Satellite L300D- Sometimes it takes ages to start up or doesn't start

Anyone able to help me?
Sometimes it takes me ages to start up my laptop and sometimes it doesn't start up at all and I get sent to the start up repair screen and that results in an unable to repair press ok to turn off computer message. When ever I do manage to start the laptop programs always stop responding with some responds lasting around an hour.
I have used the recovery discs I made when I was told to do so, the first time using the labtop about 5 times so far. Every time I restored the system it work fine for about 1 hour until I had to install the Windows updates.
Anyone able to help me on this problem of mine?

Hi
Well buddy, thats really strange and I think at the moment its not easy to say what the reason is for this.
Normally I would suggest you should reset the notebook back to factory settings using the Toshiba recovery disk but you have already tried. But the interesting thing is that you wrote that it works for one hour and you have to install Windows updates. Does the Windows updates causing this problem?
What happens if you dont make the Windows updates? Does it work?
Maybe the updates are causing an incompatibility issue if you have also installed 3rd party software.
In worst case its a hardware malfunction and your notebook should be checked from a notebook technician.
In my opinion it could be a problem of the HDD too. But HDD can be checked yourself with Drive Fitness Test for example.

Similar Messages

  • TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

    ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Handles on subclips doesn't start at beginning...why?

    I am using FCP 7.  I make a subclip.  Then I put the subclip into my timeline.  From my understanding, if you open up a subclip, the IN-point should be at the very beginning and the OUT-point should be all the way the end (by default). 
    My problem is when I double-click on the subclip on the timeline and SOMETIMES, not all the time, the IN-point doesn't start at the beginning.  Sometimes it's a few frames from the beginning and sometimes it's a second.  The OUT-point is all the way at the end, where it's supposed to be, so that's not a problem.
    Can anyone tell me why my IN-point is not at the beginning?
    Thanks

    Click on the subclip that is demonstrating this problem in the Browser, and once it is selected type Command+9 to see the item properties. Post a screen shot of the item properties here.
    Next click anywhere on the timeline, and type Command+0 {zero} to see the Sequence settings. Post a screen shot of your sequence settings here.
    In the meantime, anytime FCP begins acting strangely, trashing preferences is a usually recommended as the first step. You can download Preference Manager from Digital Rebellion (free) at:
    http://www.digitalrebellion.com/prefman/
    which will allow you to save your exisiting preference before trashing in case you want to return to them.
    MtD

  • Digikam 1.8 doesn't start [SOLVED]

    Hej,
    With the update to KDE SC 4.6 there was also the update to digikam 1.8 and kipi-plugins 1.8.
    However, when I want to start amarok, it doesn't start. When I start it from command line, it says
    digikam: error while loading shared libraries: libkipi.so.7: cannot open shared object file: No such file or directory
    So let's see:
    $ ls /usr/lib/ | grep libkipi.so
    libkipi.so
    libkipi.so.8
    libkipi.so.8.0.0
    Is that a packaging error or a release error, I don't really know.
    EDIT:
    new package release fixed the issue
    Last edited by locke87 (2011-01-27 12:27:52)

    Use the arch version.   It is actually built against the xorg version that you are using...  here is the relevant section of your log:
    [ 934.354] (EE) module ABI major version (6) doesn't match the server's version (7)

  • TS1314 New ipad mini syncing photos sometimes works quickly but more often syncing photos takes ages. The issue is intermittent. Any solutions. Raymond

    New Ipad mini syncing photos sometimes works quickly but most often syncing photos takes ages. Any solutions? Raymond

    New Ipad mini syncing photos sometimes works quickly but most often syncing photos takes ages. Any solutions? Raymond

  • My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

    my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

    If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
    **Imediately backup ALL your important data while you can still see things on the monitor
    Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
    nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
    perform SMC reset just to check:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • Satellite L300D-11A - Windows vista does not starts

