Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

Hi everyone.
At the beginning I'm sorry for my bad english so I will say shortly.
A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
I can't speak with friends on skype ;( Help me. I hope you know what I say.

Hello
Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

Similar Messages

  • Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

    Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
    Can anyone help me?
    thank you

    Hi Largo09,
    Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
    As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
    In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

  • Satellite P300 - Microphone doesn't work after Windows 7 installation

    Hi,
    I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
    I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
    Thanks
    James

    Hi
    Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    After this it should be possible to use the internal microphone.
    By the way: Which application you use for the internal microphone? Skype or something else?

  • U405 s2833 Microphone doesn't work after Windows 7 Upgrade

    Hi all,
    I had done the WIndows 7 Upgrade for my U405 S2833, everything is working fine but the microphone doesn't the drivers are installed and it appears at the device manager, msn, skype and some other IM programs but it just doesn't work, I had downloaded all drivers till date, but nothing seems to work, any idea?
    Regards

    Satellite L305-S5970
    You may want to experiment with these drivers. The most recent is not necessarily the best fit.
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
       Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5859 - Released 07/13/09)
       Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5789 - Released 06/25/09)
    -Jerry

  • Microphone doesn't work after Windows clean install

    I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
    I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
    I have tried the Toshiba Software Installer but it didnt help
    I have tried both drivers on toshiba's website for Realtek but it still doesnt work
    driver_audio_realtek_TC40053600B.exe
    driver_audio_realtek_TC40064600A.exe
    Anything else I can try. Please help
    Thank you.

    Satellite A135-S4677
    After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
    1st Hardware Drivers & Hardware Utilities
    1) Chipset related
    2) Display
    3) Sound
    4) All other hardware drivers & hardware utilities
    2nd Toshiba Utilities & Toshiba Software
    1) Toshiba Value Added Package (TVAP)
    2) Toshiba Flash Card Utility (sometimes included in the TVAP)
    3) All other Toshiba utilities and Toshiba software
    Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
    So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
    Intel Chipset SW Installation Utility for Windows 7 (32/64)
    Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
    Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
    Please let us know what happens. Good luck.
    Mike

  • Satellite Pro L550 - WLAN doesn't work after new Installation Win 7/64 Pro

    Hi,
    I installed a real Win 7 / 64 professional full version on my Sat Pro L550-199, PSLW9E. Now I can't switch on my WLAN. The big FN-bottons doesn't exist. I tried lots of driver I found on the Toshiba Support page.
    Whitch is the right, or is Win 7 / 64 professional not supported with WLAN?
    How I can switch on WLAN without the FN-Key?
    Lenny

    Hi Lenny-27-7,
    Is your WLAN card installed properly in device manager? It must be listed under network devices without yellow exclamation marks. So you can make sure that WLAN card is installed.
    For all FN keys you have to install Value Added Package and Flash Cards Support Utility. Both tools can be downloaded on official Toshiba page where you can find the WLAN driver too:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    If you have installed everything you can start with WLAN configuration :)

  • Imessage doesn't work after the installation of the update 6.0

    imessage doesn't work after the installation of the update 6.0

    iMessage will not work until it's activated.
    Switch iMessage OFF. Double tap Home button and delete Messages in multitask-bar.
    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.
    Switch iMessage back ON.

  • IMessage doesn't work after the installation of the update 5.1

    iMessage doesn't work after the installation of the update 5.1

    I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
    I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
    I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
    Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
    Thanks
    Jo

  • Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

    My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

    Hi
    The webcam is listed in device manager under the Imaging devices
    There you should see USB Video Device.
    If its not listed there, then I think that the device malfunctions or its disconnected.
    The webcam is an usb device and its connected to USB controller.
    I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
    I such case the display lid needs to be disassembled and the cables should be checked.
    In my opinion its a job for an technician.

  • Satellite P200 - Microphone has stopped working after Windows 7 install

    My Satellite P200 came with Vista Ultimate, the mic worked for a few months suddenly it stopped. I decided to install Windows 7, but mic still does not work.
    Any ideas anyone?
    I use this laptop to skpe my folks a lot. I can use an external mic fine, but really want my inbuilt one working again.

    Hi buddy,
    Sounds like its something wrong with your Windows 7 installation if the microphone doesnt work anymore...
    I would recommend updating the webcam driver because the microphone is a part of it. You can find driver updates here:
    http://eu.computers.toshiba-europe.com
    I dont know what Satellite P200 you have exactly but if you cant find a Windows 7 driver for webcam, choose another model that is fully Windows 7 supported, e. g. Satellite P300.

  • Internal Microphone doesn't work (after installing Boot Camp 3.1)

    I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
    I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
    On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
    I note that ear plug (connector in the back of the iMac) doesn't work too.
    Somebody can help me in this case ?
    Regards
    JGFilho

    i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
    The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

  • My microphone doesn't work after installing lion on iMac early 2009

    Hello,
    I've just installed LION and everthing seems to be OK except the microphone, it doesn't work on skype, imovie.
    I have an Imac early 2009.
    Will this bug be fixed in the next 10.7.1?
    Please if you can help me,
    Thanks

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • Safari doesn't work after new Installation of Lion

    Hello,
    I installed a new SSD into my MBP mid 2009 and put the HDD into the optibay instead of the Superdrive, after that I installed OSX Lion onto the SSD and used the Migration Assisstent to migrate my old User Folder from the HDD with the newly installed OSX Lion. After the migration, everything went well, except of the following:
    -Safari doesn't work, no website can be loaded, as soon as I run Safari, there is a process running named "Webprocess" which uses 95% of the CPU and makes the MBP heating.
    -VLC Media Player does not work as well
    Any idea anyone?
    thx
    Mohammad

    Another problem is:
    When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
    (The Icon of the VLC Media Player  only jumps up and down in the dock, and nothing else happens)

  • Adobe Reader doesn't work after windows 7 update

    Hello,
    My Adobe Reader X was working fine, until one night where Windows 7 automatically updated, and after that Adobe Reader doesn't work anymore. It doesn't respond AT ALL when I click on it, and I cannot view PDF files anymore.
    I uninstalled it, and re-installed it --- still doesn't work. I tried downloading version 9, but still it doesn't work.
    I also tried to do system restore, but somehow it won't let me --- it says it failed to do so.
    When I try to open PDF files in IE 10, it says "There is a problem with Adobe Acrobat/Reader..." and an error code of 103:103.
    Could anyone help me?
    Thanks!

    You can try running cleaner on your machine
    http://labs.adobe.com/downloads/acrobatcleaner.html
    and then again install latest Reader from
    http://get.adobe.com/reader/enterprise/

  • CS4 doesn't work after LION installation

    After the Lion installation i had several problems.
    One of these is that the cs4 doesn't work.
    i open illustrator or photoshop and they crash every time. "photoshop not responding" "illustrator not responding" and so on..
    I had to reinstall all the suite that now works.
    The question is... why??
    I thought is is better to format the mac... should i do ?
    thanks

    Another problem is:
    When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
    (The Icon of the VLC Media Player  only jumps up and down in the dock, and nothing else happens)

Maybe you are looking for