Satellite M40X - cannot install the LAN driver

Heya,
I wonna install a LAN with my notebook and my home-pc. There is just this one problem, that my M40X don't like it. I connectet my homepc and the toshiba with a cross-over calble. It worked at my home pc. Both winXP. The toshiba one shows me "cannot find network-cable".
I installed the driver u can get here in the page, nothing. all firewalls are down.
I know that there is a patch for win2000 but not for winXP.
can someone help, please.

Hi
Are you sure that the cable is plugged solid?
Did you try to connect the unit with different cable?
In my opinion you can try to run the Toshiba Pc diagnostic tool and ConfigFree and check the result.
Sadly, I dont have any informations about some patches
Bye

Similar Messages

  • How install the LAN driver for Satellite Pro A120

    Actually, my problem is that i didnt know how to install the lan driver on my Satellite Pro A120 to connect throug the net.
    The issue that theres no installation to do to complete the install.
    And theres other issue that i need the Ethernet Controller
    My laptop was vista OS installed, But i change it and put Windows XP instead
    Plz help me

    Thats very easy to install the LAN driver.
    On the Toshiba website you can search for it:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download drivers
    Select the right notebook. In your case its the Satellite Pro => Satellite Pro A Series => Satellite Pro A120.
    And then choose at operating system Windows XP and at Driver type LAN Driver.
    Click on search and you will get the right driver.
    Download and install it. How this works did Jimi said.

  • Re: Satellite P870 - Cannot install Intel display driver

    Hi,
    I have tried from both Intel and from Toshiba and cannot install the Intel driver.
    Without the Intel driver I cannot install the Nvidia driver, I have tried downloading the Intel utility installer from Toshiba as well as the Intel HD 4000 driver.
    I do not want to do a system recovery. Can anyone point me in the right direction?

    Thanks the model number is P 870 02k00s
    It came with Windows home 7 64 bit pre installed. I upgraded to to Pro for work.
    It was working good until last week where someothing made the intel driver start showing it had a fault at this point i uninstalled the driver hoping it would reinstall and i could go on my merry way.
    After this point i tried downloading the driver packs from both toshiba support and intell but both dont work.
    Currently the intell display adapter is listed as video controller (VGA compatible).
    The NIVDIA driver staes i need to install the intel first

  • Satellite L300-15V - The system cannot install Wireless LAN driver

    After installed all drivers for that machine, the system shows that it need to install Wireless LAN driver, but i did!!! What's going on? Help! I can't make wireless net home!!!!!!

    I assume you have tried to install the Realtek WLan driver. Is it right?
    Go to this Toshiba WLan driver page:
    http://aps2.toshiba-tro.de/wlan/
    and check if you can install the Atheros Wireless LAN driver or the Intel PRO/Wireless 3945/4965/5100/5300 driver.
    Greets

  • Satellite M60-176: Cannot install the graphic driver

    Greetings,
    i'm trying to reinstall the original Toshiba driver from the site
    on a satellite M60-176 with mobility ATI X700 256 MB dedicated
    version is :
    <name>VGA Driver (ATI M24C/M26P)</name>
    <version>V8.121.050322a-021880C</version>
    <comment>VGA Driver (ATI M24C/M26P)</comment>
    The error message occurs when i install the software package : Setup copy dll, install some component and stop at driver installation slide with message ( translation from french ) "setup was not able to finish installation, try to configure your display adapter with standard vga one before executing setup
    When i try to detect the card with control pannel and chose the CX_21880.inf file in 2KXP_INF, the process copy the dll, but at end complains that "a problem occurs in installation of Radeon X700" and then error is "ACCES DENIED"
    I've tried to follow sequence as :
    uninstall all, go to safe mode, delete video card ( i can't set a proper VGA other card )
    I'v tried a driver removal tool ( Driver Cleaner pro ) then restart XP then try to reinstall ATI original toshiba driver : same problem
    TOSHIBA support told me to upgrade to bios 1.60 : same problem
    I can't conclude that original toshiba video driver can't be installed on a toshiba....
    Actually i'm running display with standard vga at 1152x864 32 bit color with slow rendering
    I'm really asking for help, because i don't know how to do...
    Regards,
    Ludovic