    Hi,
    When I turn on my computer I get the following error message:
    Error Recovery for Windows
    Windows could not start up. A hardware or software change that was recently carried out may be the cause.
    If windows files are damaged or incorrectly configured, you can start the repair tool to help you diagnose and resolve the problem. If the power supply was interrupted during startup, choose start windows normally.
    Start startup repair tool (recommended)
    Start windows normally.
    After a while windows automatically selects the first option and try to load windows in recovery mode but then I get the following error:
    "The installed software could not start. Click ok to shutdown the computer".
    When it shutdowns and I start the computer again I get the same error message where I started with the 2 options of recovery mode or start windows normally.
    When I select the 2. option (start windows normally), it loads windows and after a while reboots and then I get the same error again with the two options.
    I have tried to boot from CD (recovery disk, vista bootable cd) and computer tries a while but then it gives up and start booting from HDD again. (I have altered to boot from CD first in BIOS).
    Does anyone know how to solve this issue?
    I have Toshiba laptop model nr: L300D-11A

    Hi
    If I understood you message, you have tried to boot from Recovery disk and from MS Vista CD and neither recovery disk not Vista CD worked.
    Is it right?
    Hmm thats very strange.. Maybe you could remove the HDD from the notebook and could put it into an external USB HDD case.
    Then you could format this HDD using another computer.
    After that you could try to reinstall the OS again
    Please also enter the BIOS and set it to default settings set the SATA mode to compatible and try to boot from Vista CD again
    Good luck

  • Satellite L300D-11A - DVD-drive issue and Blue Screen

    Hi
    I'm going out of my mind :o//
    My Satellite L300D-11A was delivered with a Windows Vista Home Premium, but I recently made a clean installation of the Windows 7 Home Premium 64 bits.
    Since then I have had problems with "Blue screen error's" comming randomly. Have purchased and installed a Registry clean up program, but that did not fix the problem. Any one else with that problem - and a possible solution.
    And now for my big problem. My CD and DVD drive is driving me crazy ;o) It's a Mat****a DVD-RAM UJ-850S ATA and from my search on the internet I have found that a lot of other Mat****a owners have had the same or similar problem(s). My drive will not regonize or play/read from CD's. DVD with movies or programs I can play. Burning CD's is not possible and burning DVD's is sometimes working, and other times not.
    I have read about the different fixes that is posted - also here on the Toshiba forum - Non of the suggested solutions is working for me - any new solutions that I could try.
    Seriously thinking about buying a external USB DVD drive/burner - but can someone please tell me why Toshiba does not get the fingers out off their B** and find a solution like it seams Sony has done.
    Look forward to any reply ;o))
    Someone once told me about this quote - "Don't wish it was easier - work on getting clever !" I need your help to get clever ;o))

    > But I do not now how/where to get the registration keys! I have tried looking for them.
    Are you talking about *Upper/Lower Filters* ?
    Follow these instructions for clearing the Upper/Lower Filters:
    Click on Start --> Run --> and type in 'regedit' followed by the enter key
    Expand the "HKEY_LOCAL_MACHINE" key (looks like a folder) by double clicking it (or clicking the "+" next to it.)
    Expand the "SYSTEM" Key
    Expand the "CurrentControlSet" Key
    Expand the "Control" Key
    Expand the "Class" Key
    Please look for a key containing the following string of letter and numbers:{4D36E965-E325-11CE-BFC1-08002BE10318}
    High light this key by left clicking once on it
    On the right hand side you are looking for "UpperFilters" and "LowerFilters" under the "Name" column, once you find these please delete them by right clicking on them and choosing "delete"
    Please exit the registry by clicking on the "X" in the top right hand corner of the screen
    Reboot your computer

  • Satellite L300D-11V - After new installation I have few issues

    I had a major crash a few weeks ago which took out the main partition on my hard drive (although the other partition seems to be fine) and I installed Windows XP Pro on a brand new hard drive with a view to installing Windows 7 in the near future.
    I found some drivers which I burnt onto disc and installed them on my new hard drive but now I'm having problems with the laptop in certain areas:
    - I can't get the USB ports to work at all even though I thought I installed the correct drivers.
    - I can't access the Internet via WiFi although the Ethernet connection works fine and I thought I had installed the correct drivers.
    - The Touchpad is running really slowly and in some cases, it takes an age to click on something like a "X" button to close software or anything else...
    Can anyone tell me how I can fix these problems as well as how to get my laptop fully up and running with Windows XP Pro.

