Save as eps in binary language

I need to save as eps from Illustrator in Binary, noy in ASCII.
Can you help me, please?
Thanks

A proper EPS printer or application is required to handle both types without problems, so it shouldn't matter how it's encoded. Anyway, your best bet is to use a generic PostScript printer driver. It seems that newer versions of Adobe programs only support their own specific flavor and have ceased support for the legacy EPS format.
Mylenium

Similar Messages

  • Should I open sent PDF's through PS (flatten then save as .eps) & then save as a PDF thru distiller

    Hi, I'm coming from a print background with newspapers where it was necessary to do the above with sent PDF's for print so that the fonts wouldn't bomb at print. I'm now working with a high gloss magazine and am wondering if it is necessary to do the same now. I have been doing it as routine with sent PDF's for print, once I ge the email I open in PS, make sure they are CMYK then flatten the image and save as .eps to open in Distiller and save as a PDF again. Again this was to make sure no fonts would bomb at print as per I was tought. (Used Quark when working with newspaper and thankfully am using InDesign for magazine). Is there any negative to doing this still? Even if the sent PDF's are fine (all True type font)? Could doing this, flatten and resave cause the iamges or fonts on the PDF's to lose quality at print? I'm pretty sure it wouldn't but I could be wrong with this higher quality print.
    Appreciate any advice here, as I'm slightly worried it may cause some loss of quality at print (fuzzy border around text - light but there). Thanks.
    Programs used are PS CS5, InDesign 5, Adobe Distiller 9. Final proofs are PDF's from InDesign to printer.

    The “workflow” you cite is absolutely not recommended for any purpose whatsoever. The only thing that can be said for it is that it produces consistently low quality results with extra steps and overhead. Forget about transparency and color management! The newspapers in question must have been either (1) working with antiquated, buggy RIP software from the previous millennia or (2) had personnel with mindsets and education from the previous millennia!
    Adobe strongly recommends use of direct PDF export from InDesign using the PDF/X-4 preset – never create PDF by distillation of PostScript!
    Although we strongly encourage use of OpenType fonts for their typographical features and cross-platform compatibility, in terms of output quality and reliability, use of Type 1 versus TrueType versus OpenType is irrelevant.
             - Dov

  • Save as EPS in CS3

    I work for a government agency that currently creates their graphics in Illustrator, exports them as EPS, and then places the graphics into MS Word templates for production. Sometimes, however, we have complicated graphics that use layerd transparencies. When these are saved as EPS files and converted to PDFs, white boxes and lines appear around the transparent objects. I believe it might be because the Transparency is flattened when you save as EPS, and this causes the lines to appaer (Saving out of AI directly to a PDF does not generate the white lines).
    My question: Is there any way to save from Illustrator to EPS WITHOUT flattening the transparency? Because of the current workflow of the agency, the graphics need to be in EPS format before being placed into the Word reports. We are upgrading to CS4 in the near future....might there be a way to do this in the new version? Any input is greatly appreciated! Thank you!
    Meredith

    the best solution its to save for web and devices and choose "png-24" . I use EPS only to interchange logotypes or simple draws with other designers

  • Javascript to create vector from image and save as eps

    Hi,
    I started writing a script which open all images in a folder and i need to turn those into vectors.
    How do i write the following in JavaScript:
    Open the JPG file
    Select the image layer/object
    Create a vector from the image using the Image Trace for high fidelity 
    Reduce the new vector objec size by %50.
    save as eps
    any help with any of the stages would be very helpful.
    thank you

    PERFECT!!!!!!
    This is exactly what I was going to build.  No need to create when it is already done.
    Thank you very much.
    -Mike

  • Is it possible to save as EPS file?

    I am making a logo using a couple of different fonts - no graphics. Is it possible to save as EPS file? Or, if not - is there a way to export it to another program that will save it as EPS file?

