Satellite P100 - Cannot delete the data from CD-RW disks
I have a Toshiba Satellite P100 laptop.
According to the User Manual it says:
You cannot partially delete any data written to a CD-RW
I thought the whole idea of using a CD-RW was so you could delete whatever you wanted to and use that part of the disc again and again.
Can someone explain?
I didnt find this info in user manual and if you have burned some data on the CD-RW disks then it should be possible to format such CD-RW using an 3rd party tool like Nero Burning ROM for example.
I did it many times using Nero and was always successful
Similar Messages
-
Error while deleting the data from DSO
Hi Experts
I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
" An entry was to be entered into the table
"\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key. "
I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
Regards,
MaheshHi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani..... -
Not able to Delete the data from Memory card
Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery.... -
I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.
Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).
-
How to delete the data from partition table
Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right. -
While deleting the data from cube..getting the following erros...
while deleting the data from cube the below error occured in develoment..any help
i have 4 requets.....2 are deltedd but no records for those...
2 are not deleted and they have some data..
please give me u r inputts pelase
Performing check and potential update for status control table
Message no. RSM1490
Diagnosis
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
System Response Procedure Procedure for System AdministrationHi,
Did you tried by right click on cube and delete data? are those requests are compressed or roll up? -
How to delete the data from KNVP without using the delete statement
Hello friends,
I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
Can you please tell me the name of the standard program or BAPI to delete the data .
Thanks in Advance
KuldeepHello Raymond,
I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
=============================================================
REPORT ZK_TEST2 .
data :
I_KNA1 LIKE KNA1,
I_KNB1 LIKE KNB1,
I_KNVV LIKE KNVV,
I_YKNA1 LIKE KNA1,
I_YKNB1 LIKE KNB1.
Data :
T_XKNAS LIKE FKNAS occurs 0,
T_XKNB5 LIKE FKNB5 occurs 0,
T_XKNBK LIKE FKNBK occurs 0,
T_XKNVA LIKE FKNVA occurs 0,
T_XKNVD LIKE FKNVD occurs 0,
T_XKNVI LIKE FKNVI occurs 0,
T_XKNVK LIKE FKNVK occurs 0,
T_XKNVL LIKE FKNVL occurs 0,
T_XKNVP LIKE FKNVP occurs 0 with header line,
T_XKNVS LIKE FKNVS occurs 0,
T_XKNEX LIKE FKNEX occurs 0,
T_XKNZA LIKE FKNZA occurs 0,
T_YKNAS LIKE FKNAS occurs 0,
T_YKNB5 LIKE FKNB5 occurs 0,
T_YKNBK LIKE FKNBK occurs 0,
T_YKNVA LIKE FKNVA occurs 0,
T_YKNVD LIKE FKNVD occurs 0,
T_YKNVI LIKE FKNVI occurs 0,
T_YKNVK LIKE FKNVK occurs 0,
T_YKNVL LIKE FKNVL occurs 0,
T_YKNVP LIKE FKNVP occurs 0 with header line,
T_YKNVS LIKE FKNVS occurs 0,
T_YKNEX LIKE FKNEX occurs 0,
T_YKNZA LIKE FKNZA occurs 0.
T_XKNVP-KUNNR = '7000002648' .
*T_XKNVP-VKORG = '0001' .
*T_XKNVP-VTWEG = '01' .
*T_XKNVP-SPART = '01' .
T_XKNVP-KZ = 'D' .
append T_XKNVP to T_XKNVP.
CALL FUNCTION 'CUSTOMER_UPDATE'
EXPORTING
I_KNA1 = I_KNA1
I_KNB1 = I_KNB1
I_KNVV = I_KNVV
I_YKNA1 = I_YKNA1
I_YKNB1 = I_YKNB1
TABLES
T_XKNAS = T_XKNAS
T_XKNB5 = T_XKNB5
T_XKNBK = T_XKNBK
T_XKNVA = T_XKNVA
T_XKNVD = T_XKNVD
T_XKNVI = T_XKNVI
T_XKNVK = T_XKNVK
T_XKNVL = T_XKNVL
T_XKNVP = T_XKNVP
T_XKNVS = T_XKNVS
T_XKNEX = T_XKNEX
T_XKNZA = T_XKNZA
T_YKNAS = T_YKNAS
T_YKNB5 = T_YKNB5
T_YKNBK = T_YKNBK
T_YKNVA = T_YKNVA
T_YKNVD = T_YKNVD
T_YKNVI = T_YKNVI
T_YKNVK = T_YKNVK
T_YKNVL = T_YKNVL
T_YKNVP = T_YKNVP
T_YKNVS = T_YKNVS
T_YKNEX = T_YKNEX
T_YKNZA = T_YKNZA
============================================================= -
How shall I delete the data from R/3 setup tables
Hi Experts,
How shall I delete the data from R/3 setup tables
Regards
SailekhaHi Sailekha , to delete the set up table in r/3 either u can go to tcode LBWG as already mentioned or u can also delete the same from tcode SBIW
Settings for Application-Specific DataSources (PI) -
Logistics -
Managing Extract Structures -
Initialization -
Delete the Contents of the Setup Tables .
