Satellite L355D - No sound after upgrade to Win 7

I have downloaded all of the drivers from Toshiba, upgraded the BIOS, and still nothing. 
I get sound from headphones, but not the speakers. Volume level shows activity, I can see the ReakTek High - Def Audio as installed and Windows says it's working proplely...and yet...nothing. Sound was working fine on Vista before the upgrade, so I know the speakers are good.
I have checked running services, and audio is running and working, as well. Every solution I have found online gives no results! Ack!
I'm going nuts trying to figure this out! Any ideas?!

Can you give me your model-part number as well? It should be on the label on the bottom as well and begin with a 'P'.
Did you reinstall these?
Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904; 09-04-2009; 69.55M)
Toshiba Speech System(v1.00.2520; 11-10-2009; 21.35M)
Toshiba Value Added Package for Windows Vista/7 (64)(v1.2.33_64; 11-09-2009; 45.79M)
On the other hand, maybe upgrading to Windows 7 was a coincidence. Sometimes the computer acts as if headphones are always connected if there's a problem with the port itself. Try playing audio while removing and reinserting the headphones repeatedly, even 10 or 20 times to see if the speakers will begin to work. Also, check that the ports not loose and that there's no foreign object inside the port.
- Peter

Similar Messages

  • Satellite Pro A10: No sound after upgrade to Win XP Home SP2

    Hi,
    Just used the recovery discs on my Sat Pro A10, no problem with sound, and then upgraded XP Home to SP2, no sound.
    From what I have read elsewhere, this is a problem, and there doesn't appear to be an answer. I have spent hours searching for updated drivers to no avail.
    I have also contacted Toshiba support, after much huffing, and puffing they pointed me to the following driver, 5.12.01.3542, which is the same as the one I already installed, and does not work.
    Surely there must be something out there that works.
    Ant.

    Install the newest available sound driver fro this sound chip and perform the all the Windows updates available on the Microsoft page!
    Update simply the whole OS!!!
    http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us
    Note; possibly you have to reboot the notebook and have to connect to this site several times to get all the available patches.

  • System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

    My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
    However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
    I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
    It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

    Satellite L75D-A7283
    It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
    If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
    All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
       Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
    -Jerry

  • HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate

    HP Compaq CQ60-215dx: sound will not switch to headphones after upgrade to Win Vista 64bit Ultimate
    what can I do?

    Uninstall the current audio driver and install it again.
    other option is trying driver from microsoft update.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • No sound after upgrading to Vista on Satellite U-series - solution

    Hi I had the problem that I didnt have any sound after upgrading to Vista Business.
    After several attemps to get a solution from Toshiba I found it out myself.
    Here are the steps to solve this problem:
    1. update Bios to 3.5 version
    2. Do a clean Vista installation
    3. Install the Value added Package
    4. Install the audio driver
    5. Install the fix "mute off"
    Should work now.

    Hey wow, thats really nice. Already bookmarked it. :)
    We users and me (freak ;) ) appreciate some good solutions.
    Thx dude

  • After upgrading from Win 8 to 8.1 my DVD RAM GT80N SATA Drive is no longer working

    After upgrading from Win 8 to 8.1 my  DVD RAM GT80N SATA Drive is no longer recognizing discs. When I first put a disc in the drive runs for a bit and then stops. I've tried updating the driver but it says it has the most current driver. Under manage, it does not show any error codes and it says it is working correctly. I've looked at the regedit and it does not have any of upper and lower filters. I've tried disabling, rebooting, and reenabling. What am I missing? Another issue I've had since upgrading is that my network adapter needs reset several times a day in order to remain connected to wifi.

    Hey hvbnfrgvn,
    Thank you for the information on your HP Pavilion g7-2270us Notebook PC.
    I suggest following the steps in this document for Drive Cannot Read Discs (Windows 8).
    If your CD/DVD Drive Is Not Detected (Windows 8), follow the steps in this document.
    I hope this information helps, please keep me posted on how it goes.
    Best of luck and have a great day!
    I worked on behalf of HP.

  • Garbled sound after upgrade to ios7.0.6 for ipad

    pls advise if you experienced garbled sound after upgrade to ios7.0.6 for ipad2. thanks

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • After upgrade to Win 8, the key's has changed

    After upgrade to Win 8, the key's has changed, for example, when i am trying type @ but the key has changed as ". so please help me to rectify the problem.

    Hi,
    What was the keyboard language BEFORE and what it is NOW ? Did you use SAME KB language for both Windows 7 and Windows 8 ? When click to the KB (bottom right corner) what do you see ? This is mine:
    Please use instructions from the following link to fix:
       http://windows.microsoft.com/en-AU/windows-vista/C​hange-your-keyboard-layout
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT4623 no sound after upgrade

    My Iphone 4s had no sound after upgrade to ISO 6.
    Please help me, thanks

    Plug the headphones in.
    Adjust volume.

  • No sound after upgrading

    I keep losing the sound after upgrading to OS7 on my 16g 4GS. It comes and goes with no identifiable pattern.

    According to your motherboard specification you have Integrated AC97' Realtek ALC658C 6-channel audio.
    Try installing the Vista driver directly from Realtek:
    http://www.realtek.com.tw/downloads/
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • What happened to my input/output sound after upgrading to mountain lion?

    what happened to my input/output sound after upgrading to mountain lion?

