Satellite Pro M10 will not boot again and comes up with the error message

My Toshiba Satellite Pro M10 notebook will not boot again and comes up with the error message "load error" when I push the power button.
The problem arised after installation of "symantec system works" and trying to restart windows XP professional to make the installed program executable.
What can I do to get the notbook restart again?

Hi everyone
If you cannot acces to the boot menu by pressing F8 you can try to recover the the master boot record from Windows Xp professional installation Cd, to do this:
Attention: don't run these commands if you have more than one operating systems running in your laptop.
Boot from Windows Xp installation cd
Choose repair installation from console by pressing "C" key.
A console will open asking you for administrator password, insert the password and press enter.
Run de command: FIXMBR (It will write a new boot record)
Run de command: FIXBOOT (It will write a new boot file)
Restart the laptop and now windows should start without problems.
Regards

Similar Messages

  • I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

    I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
    THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
    Help!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • When i try to download ebooks to my nook it will not let me and comes up with thw error code CE_COPY_NOT_Allowed- not able to copy this book. Please help.

    Has anyone experienced this problem and have come to a solution this never happened on my old computer?

    It sounds as though your PC is infected with fake antivirus software. The detailed cleanup instructions vary depending on which fake AV you have. However, as a first step, try this:
    Download the following on a different PC, copy them to a USB flash drive or CD, and then run them on the infected PC:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/
    Hopefully these will get you back online safely. If not, search for clean-up instructions for the specific malware.

  • I just tried updating ITunes to the new version and it will not completely download and now I get an error message of MSVCR80

    I just tried updating ITunes to the new version and it will not completely download and now I get an error message of MSVCR80. Is there a problem with the new iTunes version?
    Now ITunes won't open.Help!!!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"

    Macbook Pro will not read CD. Comes up with the message "The disk you inserted was not readable by computer"
    Is it a hardware problem or a software problem?
    Any help solving this would be appreciated

    Hello M1ckyD,
    The article linked below details a number of troubleshooting steps that can help resolve issues with your Mac's Optical Drive.
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Cheers,
    Allen

  • Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later.

    Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network.  What gives?

    Try disabling your firewall; both on your PC and the external Firewall/Router.

  • TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

    I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
    However...
    I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
    I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
    The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
    Any help please on this would be appreciated!
    Pete

    See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
    tt2

  • My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

    I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
    BTW the ipod is an ipod video not classic if that makes any difference.
    Thanks

  • IPhoto 08 vsn 7.1.5 software issue.  Can't print a photo.  When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh

    Can't print a photo.  When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh.  Uploaded latest update but it still doesn't work.  Was going to try and load the software again but can't find the source as a download. 
    Cheers,
    Papasailor

    YOu need to reinstall iPhoto.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Satellite Pro L300 will not boot after Bios update

    Help please.
    I have just formated a Satellite Pro L300 laptop.
    I used all the updated drivers from Toshiba and all went very well.
    I then updated the bios with the latest version.
    After doing this the laptop will not boot but just keeps scrolling through the start menu and no matter what option I choose it just keeps doing the same thing.
    Any ides welcome

    Hi
    I used the Microsoft installation disk but just keep getting to the same stage until the blue screen appears. I have tried different installation disks and also changed the hard drives as well. I can do everything in bios, change boot device enable or disable devices but that is it. I have tried a few times to instal windows but it just stops at the same point saying windows is stopping instal to protect the system. I fear the bios update has done some permanent damage as I cant get past the dreaded blue screen.Thanks anyway

  • My Ipod dosent recognise my Ipod and comes up with an error message!!!

    hiya i need help with my Ipod nano 2GB please help.
    when i plug my ipod in it very rarely recognises it but when it does it comes up with an error message saying 'Itunes has detected an Ipod to be corrupted. You may need to restore this Ipod before it can be used with Itunes' and when i do try to restore it doesnt work.none of my songs appear so i cant take or put any songs onto my Ipod.
    please can anybody give me some info and help, i would be most appreciated.
    thanks

    Go to your computer's System Tray and try ejecting.  If you can't eject, there is an application that is trying to access your iPod.
    Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
    Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
    Note that this is a good, general process any time you can't access any file.
    In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

  • Satellite Pro 4340DVD will not boot up - pci.sys missing or corrupt

    I bought a Toshiba Laptop Satellite Pro 4340DVD Model # PS434C-3N152, Serial # Y0018185J, off E-Bay.
    The original operating system, Win 98SE has been upgraded to Win XP Pro. No disks came with the laptop.
    The laptop crashed yesterday while I was online and will not boot-up.
    _Error message reads:_
    +The following file is missing or corrupt: System32\DRIVERS\pci.sys.+
    Any suggestions on how to rectify this problem will be deeply appreciated. I would very much like to have a users manual for this unit but haven't been able to find one.
    Thanks!
    Sam

    Turns out that the dirty dawg was Anti-Virus 2009 that caused the problem. Managed to get laptop to boot up in "safe mode," found the dirty dawg, deleted it, and the laptop booted right back up.
    This issue is resolved!
    Sam

  • Satellite Pro A120 will not boot up

    Sorry for bad English!
    My computer will not boot.
    I want to install a BIOS but connecting it to another computer but I dont know how?