    OP - here is a thought.
    First, a Photoshop PDF with transparency is acceptable for InDesign. But many people want a flattened format to place in older programs such as Quark 6, or Pagewrecker.
    They often use EPS. Photoshop will outline all fonts in the EPS output. Also with EPS you do not have a dual file format, so you must save a copy. These are two fundamental differences between Photoshop EPS and Photoshop PDF.
    Here is another option if you need flattened output, but you still want the PSD info wrapped in a single file.
    Save as Photoshop PDF, layers checked.
    Select "PDF/X-1a" preset. By the standard, choose "None", When you do this "Photoshop Editing Capabilities" should default to enabled (if not, enable it)
    When you save in this fashion, you are saving a flattened PDF output with vector data for other applications, but you also retain the native Photoshop file. This file can be opened for editing in Photoshop and can also be opened for evaluation in Adobe Acrobat.
    Please, please be wary of Photoshop fonts. The fonts are embedded subset in the PDF, but sometimes you encounter glyph width errors when preflighting the PDF in Acrobat.
    Photoshop has vector capabilities, but these capabilities are half - baked. Each and every font glyph becomes a clipping mask for pixel data. Not an ideal construct. For some RIPS, Photoshop fonts can blow up like dynamite.
    I'm not trying to discourage utilizing Photoshop vector. But if possible, set your type in InDesign or Illustrator, it's safer in the long run.

  • Version 8 Standard - save as EPS

    I use Acrobat to save PDF's as EPS files to use as form overlays for some of our software applications. With version 7 standard, the EPS files were usually about 108 KB. With version 8 standard they are suddenly 521 KB. Anyone have any idea why the huge difference and if I can do anything about it (other than going back to version 7).
    Thanks.

    Are you sure you have not added graphics or such. It may be that the graphics resolution you have set in AA8 is higher than AA7. You might try reduce file size or PDF optimize (not sure either is in STD) and then a save as for the EPS file. That way you may be able to reduce the resolution. Another workaround that may have to be used with STD would be to print to a new PDF with a lower resolution selection in the settings file. Then see if that one will save to EPS ok.

  • Save as EPS defaults

    Is it possible to change the 'Save as EPS' defaults to 'Preset: High
    Resolution' and 'PostScript LanguageLevel: 3'?
    Michael
    mhphillips at gmail dot com

    Is it possible to change the 'Save as EPS' defaults to 'Preset: High
    Resolution' and 'PostScript LanguageLevel: 3'?
    Michael
    mhphillips at gmail dot com

  • Problems trying to save us .eps with the last version CS6

    Since a couple of weeks always i try to save a file us .eps the app doesn´t work. The windows progress open but doesn´t progress...

    Mylenium
    I didn´t because it is with all files. Old files, new one. Just do some draw, any one and try to save us .eps and then fail.
    Thanks

  • Can't save as 'eps' in Indesign cs6 trial.

    I am trying to design a logo and I am using a trial version of Indesign cs6. However, it will not let me "save as" an eps file. It only allows 'indesign cc template", "indesign cc document" and "Indesign CS4 or later".  How can I save my logo as an 'eps' on a transparent background so I can use it in the creation of my business card?

    All the google help pages say that you can save an eps file on a transparent background
    For example; http://smallbusiness.chron.com/create-eps-file-transparent-background-52652.html
    But I don't have the option in my Indesign "save as" > "format" drop down menu. It is so frustrating.
    I have been able to do it before, in Indesign cs6 on a PC.
    When you save a logo as an 'eps' file you onle see the actual logo making it very easy and functional to work with when using the logo to create a design. When you save it as anythig else the logo appears on a white page. Like a letterhead. on a document.

  • Save multiple channels to binary?

    I am trying to save multiple channels of analog signals measured using DAQ express. I want to save the waveforms to binary and be able to read them back to re-create the waveforms at a later time. I have tried writing the waveforms to binary as dynamic data and as arrays. Neither seems to work. I am not sure if my problem is how I am saving/writing the data or how I am trying to read it back. What is the best form to use to write the data and how should I read it back?