    Your Satellite L300D belongs to PSLC0E models. I have checked Toshiba download page and your notebook is not supported for WXP operating system.
    Toshiba doesnt offer any tested driver for your notebook model.
    You have installed non-supported OS and now you want to have all hardware components work perfectly. How? Should someone search drivers for you or what?
    It will be better for you to use supported Vista you got as recovery image. To install Win7 is good idea and I can imagine your notebook will be supported and all necessary drivers will be available in the future.
    I will do the same with my A300.

  • Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?

    Since I've updated my iPad to iOS 6 it's running a lot slower especially when I scroll up and down and takes ages to load up on the App Store I know they got glitches but are they gonna be sorting this out as well ?

    Hi!
    I am also having issues with the device since updating to IOs 6. The time between clicking an icon, i.e. a picture, and the load of that picture takes longer enough to notice it. It did not happen before the update.
    I am also having problems with some applications, specially the Facebook application. When I click on my picture in the right bar of the app, it promps a window that ask me for share my location, etc.. and get freeze there.
    Regarding reseting the device, already done. It did not helped.
    Also, SIRI is very nice, but sometimes it stop working and I have to re-start the device in order to being able to use SIRI again. When it happens, it looks like SIRI is sending the information, but does not do anything after.
    It is understandable that they require some time to get the new IOs version working properly, but I dont like to be a Beta tester.

  • Satellite L300D - how to recover Vista without loosing data partition?

    Satellite L300D-22K
    Cdigo : PSLC8E-05500CCE
    windows vista (home premium)
    HDD has two (visible) partitions :
    - C:(Vista)
    - D: (Datos)
    after installing avast antivirus boot takes 20 minutes (corrupt File?, defective HDD?)
    Moved all my personal archives to partition D:
    Not sure if I can create bootable recovery dvds (system is unstable)
    1 *Id like to reinstall vista without formatting D partition* (where my data is)
    Find this guide for HDD recovery procedure
    http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    What steps should I follow?
    2 If HDD is defective, how can I re-install supplied OS (vista) to a new HDD ?
    3 Unrelated to the above, can I update to Windows 7 (clean install)
    32 or 64bit version?

    Hi
    I will try to help you.
    > 1 Id like to reinstall vista without formatting D partition (where my data is)
    >Find this guide for HDD recovery procedure
    >http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    >What steps should I follow?
    As far as I know on second HDD partition in folder HDDRecovery is saved recovery image. When you start HDD recovery installation (F8 at start-up) recovery image from partition D will be installed on partition C. In this case partition D will not be deleted. Just partition C will be formatted before recovery image installation starts.
    Just use F8 option and go to repair my computer. Just follow menu on the screen and choose option Recovery of factory default software.
    > 2 If HDD is defective, how can I re-install supplied OS (vista) to a new HDD ?
    After reading this question I see you didnt read users manuals document. You should create recovery media (recovery DVD) and this recovery DVD you can use for recovery image installation if there is some problem with HDD or you want to install original recovery image on new HDD.
    > 3 Unrelated to the above, can I update to Windows 7 (clean install) 32 or 64bit version?
    Of course you can do this. Visit please Toshiba download page on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and check if all drivers, tools and utilities are available there. Of course before you do this, create recovery DVD.
    If you have more questions you are welcome.

