Satellite M100: touchpad corner functions do not work

Hello
My Satellite M100 quick launch functions on my touchpad have quit working. The touchpad works fine but the corner functions on it dont. It wont even recognize me hitting the corners when I go to the quick launch setup area.
I reinstalled the touchpad drivers. I cant find anything else on this site or the internet dealing with what I have.
Please help.

Hi
Are you talking about Touch and Launch utility? If yes, start this application manually and check all settings. Be sure this utility is not disabled.

Similar Messages

Satellite L500 - touchpad & CD-rom are not working anymore

Dear Sir
I have Satellite L500 laptop. I have problem with the touch pad and cd-rom both losses the functionality.
Once I click on the touch pad cursor not moving and it button also not working.
Please give me solution on it.
I have try to setup by default setting loading then also it not working.
Please give me solution on it.
Thanking you
Sandeep.

Best way to test functionality is to install original recovery image again and test hardware with factory settings.
Please use recovery DVD discs, if you have created them, or use HDD recovery option - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

Satellite M100-180: Fn keys does not work & cant add Kubuntu

OS WXP
Display Driver ATI
1.FN Key: is not working.....
2.I can't add Kubuntu (Linux OS) cuz the Display Driver(which I update it) or cuz of the Bios(Which I update it)........
what is the solutions here??? Thanks

Hi there,
Thanks for the response....
The second issue of Linux OS has been solved, the issue was caused by the ATI card which was not supported.
Regarding the FN issue, I can use FN+F1 & F2 & F3 & F4 & F5, for the rest of the option of F6 & F7 & F8 till F12 is not working with me!!
I checked the usage of the buttons and its all working, only with the feature of using it with Fn key its not working!!! This issue is on Windows XP.
I tried to update and to re-install the keyboard and re-install the FN features but nothing happen.
Before it was working great.
Just to remind my notebook is Satellite M100 series.

Satellite L550-207 some function keys not working

Hi,
I've read a lot about this problem, but got no solution for mine: all funtion keys except F8 (wireless) and F9 (enable/disable touchpad) work fine.
Already insalled VAP - reboot - and Flash Card Support Utility, does not seem to help.
I am using Win7 -64bit (with latest updates), newest bios, firmware and newest version of all pre-installed toshiba products.
Any idea for help?

Hey,
FN+F8 disable or enables WLAN card and FN+F9 controls the touchpad functionality. So if all other keys work, it sounds like you have forgotten to install WLAN and touchpad driver. Have you installed them?
All drivers and tools you can find on this page:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Satellite Pro A120-10W - Function keys not working since hard drive wipe

Hello,
I have a Satellite Pro A120-10W running Windows XP Pro SP3, and have just had my hard drive wiped, because of viruses. Everything seems to work fine, but I cant use the function keys to change the brightness etc. I have looked at various help forums however most seem to give answers for Windows 7 or vista. 7
Can someone help please?
Thanks in advance.

Hello
As you can see in other threads, you need special drivers/tools for FN keys to get them working because there is no Windows standard driver for these keys.
Anyway, you have to download Common Modules as Akuma wrote. After installation the keys should start working again.
You can download the tools on official Toshiba website.
If you have problems with installation or it was successful, just post some feedback. ;)

Satellite L300 - Hot key function is not working

After the superb help I got from Jimi I'm hoping I can solve my last problem, I have changed my OS from Vista to WXP and I have managed to get all drivers working even though some from the Toshiba site dont work like the Wi-Fi, I have managed to acquire from other places. The only one I cannot get to work is the hot keys , It states TOSHIBA COMMON MODULE NOT FOUND! Everything else works o.k. after using Nlite (Cracking Bit Of Kit)
My Laptop Is the Sat L300 - 1AQ Model PSLB8E-OOKOO
Many Thanks for your Help

Hello
Ivan is right. You must install Common modules. It must be installed at first before you start to install any other Toshiba designed tools or utilities.
Common Modules is kind of basic software and all other tools can be installed additionally. Because of that it is very important to install Common Modules first.
Good luck!

Satellite L500-PSLS9A-02C012 function F8 not working

Hey guys basically I reinstalled windows 7 ultimate 32 bit onto my laptop and my function (FN) key stopped working so I installed TVAP and flash card support and a few others from the Toshiba website but heres my problem...
When I press FN nothing shows up on the top of the screen like it used to but I can use F6/F7 to change the brightness F5 to change the display ect all still work bar F8 therefore I cant turn my wireless on which is a real pain.
Any help would be very muchly appreciated,
Regards Ross.

