Save Temporary data from Standard infotype for 9003 infotype module pool

Hi,
I need to save some data from infortype 0000 screen call that needs to be used in some other program.
Pleasse suggest any way out.
Regards,
Shashank

need to resolve for new questions..

Similar Messages

How to save a datas from serial port?

How to save a datas from serial port?

Hi
I need some help about rs-232 communication. I want to make a vi witch can do this things:
-read a txt file (to simulate a serial port like when the datas are coming)
i will get 3 different data in serial port (like this: 121 213 135)
i want to save in a txt file what datas get my vi
so
-write in a txt file or draw in a diagram (or both)
so my problem is: read in serial port and save in a file and draw a diagram.
if anybody can help pls HELP ME because im a beginner in this problem.
I already do something but Im not sure that good.
Thx for all.

How to Fetch Data From Standard Table MARA and Display using BOPF ?

Hello All,
In BOPF creation of Quey to a node fetches data from the Data Base Table attached to that Node,
But in my requirement I have to fetch data Present in a Standard table and Display it in the FPM List Using FBI.
** Can we Fetch the data From Standard Table and fill the Node in BOPF, Is this possible as the standard Table do not contain KEY field which BOPF uses for Data Fetching ?
Kindly share your Idea's .
Thanks in Adv.

Hi Dhivya,
Thanks For your Response.
In my Requirement I want to make ROOT Node as Transient Node.
When I create a Sub Node to a Root Node, I am able to get this option to make this sub node as a Transient Node .
By selecting 'Standard<-->Extended' option in the Menu item 'GoTo' I am able to get this Transient Node check box field for the Sub Nodes.
I want to make a ROOT Node as a Transient Node.
(Which Version you are using, and which transaction you are using to create BO . we are using BOBX Transaction, Version Ehp 6 )
Kindly Guide me .
Thanks,
Kranthi Kumar.

Save triggered data from 2 modules

I am using SignalExpress (3.0) with USB cDAQ-9172, a NI9203 current and NI9201 voltage module. After Acquiring data (continuously), I am using a software trigger on the 9203 current signal to analyze and save the triggered data (collected from all 8 channels on 9203). However, I am not able to save the data from 9201 voltage module? It looks like the software trigger only accepts a single module input (I think). As shown in the attachment "trigger Input.jpg" I can only select 1 module as the input for the software trigger (either the current module or the voltage module)
Is there any way to trigger on a single channel and then save data from both modules?
Thanks!
Ryan
Solved!
Go to Solution.
Attachments:
trigger Input.JPG ‏32 KB
Step setup.JPG ‏51 KB

Hey Ryan!
You can actually do all of this in one DAQmx Acquire step. There is a tab in the Acquire step where you can specify your triggering. Then there is a recording options tab up at the top where you can choose to save your data when the logging starts to a TDMS file that can be read in excel.
Doug Farrell
Product Manager - Condition Monitoring
National Instruments
National Instruments Condition Monitoring
Attachments:
sigex.png ‏21 KB

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?

Is it possible to save / extract data from a MS SQL database 2008 using lookout 6.2?
Now a days we are saving / extracting data in a excel spreadsheet, but we would like to do that using a database because it is better.

You can use ODBC connection to work with SQL Server database.
Use SQLExec object to execute the SQL statement. Here is a KB about the SQL statement.
http://digital.ni.com/public.nsf/allkb/4ADEEA04CD24AE0B862565E20002A16F?OpenDocument
To write data to spreadsheet is more straightforward because Lookout has built-in spreadsheet object. But you need to write SQL statement by yourself to interact with other database.
To read the data back is the same way. Just use "select" SQL statement to query. You can use Datatable object to query.
The "Data Source" can be "DSN = data source name;". The data source name is configured in Control Panel->Administrative Tools->Data Sources(ODBC).
Ryan Shi
National Instruments

How can i save the data from the Oracle database to my local directory

How can i save the data from the Oracle database to my local directory instead Of saving the data file to the Directory created on the Oracle Server ?
I require to design the Procedure which will pull the data from various tables and needs to store the data in the Client's local directory.

Since SQL*PLUS runs on the client, you can use SQL*PLUS to spool data to your local drive.
You could also use the database to write a a specified drive where all users have access to (mapped network drive, e.g.). I wouldn't recommend doing it that way, but it is sometimes useful when the files are created in some nightly batch run.

Error :Unable to retrieve data from iHTML servlet for Request2 request

I open bqyfile to use HTML in workspace.
When I export report to excel in IR report.
Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
And I can not open any bqyfiles in workspace.
Anybody gat the same question? Thanks~

Hi,
This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Hope this helps..