  • FAST enabled MView takes ages to refresh

    Hi All,
    I have a materlialized view which is based on a single fact table ( OAS_BALANCE_UNIONED 11,445,156 rows) and a bunch of dimension tables each containing limited number of rows (a typical start schema).
    The conditioins to make the mview fast refreshable have been met so the mview created successfully with the FAST option.
    The mview then worked just fine after than and had been refreshing FAST (6 minutes) for the whole day till other mviews started to refresh in the same time. Some of those mviews read from some of the base tables of the mview in question. Since then, the mivew has started to take ages (3 hours) to refresh. There is surely something wrong because the COMPLETE refresh was faster than that.
    Later, I stopped all the refresh jobs of the other mviews. Yet, the FAST mview still has the same problem of taking ages to refresh.
    When I monitored the session that refreshes the mview, I noticed in the "Long Ops" that
    most of the time is spent on a step named as "Hash Join" (it appears in the Message column). Hash join occurrs because of the outer join.
    Why my FAST mview suddenly started to take so long time to refresh?
    How can I make my FAST mivew really refresh fast?
    Technical Details are below:
    OS: Windows 2003 32-bit
    DB version: Oracle 10g R1 ( 10.1.0.2.0 )
    CREATE MATERIALIZED VIEW FACT_BAL_MV
    BUILD DEFERRED
    REFRESH FAST ON DEMAND
    WITH PRIMARY KEY
    AS
    SELECT B.cmpcode  BAL_KEY,
           B.CMPCODE,
           B.YR,
           B.PERIOD,
           B.BALCODE,
           B.CURCODE,
           B.REPBASIS,
           TO_NUMBER (B.YR || LPAD (B.PERIOD, 2, 0)) DIM_PERIOD_MV,
           D_CMP.DIM_KEY DIM_COMPANY,
           D_CUR.DIM_KEY DIM_CURRENCY,
           D_EL_1.DIM_KEY DIM_EL_1,
           D_EL_2.DIM_KEY DIM_EL_2,
           D_EL_3.DIM_KEY DIM_EL_3,
           D_EL_4.DIM_KEY DIM_EL_4,
           GRP_1_P_EL.DIM_KEY DIM_GRP_1_P_EL,
           D_GRP_1_B_EL.DIM_KEY DIM_GRP_1_B_EL,
           D_GRP_1_K_EL.DIM_KEY DIM_GRP_1_K_EL,
           D_GRP_2_D_EL.DIM_KEY DIM_GRP_2_D_EL,
           D_GRP_3_E_EL.DIM_KEY D_GRP_3_E_EL,
           B.ROWID X_OB_ROWID,
           D_CMP.ROWID X_CMP_ROWID,
           D_CUR.ROWID X_CUR_ROWID,
           D_EL_1.ROWID X_EL_1_ROWID,
           D_EL_2.ROWID X_EL_2_ROWID,
           D_EL_3.ROWID X_EL_3_ROWID,
           D_EL_4.ROWID X_EL_4_ROWID,
           GRP_1_P_EL.ROWID X_GRP_1_P_EL_ROWID,
           GRP_1_P.ROWID X_GRP_1_P_ROWID,
           D_GRP_1_B_EL.ROWID X_GRP_1_B_EL_ROWID,
           D_GRP_1_B.ROWID X_GRP_1_B_ROWID,
           D_GRP_1_K_EL.ROWID X_GRP_1_K_EL_ROWID,
           D_GRP_1_K.ROWID X_GRP_1_K_ROWID,
           D_GRP_2_D_EL.ROWID X_GRP_2_D_EL_ROWID,
           D_GRP_2_D.ROWID X_GRP_2_D_ROWID,