    Hello Jaba,
    of course the reinstallation should fix the problem,but the binary image will erase all my data or configuration "customized"
    I think that there was a mismatch in installation procedure or transaction...
    Now i've finally fixed it.
    Here it is how :
    I've turned off the windows logger as i've seen that registry keys were locked because wrong privileges
    I've reassigned the privilieges to current user ( ludovic )
    After , i've suppressed all driver with standard uninstall
    Then i've supressed all dll
    Tnen i've searched for ATI key in Current control set * , services , HKEY local machine software
    Then i've procedeed reinstallation => it works
    So Now i've the driver installed
    If you have the same problem, i suggest user to consult following articles :
    http://www.tweakxp.com/article37536.aspx
    http://www.rage3d.com/board/showthread.php?s=&threadid=33606840
    Hope it will help.
    Regards,
    Ludovic.

  • Re: Portege R400 - Cannot install the 3G driver on Windows 7

    Hi there,
    I've installed Windows 7 Beta on my R400 as Windows Vista is impossible to use on the R400 (way to slow).
    Everything is working just fine except for the 3G module.
    I am not able to install the drivers.
    The last status info is "copying new files" before the installer starts rolling back automatically and finishes with the "not installed" message.
    I tried redownloading the file, but no luck
    Any idea?

    so is there a solution? I tried extracting the driver by myself, but haven't found a way to unpack the .msi file. It's a Novatel device, but the Novatel homepage says that I should contact the OEM, which is Toshiba...
    Anyway, I just called the Toshiba hotline and they said they have no idea whatsoever. :(
    EDIT: I started a hole bunch of cpu eating programs to slow the installer down and the last status info is "registring products" before it start rolling back. Any Idea what the installer is doing then causing it to fail?
    EDIT 2: I managed to extract the .msi and installed all drivers manually, works perfectly. No idea why the installer fails.
    Message was edited by: chineseleper

  • Satellite M30x: Cannot install the VAP - ID-ERR-NOTINSTALLTVALTZ

    Hi,
    I have got a little problem with my Sat M30x and Vista system. I need to change the cooling method to slow down the CPU fan as I did in WinXP using Toshiba Power Saver.
    Unfortunately, the utility does not seems to be available for Vista.
    I have tried to search for some solution which might be Toshiba Valued Added Package. It is supposed to add the method change option into Vista power settings, but I am unable to install the program - ends with an "ID-ERR-NOTINSTALLTVALTZ-MESSAGE" error.
    General advice is a bios update, but the latest version I have found - 1.90, ATI video - is already installed.
    Please, is there any way to get rid of the noisy fan without downgrading the OS?
    Thanks a lot.

    I wonder where you have found the VAP (Value Added Package) for this notebook model.
    I checked the Toshiba European driver page and found some drivers for Visa 32bit in Archive area
    But there is NO VAP!!!!
    Therefore Ive got only one explanation why this error occurs; you have tried to install this software which is NOT compatible with Sat M30X!!!

  • Cannot install adobe flash drive

    I cannot install the flash drive on my mac laptop.  My videos are runing very slow.

    What is "adobe flash drive"?