TS3804 "io6" I am unable to save a photo from another app (for example FACEBOOK) to the Camera Roll. I press & hold the photo, the window indicates "Save Photo" comes up, I press that option & the window goes away but the photo is not in Camera Roll.

IPHONE 4 + "io6". I am unable to save a photo from another app (for example FACEBOOK) to the Camera Roll. I press & hold photo, window indicates "Save Photo" comes up, I press that option & the window goes away but the photo is not in Camera Roll. Please advice...

Steve750717 did yu notice that the post is 6 months old?

How to load data from Quikbooks into PeopleSoft General Ledger module ?

Folks,
Hello.
My client's data is currently stored in Quikbooks.
After install PeopleSoft FSCM 9.0, I need to load the data from Quickbooks into PeopleSoft General Ledger module. But I don't know how to use PeopleSoft Integration Broker to integrate with Quikbooks.
Can any folks tell me how to load data from Quikbooks into PeopleSoft General Ledger module ?

Hi,
If the data load is one time process, then you can use PL/SQL or datamover to load the data to PeopleSoft application.
If you want to load the data in real time, then you need to create In-bound and out-bound nodes to perform the transaction.
Thanks
Soundappan

Date Format in DD-MM-YYYY in Module Pool

Hi,
How can I show date in DD-MM-YYYY Format in Module Pool
Thanks

declare a field of length 10 in ur screen and use this logic
data : gv_datum(10) type c,
          gv_dt like sy-datum.
        gv_dt = sy-datum.           "here u can give the date field .
CONCATENATE gv_dt+6(2) gv_dt+4(2) gv_dt+0(4)
        INTO gv_datum
        SEPARATED BY '-'.
write:/ gv_datum.
regards,
vijay

Calculator for addition using module pool

Hai all,
   I going to create a calculator for addition using module pool .
   i have set a screen 9001 and i placed a box and inside that i
placed 9 push buttons with the naming of 1,2,...9 as same as the normal calulator
then i have a "PLUS" push button which is used to add the 2 numbers and i have a "SUM" push button in 9001.
when i click the SUM push button it will call screen 9002 which have the input box for the result purpose.
can i do this or not??
i know it is little complicated but i need ur help..and also tell me can push button hold value or not??
                              thanks and regards,
                                  pradeep.
Moderator Message: try it and find out for yourself.
Edited by: kishan P on Jan 19, 2011 4:18 PM

Hai maha,
Using i/o is very simpler one that i know but i need to create by using 9 push buttons.
                                                                         thanks,
                                                                         pradeep

How to use data from standard view in Web dynpro for ABAP

Hello:
I have to create an Abap Web Dynpro, and I must use data from a standard view in the new one. Does anybody know what do I have to do?
Thank you and have a happy new year.

Hi Rodrigo,
Firstly, list the Standard component under Component Usage of the Component which you are creating in your View.
Second, In the Custom Component, view, goto context, and try to add the node from the Standard component in to your view.
NOTE: The second step requires a Node in component controller of the Standard Component.
Finally, Now in your view, get the data from that and map the data.
NOTE: To do this, I think you need to call your Standard WDA first and then only your node contains data and it will be passed.
I hope it is helpful.
Regards,
Shashikanth. D

How to save the data from AI Read.vi?

Hi,
The main target is that testing the strength of a object which is extended by a force. The desired results are
1. The strength of object under the force(main target, I am trying now);
2. Displacement of object being extended(I have mimicly done);
3. Images of deformation of the object extended(I have mimicly done).
4. The sub procedure will stop when the object under testing is broken. I intend to use the big pulse from force sensor by analizing the data acquired.( it is more difficult if using machine vision).
What I am mainly trying to do now is implementation of a sub vi to collect the data which is acquired from channel 0 of PCI-6052E which is connected to a force sensor. I have tried to use an existing exam
ple as attached with some modifications. I have tested the data from the sensor by comparing to measurement by multimeter and it takes sense. But
1. I still don't know how to save data displayed by AI Read.vi? And use what kind data type could save more memory?
2. I think that memory management is very important because each points of the result includes its strength, image and displacement. How can I acquire enough significant points for the final results being reliable and save these data down to an array or cluster synchronously? (each sub procedure has no time limited)
3.Because I think that a continuous data acquisition would occupy ALL CPU TIME and their related images and displacements would have no chance to be taken down by CPU at the same moment. Am I right?--I am sure that it is not very difficult problem but my mind is still in caose and the time is quite limited to me now.
I am looking for your sugguestion or solution or control philosophy too. You can modify the fi
le attached if you can. I will learn from your idea.
Thank you very much for your time and energy!
Your
Swedlin
Attachments:
Acquire_N_Scans_1_10.vi ‏75 KB