    Maybe these will help:
    Sound – No Sound After Upgrade
    Sound Levels - Troubleshoot

  • Icloud stopped after upgrading to win 8

    icloud stopped working after upgrading to win 8.
    Says "map cannot be found".
    Any suggestions? Or will it simply not work with Win 8?

    Solved.
    Needed upgrade to 2.1

  • Beep app stopped making sound after upgrade to 2.6.22 kernel

    hi, beep app stopped making sound after upgrade to 2.6.22 kernel Jul 29 2007; my PC still beeps on reboot; i searched for the beep package at arch home page and found
    the beep package maintainer's name: Damir Perisa    how do i contact him if there are no other fixes for beep no longer making any sound? thanks in advance for your quick
    response; resident, a happy arch user

    Check if the PC speaker kernel module is present:
    lsmod | grep pcspkr
    If that returns nothing, then check /etc/rc.conf for these line:
    MOD_BLACKLIST=(foo)
    MODULES=(bar pcspkr)
    MOD_BLACKLIST must NOT contain pcspkr, while adding it to MODULES should autoload it on boot.
    If you want it to load right now, then just enter:
    modprobe pcspkr

  • Win 8.1 activation issues on Satellite Pro C850-1EQ after upgrade

    Hello everybody!
    I face a problem after upgrading my TOSHIBA SATELLITE PRO C850-1EQ preinstalled windows version 8 to 8.1.
    After installation windows demands the product key in order to activate windows 8.1, but I haven't this activation key.
    I called Microsoft (Greece) but couldn't help me and told me to call Toshiba (Greece).
    The man from Toshiba's technical support told me to call back to Microsoft!
    Also, he told me to check here (https://www.toshiba.eu/innovation/generic/windows8_1-upgrade-stepbystep/) before I start the process. Step No. 7 says "Remember your Windows password. You may need to enter it after updating."
    Now I returned back to Win 8.
    Is there a way to learn my activation key before the installation of w8.1?
    I tried to find that using various tools but no one finded the key.
    Plus, after the installation of 8.1, a message says:
    +Error code: 0xC004C003+
    +The activation server determined the specified product key has been blocked+
    I trust Toshiba and I want to use the latest version of w8.1.
    I would be greatful if someone technician from Toshiba could help me with this issue.
    John (from Greece)

    Hi
    Yes, the preinstalled *gets automatically activated* when I restore or refresh my pc and I do not need the activation key.
    When I upgrade to windows 8.1 it asks me the activation key in order to activate the new version.
    Before the upgrade, yes, I updated win 8 and the drivers too. I always keep my pc updated.
    What do you mean:
    +Try this: create the Toshiba Recovery DVDs (or USB flash memory stick). Use the Recovery medium in order to recover the notebook back to factory settings. Update the Windows 8 to latest state and then perform the upgrade to Win 8.1+
    Windows 8 is in a hidden particion in my PC, so I don't need to create recovery disk.
    Or do you mean anything alse?
    Thank you for your reply

  • No sound on my G580 Notebook after upgrading to win 8.1

    SInce upgrading to Win 8.1 on my 64bit Lenovo G580 notebook I kept receiving a message about Dolby driver problems (my sound did work though).  Then I thought I would get rid of this message - update Dolby drivers - and followed advice on the internet.  As I remember, this advice told me to uninstall all sound / dolby drivers and then install new drivers.
    In doing this I somehow also uninstalled Dolby PCEE4 drivers for my G580.
    I subsequently installed the latest G580 conexant drivers but with no success.  I can "see" that the drivers are working (when I click on the sound icon bottom right of the desktop), but there is no sound.  Other internet advice has been to obtain PCEE4 drivers - but I don't find any files from Lenovo to download.
    I've tried to reload Dolby Advanced Audio V2, but it ends prematurely with the prior message that PCEE needs to be installed.
    Can someone please assist?

    http://support.lenovo.com/gb/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g580-no...
    are you sure its not the realtek drivers as some have said its in there
    Thx dave
    yoga 2, lenovo b540
    3 custom gaming pc systems

Maybe you are looking for

  • Changing from Windows to OSX, can I use the same serial number, how to do it?

    I purchased elements 10 from Adobe online and installed on a windows machine, I now have an IMac, can I install use my serial number on my new machine? I have downloaded elements 10 from my account however, it is a windows file? Is there away around

  • How to know the amount of RAM Oracle is recognizing on the Server...?

    I have 10g Rel 2 running on 4 CPU Win2003 Adv Server, which has 8 GB of RAM, but when I look at the Oracle Ent.Mgr. Host page under 'Configuration' it shows 'Memory Size' as 2048 MB, in fact it shows the correct CPU count and hard disk size. What can

  • Seeburger module configuration

    We are using this module configuration for converting EDI D96A format to XML: 1     localejbs/CallBicXIRaBean     Local Enterprise Bean     bic 2     localejbs/CallSapAdapter     Local Enterprise Bean     0 bic     destSourceMsg     MainDocument bic 

  • Mouse event problem in jLabel

    I don't want to change the Text of a label once i click on it for the second time.This is the code i wrote for it     private void display(java.awt.event.MouseEvent evt) {                                   try{           if(evt.getSource().equals(jLa

  • PS Elements 4, Albumseiten in A4 hoch erstellen

    Ich möchte im Adobe Photoshop Elements 4.0, d.h. im Organizer ein Fotoalbum erstellen. Alle Vorlagen der Kreation sind leider auf A4 Querformat ausgerichtet. Wie kann ich ein Album im Hochformat erstellen? R. Weiss