Satellite C655-S9521D Touch Pad Left Click not Working !

My Laptop (Satellite C655-S9521D) left click in touch pad not working from yesterday.
But i can move the cursor using touch pad. I think it just happened after disconnecting the wired mouse.
Looking for great support soon.
Have a good day!

Do you mean the physical button or that tapping on the touchpad doesn't work?
- Peter

Similar Messages

Ideapad S400 left touch pad and clicker not working

I've had this device for less than a year now, and all of a sudden the left touch pad and clicker are not properly working. If i try to click on something sometimes it doesnt work. I've tried about anything I can think of to see if it would help and so far nothing is working. Now let me mention that it doesnt happen all the time sometimes it works and sometimes it doesnt.

Yes I installed the right drivers before trying to dual-boot with Linux. The issue was there from the beginning. But the issue appears only after 1 or 2 hours of use. It was mandatory for me to install Linux, for my studies. So I hope it doesn't break the warranty, because it would be unfair for people who need to do what I did.
The problem is that I am right now in Finland, but I am French and I bought my netbook when I was in France. So if I send it back to HP France, it will take weeks and weeks to get it back here, and shipping cost will be really expensive, and I will be without computer during several weeks, which is impossible for me as I need it for my studies. That is why I want to go to HP Finland and ask them. I know I could call them but the last timeI called HP France, I waited for hours and didn't get any answer on the phone.

My new three week old Chromebook touch pad just quit not working.

My new three week old ChromeBook touch pad just quit working I have tried to reset or as you call it powerwash but still nothing have to use usb port mouse can you help its only two weeks old and i use it every day for school.

@miarose ,
Hello and thank you for posting on the HP support forum. If the touch pad is still not working after you have done the power wash. You will need to contact phone support for repair options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Compaq Presario F767NR caps lock,scroll,touch pad blue light not working

Hi,
I have a Compaq Presario F767NR. It downgrade it to xp. All my drivers are ok. But caps lock,scroll,touch pad blue light not working though its function is ok.
I think led is ok. I find that for the scroll lock when i press fn+num lk then the blue light works fine.

I have the same problem and I think it started when I downloaded the SP2 for the Windows Vista. So probably it is not a problem of the laptop. I have an HP Pavilion dv9500 notebook PC.
Message Edited by Yannis1980 on 10-13-2009 12:09 PM
Message Edited by Yannis1980 on 10-13-2009 12:09 PM

W520 - touch pad left click issue

Earlier today my left touch pad mouse click started to stop functioning correctly. It will only work correctly every 8 to 15 times it is clicked leaving it unresponsive and unpredictable. The right works perfectly fine as do the trackpad buttons. I have uninstalled and reinstalled the drivers and have sprayed compressed air under the key.
I had a similar problem with the laptop when i first got it but at that time the touch pad itself as well as the left click did not function properly. The face plate was replaced which fixed the issue.
Is there anything i can do software wise that might fix the problem before i have to pay to fix the hardware?

Hi Tony
If the unit is not the old one you should contact your local dealer or maybe Toshiba service partner in your country. Your unit has a valid warranty and you can ask them if there is a possibility to do something about that.

2008 Macbook pro left click not working properly after upgrading to 10.6.8

I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything. I have tried plugging in a mouse, but when I do so the mouse also behaves the same way. The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
I tried deleting com.apple.driver.AppleBluetoothMultitouchTrackpad.plist and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

I started having the same issue after update. I'm on a MacBookpro running 10.7.2
ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working. Two days later problem was back. I then did a reboot and the computer was back to working. Today the computer worked fine tell it went to sleep. I had to do a hard reboot to get the Mac up and running and now no left click. Please help. I can not use the Mac with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working. One other item when you go to pick your user at startup the left mouse click works. Help!

Pavilion dv3z1000 touch pad buttons do not work

I had my pavillion dv3z1000 repaired at HP. Now the touch pad buttons do not work

You are not addressing Apple here, we are users just like you. This forum is for users to ask technical support questions of other users. Do you have a question, because I cannot seem to find one in what you have to say.

Touch pad and keyboard not working!

Just the other day while my computer was starting up i took a tissue and started to clean it. Then the password screen popped up. I typed in the password and started to browse the web. After about 1 minute, my touch pad and keyboard stopped working! I tried to restart the computer and it did nothing. I then restored the computer to this morning ( the update my computer did while it was turning on also the time i was cleaning it. ) and it still did nothin. Please help with this problem, right now im using a USB mouse and a on screen keyboard!
I am using a HP pavilion g7 running windows 7 and AMD a6 vision.
product key: P9BXR-F3G4G-HQD6J-XBMJP-93QKT
please help me
BTW i did press somekeys while cleaning the laptop.

Yes I installed the right drivers before trying to dual-boot with Linux. The issue was there from the beginning. But the issue appears only after 1 or 2 hours of use. It was mandatory for me to install Linux, for my studies. So I hope it doesn't break the warranty, because it would be unfair for people who need to do what I did.
The problem is that I am right now in Finland, but I am French and I bought my netbook when I was in France. So if I send it back to HP France, it will take weeks and weeks to get it back here, and shipping cost will be really expensive, and I will be without computer during several weeks, which is impossible for me as I need it for my studies. That is why I want to go to HP Finland and ask them. I know I could call them but the last timeI called HP France, I waited for hours and didn't get any answer on the phone.

