Saving contact information

I just upgraded to the iphone 6. When I add a new contact it will appear and be saved. Once I go and add another contact, my previous contact is deleted. I also seem to be having this problem on the calendar. On certain dates when I add an event it will save and on other dates it will not.
Help
Angie

Your contacts will not be visible in the Desktop Software as its main use is to provide wired syncronisation to your PIM program such as Lotus Notes or Outlook.
When you setup your backup, it allows you to specify what you backup - default settings from memory is everything, including your contacts.

Similar Messages

  • Saving contact information from my 8300?

    How can I save all my contact information from my 8300 and transfer it back to the replacement 8300 that I will be receiving from my corporate office in the next few days? Most of the contacts are backed up on my email contacts, but for things like pictures and other contact information saved on the device? If you have any ideas, please let me know. It is my understanding that you can upload your information to the Blackberry site some how, but I am really not sure.
    Thanks ahead of time for any advice you can give here!
    Best Regards,
    Tim

    Simply make a backup of the old device using Desktop Manager, then restore that backup on the new device before activating it on your BES (if necessary.)
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Saving "Default " information in contacts

    Hi All
    I'm hoping that someone has the answer because my fingers are starting to sting, this is the third time that I have had to go through the 150 contacts on my E71, and set the Default for Text Message, Call, email, Video call etc, It happened when I sync'd with Ovi.
    All my contacts are sync'd with Mail for Exchange, and normally I switch all the other syncs off because of this problem, the other night I noticed that Ovi didnt have the correct handset so I mistakingly sync'd it and it wiped all my defaults off.
    Surely there is some way of saving the default contact information? - on my backups - none of the default information is saved there either.
    Any ideas appreciated. 
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

    Interesting... have same problem, and same date!!! But have not found out what caused nor how to fix it!

  • How do I change the default folder for saving contacts?

    I have happily used Outlook for several years for POP accounts.  My recent addition of an Exchange account has hijacked several default behaviors that I was used to.  For one,  contacts are now saved by default in the exchange related contact
    folder instead of the folder that is associated with my primary POP account.  How do I reconfigure Outlook to saved contacts to my preferred folder, so that I don't have to constantly move the new contacts after they are saved?  I do not want this
    information on the exchange account.  This bad behaviour occurs no matter what email account is read, from which I am saving the contact info.
    To reproduce the problem:  Open a message in the POP email, right click on the FROM email address, choose Add to Contacts from the menu, find the contact stored in the exchange contact folder instead of the contact folder for the POP account (the folder
    that Outlook USED to save to prior to adding the exchange account).
    Work around: (annoying the first few times, mentally unhealthy after more than a few) Save the contact, then manually move it to the correct folder.

    Hi,
    What version of Outlook are you using?
    I have test this in Outlook 2010/ Windows 7.
    If set POP as default outlook data file(.pst),
    Open a message in the POP email, and right click "Add to Contact" in FROM with External email address, it will save to POP contact folder.
    If the Email address end with @Exchange.com, it always save to Exchange contact folder, no matter what is default email account, maybe this behavior by default.
    Hope this helps.
    William Zhou
    TechNet Community Support

  • Status of Backup Assistant for Contact Information

    Can some one tell me (preferably a Verizon technical resource) the status of Backup Assistant for Contact Information?
    I upgraded to a new phone a few weeks ago, and when searching MyVerizon saw the availability of the "free" contact backup capability...     It is not really free for me, because I don't have a data/text plan, so I had to pay for the app download and sync text transfer.    I figured it would be worth a few dollars to have the backup capability and ability to enter data from a keyboard instead of the numeric pad (I have a flip phone without a qwerty keyboard).     The sync import of my phone's contact list worked fine, and I spent quite a bit of time updating addresses online...   However, the changes online were not exported back to my phone, so my  work added no value me.  
    I attempted to wait a few days to see if a regular update would resolve the problem...   Tried making a few updates today--the web application seemed buggier than a few weeks ago...  If I tried to input more that a one field, it refused to save the contact.   I could update by doing small updates and saving, but this was painful...   Tried several times to update the ICE contacts--they would appear to be OK, but after a save the changes were lost...
    Tried reading documentation to see if there was an explanation of how to download changes made online to phone...     Could find nothing other than instructions to download to a "new" phone...
    Came to the forum to see if there was a message here that would help me...   I was very disappointed to see that the Backup Assistant has apparently been "broken" for several weeks with no apparent resolution timeframe available.  
    As an IT guy, I was appalled that Verizon does not have anything on the web site that warns users that there is a problem with the site and gives an approximate resolution time for the problem.    This is always a priority for my group--make the users aware of the problem and give them status on resolution progress.  Verizon's lack of information has let me waste time and money trying to work with an application that is known to be broken.
    Key questions for me:
    1)  Can the cost of downloading backup assistant and the syncing be refunded to me?   (The service to date has only provides me with a frustrating online update experience with no benefit to me on my phone.)
    2)  When will the site be functioning with normal capability?
    3)  What is normal function?   Are the problems that I have had with updates due to the problem discussed in other posts or are they standard features of buggy code?
    4)  If the application were working normally, how would one do updates online and have those updates exported back to the phone?

