Windows 8. I've checked all drivers, and have done the sound test in sound properties (left speaker beeps fine, but then nothing from the right). Anyone else having this problem/found a solution?!

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio in both speakers.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • RSPLAN is not working in Dialoginstance of SAP BI

    Hi Experts. After installing dialog instance for existing sap bi production systems.I could not able to open url for rsplan tcode. In RSPLAN-->startmodeller it has to open url but in case of my dialog instance it is not working . It's working in CI o

  • Installation hangs at 72% during Weblogic server 9.2 installation

    I had already Weblogic portal server in my machine working fine. 3 days back when I opened workshop, it said "Could not create Java Virtual Machine" and was not starting. After that I reduced xms and xmx values in workshop.ini file and it worked but

  • Image Scan in ADF

    Dear All can any one help me to make a page to scan images using any scanners & preview after scanning using ADF technology? thanks

  • The camera light is glowing

    The Green light on the right-side of my Macbook camera is glowing. There are  no applications running which requires this camera to be active. I have rebooted my macbook several times but the light does go off.      When i open my Photo-Booth it does

  • Binding a boolean value to a Checkbox in Dashcode

    I can't seem to bind a boolean value in my JSON model to a checkbox in Dashcode. I can create the binding, and it shows up properly in the datasource and in the bindings inspector for the checkbox part, but if I launch the application through the sim