  • Satellite A300D-15B PSAKCE - Cannot install the Win XP 64bit sound driver

    Hello all,
    This is my first post here after lurking for the last week or two, My hope is that somewhere here there is help and hence hope!
    I have a wonderful Toshiba A300D-15B PSAKCE with 4GB/O RAM, however I am suffering from some problems that the holy SEARCH function cannot solve. I use this laptop as a development box for uni/work alas...
    After an absolute nightmare with Vista32 and Vista64 I decided to go back to windows XP32, however this wont install, keeps claiming a CRC file failure after (and yes this is with the SATA in IDE mode and with an XPSP2 disk)
    I decided that I really DONT want to goback to Vista, so installed Windows XP64. Now the initial Instal goes very easy, I have the basic setup, the chipset, graphics, network, processor, usb, pretty much the basic... except... and this is where I have lost most of my hair.... SOUND!
    Firstly attempting to install the sound driver results in Failure, claiming the mmdriver.inf cannot be found or corrupt, obviously I checked, and yes there it is, for the sake of it downloaded the MMDRIVER.INF and placed it system32, and still the install fails.
    I have also tried a "Manual Install", from the .inf files... this includes the XP32/64 drivers and the Vista 32/64 bit drivers, still the same
    problem, driver continues to fail install. I am becoming increasingly bald. Outstanding Drivers that WONT install
    *-Audio Device on High Defninition Audio Bus*
    *-Mass Storage Controller*
    *-Modem Device on High Defninition Audio Bus*
    *-USB Device*
    If the following is any help, (Sandra 2008)
    *-Disk Controller*
    (AMD(ATI) SB700 SATA Controller [IDE Mode])
    *-Disk Controller*
    (Toshiba SB700 IDE)
    *-Audio Device*
    (Toshiba IXP High Definition Audio Controller)
    *-Audio Codec*
    (Conexant Systems 5051h)
    *-Audio Device*
    (AMD (ATI) RV635 Audio device [Radeon HD 3600 Series]
    Now, as I write this I have heard rumor that the A305D uses the same
    audio/graphics drivers.... well.... off to try something I guess...
    if there is any help or ideas I would appreciate it.

    Thanks Jaba
    Initially I attempted to locate the MS patches you mentioned, KB835221 and KB888111 respectively, alas there were none available that I could find for XP64, also at the time of tapping this message theres no XPSP3 for XP64 bit either.
    Lucky for me I logged into my MSDN account and downloaded XP+XPSP3 tore the house up looking for a CDR... anyway long story short.... solved all the problems with the required updates of SP3, I now have my Toshiba A300D-15B all singing 'n dancing laptop setup completely with XP32.
    Had to take a hit on the RAM though, gonnna have to go on with only 3.2GB instead of 4GB,
    arguably when one counts the memory foot-print that vista ultimate 64 had used I am probalby still on a winner here in memory avaiable terms LOL!
    thanks again! much help!

  • Cannot install the XP Modem driver for Satellite Pro A200

    I'm a local network admin for Newbold College. We have new A200 laptops and we need XP Pro on some of them. I have tried to install the modem driver as one of the last drivers downloaded from the european support site. I also tried to Canadian site as well.
    The driver install program doesn't seem to do anything. I tried to manually install the driver from one of Windows modem Agse/Toshiba software modem, but I have com port issues and I can't quire the modem.
    Can anyone help me please!!!!!!!

    Hi
    What to say; I have checked the Toshiba Europe driver page and found all necessary and important XP drivers for the Satellite Pro A200.
    Please note that the Toshiba European driver page provides XP drivers for 3 different Sat Pro A200 series!!! There is PSAE1, PSAE4 and PSAE7 series.
    Please choose the right one!!!!
    Furthermore you will find an installation instruction txt file on the Tosh page.
    In this file you will find a right and important installation driver order!!! Please follow these steps!!!
    I dont know exactly why you get the modem com port problems but I assume that a new XP and driver installation should solve this strange issue.
    Good luck

  • Need help installing Intel Lan Driver on a Satellite A100-011

    I have bought Toshiba Satellite A100-011 notebook with Windows Vista. Now I downgraded the os to Windows XP. The problem is how to install Intel Lan Driver. I would really appreciate any help, because there is no .exe file and I have no idea, what to do with those files.

