Save As feature in many programs

I upgraded to Mavericks and use Microsoft Office 2011. When performing a "save as" action for a document, I normally search for the proper folder through the spotlight feature that shows up in the menu. Since the update, as son as I write any letter in there, the “save” button get disabled and I cannot open any of the folders that show up. Anyone experiencing this issue? I use this all the time… This also happens in other programs (Acrobat) but not in Autocad.
I have tried to repair permissions and reinstalled office.
I would appreciate any help on this!

Similar Messages

Spell check feature in many programs

Hey-
In many programs, pidgin, tomboy, etc, I have the squiggly lines under my words as if they're misspelled. Is there one place where I set a dictionary, or can I set these program up to use openoffice's dictionary, gnome's dictionary, or firefox's dictionaries?
Really, i dont have a clue about this, all I know is that in other distros that's been done automatically so i dont know how to do it manually now.
Thanks
Miesnerd

I am pretty sure pidgin uses Aspell, possibly through GtkSpell. I know for certain that Tomboy uses GtkSpell. So you're going to need the Aspell dictionaries for the languages you want installed. Then it is dependent on locale which language it uses with English as default if the correct dictionaries aren't installed.
However, I know that for example for pidgin there is a plugin: http://plugins.guifications.org/trac/wiki/switchspell to set spell check languages... even different for each contact. I think there may be some system-wide way to do it but I haven't seen any.

Where did the "save as" feature go?

I just opened up a Pages document, after my Lion upgrade. I want to use the orginal document, make changes and save as a new document. However, when I clicked on "File" to go to the "Save As," I discovered it is no longer there. Where is the "Save As" feature now. This is, obviously, a crucial need.

Pondini wrote:
In most cases, though, you don't need a separate file. Just make a Version with Cmd+S.
Much faster, and takes up much less space, since it only saves the changes, not the whole document.
As a work machine processing files, folders, and graphics, in many cases I do, everyday.
Changing file name and format and still have the original to work with.
Seems crazy to me.
Message was edited by: leroydouglas
update: I was successfiul to create a keyboard shortcut for Duplicate not Export (my preferred.)

Save As feature in JSP

Hi there,
I have a JSP where the user needs to be shown a dialog box onclicking the "Browse" button (like the "Save As" feature on browser right click).
Currently the way I have it is that I have used Input type="file" in my form in the JSP.
But the problem is that this will not allow non-existing new filenames to be entered.
But the good thing was that I didnt have to program anything for the MS window to browse the filesystem.
Is there something like this for "Save as" or do I have to explicitly program for this.
I'd really appreciate your help.
Thanks in advance!

And here is the code scriptlet.....
<%@ taglib uri="/coreTaglib" prefix="core" %>
<%@ taglib uri="/dspTaglib" prefix="dsp" %>
<%     try {
               String fileName = "C:\\Temp\\Baseline_Export.xls"; //request.getParameter("fileName");
               File f = new File(fileName);
               if(!f.exists() || f.isDirectory()) { throw new Exception("The requested file does not exist.");     }
               String ctype = "application/vnd.ms-excel";
               response.setContentType(ctype);
               response.setContentLength((int)f.length());
               byte[] buffer = new byte[1024];
               int r = 0;
               FileInputStream fin = new FileInputStream(f);
               OutputStream out1 = response.getOutputStream();
               while((r = fin.read(buffer, 0, buffer.length)) != -1) {
                    out1.write(buffer, 0, r);
               try {
                    fin.close();
                    out1.flush();
                    out1.close();
               } catch(Exception e) {}
               out1 = null;
               fin = null;
               buffer = null;
          catch (Exception ex){
               String msg = ex.getMessage();
               System.out.println("Exptn in ExcelRenderer...."+ex);
               response.setContentType("text/html");
               response.setContentLength(msg.length());
               PrintWriter out2 = response.getWriter();
               out2.println(msg);
               out2.flush();
               out2.close();
%>

How to save/reinstall 9.2 iTunes, programs, when switching to Tiger?