    Hi VCUBME,
    LabVIEW is shipping with some good examples that show how to store your data effectively using binary files or datalog files. Please try the "Write Binary File.vi" with the "Read Binary File.vi" for an exaple of storing simple arrays. If you need to store more complex data as for example clusters, then refer to the "Write Datalog File Example.vi" and "Read Datalog File Example.vi".
    Have fun!
    - Philip Courtois, Thinkbot Solutions

  • I cannot download and save an eps file in Adobe Photoshop Elements 12

    I am unable to open and save an eps file in Adobe Photoshop Elements 12

    No, EPS is one of the formats that adobe removed support for, starting with PSE 11.

  • Save As EPS dialog problem

    Transparency problem in Save As EPS dialog - disabled from yesterday without reason. Working fine 2 years.
    Please help. Tnx

    Do you mean the transparent radio button is not available. The options under transparency will only be available if your document contains some blending mode or overprint.

  • How do i disable to pop up asking me if i want to save or cancel the binary file i am trying to download?

    everytime i download a show or movie from the internet a pop up asks me:
    "you have chosen to open xxxxxx which is a: Binary File from: httpxxxxx would you like to save this file - SAVE or CANCEL"
    this never used to happen on the older versions of firefox. it is so annoying - is there any way to turn it off?
    i am running mac os 10.5.8 and no, there is no option to click a 'don't ask me again' feature in the pop-up dialog.

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/quicktime/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Adding crop marks to a documents with bleeds & save as EPS

    Working on Adobe CS6
    A sign maker has asked me to submit my artwork for different signs (quite a few of them, in different-sizes) as EPS with crop/trim marks.
    For instance: The size of this sign is 24"x24" with a .25" bleed.  The Artboard shows the right size, and the crop marks show uo as they should.  But once I let go of the Artboard, no crop marks show on my screen.
    Any crop mark I try adding via the Object ("Create Trim Marks") or Effect menu for crop marks, both cases would create them around the BLEEDS, rather than the REAL ARTBOARD, which, of course, defies the purpose of a crop or trim mark...
    I usually submit files for production saved as PDF w/bleeds & crop marks, but this sign maker wants them as EPS.
    Is there a way around it, other than create those marks manually?....
    ...Thanks.

    Set your artboard to the size of your sign and save the file as a pdf with "Trim Marks" checked and the bleed settings where you want them.
    Open the resulting pdf in acrobat and save as an .eps
    Open in Illustrator to verify that you're cross-marks were preserved.

  • Save as EPS with High Resolution

    Hi,
       When I save the file as EPS , I want to enable all the options in EPS Options Pallet.  I have enabled all options except setting high resolution in Transparency option.  If anyone knows please help me.

    Then, any other way to process this. How can I continue this process.

Maybe you are looking for

  • How to move group account from liability to equity

    Need to move one group account (summary account) from P&L to Balance Sheet in BCS system (one hierarchy to another). How to do it?What is the procedure? Any SAP notes or links would be helpful Also, if you could forward me notes for BCS and BW it wou

  • Install oracle 9.2.0 with SAP 4.6C SR2 in Solaris 10

    Hi, I'm hopeless with the installation of SAP. I'm going to try to explain oneself. I'm installing a SAP 4.6 C with Oracle 9.2.0 and under Solaris 10. After I've installed Oracle and checked its available, I continue with the installation of SAP, and

  • In yahoo mail "outbox" and keyboard won't pop up !

    I changed my password today and I can't access my inbox unless I verify that I am a human being by going into my "outbox" and entering the alpha/numeric characters.  Well, this should be simple enough but my keyboard doesn't pop up and I am stuck wit

  • Pavilion dv6 beats adio still not working

    I have tried the unistall and the install for the new progra.It didn't work. A message came up and said it had to abort the install because it was not supported by the IDT. I'm in need of some help. Mayday.

  • Imac will not eject cd

    The CD drive in my iMac will not eject CDs.  I often have to shut down the iMac and re-straert it several times before I can get it to eject CDs.  Help!