Save member to file on Mac - w/Shockwave?

I was using DirectXtras on the PC and Mac, and now I need a
Shockwave safe way to save a cast member to a file on Macs - I'm
not finding any that work in Shockave - anyone?

Thanks for sending me to the right vendor (Tabuleiro)! I
purchased ShockFier - works great on CD and in Shockwave!
http://xtras.tabuleiro.com/products/shockfiler/index.tdb

Similar Messages

  • Unable To Save Quark XPress File In Mac OS 10.2.8

    I have been trying to save a layout I created using Quark XPress 6.1 on an iMac with a 10.2.8 OS. When I first created the document, I was able to save it with no problem. However, after I had done some more work on it, I tried to save the changes -- but all I got was a message that said "Cannot find required volume or folder [-35]." The folder I have been trying to save it to is still there. I then tried using Save As to save it in a different location or under a new name -- but then I get an "Unknown error [-51]."
    I tried to solve the problem by consulting Help, but all I was able to find is that apparently the error is occurring with the OS, not with Quark XPress.
    I spent hours working on this document and will be sick if I am unable to save it. Can anyone possibly help me? I'd really appreciate it. Thanks.

    How big is your hard drive, and how full is it?
    How big are files like the one you are trying to save?

  • When saving an Illustrator file on mac, it deletes the file Tags. Why or how to solve it?

    I save an Illustrator file on mac, and when doing so, I create a Tag for it.
    Whenever I make some changes and save the file again, the tag (or tags) disappear. Why?
    Thank you very much,

    Hi John
    I have indicated on the attached jpeg where the problem is, basically a line of text is missing at the top and part of the feeding diagram is missing. I created the artwork in different layer and then flattened. All text has been converted to outlines, however the areas being affected have no transparency, I have used solid fills or no fills. I get the same result when I export the file as a jpeg. Hope you can help.

  • I have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

    i have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

    Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

  • I transferred a pages file from ipad to mac (also pages) via email for editing. However received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately. Ideas?

    I transferred a pages file from ipad to mac (also pages) via email for editing. It opened normally. However, after editing, received message that cannot save edited document to the mac because "trial period has expired for iwork"! I have purchased pages for both machines separately and presumed they would work without a hitch. Am I missing something?

    It used to be that to update the trial to the licensed version with the box, you just inserted the DVD & ran the installer to convert the trial to licensed. This changed with Snow Leopard. You now need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user.
    Yvan Koenig has written an AppleScript that removes the files. You can find it on his iDisk in For_iWork > iWork '09 > uninstall iWork '09.zip.

  • How to save Android contacts as Excel file on Mac computer?

    I want to manage and edit my contacts on my cell phone, my friend suggested me save them as Excel format! So now i am trying this way, but i can't find the right method to do this! Do you know how to save Android contacts as Excel file on Mac computer?

    If you want to save Android Phone contacts to Excel format, you can have a try the following method:
    Step 1. Connect Your Android Phone to Computer
    After downloading and installing the Coolmuster Android Assistant software on your computer, launch it and you will get the program interface prompts you to connect your phone to the computer. Just use a USB cable to connect your phone to the computer and the program will detect the connected phone automatically. If it is the first time to run this software, you may encounter the following picture and be required to enable USB debugging on your phone at first. If your device can be detected by the program, you can directly skip to the next step.
    Step 2: Go to the Contacts windows
    All your phone data are categorized on the top menu. To transfer Android phone's contacts, you can go to click the "Contacts" icon to enter the Contacts window. Navigate to the left panel and click on the "All Contacts" option, then, all the contacts in your phone will show in list on the right window. Mark the contacts you want to backup on your computer and click the button of "Backup".
    Step 3. Start to export contacts to computer at once
    Once you click on the "Backup" button, there will be a "Path" dialog appears, asking you to choose an output location where you want to save the exported contacts. Specify an output folder and then click the "Ok" button. Then, all your phone contacts will be exported to the output location immediately, with all the email address, company's name, home address, and more contacts info perfectly kept in the output CSV or XLS file.

  • How do i save files from mac pro to an external hard drive

    how do i save files from mac pro to an external hard drive

    Your external drive is formatted NTFS which OS X can read from but not write to. You can either install third-party software on the Mac to enable writing to the drive or repartition and reformat the drive for exclusive use with the Mac. If you don't need to move files between a Mac and a PC, then I would recommend the latter solution.
    Tuxera NTFS 2012.3.2
    NTFS for Mac OS X 9.5.3
    To repartition:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select the external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • How to save video messages to a file on Mac?