Hi, fellow Macphiles!
I've got some serious questions about switching to Tiger. I hope some of you can help me!
For starters, I've been extremely reluctant to switch to OS X - period. I've been pretty comfy with OS 9.2 for a long time. But, alas, looks like the time's come to switch to not only a new computer, but Tiger, as well. So, here goes!
1. I have over 3 GB of iTunes on my computer. I'd like to save them and then transfer them to iTunes on the new computer I plan on getting (I'd be, of course, using the iTunes program that comes w/Tiger). How would I do that to make sure they work with Tiger's iTunes program? I don't have any huge Zip discs or anything major save 3 GB's of anything to.
2. I have Adobe Photoshop on my current computer. How would I save it and the transfer that program to a new Mac? Just put it on disc and then install it on the new Mac?
3. I've been using Outlook Express as my email client. How would I save my messages and other things in OE to transfer to Tiger? I really want to save these things but don't know exactly how I'd work that.
4. I have other things, also - pix, documents, AppleWorks documents, MS Word .... would I only have to save those all to a disc and then reinstall on the new computer?
5. What about saving my many Netscape bookmarks and transferring them to a new 'puter and Tiger? Possible?
-- please help, if you can. I don't want to lose everything I've put on my computer over the last 5 years in a big computer/OS switch-over. If I can't exactly figure this out, I'm going to have to stay 9.2, and I'd rather not, especially since there aren't any good or useful downloads out there anymore for 9.2's. Besides, I can't use a muchly-coveted iPod with 9.2. iPods are calling my name (another reason I don't want to lose my iTunes in a switchover)! Thanks guys!
iMac - G3 Mac OS 9.2.x

Welcome to the Discussions, Princess!
Switching from OS 9 to OS X will involve manually moving your files from your old computer via CD-R, external hard drive, or target disk mode. If your iMac G3 cannot burn disks, then the CD-R option is out; if no Firewire port on your iMac G3, then target disk mode is also out. Therefore, your options are external hard drive or network sharing.
Assuming that you are going to get a new Mac with an Intel processor, you need to be aware of various Application types:
OS 9 (Classic): these will not operate on a new Intel Mac
OS X (PowerPC): these will operate, but are not optimized for an Intel Mac
OS X (Universal): these operate, and are optimized, for both Intel and PowerPC
Without knowing exactly which versions of the Applications that you have, it is difficult to guess which category they fall into. The good news is that there are OS X versions of AppleWorks and Photoshop, and obviously iTunes. If you move your iTunes music to your new Mac, then it will probably be recognizable or importable by iTunes. Your email may be more of an issue, but many programs will import old mail including Apple's own Mail program. A new Mac comes with many other programs such as iPhoto, which overlaps some of Photoshop's capabilities. If you know where your bookmark file is, it can be imported into Safari.
Take it slow, and by all means ask more questions as you go.
Good Luck!
bd

Auto Save/Cache Feature?

Is there any chance Photoshop can develop a Auto Save/Cache feature, kind of similar to what Microsoft Word and other programs use?
If you're not familiar, if the program crashes or closes without saving, upon re-opening the program, it gives you a message to recover the unsaved data.
I'm tired of constantly getting crashing glitches in my photoshop program that causes me to lose all the work I've done.
I know the simple solution is to constantly save your work, but when I get into the zone with my work and I start getting on a roll with my artwork, I don't always remember to save.
I can work for a few hours when I get into my zone, and when the program glitches and crashes, all that data, artwork, inspiration and time is lost forever, and it is very discouraging.
I think developing an Auto Save/Cache feature would greatly benefit the program and help artists like me greatly.

Noel Carboni wrote:
Though it always seems to work for me, some Windows users have reported that it doesn't actually auto-save for them.
They need to move to OS X, then. It has better aesthetics, too.

How do you save battery life by closing programs under i0S7?

How do you save battery life by closing programs under 0S7? You used to click the home button twice, but now, since the update of 0S7, this feature seems to be gone.

click the home button twice, when you see the apps line up on the page, swipe the ones you want to close up and off the page. Scroll to access more apps, tap the home button once to exit the mode
For battery issues, look in the notifications. iOS7 defaults a lot on that you may not need. Also look to the background updating of apps. That can drain battery too.

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

I am using a program that opens a document in adobe and I need to save it back in the program. I get this message: this document is trying to connet to: fill://index.cfm?event=vendorsonly.submiteventform. Help

I am using a program that opens a document in adobe and I need to save it back in the program. I get this message: this document is trying to connet to: fill://index.cfm?event=vendorsonly.submiteventform. Help

Have you contacted the people who make the program? It sounds like something special from that program.

