Satellite Pro L40 - Sound Driver after Windows XP SP3 Install

Hi,
I had bought the Satellite Pro L40 about 6 months ago and the speed of the laptop was too slow with windows Vista. So I decided to install an old copy of windows XP that I had bought earlier. I upgraded the windows installation to SP3 before installing all the drivers.
Now all the drivers have been installed properly except the sound driver. I downloaded the XP version of the driver from the toshiba website but it did not work. So I though maybe the vista version would work, so I downloaded that. But that didn't work either.
Can anyone suggest a solution where I can get the sound driver to work? Preferably without having to get the windows reinstalled again.
Please help me out...!
Thanks

hi there,
Try reinstalling the soundcard driver for XP; Just go here -- > [Realtek Soundcard Driver fo XP|http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]
Hope this helps :)
Message was edited by: iSkO

Similar Messages

  • Satellite Pro L40 wont boot after changing BIOS settings

    Alright changed a few settings in the bios last night and now when I boot I get a black screen lights flash and that hard drive light comes on but nothing on screen.
    There was no password on bios,... how would I reset BIOS to normal?
    I put a windows disk on I can hear the disk spinning but nothing on the screen
    (I think I have come to the right place on the forum)
    Its a Toshiba Satellite Pro L40 model psl4be.
    Thanks

    >There was no password on bios,... how would I reset BIOS to normal?
    You can set the BIOS to default ONLY inside the BIOS so you have to access the BIOS pressing F2 or at the beginning of the booting order
    But I doubt that this problem is related to the BIOS.
    Maybe its just a simple bad luck that this issue happened just exactly after changing something in BIOS.
    Try to connect an external monitor and check if you can see something on 2nd display.

  • Satellite P100-239 - Sound driver for Windows 7

    Hello,
    I need some support for installing audio driver for my Satellite P100-239. I tried different things but noone works. So I'm searching for a mate who give me a solution to fix my sound prob. I am sure it is a conneax hd audio.
    I cant flash bios with BD1_BIOS(V4.80)_Update (is it possible for installing soundcard?)
    THx for any help

    Hi Salomon82,
    I founded a similar thread regarding sound drivers for Windows 7 on Satellite P100:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=191495&#191495
    It seems that the Vista driver also work on Windows 7! :)
    Furthermore its not necessary to update the BIOS for installing sound card drivers because firstly you should try the correct driver.

  • Satellite Pro C650, Boots OK, after Windows starts up the screen goes white

    Hi,
    I have a Satellite Pro C650.
    It boot fine.
    I can see Windows starting up - after startup - the screen goes completely white.
    Has anyone seen this?
    Am geussing it might be a loose display connection - but I the screen displays the startup sequence and initial windows startup.
    Regards,
    eeiddne

    Hi
    I dont think your display is faulty.
    What happens if you access the BIOS at the beginning?
    To access the BIOS press F2 while powering on the unit.
    Access the BIOS and keep it running for some minutes and check if the display will turn to white.
    Additionally its advisable to connect an external monitor and to output the display to the 2nd screen. If the 2nd screen would not be OK, then the graphic chip might be the troublemaker.

  • Satellite Pro P100 - Touchpad driver for Windows 7 32bit

    Hi
    I'm looking for a touchpad driver for my P100 (PSPA4E) which works under Windows 7 32bit. After changing from Windows XP to Windows 7 the tochpad isn't working any longer.
    Thx in advance for your help!
    Regards

    Hello
    Generally speaking for touchpad no additional driver is necassary. The touchpad also works without touchpad driver because the Windows standard driver will be used.
    Touchpad driver is only important for special functions like virtual scrolling, change tapping settings, etc.
    You can download all driver on official Toshiba website:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    But you have to search in driver *Archive* because its old notebook model.
    Its no Windows 7 32bit driver available but I saw touchpad driver for Vista. It should work on Windows 7 too. :)
    Check this!!!