    In my opinion its not a faulty BIOS but I think the virus on your notebook caused this issue.
    The error message says everything:
    +Malicious program will access to the read memory+
    +problems on bios+
    If you are not able to boot up the notebook, neither from the Recovery CD, bootable CD (XP, Linux) nor from HDD then its a serious issue and you should definitely contact the ASP in your country.
    If you are a lucky man then the ASP technician would be able to flash the BIOS ROM using a special procedure and the notebook should function again.
    Bye

  • Laptop will not boot, stops at Toshiba screen then an error message. Can't access BIOS

    I receive the following error message:
    For Atheros PCIE Ethernet Controller v2.2.7(11/02/10)
    Check cable connection!
    PXE-M0F: Exiting Intel PXE ROM.
    No bootable device -- insert boot disk and press any key
    Before it first shut down, there was some blue screen with a message I was unable to read in time. I turned it back on and got the above message. I have done some research and it sounds like some kind of hard drive problem. I've checked the hard drive connection and it's fine, the same message appears. I also saw that you can access BIOS(not sure what this is exactly, I've never used it) and then somehow recover, reset or change a boot setting that may have changed by itself. I can't access it though. I have tried F8, I have tried pressing escape as soon as the red Toshiba screen comes on, and also tried holding it and releasing when the tone sounds, then pressing F1 but all I get is a tone and no screen.
    It's about to be finals week and I really need some help getting this fixed...preferrebly without having to by a new hard drive because all kinds of homework, papers and study info is on this computer. I haven't even had it for two years yet. I can attach a picture of the screen if needed but it's just a black screen with the above message.
    Thanks for any help!
    EDIT: Satellite L655-S5150 and Windows 7
    Solved!
    Go to Solution.

    It does sound like a hard drive related issue, be it a virus, or physical failure.  If you have fast boot enabled, you will need to hold down F8 while you power up, as just tapping F8 at the BIOS splash screen will not work.  If you are unable to recover that way, hopefully you created recovery media when you first got the laptop(it would have prompted you in the action center).
    If that was not done, you could always swap in a new hdd to get the system up and running, and get a eSATA to USB cable to get all of your info off your old drive.
    Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
    Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

  • TS3694 My iPhone will not up date.  The update has down loaded by when it says verifying with Apple it comes up with the error message 3014.  I have 52% space left on my computer

    My iPhone will not update.  The update has downloaded but when it says verifying with Apple it comes up with an error 3014. When I checked that error out, it says I need to make space on my hard drive but I have 52% space left.  Any suggestions?

    brad805 just as you messaged me I plugged my phone in one last time to see if it would work now and it has. My advice to others in my position. Try pressing the off and menu buttons at the same time if this doesnt work just leave the phone several hours like I did and go back plug it into your computer again and see if it works. I was patient and left mine plugged it in again and got a result.

Maybe you are looking for

  • How to include dynamically subview define in separate file?

    Hi all, I am new to JSF and I'm currently using the MyFaces implementation, I would like to do something like: <t:dataTable value="#{mgr.rowDataModel}" var="row"> <t:columns value="#{mgr.columnDataModel}" var="column"> // <h:outputText value="#{mgr.f

  • My bookmarks toolbar reverted this morning to an old set of bookmarks. My firefox was also upgraded today.

    Today when I started firefox, I was greeted to a version update screen. I also noticed that my bookmarks toolbar was reset to an old set of bookmarks that I previously used with the foxmarks add on. After I had removed foxmarks, I changed my bookmark

  • Removing the Statistical Price from VA05

    Is there a way that you can remove the statistical pricing from the VA05 report?  I need to have the statistical pricing so I can not remove that from the item category.  However, we use the VA05 report for looking at item level material to still be

  • Migration Assistant won't migrate User Account settings

    I have Mac OS 10.7.5 running on the internal hard drive of my mid-2011 iMac. Because I'm having some issues with it that I suspect is due to old data/settings affecting 10.7.5, I wanted to see if installing Mac OS 10.8 might fix them. I installed 10.

  • JVM and WSAD

    friends i am trying to run a program to test out my project(s) the main class has no compile errors as such but never runs and fails with the following message java.lang.NoClassDefFoundError: com/companyname/testdriver/services/TestClass Exception in