           D_GRP_3_E_EL.ROWID X_GRP_3_E_EL_ROWID,
           D_GRP_3_E.ROWID X_GRP_3_E_ROWID
      FROM CLVE_STAGING.OAS_BALANCE_UNIONED B,
           FINANCE.DW_DIM_COMPANY D_CMP,
           FINANCE.DW_DIM_CURRENCY D_CUR,
           FINANCE.DW_DIM_EL_1 D_EL_1,
           FINANCE.DW_DIM_EL_2 D_EL_2,
           FINANCE.DW_DIM_EL_3 D_EL_3,
           FINANCE.DW_DIM_EL_4 D_EL_4,
           FINANCE.DW_DIM_GRP_1_P_EL GRP_1_P_EL,
           FINANCE.DW_DIM_GRP_1_P GRP_1_P,
           FINANCE.DW_DIM_GRP_1_B_EL D_GRP_1_B_EL,
           FINANCE.DW_DIM_GRP_1_B D_GRP_1_B,
           FINANCE.DW_DIM_GRP_1_K_EL D_GRP_1_K_EL,
           FINANCE.DW_DIM_GRP_1_K D_GRP_1_K,
           FINANCE.DW_DIM_GRP_2_D_EL D_GRP_2_D_EL,
           FINANCE.DW_DIM_GRP_2_D D_GRP_2_D,
           FINANCE.DW_DIM_GRP_3_E_EL D_GRP_3_E_EL,
           FINANCE.DW_DIM_GRP_3_E D_GRP_3_E
    WHERE     B.CMPCODE = D_CMP.CODE
           AND (B.CMPCODE = D_CUR.CMPCODE(+) AND B.CURCODE = D_CUR.CODE(+))
           AND (B.CMPCODE = D_EL_1.CMPCODE(+) AND B.EL1 = D_EL_1.EL_CODE(+))
           AND (B.CMPCODE = D_EL_2.CMPCODE(+) AND B.EL2 = D_EL_2.EL_CODE(+))
           AND (B.CMPCODE = D_EL_3.CMPCODE(+) AND B.EL3 = D_EL_3.EL_CODE(+))
           AND (B.CMPCODE = D_EL_4.CMPCODE(+) AND B.EL3 = D_EL_4.EL_CODE(+))
           AND (GRP_1_P_EL.CMPCODE = GRP_1_P.CMPCODE(+)
                AND GRP_1_P_EL.GRP_CODE = GRP_1_P.GRP_CODE(+))
           AND (B.CMPCODE = GRP_1_P_EL.CMPCODE(+)
                AND B.EL1 = GRP_1_P_EL.EL_CODE(+))
           AND (D_GRP_1_B_EL.CMPCODE = D_GRP_1_B.CMPCODE(+)
                AND D_GRP_1_B_EL.GRP_CODE = D_GRP_1_B.GRP_CODE(+))
           AND (B.CMPCODE = D_GRP_1_B_EL.CMPCODE(+)
                AND B.EL1 = D_GRP_1_B_EL.EL_CODE(+))
           AND (D_GRP_1_K_EL.CMPCODE = D_GRP_1_K.CMPCODE(+)
                AND D_GRP_1_K_EL.GRP_CODE = D_GRP_1_K.GRP_CODE(+))
           AND (B.CMPCODE = D_GRP_1_K_EL.CMPCODE(+)
                AND B.EL1 = D_GRP_1_K_EL.EL_CODE(+))
           AND (D_GRP_2_D_EL.CMPCODE = D_GRP_2_D.CMPCODE(+)
                AND D_GRP_2_D_EL.GRP_CODE = D_GRP_2_D.GRP_CODE(+))
           AND (B.CMPCODE = D_GRP_2_D_EL.CMPCODE(+)
                AND B.EL2 = D_GRP_2_D_EL.EL_CODE(+))
           AND (D_GRP_3_E_EL.CMPCODE = D_GRP_3_E.CMPCODE(+)
                AND D_GRP_3_E_EL.GRP_CODE = D_GRP_3_E.GRP_CODE(+))
           AND (B.CMPCODE = D_GRP_3_E_EL.CMPCODE(+)
                AND B.EL3 = D_GRP_3_E_EL.EL_CODE(+));
    CREATE INDEX FINANCE.DW_FACT_BAL_MV_INX
    ON FACT_BAL_MV (X_OB_ROWID);
    SQL> select count(X_OB_ROWID) from FACT_BAL_MV ;
    COUNT(X_OB_ROWID)
             11444816
    Elapsed: 00:00:27.85
    SQL> select bytes/1024/1024/1024 GB from
    user_segments where segment_name='FACT_BAL_MV';
            GB
    4.4296875search id: redcorolla