  • Satellite Pro U200 shuts down after 5 mins then starts after a while

    Satellite Pro U200 shuts down after 5 mins then starts after a while. When it shuts down the
    blue screen says - stop: (0x0000008e,0xaa846f58,0xa9f29808,0x00000000)
    sysaudio.sys - adress aa846f58 base at aa843000, datestamp 41107f1a

    Hi
    Believe me; its not easy to say exactly why the BSOD appears.
    Generally it happens because of the serious software malfunction or hardware fault.
    Did you use the OS from the Toshiba image?
    There message says something about sysaudio.sys.
    This file is a system audio WDM filter process and its a part of Windows OS. It controls the hardware like printer or graphic card on a lower level.
    Note: The virus uses such files as a camouflage. You should use always a anti virus application.
    Furthermore you have suggested that the notebook shuts down after 5 min.
    Well, this sounds like a overheating issue. How did you use the notebook? You should know that the free space around the notebook is very important because of the air circulation. The ventilators should be also free.
    I you use the notebook in the right position and this will happen again so I would recommend asking the Toshiba service partner for the help. They should check the notebook.

  • Memory upgrade on Satellite Pro L40-15d

    Hi
    I have Satellite Pro L40-15d with 512 memory (Samsung) but I wont upgrade to 1GB. I have Kingston ktt667d2/1g I have tray to put in to both slots but nothing work I cant switch on computer.
    But when I change for old one laptop is ok. What can I do? Install special program or update BIOS or maybe the memory stick is broken.
    Regards

    Hi
    The notebook doesnt boot after the memory upgrade due to these different issues;
    - memory modules are not compatible together
    - memory modules are not compatible with the notebook
    - memory modules are faulty
    - one of memory slots is faulty
    In most case the memory module replacement helps.
    One hint; did you try to switch the memory modules in the slots? Sometimes this helps.
    Several weeks ago I have updated my memory and the notebook didnt boot.
    I thought its a memory malfunction but after module switching the notebook booted correctly.
    Good luck

  • Satellite Pro 6100 shuts down after 15-30 minutes

    My satellite Pro 6100 cuts out after 15-30 mins operating on mains power. There is a snapping sound and all lights go out except slow flashing amber (power problem). I restore it by removing the power cable and waiting a while.
    It will then boot up again. I have used two different power adaptors and two different battery packs. It also happens if running on mains with no battery in. My suspicion is an overheat cut-out. Does the Sat Pro have one? Might it be clogged with dust inside (it is 5 years old)? If so how do I clean it out. I don't think it is fan failure as I can hear the fan cut in. Advice much appreciated. Thank you.

    Hi there,
    Me and my partner, have the same LapTop, and I've located the problem in connector between PSU board and MainBoard. So, if you've never opened your LapTop, now is the time, but be prepared with tools for SMD soldering. Usually, the connector on MainBoard is the problem. The reason for this is that Toshiba made flaw in design of the housing and admitted that, which resulted with court order for replacing the LapTop with some models from newer line for that time, or paying cash amount ($1.000). I intend to repair my LapTop in a way that I will replace the connectors (both on PSU and Main Board) with thin wires. I know that this is a hell of a job (160 solder points) but what can I do, I love this machine. I am working on Compaq EVO N-610c, but he can only eat the dust from Toshiba.
    Regards,
    Alek
    P.S. If you want to consult me about that matter, feel free to contact me on my e-Mail: [email protected]

  • Can I upgrade the T2310 CPU in Satellite Pro L40-15D series laptop?

