Satellite U500 (PSU9ME) - I'm looking for the Windows 7 display driver

I'm looking for the video card driver U500 PSU9ME. My operating system Windows 7 32Bit
Please help me ..

OFC my INF won't work because it is for nVidia g210m. You need to add Hardware ID of your display adapter, that can be found in Device manager, to the INF and try again, replace my PCI\VEN_10DE&DEV_0A74&SUBSYS_FF401179 with yours, other modifications + new drivers for 310m could be required.
I still don't understand why you installed x86 version of windows when laptop came with x64 with all drivers on it, and all of them can be downloaded from toshiba site.
Install Windows 7 x64 and you won't have these problems. Other option is Windows XP x86 if you NEED 32 bit OS, and I can't see why...

Similar Messages

Looking for the best hard drive digital camcorder!!

I was in the store today and asked a couple sales reps, each giving me their opinions that personally didn't sound like "educated" opinions. I want a hard drive camcorder with 60 GB and that is the "best" meeting that criteria. Should I look at Canon's, Panasonics, JVC, or Sony??? I want it to be super easy to use with ease of DVD creating as well. Battery life should be good also. Vista compatible a must. I would appreciate any "educated" opinions that I can get. Thank you..

1. Open Disk Utility in your Utilities folder.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu one. Set the format type to MS-DOS. Click on the Options button, set the partition scheme to MBR then click on the OK button. Click on the Partition button and wait until the process has completed.
The drive should be usable on both a PC and a Mac.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.

Hi - I am looking for the Adobe Illustrator 2014 1.2 (or .0.2) bugfix update for Mac - and it is not visible in the Adobe Creative Cloud Packager (Mac version). The only update visible is Illustrator CC 2014.1 - which is what introduced the bugs.
The only thing that I can think of that might be causing the issues that I have a Mac Mini on Mavericks.
Dave

Hi
I have discovered that my question above is a non-question. A user triggered by looking at the below article about Illustrator 2014 cc 17.0.2
http://helpx.adobe.com/illustrator/release-note/illustrator-17-0-2-release-notes.html
He had recently upgraded from wht we now know is 18.0 to 18.1 which is the latest version. He read the above artic
le and supposed that it was a bug fix release for his version - because the v17 ov18 number is not often displayed. It is usually just 2014 CC.
I have asked him to post a bug report about Adobe Illustrator CC 2014.1
Dave

I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again.

Problem with my program looking for the settings file in the wrong folder

I have been writing a simple FTP file uploader, what I want to do is be able to select the files I want to upload in windows explorer and then right click and click the menu item and it launches the program and passes the files paths that I have selected to it.
So I use this in the windows registry "C:\Program Files\Java\jre1.6.0_03\bin\java.exe -jar D:\BenFTP\BenFTP.jar %1"
It launches fine and has no problem finding the files I want to upload. The problem is that it tries to look for the settings file in the same folder that the file I am try to upload is in. Which it's not suppose to do since the settings file is in the same folder that the .jar is in.
Edited by: ColNewman on Feb 5, 2008 6:55 PM

So, you're looking for your settings file in your current working directory. There's no way to set the CWD in your registry entry (is there?) so that isn't a practical thing to do. Presumably you're using a File object or a FileReader or something? Can't do that.
One alternative is to look for the settings file in the classpath. You can get a URL to a file in the classpath like this:URL settings = this.getClass().getResource("/settings.xml");Or you can get an InputStream to read the file by using the getResourceAsStream method. You would have to make sure that your executable jar file contained a Class-Path entry that specified the right directory, because the directory the jar is contained in isn't automatically in an executable jar's classpath.
Another alternative is to ask the user where the settings file is supposed to be, and put an entry in the Preferences (java.util.prefs) to remember that location.

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How to look for the Table Name

Hi Friends,
Sometimes we need to download the table for the desired information if the same is not available from a particular report. How to look for the table name? Is there a report or a particular feild, where we can find the name of the particular table?
Thanks for the assistance.
Regards

Hi Friend,
If you want to see the structures then go to SE11. Sometimes it happens that you cannot find the table names but only fields. In such case, if you want to find the Table names which is not available, then go to SE90.
Abap Dictionary > Fields > Table Fields.
Now Enter the Field name in Right Hand Side of the screen then Execute. You will see the all tables by which that Fields are used.
Regards,
Jigar

Where to look for the computed stats collected using gather_table_stats

I have used analyze command before but new to gather_table_stats.
I have executed gather_table_stats procedure as given below. Now where to look for the statistics estimated and also what are the important parameters I need to look in the stats ? Any major difference between analyze & gather_table_stats ?
SQL> exec dbms_stats.gather_table_stats(ownname => 'TPDBS01A', tabname => 'x_TPD_STG_TL_SF_LEGAL_OWN
ER' , estimate_percent => 50, method_opt => 'for all indexed columns size auto');
PL/SQL procedure successfully completed.

The command "analyze table" is deprecated for gathering optimizer statistics. But it is still the only command to get for instance the chained rows. This command is no longer maintained for new features, so if you use this command to collect statistics, it might not collect all needed numbers for the optimizer so the plan could be wrong.
The package dbms_stats is collecting all the figures that the optimizer needs to genererate an optimal access plan. All new database features are incorporated only here.
The statistics numbers can be found in the normal tables like USER|ALL|DBA_TABLES, ...TAB_COLUMNS, ...INDEXES, ...IND_COLUMNS etc. There you can find for instance number of rows in table, clustering factor for indexes and more numbers like this. They are not really needed for us human beings, they are used by the optimizer to generate the access plan.

HT1349 hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

hi guys i have 2 ? 1 my daughters iphone is trying to update on my mac cant get it off help please ,,, 2 i have an old apple id and when i try to up date it keeps looking for the password how do i delete this old apple id help

Hi.
I had a similar problem myself. This is what helped me.
I went to the App store app, scrolled to the bottom, logged out of the account, re logged in with my Apple ID. Then went back to app updates. Once I put in my ID password all was fine.

When my husband and I try to share our libraries and import from each others libraries, we get as far as seeing the library on the screen. The next step is to look for the 'Show' menu at the bottom of the screen, but neither of us has any such thing. ?

When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.

Hey fantail163,
If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using Apple Support Communities.
Regards,
-Norm G.

On my iPod touch it says on the settings I have wifi but when I look for the 3 bars there is no wifi please help

On my iPod touch it says on the settings i am connected to my home wifi but when I look for the 3. Bars beside the time they are not there this therefore stops me from using internet please help

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. already suggested
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

TS4062 I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. Any other suggestions?

I've done all of these recommended steps. My problem is that I have a new laptop that I am trying to sync my iPhone (and iPad for that matter) via Wi-Fi but both devices are looking for the old laptop to sync. My iTunes is version 11.0..3.42, iPhone is 6.1.4, and iPad 6.1.3. Any suggestions?

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

TS2776 I cannot get my IPhone to recognize my new computer; it's still looking for the old one.

My IPhone won't sync with a new windows 8 computer. It's still looking for the old one. How in the he11 do you change the name of the PC the IPhone looks for?

This user tip should be useful
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

I'm looking for the drivers to dual boot OS X 10.8.1 and Windows 7.

Hey everyone, I'm looking for the drivers that are needed once you install windows. I've got to dual boot due to school. But, I don't ever remember getting a CD or anything with my mac and was hopping I could download them and burn them to a DVD

No, you don't need to install a software update for Lion if you are now running Mountain Lion.

Satellite U500 (PSU9ME) - I'm looking for the Windows 7 display driver

Similar Messages

Maybe you are looking for