    Hard to say why the refresh is now slow. Possibilties include
    * system resources implemented by the fast refresh
    * something changed on the query making the background query run slowly
    Look at the query first. 18 tables, with almost every join an outer join. Some of the tables appear more than once in the query.
    Get an executioion plan to see how the query is being executed.

  • When i log on to thunderbird, the in box has the message, 'building summary file', this then takes ages to do . how do I stop it doing this every time I log on?

    Hello,
    This problem has only started happening in the last few days. Every time i log on the get emails, the inbox has a message saying 'building summary file'. it then takes ages to do this. i have tried deleting most of the in box and compacting the file but it still continues.

    Try restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • My ipod touch 2g a1288 wont restore. The download takes ages then ipod puts itself back in2 DISABLED mode, HELP!!

    Ok so my ipod is making me really angry. If I don't figure this thing out today after trying for so long I think I'm going to take my car and repeatedly run the thing over until its in a million pieces.
    Right now heres the long story which ill try keep kinda short but I do need to explain whats happened thus far
    Ipod touch (2G), Mondel: A1288 which has gone into disabled mode and is basically useless at the moment.
    Now I've done the thing where you hold the two buttons while plugged into laptop until itunes detects ipod in recovery mode. Then I try to hit restore, this starts up the download/ update thing which will not download because here in the dark ages of New Zealand our internet is slow. So because its so slow the ipod touch takes itself back into disabled mode! ahhhhhhhhhhhhh so FRUSTRATING
    Now I'm aware that I can pre-download the firmware (which will still probably take ages but may save the ipod from timing out and going back into disabled screen) and then just hit control and select it when ipod is detected in recovery mode by itunes. The only thing wrong with doing this however, is when I go to the site to get the firmware from http://http://www.felixbruns.de/iPod/firmware/ and look in the drop down menu of 2G ipod touches, I don't see my model listed there so I'm wondering what firmware I can download for the A1288? Is it compatible with a different version? because it wasn't even listed in the drop-down menu of ipod touches.
    I just wan't the thing going again! they put these things into technology that make it useless because they know the average joe like me will just give up trying to fix it and buy a new one. Well not this time, if I cant fix this, I'm going to run the thing over and that will be that!
    Many thanks for reading my speal, I hope somebody can help

    lol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
    Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
    Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific?

  • It take ages to download and install flash player

    i realize that from some time it take ages to download and install adobe flash player!! is there a problem with the server i just cant install it i use windows 7 and windows 8 in both i download but wen try to install it starts to install and it says it takes to long to download and stops instalation   what can i do to install flash player? thank you very much

    Try the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

Maybe you are looking for

  • Line item Net value is not coming in Header Net Value

    Hi All, I have four conditions 1) A condition with condition cat.Price this is annual price condition and condition value comes from condition record. 2) B condition with condition cat.Discount & Surcharge this is monthly dis. and condition value com

  • 20.1-Inch External Monitor

    I'm looking at buying a MacBook Pro later this summer, but I'm interested in buying a new 20.1-Inch monitor in the next week and I want to know which one is better. I will use it for gaming and video playback and once I get my MacBook Pro the monitor

  • Calculating max image size for PNG inside an app?

    This should be simple, considering that Apple has published a formula for the max image size that an iPad will display. Here are the details ... I'm creating a "zoomable" image for use in an app. The PNG is fed into the app via an iframe. It's zoomab

  • Best way to blog with multipel photos?

    If I add a blog entry to my website about 100 times per year and I've put an image on each entry that can be clicked to link up to the days photos usually up to around 20 shots/blog entry. This creates a photo page each time. I'll end up with 100 pho

  • ALE - Receiving problem

    Hello,         I am sending material in bulk quantity more than 1000. There I am getting message in WE02 it is displaying status in ORANGE color with following message. Kindly suggest how to solve this problem. <b> IDoc: 0000000000000025 Status: IDoc