    Hi, ( I apologise if this has been asked before but when I search ' Satellite pro l40 series' I found no relevant answers )
    I've been searching around the net & so far found some conflicting answers to this question so hopefully this forum may be able to help.
    I have a Satellite pro L40 15D laptop and I wish to upgrade the Intel Pentium Dual-Core 1.46 Ghz T2310 CPU to a Intel Pentium Dual-Core T4300 2.1GHz 1MB 800 CPU or something similar.
    I have found the following information from http://www.notebookcheck.net/Review-Toshiba-Satellite-L40-14N-Notebook.7294.0.html
    " f you consider a CPU upgrade, there are not many options available. The Intel GL960 express notebook chip set supports only up to 533 Mhz FSB processors. So, most of the up-to-date Core 2 Duo CPUs (with 667MHz) cannot be used. "
    But then I have also read that the GL960 can run processors of 800Mhz?.
    I also asked the question on ebay from the seller of the T2310 CPU & received this answer
    "SHOULD be okay, but your T2310 has 533Mhz FSB and the T4300 has 800Mhz.
    Most modern intel motherboards should easily accept an 800mhz cpu, but I cannot guarantee. Might be an idea to see if you can find out if there are other models of Toshiba L40 that also have 800mhz chips, as that would be a good indicator.
    And if I can not upgrade too a T2310 because of the 800mhz is their a 533mhz cpu that will be compatible & more powerful for audio production than my current 1.46 Ghz T2310 CPU.
    I have only had this PC 4 years from new,it would seem to me to be not very resource friendly if this laptop has not be designed to handle upgrades.
    Thanks for any guidance.
    Message was edited by: ib1

    To quote
    'Problem is that CPU upgrade is not supported and all you do is on your own risk.
    Check also http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm"
    Helpful link thanks :-)
    Of course any upgrade I did personally would be entirely at my own risk .
    So it's not a good idea as mentioned .
    I would still like to know if technically it is possible and if so it's most probably been done & maybe works fine, rather then half answers .
    Message was edited by: ib1
    Alternatively do you guys have any suggestions, other than buying a new laptop, of ways to increase the performance for music production.
    I already have 1.99 GB of ram installed .
    Would using a external USB sound card and bypassing the internal sound card give me a little more processing power . I believe it's the real time processing of audio effects etc that make audio production demanding on a cpu.Could that processing somehow be shared with a pro audio card? .
    Either way thanks for the help guys :-)
    Message was edited by: ib1

  • Satellite C55-A5182 - Screen flickering after windows 10 upgrade.

    Satellite C55-A5182: screen flickers after windows 10 upgrade....help!!!

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works.  Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use.  Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10.  Please follow the provided troubleshooting steps and re-post with the results.  Have a great day!

  • Satellite Pro L40 wont start

    When i turn on my Satellite Pro L40 it shows me a screen asking me to start windows repair or start windows normally.
    When choosing either option it leads me back to the same screen.
    Does anybody have any ideas?
    Many thanks

    Hi Will
    For me it looks like the installed OS was muddled up for non apparent reason
    If you are not able to boot in the Windows XP OS and if the repair option doesnt help to boot in the safe mode I dont see any other possibility as to boot from the Toshiba recovery CD and to reinstall the operating system again!
    But note; the booting from the recovery CD will format the whole HDD and you will lose all files stored on the HDD. ?
    This is a drastic procedure but in my eyes its the only one which could helps to solve this issue.
    Greets

  • BIOS update issue on Satellite Pro L40-15A - Old BIOS can't recognise EEPROM

    Hi
    I'm having trouble flashing my bios.
    I have a Satellite Pro L40-15A.
    The Toshiba winflash tool that comes with the bios file tells me that the 'Old BIOS can't recognise EEPROM'
    I was recommended to use AFUDOS on another forum but that tells me the bios has an invalid boot block.
    AMI flas for dos tells me the flash rom is write-protected??? There is no option in bios to disable it and I don't think anyone would be dumb enough to put a hardware Bios protect jumper on a laptop.
    Please help
    Thx

    Hi and thanks for reply
    The 5.10 bios update is only for XP laptops, my one came with windows vista installed so I need v2.20
    "old BIOS cannot recognise EEPROM" is the error message i get when i try to flash the bios with the supplied software from Toshiba
    _+UPDATE:+_
    New verion of BIOS update has worked!!
    Case could be closed

  • Satellite Pro L40 - What is a average battery runtime?