    Hi buddy,
    the files which are in the zip file are really the drivers but you have to install them manually which means you must go to the device manager, search for the LAN device which probably should have a exclamation mark and then right-click on it. After clicking a wizard should appear which leads you trough the installation process. When the wizard asks for drivers (if not already automatically found) then point on the folder where the driver files are located.
    Then everything should be fine. :)
    Greetings

  • Satellite Pro L500 - Can't install Realtek LAN driver

    Hi All,
    I have recovered a Satellite Pro L500 Windows 7 pro with disc created from notebook, but now can't install a Realtek LAN driver for the notebook.
    The software driver installer dosn't seem to run correctly all the time, have tried several times to install, with only once a realtek "repair" option becoming available.
    When I did manage to install driver I got a error "device failed to start". after recovery I also had problems with a "PCL simple communications controller driver",
    which seems to have been a Intel MEI according to the VEN, DEV info displayed in systems info.
    Are these problems related and how do I Install the required driver in a automated system if the system won't detect the hardware correctly?

    Have downloaded from many sources the correct driver, but the motherboard or the OS is not discovering the network adaptor so even if the driver is installed the divice is not recognised as being there(physically installed). when installing the driver software i get the error from the realtek installer "Realtek network controller was not found. If in deep sleep mode is enabled please plug the cable". have no idea what or how deep slee is enabled and have reset bios settings to default and have reset cmos.

  • My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

    my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

    Hi there croadstar,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W. 

  • Hi, i updated my OS to mavericks but i cannot install the software, it says my S.M.A.R.T. drive has errors, what do i do?

    hi, i updated my OS to mavericks but i cannot install the software, it says my S.M.A.R.T. drive has errors, what do i do?

    Hi
    Try to delete all content (format by clean install), then you can install Mavericks, however I think its better to add mavericks into External fladh drive (USB)
    to do clean install"
    the language in the screenshot is Swedish which is same in English "Radera= delete), make sure you do back up first for you photos, music, documents,,,,,etc.

  • This morning my PB G4 would not get to the password screen after power on.  I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

    this morning my PB G4 would not get to the password screen after power on.  I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
    Did my HD just crash and unrecoverable?  Time to replace my notebook?

    I believe your hard drive has failed. Hope you have a backup.
    Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
    Listed by drive manufacturer.  Click on the > next to the drive & you will hear the typical failure sound.
    How to Tell When Your Hard Drive is Going to Fail
    http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
    Grinding And Clicking – Symptoms Of A Failing Hard Drive
    http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
    Failing Hard Drives
    http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
     Cheers, Tom

Maybe you are looking for

  • Portal will not load in web browser

    Hello, I have a clustered portal and the second portal (<b>Ep6 SP2 Patch 29</b>) server in the cluster will not load in a web browser.  The portal appears to start correctly and joins the cluster with the other server but when you try to access it in

  • Both LR and PS CC will not re-open after receiving the "Quit Unexpectedly" notice, and files have moved/gone a-missing since this happened!

    I have Lightroom 5 (CC) on a Mac OSX Yosemite. Today when I went to continue working on a large folder of images in LR I noticed that in the corner a few stated that LR couldn't locate the flies (I have never moved or renamed any). So I went to look

  • Creating a button through a class... H E L P

    Can any on ehelp me... I need to make a class, so that i in my JSP-file can create multiple buttons with different names.. Something like this: package form; import java.awt.*; import java.applet.*; public class knap1 extends Applet      public knap1

  • Trigger Firing in Form6i

    Hi all ill explain detail my situation In my forms my menu contain icons like new(+),save,e.t.c. when I click on new(+) icon one additional record comes for inserting But i don't want it. I tried to know the trigger fired for adding record to disabli

  • Restoring new DB to SMB3 Scale Out Server Disk takes forever to initialize

    We have a SQL Server 2014 DB installed on a VM running 2012 R2 Standard with Datacenter 2012 R2 as the host. We have a Scale Out File Server (SOFS) running 2012 R2 on two nodes clustered (CSV).  The entire network is 10GB.  SQL server is configured t