Save as Feature in Web page ( JSP)

Hi,
I want the user to be able to save some data on the browser machine.
I have a button Save as on the page. When User clicks that a file selector dialog pops up with a default file name. User can select the directory and file name and save it. The server program is in JSP. How do I do it? I am able to file selector dialog by setting content type as undefined or CSV.
But I am not able to give a default file name. Please help.
Regards,
Sanjay

buddy...
try this ..it'll help u to set the file name in the save as dialog box...
response.setHeader("Content-Disposition","attachment;filename=filename.extension");
for ex...
filename.extension = Gates.xls

I am running a laptop with windows 7 on it and trying to use the save as feature in Photoshop CS6 and won't let me save as anything. Please help?

I am running a laptop with windows 7 and am trying to use the save as feature in Photoshop CS6 and it wont let me save as anything. Can someone please help me with this?

A screenshot of your Photoshop work area showing the open file you want to save as, the Layers panel open, and the Save as... dialog open might give us a clue as to what is going on.
To take a screenshot and save it as a file
For Windows 7, Printscreen, open a New File in Photoshop, Ctrl v to paste, then save as jpeg (the other trick was for windows 8)
Use the Camera icon on your reply to upload it.
Also File > Save for Web is a good workaround if you just need a jpeg, png, or gif.
Gene

I''m new to Mac, how do I install Adobe CD? I put it in the CD drive and get a menu, everything I click on goes nowhere. In Microsoft, I installed many programs with no problem

I''m new to Mac, how do I install Adobe CD? I put it in the CD drive and get a menu, everything I click on goes nowhere. In Microsoft, I installed many programs with no problem

Is the Adobe CD a MAC app ?
If it is a program for Windows you will not be able to install it.
If you nedd that program you can either buy the equivalent for Mac or install a way to run Windows under Mac (may be a cheaper solution)

How to save varaint in a report program with tabstrip in selection-screen

Hi Gurus,
We have a custom report program and selection screen of this program has a tabstrip of 9 tabs. This program will run in background job and we are facing problem to save variant for this report program.
We saved one variant with 'TAB2' populated. But when we execute the report and select that variant and we are not navigated to 'TAB2' automatically. So, code for TAB2 is not triggerd and we are not getting desired output.
When we set this program with variant in Job, program is not navigated to 'TAB2' as per variant setup.
Is there any way to save variant for this kind of report ?
Please help with your suggestions
Thanks & Regards
Chandan

Thanks for your help.
I found during debugging that it is holding the sy-ucomm of the first tab as default value. So, I declared a new field in selection screen with No-Display option. When user will select a tab, this new field will hold the value of that sy-ucomm. As this field is in selection screen, it is getting stored in variant also.
In start-of-selection of program I am checking this field value and accordingly set the TABSTRIP.
Thanks again for your help.....
Regards,
Chandan

Many programs I used to use in Tiger doesn't work in Leopard

Here are the ones I've noticed have not been working or have errors:
iMovie
iChat
Yahoo Messenger
Adium
VisualHub
There are probably like 10 more but I haven't seen it yet. Why are so many programs are acting like this. I was thinking it was becasuse it wasn't ugpraded enough but I did install the newer version and it doesn't work.

Well, haven't we had to deal with a slew of updates every two years?
And at least Vista x64 is probably more secure, supports EFI (UEFI 2.).
The same people that would need a Mac Pro (dual cpu, 8GB RAM, etc) would be looking at 64-bit.
Did not Apple tout the G5 from IBM as finally being a 64-bit system? But yes, even Adobe CS3 is still 32-bit and limited to 3.5GB of user space, which there are work arounds for.
One person I tried to help was using Maya but his version doesn't work with Leopard, and blames Apple and 10.5 it seems, rather than realize he needs to consider an 8-core system rather than 4-core, more memory, make better use of disk and RAID, and of course... upgrade software or... WAIT FOR MAYA AND 10.5.x to catch up to each other!
People assume you have to wait for SP1 for Windows, but think they should jump rigtht in, when we all have seen that X.3 is usually the first "sweet spot" in any release.

Where is save as feature on Lion ?

Where is save as feature in Lion ?

I understand that in Mountain Lion (10.8), Save-As is back - but it is a HIDDEN feature. To be honest, I never got used to the Duplicate function in Lion, so I am thrilled that this may be back - it was in the beta version of Mountain Lion.
Do a Google search to find the article that discusses this - if I recall, I read it on Gizmodo. Once you find it, I think you can turn it on so that Save-As is a permanent feature, or one accessible via the Control or Option keys.
Best of luck! I am thrilled!

Save As feature in many programs

Similar Messages

Maybe you are looking for