Satellite P100: Can I connect two external monitor to VGA & DVI port at the same time?

The Satellite P100 comes with two external monitor port. A VGA and a DVI. Can you have have two external monitor working at the same time? Can you have two external monitor as well as your internal display working at the same time (for a total of 3 display at the same time?
Here is what I have confirm:
Internal display + DVI connector display
OR
Internal display + VGA connector display
Is it possible to have:
DVI connector display + VGA connector display?
OR
DVI connector display + VGA connector display + Internal display?

As far as I know this is not possible and you can use either DVI or VGA port.
For signal output can be used only one port for external display.

Similar Messages

I want to connect two pair for earphones to my IPAD at the same time is there a recommended splitter or amplifier I should use?

I want to connect two pair for earphones to my IPAD at the
same time is there a recommended splitter or amplifier I should use?

tracer took the words out of my mouth. Doing the search I found this one amongst many others.
http://store.apple.com/us/product/HA828ZM/A/belkin-audio-splitter-35mm-m2x35mm-f

Can't connect and use 2 Store.E Canvio HDDs at the same time

Hi there,
I have 2 Store.e Canvio devices: 2TB and 3TB respectively but, it looks like I can't connect/use them at the same time, as if I do, one of them (the lastest I have connected), becomes inaccessible ("denied access").
If I disconnect the first device I connected, the second one, starts working,,,
Is a weird issue,and I can't find anyone experiencing something similar...
Any idea how could it be causing this, and/or how could I solve it?
Thanks

Im wondering if the same problem appears using another computer or additional USB hub with an additional power supply.
From my point of few this issue could be related to low power provided by single USB port.
Both HDDs seem to support the USB 3.0 standard.
The common USB 2.0 port provides 500mA and USB 3.0 requires 900mA
So this means that two USB devices connected simultaneously would use 1800mA which might be too much for the notebooks USB ports

Can't connect to Internet and 192.168.1 network at the same time

I have been having an issue with my MacBook's networking for the past 4 months. Here are the specifics:
*My MacBook is connected to the Internet via a linux router, with an address in the 192.168.1.x address space. DNS server is an openDns server, 208.67.222.222
*My MacBook is assigned an IP Address manually in the 192.168.1.x namespace
*I have a printer manually assigned an address in the 192.168.1.x namespace
Problem:
* I can only connect to my printer if I leave my DNS server entry blank under my Airport TCP/IP configuration
* I can only connect to the Internet when my DNS server entry to set to the openDNS server entry.
Question:
Is there any way I can connect to both my local network printer and the Internet at the same time? I have set up two locations that I can switch between, but I would prefer to be able to access both networks at once.

I tried turning AppleTalk on, but no luck.
It seems that the problem is related to basic TCP/IP connectivity. For example, when my DNS server is set to blank, I get a fine response from the command "ping 192.168.1.253". However, when my DNS is set to one of the openDNS servers, I get this error:
PING 192.168.1.253 (192.168.1.253): 56 data bytes
ping: sendto: No route to host
ping: sendto: Host is down

With MacBooks Retina 13" can you connect two external monitors with resolution each 2560x1600?

I'm not talking about Thunderbolt displays, but other brands like ASUS, LG, SAMSUNG, etc.
Has anyone tested?

You can connect two displays to the two Thunderbolt ports with appropriate Mini DisplayPort cables or adapters.
<http://www.apple.com/macbook-pro/specs-retina/>
"Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays"
If the display supports HDMI, you could connect one to the computer's HDMI port, but not at 60Hz.
"Support for 3840-by-2160 resolution at 30Hz"

Can't connect more than one PC to my network at the same time.

When trying to connect a second wireless laptop to my network, the one already connected gets disconnected. I'm using a WRT110 router(cable connection) that I bought 5 days ago, and two laptops with Win Vista. I don't have any PC wired connected.

First thing which you need to do is upgrade the firmware of your Router. Go to website linksysbycisco.com/downloads... ......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router... here are some wireless settings which you can set on your Router and i think this might make your both the wireless computers go Online...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

How can I have two different windows up on one screen at the same time?

How can I have to different windows open on my screen at one time? Kind of like a split or shared screen.

If you want this split screen thingy for a single app, do like captfred suggests or see if the app itself supports some sort of splitting, like MS Excel.
If you want to do this system-wide, maybe you can get what you want by activating and using Spaces: http://support.apple.com/kb/PH4313

Connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once

I am trying to connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once. Windows recognize both monitors as well. But it dowsn't let me use all three monitors at once(see the below image). In the dropdown, it lists all three monitors. Problem is there are two active displays I can select.

Mavec wrote:
I would like to add a third monitor.
The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently. If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
Cheers,
Bill
I don't work for Lenovo

How to connect two external monitors to a Mac Book Pro?

How to connect two external monitors to a Mac Book Pro?

Not as is, but Matrox makes a peripheral that enables connecting more than one external monitor - matrox.com.

HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
www.drbott.com

Twist: Can't make two external monitors work

I'm trying to get two external monitors to work with my twist. One is connected via mini-HDMI, the other using a Thunderbolt adapter (I've tried adapters for VGA, DVI and HDMI - same result). Only one external monitor (mini HMDI) works, although Win8 detects both (lists the grayed-out monitor make/model correctly). If I unplug either monitor, the other works fine.
Note that I am using an Apple Thunderbolt adapter, not the Lenovo Mini DisplayPort adapter. I use the Thunderbolt adapter with one monitor all the time.
I have two monitors working at another location; Mini DisplayPort -> VGA and USB -> SVGA.
Is the problem that I'm not using the Lenovo adapter, or is this never going to work? Thanks.

The Twist should support internal LCD + one external LCD (or 2 external LCD with displayport splitter) on at the same time.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Can I connect TWO external firewire drives?

Hi - i have a G5 Powermac 2.3 DP
I have a Lacie External Hard Drive connected already to the firewire 800 port, but I want to know if I can have another connected to the Firewire 400 port at the same time (and actually transfer data betweeen the 2 external drives).
ie. are the firewire 800 and 400 ports independent?
Thx

No problem on connecting a second and even a third FW drive. I have 1 FW drive connected to the FW 800 port and two others daisy chained to the FW 400 port in the rear of my G5, still leaving the port on the front open. They all work fine and I can easily copy files from one to another. Only two issues: some people claim that if you have a FW 400 device and a FW 800 device connected, then everything works at 400 speed. I don't know if that is true and may some other poster will confirm. The only other "problem" is that my Canon Optura Camcorder will not interface via FW if anyother FW device is connected. Apparently this is true for Canon cameras and maybe some other cameras as well. But HD drives are not a problem.

Re: if weblogic can serve two ports at the same time?

That's not true. WebLogic supports a non-secure and secure listener port at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then the answer is
yes.
If, you mean two different ports on the same IP address, then the answer is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:8fdk99$t9$[email protected]..
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same time.
thank you in advance.
<URGENT QUESTION>

Well, the question was really meant to see if any change was made to WL to support
this, not because I didn't believe Michael Girdley.
P.S., this is something Websphere 4.0 let's you do...In case this encourages someone
to add this support.
"Mike Reiche" <[email protected]> wrote:
>
If you don't believe Michael Girdley, then I don't know why you would
believe anyone
else. I believe the answer is still 'no'.
Why do they 'have to be on different ports'? We block requests by URI
- so just
block all requests to /youradminapp/* at the firewall. Or you can block
them at
your Web Server. Or restrict them by user in WL.
Mike
you"Anil Arora" <[email protected]> wrote:
Is it still true that WL 6.0 cannot host multiple (non-secure) HTTPports
on one
server? We need this capability within one JVM to allow one web application
to
be accessed from one port while another through a second port. Forexample,
we
have a application to be exposed through the firewall at port 7001.
Then we have
another admin application to only be accessed within the firewall. But
they need
to be deployed within the same JVM since they may have shared statebetween
them.
Thanks,
Anil
"Michael Girdley" <[email protected]> wrote:
I'm sorry, to clarify my statement: I was speaking about nonsecure
communications. Weblogic can only support one listener port at a time.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
Allen Akers <[email protected]> wrote in message
news:[email protected]...
That's not true. WebLogic supports a non-secure and secure listenerport
at the
same time. That was one of the selling points for my organization.
Michael Girdley wrote:
If, you mean the same port on two different IP addresses, then
the
answer is
yes.
If, you mean two different ports on the same IP address, then theanswer
is
no.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
fxy <[email protected]> wrote in message
news:[email protected]...
<URGENT QUESTION>
I'd like to know if weblogic can support two ports at the same
time.
thank you in advance.
<URGENT QUESTION>

Can two different local ips use the same port at the same time?

Can two PS3s use the same ports at the same time. So let's say you have two PS3s and they need to open the exact same set of ports at the same time to be able to play the same game online. Is that possible on a regular consumer router such as the wrt310n? If so, then how would someone go about that. I am just asking out of curiosity.
I don't work for Cisco. I'm just here to help.

Use port range Triggering instead of Port forwarding. When you use port triggering then those ports will be opened for the entire local network.

Can I set up wireless internet and a wireless printer at the same time?

I have an AirPort Express configured already which allows wireless access to the internet (as it is connected to my broadband router) but can I also configure it to allow wireless printer sharing at the same time?
I would appreciate an answer on this as I have been unable to determine it so far.
Many thanks

The Express has a single Ethernet port, whereas, the Extreme has four would be one of most distinguishing feature differences. Obviously size differences would be #1. (ref: Identifying AirPort Hardware)
When connected directly another router, you have (effectively) two routers in series. In this configuration, the AirPort Express would need to be reconfigured as a bridge. This will allow the broadband router to provide both NAT & DHCP services for all the wired/wireless clients connected to either router.

Satellite P100: Can I connect two external monitor to VGA & DVI port at the same time?

Similar Messages

Maybe you are looking for