>... I reinstalled windows 7 ultimate 32 bit onto my laptop and my function (FN) key stopped working...
You have reinstalled Win7 using original Toshiba recovery image?
Generally speaking all you can do now is to reinstall TVAP or flash cards support utility.
Have you tried to restart flash cards? Do this and press FN button several times.

Satellite C660-17L - Some TouchPad functions are not working

My touch pad functions are not working:
- I can't use it to scroll up and down
- I can't use it to zoom.
What should I do to fix it?

Yes the model number is Satellite C660-17L
And no I didn't install the touchpad driver.
I Have had this laptop for less than a month, I started it one day and tried to scroll but it didn't work.
Also i tried to search for the advanced settings under the mouse option but I couldn't find it.
When I enter the search directly into the search bar, the mouse option comes up but when I click on it, it asks me if I want to uninstall the synaptics driver.
I have no idea what this means but I click no and it comes up with all the mouse setting options.
What should I do now?

Satellite L850 - Special function key not working properly

Hi Everyone,
I had Satellite L850 (pskg8a-07f001) running windows 8 64 bite for just 2 months.
Just within this week, the special function key not working, each time I start the pc, i have to go into toshiba desktop assist then function key then click ok, it will working.
But the touch pad has been set as enabled, also under keyboard setting has been set as special function mode. But don't know why each time start the pc have to go into function key box then click ok.
When I bought it everything is ok, i can use the special function key to turn up and down the volume and disable wireless...etc
Please advise. Thks a lot!

Take a look here:
Function key changes in Satellite and Qosmio 800 series
http://aps2.toshiba-tro.de/kb0/TSB2903E00000R01.htm
You can use the traditional FN + F key mode or just an F key mode.
This can be enabled and disabled in BIOS or the HWSetup
In BIOS go to Advanced -> System configuration -> Function key mode
This mode can be changed
Also be sure that Function Button option is enabled too

Push function is not working

Hi
The Mail push function is not working properly. Sometimes it works for a couple of day, sometimes it is not working anymore. Do anybody know a solution for this?
Thanks,

Make sure you have ticked the Tap to Click option under Trackpad in your System Preferences. There you can also choose how right-clicking should work (default is click, actually push down on, Bottom Right Corner of the Trackpad I think).
Did that answer your question?

Autofill function is not working, 'window' sticks through it not functional!

autofill function is not working, 'window' sticks through it not functional!

Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Quit and relaunch Safari.
2. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar. Also select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
3. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
4. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

"Open In.." function is not working

Hi, "Open In.. " function is not working on my iPad since the first time I recieve it..
it once worked twice, and it took a long time to load PDF file, but never worked again
the apps list is there, but when I click the app, nothing happened.
please do help,
thanks

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
Also close all apps completely : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Copy Function is Not Working properly In Order Management

Hi,
Description-
When an order with remnant model is copied, it copied only the topple model line and they include items attached to the top model line. It doesn’t copy the
option class lines and the option item lines (unshipped and shipped).
Example-
Enter an order with for pd-pto-model. See order#21231.The ordered quantities and structure of the model is shown below:
pd-pto-model 5 qty
pd-std-item1 (included item) 5 qty
pd-pto-oc (option class) 5 qty
pd-std-item1 (included item with rfr checked) 5 qty
pd-std-item2 (option item with rfr checked) 5 qty
pd-std-item3 (option item) 5 qty
Booked the order and pick relased the order. While shipconfirming only shipped 5 qty of pd-std-item3 and staged the rest. On querying the sales order, the line status is seen correctly as follows:
pd-pto-model Closed
pd-std-item1 (included item) Picked
pd-pto-oc (option class) Closed
pd-std-item1 (included item with rfr checked) Picked
pd-std-item2 (option item with rfr checked) Picked
pd-std-item3 (option item) Partially Interfaced to receivables
Copied this order from the order header. The new order# is 21232.On querying the order, I see only 2 lines as follows:pd-pto-model.
Anyone can help me on this issue.
Thanks,
Chinna

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Select() function is not working properly in solaris 10.

Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
Thanks a lot.
Regards,
Srikanth.

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Satellite M100: touchpad corner functions do not work

Similar Messages

Maybe you are looking for