Hello;
Regarding your question on the data type that would use less storage space, the answer is binary type. Actually, you can use another shipping example as start point of your application. The example I'm mentioning is a data logger, that saves binary data to a file on your hard drive. You can find that example at Search Examples->I/O Interfaces->Data Acquisition->Data Logger->High Speed Data Logger.
Regarding your question about the CPU time, the statement is valid. In case you use a synchronous AI task, the CPU execution will get stuck inside the AI Read.vi untill the buffer is ready to be read. One thing you can do about that is to change the acquisition task to be asynchronous. There is a good example in Labview showing how you can accomplish that.
You can find the example at Search Examples->I/O Interfaces->Data Acquisition->Analog Input->DAQ Occurrences.
You can combine both examples to accomplish the task you need.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Save input data from popup modal MVC

Hi I am trying to save data from popup. When I execute my controller side data is not saved. Please see code below:
View:
@model IEnumerable<Model>
<h2>Manage Dimension</h2>
<link href="@Url.Content("~/Content/Gridmvc.css")" rel="stylesheet" type="text/css" />
<script src="@Url.Content("~/Scripts/gridmvc.min.js")" type="text/javascript"> </script>
<script src="@Url.Content("~/Scripts/js/bootstrap.min.js")" type="text/javascript"> </script>
<link href="@Url.Content("~/Content/bootstrap/css/bootstrap.min.css")" rel="stylesheet" type="text/css" />
<link href="@Url.Content("~/Content/bootstrap/css/bootstrap-responsive.min.css")" rel="stylesheet" type="text/css" />
@using (Html.BeginForm())
@Html.AntiForgeryToken()
@*<html>*@
<body>
<hr />
<div class="table-responsive">
<table class="table table-striped table-hover">
<thead>
<tr>
<th>
ID
</th>
<th>
Name
</th>
<th>
Value
</th>
<th>
Action
</th>
</tr>
@foreach (var item in Model)
foreach (var i in item.Values)
<tr>
<td>
<span data-bind="text: ID">@item.ID</span>
</td>
<td>
<span data-bind="text: Name">@item.Name</span>
</td>
<td>
<span data-bind="text: Value">@i.Value</span>
</td>
<td>
<button type="button" class="edit-mode" data-toggle="modal" data-target="#myModal" id="c.ResellerId">edit</button>
</td>
</tr>
</table>
<div class="modal fade" id="myModal" tabindex="-1" role="dialog" aria-labelledby="myModalLabel" aria-hidden="true">
<div class="modal-dialog">
<div class="modal-content">
<div class="modal-header">
<button type="button" class="close" data-dismiss="modal" aria-hidden="true">×</button>
<h4 class="modal-title" id="myModalLabel">Edit/Add Dimension</h4>
</div>
<div class="modal-body">
<div id="dialog-form" title="Create new user">
<form>
<fieldset>
<label for="name">Name</label>
<input type="text" name="name" id="name" value="" class="text ui-widget-content
ui-corner-all"><br /><br />
<label for="email">Value</label>
<input type="text" name="value" id="value" value="" class="text ui-widget-content
ui-corner-all">
</fieldset>
</form>
</div>
</div>
<div class="modal-footer">
<button type="button" class="btn btn-default" data-dismiss="modal">Cancel</button>
<button type="button" class="btn btn-default" id="inviteRequest">Save changes</button>
</div>
</div>
</div>
</div>
<br />
<br />
<div class="modal-footer">
<button type="button" class="btn btn-primary" data-dismiss="modal" data-toggle="modal" data-target="#myModal" data-bind="click: Save">Add</button>
</div>
<script src="~/Scripts/App/Modal.js"></script>
@*<script type="text/javascript" src="https://ajax.microsoft.com/ajax/jQuery/jquery-1.4.2.min.js"></script>*@
@*<script src="@Url.Content("~/Scripts/js/bootstrap.min.js")" type="text/javascript"> </script>*@
<script type="text/javascript">
$(document).ready(function () {
$('#inviteRequest').click(function () {
console.log(1);
$('#myModal').modal('hide');
$.post('/ManageDimension/Create', { "Name": name, "Value": value })
alert("You clicked me!");
window.location.reload(true);
</script>
</div>
</body>
</html>
Controller:
[HttpPost]
public ActionResult Create( DataModel dimension)
if (ModelState.IsValid)
db.Save(dimension);
return RedirectToAction("Index");
else
return View(dimension);

Hi,
This is a forum for Visio.
To get more professional support, I recommend you post this question in MVC forum.
http://forums.asp.net/1146.aspx/1?MVC
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who
read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Greta Ge CHN
TechNet Community Support

Save Temporary data from Standard infotype for 9003 infotype module pool

Similar Messages

Maybe you are looking for