Just click the clock there then u hace toi juct give the application component name like for Inventory 3 , then execute it , it will delete the set up table for inventory ..
Regards.. -
I am trying to delete the data from the info cube.
Hi All,
i am trying to delete the data from the info cube.in cube reporting symbol is availble.when i click on delete button delete symbol is coming again when i click on refresh button request is not deleting .please give me solution .
Thanks,
chanduHi,
Also try to delete in Data Mart Status.
R u deleting particular request or the entire data in cube, if entire data then right click on Cube select Delete Data, it entirely deletes Data.
Hope it helps you...Let us know if you still have any issues.
Reg
Pra -
After building index is crawler deletes the data from crawl db?
HI
how the search service crawl component works,
each time after building index is crawler deletes the data from crawl db
adilHi Adil,
Index Database is usually called Crawl Database.
I found a series of articles which goes through what these components are, how they work together, and how to provision them:
http://blogs.msdn.com/b/russmax/archive/2010/04/16/search-2010-architecture-and-scale-part-1-crawl.aspx
http://blogs.msdn.com/b/russmax/archive/2010/04/23/search-2010-architecture-and-scale-part-2-query.aspx
SharePoint Server 2010 Enterprise Search Evaluation Guide:
https://www.microsoft.com/en-us/download/details.aspx?id=24189
Regards,
Rebecca Tu
TechNet Community Support -
I cannot delete the messages from my mailbox
I cannot delete any messages from my mailboxes. Please help
If you are using the native Apple email app you should be able to swipe to the left and delete. If you can't then remove and reinstall the email account. If that does work
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
Not able to delete the data from ODS
Hi All,
I have ODS which is having some requests . All the requests are being loaded with full update only. When I am trying to delete the requests from ODS, out of 4 requests 2 requests have been deleted but rest of them are not at all deleting .
As I am working in Quality system, So I don't have the access to delete request from Table level like RSODSACTREQ, RSICCONT etc...
Can you give any clue to delete the remaining 2 requests.
Thanks,Hi kavitha,
Does the Request has data mart status.IF yes try to delete the request from the respective DSO's.
and try to delete the request.
are you deleting the Whole data from DSO ? - right click on the DSO and select deleted data from the context menu.
Regards
Prashanth K -
Deleting the data from logical file/unix file
Hi all.
I need to delete the all the data from logical file (application server file/unix file).But I dont want to delete the logical file ( only data in the logical file should be deleted, i.e making file empty)
Thanks in advance.
Cheers.
samiHi Sami,
Refer thsi document https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4d7aeb7d-0c01-0010-fa8a-a4a8e8968a93.
Regards,
Flavya -
Will upgrading to windows 10 delete the data from all drives
A notification for upgrade to windows 10 is available for my mentioned notebook. I've never upgraded to a newer version of windows earlier so i wanna be sure if the upgradation would delete all the data from each drive(i.e. windows drive"c" along with D,E and F)) and what is the total amount of NET-DATA(in MB) will be used for Upgrading online..so that i might not run out of data balance during upgradation process. One more thing..currently the windows 10 logo has arrived at the bottom right of my task bar. Do REPLY asap!!!
Always back up your data when upgrading! It will only if you tell it to during setup. I would not upgrade untill you have backed up important data manually (copy>paste) to another external hard drive.
-
HT203200 Cannot delete the file from the itunes folder
I cannont delete the file from the itunes folder because it tells me I need permission to do so. I am the admin person for the laptop plus I have checked my permissions under the security tab in the files properties. How do I delete this file to start again? It downloaded 1.2GB of the file before the error message appeared, so its paid for and all but not looking like I'll get to watch it before the time runs out on the movie being available for me to watch. :-(
Try deleting the file without iTunes running.
When you next open iTunes it should then be marked as a missing file and you should be able to delete the entry from iTunes.
Hope this works
Regards,
Colin R.
Maybe you are looking for
-
Interval Since Last Panic Report: 30536 sec Panics Since Last Report: 1 Anonymous UUID: 607D9979-1C74-04D7-EA6E-CCF8837A6E71 Tue Jan 14 22:09:18 2014 panic(cpu 2 caller 0xffffff7f9ba88f1a): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0
-
Whats the best way to get an averaged measuremen​ts while scanning?
I currently have a PXI 4071 DMM and a PXI 2575 Mux. I've played around with the examples of how to do scanning of channels which all works out fine. However the scanning only takes one measurement every time it steps down the scan list. What I need i
-
Iphone 5 low battery settings with wifi
Are there any special Iphone 5 low battery settings with wifi? Today I was using my iphone and the wifi magically turned off by itself. I figured it was just having trouble finding the wifi so I went to my settings to see what was going on. Someho
-
Ensure mail can be sent out properly
Hi, I am to ensure that the current server running Exchange 2010, would be working fine with the domain to send out mails. But where to choose Edge Transport below? Many Thanks & Best Regards, Hua Min
-
I'm using APEX 3.2 on Windows. As per the read me I don't have to set the CLASSPATH for windows so I am attempting the following. C:\app\oracle\product\11.1.0\db_1\apex\utilities>java oracle.apex.APEXExport -db blah:1522:blah -user blah -password bla