Spilled soda on laptop--right/left click not working

My 2 year old spilled soda on my HP G60 laptop last night. I immediately turn off computer and turned it upside down and cleaned it up. I booted up fine later on. Everything seemed fine until I realized my right/left click was not working. I can navigate fine with the touch pad but cant click on anything. Tapping method does not work either.

Make sure that the pad is not turned off.
Are the lights on above the touchpad.???
Sorry just noticed that you can use the touch pad.
MY BAD.
Let us know.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Left click not working

I'm having problems with the iMac. My left-click won't work despite trying different peripherals (trackpad, USB mouse). I have shut down, unplugged, restarted multiple times. Occasionally it will then work, but always goes back to the problem within a few hours. I have run an anti-viral program with no changes. Is this something anyone else is having trouble with? My OS is the most current version of Mavericks.

Hi
You have a couple of options as I see it please find the Web link given below might help you to resolve the issue.
Using and Configuring the Touch Pad
Even after this is the Left click does not work you might have to get the part replaced.
If your notebook is still under warranty, contact HP and arrange to have the part replaced.
If you are out of warranty and would like a guide on replacing the part yourself, please let me know.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

USB Mouse Left Click not working, DV6700

I have been using 2 hands to operate the simplist functions on my laptop.
I move the mouse around with my right hand but if I want to click something I have to use the left button under the mouse-pad.
HP support gave me a solution that worked for about an hour (Reset BIOS to default) .
The right click on the mouse (ANY USB mouse) works fine. Its just the select button.
I hate this!
HELP!!!

To CLARIFY:
ANY USB Mouse that I plug into my (DV6700 HP Pavillion) Laptop--- the left click button doesnt work unless I hold it down for over a minute and move it around clicking on and off over and over. It can take 2 minutes before it actually clicks. So, I use the left button under the touch pad. That means its impossible to use this computer for games AND dragging and dropping is weird because I never got used to doing it with a touchpad.
I doubt I will ever buy another HP because of this. I HATE IT!!!
Other USB products act weird too.
I have also deleted all USB components in Control Panel and had windows reinstall them with the wizard.
It worked briefly (couple minutes) then was corrupted again.
Am I supposed to just throw this thing away?

Z60M Touchpad Right/Left Click Not Working

I'm baffled. I can move the pointer all day long with the touchpad, but I cannot select anything by tapping nor with the left and right buttons. According the BIOS, everything with the ultranav seems normal and active. I cracked open the palmrest and checked the connection too... looks sat. Additionally, the fingerprint reader is working fine. I checked the ultranav in device manager... device appears to be working properly. I'm running a virus scan right now to rule out any possibility of a conflict.
The only positive outcome to this problem is I'm getting better at keyboard navigation
If anyone has any suggestions, please reply. Thanks in advance!

Make sure that the pad is not turned off.
Are the lights on above the touchpad.???
Sorry just noticed that you can use the touch pad.
MY BAD.
Let us know.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

MBP 2008 Click disabled on trackpad, left click not working on mightymouse & wacom pen tablet.

Hello,
i have a problem with a Macbook pro 2008.
The trackpad click button is not working anymore
(i've already tried to remove the battery underneath and push the wire that's connected to the pad,
nothing changed).
I've managed to sync a mightymouse, left click is disabled as well
(but not right click).
Then i've tried with a wacom tablet. Right click works, but not left.
(also tested switching buttons, yet no left click).
In conclusion :
left click is not functionning with any of the peripherals,
left & right click are disabled on the trackpad.
I've also tried "tap to click" without success.
Does someone have any idea of what is happening?
And how could a have the left click back?
Regards
F

Since you have a 2014 MBP, by definition it is in the 1 year warranty period. Make an appointment at an Apple store genius bar and have the technicians sort the unit out for you.
Ciao.

Mac wireless mouse left click not working on macbook pro laptop

I think I found a couple of solutions, but they have been temporary,,,,would welcome more ideas.
it happens when I travel. when you switch Wifi connections in different locations.
all of a sudden the left click on the mouse stops working, and you can only right click.
these are the only things that have worked so far to correct the issue:
rebooting (not always works)
hitting the escape key (worked at first)
making sure the mouse batteries are not low, and that no other track pads are interfering with it…(works sometimes)
the last fix was right clicking on the apple and putting it to sleep. then return by hitting escape and the problem was fixed (at least for now)
this happens all the time now, especially when I switch wifis….
c

Mystery solved! The one thing I did not try was to actually print... which works! Even while the Mac OS X W-Fi icon still shows the 'connecting' animation or the 'problem' exclamation mark.
Possibly Mac OS X just signals that the Wi-Fi does not connect to the internet or the likes. The Wi-Fi connection per se does work, also with password and with IPv6 enabled.

Ctrl and left click not working in DW CS5

When Im working in design view for some reason my links are not working when I press ctrl and left click. To make them work I have to right click and select follow link.
Its not a major problem because I can still carry on, but its annoying!

Mr Construction wrote:
When Im working in design view for some reason my links are not working when I press ctrl and left click.
I presume you're talking about Live View, because links don't work in Design view.
One thing you can try is selecting View > Live View Options > Follow Links Continuously, or select the option from the Live View Options menu in the Browser Navigation toolbar.
It works only for the current tab, but is useful if you're following a lot of links.

Satellite C655-S9521D Touch Pad Left Click not Working !

Similar Messages

Maybe you are looking for