    Hi there,
    I just recently received my Satellite Pro L40 and am just wondering what the average battery runtime is? Once fully charged it only seems to be able to handle 1hour max. Is this normal?
    The laptop I had before was the same, but my friends laptop, which is more than a year older than mine, runs for more than 3 hours on a fully charged battery.
    Is there a fault??
    Thanks

    Hi
    It is not easy to answer this question because the battery working time depends from the notebook usage. You should know that you will be able to run the notebook much longer on battery power using only some common applications like Word or Internet Explorer.
    Playing games, watching DVDs or burning the CD/DVD waste more battery power because the performance of the single devices is much higher!!!!
    Fact is that the Pro L40 notebook was equipped with high-tech parts and devices. The notebook supports a strong Intel Pentium Dual-Core CPU, huge HDD, nice GPU and and and
    Furthermore you should know that the preinstalled Vista OS eats many resources and waste more battery power as the Win XP!!!
    All this factors has a influence on the battery working time.
    Last but not least you should know that there are different batteries on the market.
    If you want to increase the battery performance buy a stronger battery!!!
    regads

  • Satellite Pro L40: black screen but faint image in the background

    Satellite Pro L40-17H (PSL4BE-00T005EN)
    Hello,
    I would appreciate some help with the following problem:
    SYMPTOMS: Screen is black, but I can see that there is a faint image in the background.
    I get a good image in external monitor.
    I suspect, _among others_, that there may be a faulty *lid sensor/switch*, but I have been unable to locate it, although I have disassembled the unit.
    If somebody knows, please let me have the exact *location* where I should look for the switch.
    Thank you

    Thank you RandyRoberts
    You are probably right, it is likely that the inverter is faulty, or it might be a bad lamp.
    Nevertheless, I cannot exclude the possibility that there is a bad or stuck lid switch. That is why I insist to check that one out as well.
    I would still like to know where the lid switch is located on the L40.
    Thanks and regards.

  • Tecra M2 Sound driver for Windows 7

    Where can I find Tecra M2 Sound driver fro Windows Vista or 7
    Thanks

    aliabu
    ...can u email me registry file...
    This is my method of installing a Vista driver into Windows 7. The driver adds the necessary Registry entries.
    Download the Sigmatel driver package R171786. This is the Vista audio driver for the Vostro 1400. It is for both 32 bit and 64 bit operating systems.
    Extract the files (unzip or unpack) but cancel the installation process. Go to the hard drive to
    c:\Dell\Drivers\R171786 (This is the folder that is created when you unpack the download. It contains the driver files.)
    Right click on setup.exe and select Properties. Find the compatibility tab to select Vista.
    aliabu
    my lappy sound is not working
    If your audio is not working and installing the audio driver does not help, see the "No Audio" FAQ.

Maybe you are looking for

  • File not found error (404) from web browser

    I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a different Oracle home. The ifsconfig went thru fine. However I am unable to access the login page ( I executed ifsapachesetup ). I tried to access http://<machine>:<port>/servlet/files.

  • ITune Store can't show purchased item after iOS 7.1.1 Update

    After my iPad Air got restored to factory iOS 7.1 from the Apple Store, I restored my content which is 25GB of books pdf apps and videos.  Then got the news that iOS 7.1.1 is out and fixed some issues, I thought maybe fixed the Videos App problem, so

  • I do I insert a hyperlink in e-mail. Insert feature does not seem to work.

    How do I insert a hyperlink in e-mail? Insert feature does no seem to work. == This happened == Every time Firefox opened == the beginning

  • 161 movement

    Hi All, Doing a returns delivery cycle with 161 movement, here I have posted u2018J1ISu2019, system has given the message that u2018the doc # u2026. Generated, modvat database updatedu2019. But if I go for u2018J1IVu2019 it is not moving to next scre

  • Problem converting WMV movie file to format Adobe After Effects can read...

    Need HELP... Trying to convert a windows WMV movie clip so that Adobe After Effects can read, as the Mac OSX version of After Effects does not like WMV. Any help appreciated. Max