    How to save video messages to a file on Mac? Please, help. Thank you.Claire

    Claire, I use a Mac w/ the latest copy of Skype and it IS possible to first play the file and then download it.  Steps are available for it but it involves some technical wizardry that can be above some muggles.   Then I found a post where some some VERY bright person made a small downloaded program for the Mac which once the video message has been played recently, you can run this program and download the file for safe keeping ( ALWAYS BACKUP or store it in the cloud for safety )  Kudos are deserved to user alvarop for this! http://community.skype.com/t5/Mac/Video-Message-Exporter-App/m-p/2351609 It worked for me to download a video message that I recently played back.  Let me know if you need any assistance getting it downloaded you can PM me on here and I'll be happy to help with a screenshare. Best Regards,-Shawn G

  • Unable to save or open files in Excel from Office 2011 on my Mac Air with Mountain Lion?

    Excel 2011 no longer saves or opens files?

    I found this page under Microsoft's web area listing known issues with Excel 2011 on the Mac.
    One is entitled "You cannot save a file that includes a hyperlink".  That and/or other references on this page might be helpful.
    http://mac2.microsoft.com/help/office/14/en-us/word/item/4ba243ae-1afa-4283-ba6a -d2a020dcc07a

  • Can new shockwave Player 12.0.4.144 run shockwaved Authorware files on Mac

    Can new shockwave Player 12.0.4.144 run shockwaved Authorware files on Mac?
    OS 10.5 or greater.
    If so, please direct me to were I can learn how to do it, and if not, is there any way to run these files for Macs?

    The Director Shockwave Player can't play published Authorware content. You'd need the Authorware Web Player. However, it works on older Mac OSs.
    You can find the player links at:
    http://www.adobe.com/shockwave/download/alternates/#ap
    Dean

  • Save a song file in logic expres 2 upload to my new mac usin logic studio?

    how do i save a song file in logic express to put into my new mac tower running logic studio ??

    Save as project and select the option to copy audio files; that will create a folder containing all.
    Now move the folder on your mac tower and open the project.
    cheers
    rob

  • HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

    Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

    To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
    defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
    Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
    killall SystemUIServer
    You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

  • I am trying to import outlook .olm file to Mac Mail, it is not working

    I am trying to switch my mail to Mac Mail I have 8 GB of data from Mac Outlook. It saves as .olm file I am trying to make this work???

    Use the clients and temporary folders (mailboxes) on the mail server as a form of a conversion utility.
    Launch whatever mail client can read whatever client-specific archive format containing the source mail messages, access the archives from that mail client, select and then move the messages from the archive to temporary folder(s) you've created on your mail server.  
    These "temporary" folders are used to avoid getting your archived mail mixed in with your current mail; you probably don't want to dump a hundred old messages into your current inbox, for instance.
    Launch the target mail client, select the tempoary folder on the mail server, select-all the messages in the folder, and transfer (drag) the messages back from the server.
    Using select ranges or seelct-all to select ranges of messages, you can transfer buckets of mail messages in bulk with a drag operation between folders.   
    Your transfers will be limited by the storage quota on your mail server, so use whichever mail server you have with the largest quotas as your "conversion" mail server.

  • How can I make a droplet save a modified file next to the original file?

    I am having a problem getting a Photoshop Droplet save a modified file next to the original file. That is, when I drag a file "page_6.pdf" from some directory onto my droplet, I want it to do its work and save a modified "page_6.psd" in that same directory.
    This isn't working for me on Photoshop CC 2014 on Mac OS 10.10.
    I have an Action which has an Open command, with the filename "page_1.pdf". Then it has a bunch of editing commands. Then it has a "Save As... Photoshop format" command, and a Close command. When I run this action within Photoshop, it brings up Open and Save As dialogues, and works fine.
    In creating the droplet, I used File... Automate... Create Droplet..., and selected the following options:
    Override Action "Open" commands
    Destination menu value = Folder
    Using Choose... button, select an output folder, Directory_1/ .
    Check Override Action "Save As Commands" is checked
    For File Naming, I use [Document Name] + "_deleteme" + [extension]
    When I drag a folder, say "page_5.pdf" from some directory onto the droplet, Photoshop runs the Action on the document. However, it saves the modified document in Directory_1/, regardless of where the original file came from. And it always names the modified document "page_1_deleteme.psd", instead of using the Document Name of the original file.
    If I modify the Open command in the Action to mention a different file, then the droplet always names the modified document with that name. It's as if Document Name in the File Naming dialogue always reflects what's in the Open command in the Action.  But -- I asked the droplet to Override Action "Open" commands!
    When I set the Destination menu value to "Save and Close", then when I drag a file onto the droplet, the droplet opens a File Save dialogue and forces me to tell it where to store the file.  I don't understand this behaviour, and have a hard time reconciling it with the documentation at Photoshop Help | Processing a batch of files .
    (Interestingly, when Destination menu value = None or Save and Close, Photoshop displays an alert about overwriting an existing droplet when I click OK to save. But when Destination menu value = Folder, there is no alert about overwriting existing droplet.)
    How can I set up a droplet so that it writes the modified file in the same directory as the original file, and with the same root filename, but a different extension to reflect the different output file format?
    Has anyone else made a droplet behave this way on Photoshop CC 2014 on Mac OS X 10.10?
    Thanks in advance for your help.

    Thanks for your insights.
    Does my Action need to include an Open command?  I sure thought so, because of how the Photoshop Help | Processing a batch of files documentation describes 'Override Action “Open” Commands'.
    "...If the action contains an Open command that opens a saved file and you don't select this option, the Batch command opens and processes only the file you used to record the Open command..." I don't want to operate only the file I used to record the Open command. However, this sentence doesn't say that an Open command should be part of a droplet Action.
    "...Deselect this option if the action was recorded to operate on an open file..."  Maybe I if I rethink my Action as operating on an open file, then the Droplet will take care of the Open for me.  However, I have less control over the options the droplet's Open command uses.
    I'll try disabling the Open command, and create a Droplet with that.

  • Should I set up my external hard drive as HFS when copying PC files to MAC

    I have just purchased an external hard drive and hooked it up to my PowerMac G5 running OS X. My Mac is networked to a PC via Wi-Fi. When using my Mac I can open/delete/save files to my PC and drag them to my Mac.
    I would like to back up my whole PC onto the firewire external drive. I only have a firewire connection on my Mac, so I don't want to unplug it and set it up on the PC as well.
    Are there any issues if I format the drive using Disc Utility and format it as HFS, then simply drag the files and applications from my PC to my external hard drive. If the PC fails, will I have any issues when I drag the files back to a networked PC via my Mac?

    Backing up an entire hard drive via Wi-Fi would be very slow and perhaps unreliable. I would really look into getting a firewire interface for the PC to accomplish the back-up. These cards are not very expensive and it would be a good investment.
    You may have trouble when returning files from an HFS drive to your PC. Some of the files may appear doubled as ._FILENAME and FILENAME. The ._ file is used by Mac OS and is hidden, but is not used by Windows and shows as a separate file. MacDrive6 from MediaFour (http://www.mediafour.com/products/macdrive6//) can solve this problem, as well as allow an HFS+ formatted drive to appear in the Windows explorer when connected via Firewire, but there may still be problems with a backup procedure using drag and drop. It is probably best if you want to do this to format your drive as a Windows drive.
    Also, backing up PC application and system files (or Mac ones for that matter) by dragging and dropping is a bad idea. Especially on the PC, but also occasionally on the Mac, applications install files in various system locations that are not easily accessable. It is best to restore applications and system files from the original software installation CD's or DVD's. If this is not possible, or inconvenient, look for a PC backup utility that is similar to Carbon Copy Cloner for the Mac (http://www.bombich.com/software/ccc.html). Utilities such as this can create an image of a hard disk for backup purposes on any drive recognized by the system. I am sure there are many good PC backup utilities available, many probably as freeware.

Maybe you are looking for

  • Discovered: Method of running full screen on 13" MBP

    Been running my MBP 13" with Logic recently and decided to look into a way of getting it full screen, and think i've found a solution. Now, what i will be doing is instead of displaying the standard 1280x800 resolution, i will instead display a scale

  • Creation of Purchase requisition with reference to Contract documents

    Dear All I am not able to create the Purchase requisition with reference to Contract documents, in outline agreement field if I enter the contract document number which is already existing it is not copying the details, again I have to enter all the

  • Blinking lights across ipod ttouch and white light strip at the bottom

    there is kind a lightening across I pod touch and white light strip at the bottom ? does it need to replace battery or there is some reason ? some time it display is normal bit then it starts again ???

  • Router model wrt 160n v2 help!

    i have a router wrt 160n v2 and i need a good amount of help ive tryed calling linksys support and they tell me the same thing everytime and its not the problem, i have a modem that uses a USB and before its worked just fine then about 3 weeks ago it

  • About source system parameters.

    when I create a source system in BW for connecting to R/3,what's the meaning of available destination(it provide several options,I think they are logical system and all refer to BW itself).There are 2 logical server targets,BW and R/3,but they are th