    BillW wrote:
    Can some one tell me (preferably a Verizon technical resource) the status of Backup Assistant for Contact Information? I doubt you will get anything but the "canned" response from the employees and techies....we are aware of a problem and have no estimated time of resolution. 
    I upgraded to a new phone a few weeks ago, and when searching MyVerizon saw the availability of the "free" contact backup capability...     It is not really free for me, because I don't have a data/text plan, so I had to pay for the app download and sync text transfer.   Yeah, I hear that.  $1.99....  I figured it would be worth a few dollars to have the backup capability and ability to enter data from a keyboard instead of the numeric pad (I have a flip phone without a qwerty keyboard).     The sync import of my phone's contact list worked fine, and I spent quite a bit of time updating addresses online...   However, the changes online were not exported back to my phone, so my  work added no value me. That's where the current issue is - syncing online changes back to the phone. 
    I attempted to wait a few days to see if a regular update would resolve the problem...   Tried making a few updates today--the web application seemed buggier than a few weeks ago...  If I tried to input more that a one field, it refused to save the contact.   I could update by doing small updates and saving, but this was painful...   Tried several times to update the ICE contacts--they would appear to be OK, but after a save the changes were lost...
    Tried reading documentation to see if there was an explanation of how to download changes made online to phone...     Could find nothing other than instructions to download to a "new" phone...  The "sync" with the online system is supposed to happen automatically.  I set the option on my phone (go to BA on the phone, Options >> Set Schedule.  I have mine set to late night.)  It is supposed to connect to your online backup and sync any changes.  Mine shows last back up at 10 days ago, and I am not inclined to hit the "back up NOW" option as that is what seems to be causing loss of contacts form the phone.
    Came to the forum to see if there was a message here that would help me...   I was very disappointed to see that the Backup Assistant has apparently been "broken" for several weeks with no apparent resolution timeframe available.  
    As an IT guy, I was appalled that Verizon does not have anything on the web site that warns users that there is a problem with the site and gives an approximate resolution time for the problem.    This is always a priority for my group--make the users aware of the problem and give them status on resolution progress.  Verizon's lack of information has let me waste time and money trying to work with an application that is known to be broken.
    Key questions for me:
    1)  Can the cost of downloading backup assistant and the syncing be refunded to me? Once the app is downloaded, there is no data charge for the syncing... and I doubt you will get the refund of the $1.99. (The service to date has only provides me with a frustrating online update experience with no benefit to me on my phone.)
    2)  When will the site be functioning with normal capability? No clue...
    3)  What is normal function?   Are the problems that I have had with updates due to the problem discussed in other posts or are they standard features of buggy code?  It has worked as you expect it would, for me, in the past.  I have used it for years, actually, and been pleased, and recommended it to others.  The recent debacle is very disappointing.
    4)  If the application were working normally, how would one do updates online and have those updates exported back to the phone?  Normally, it would be automatically synced to your phone when you log out of the online service, and then a daily backup from your phone to the website would occur on the schedule you set.
    I am not a Verizon employee, I am simply a customer, satisfied for the most part with my service, and I like to help others.  This recent BA mess is not fun....and I hope it gets resolved very soon.

  • Emails and contacts information is missing

    I changed computers today and logged into Verizon to set up Outlook Express on the new machine. all of my old emails are gone; as are my contact information. it had old stuff saved from three years ago but nothing recent. Help? how do i retreive my messages and contact info now?

    Anything in Outlook is stored on the individual computer. It will not be stored on the website anywhere. You would need to Export all your emails and contacts from your old computers outlook program. Then take the file it creates and Import them to your new computers Outlook.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • [SOLVED] error occured while loading or saving config information

    When I try to launch applications from my menu it takes ages to appear and I get the error:
    'an error occured while loading or saving configuration information for 'application name'. Some of your configuration settings may not work properly'
    in the details section I get:
    'Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or that you have NFS locks due to a system crash. See (a website for gnome's gconf) for details.'
    I don't understand this as I don't use gnome, I have openbox.
    any help appreciated.
    List of affected apps:
    firefox
    thunderbird
    terminator
    Apps that load unusually slow:
    Thunar
    Apps that do nothing:
    Banshee
    EDIT: If I cannot get this fixed by the end of the week I will have to go back to ubuntu as I need this machine working.
    Last edited by llawwehttam (2010-02-09 20:30:52)

    Cyrusm wrote:
    I think I may have found a solution,
    can you print the output of
    ls -la ~/ | grep .dbus
    apparently this problem can happen if ~/.dbus is owned by root.
    to fix it AS ROOT (or sudo)
    chown -R $USER:users ~/.dbus
    here's my source, there are a few things in here you could try as well.
    http://ubuntuforums.org/archive/index.php/t-780179.html
    Hahaha, thank you so much.
    It was owned by root so I have now fixed that.
    It was my own stupid fault then running a command as root that should have been run as a user?
    I will never forget this, the embarrassment is killing me..... lol

  • Safari 5.1.1 problems saving my information

    Two sites I visit often, one of which is Clinique.com, is having problems. When I contacted their tech, I was told the problem is in Safari. It's not saving my information. I've run TechTool and Disk Utility. Any ideas?

    I think it's useless because, as far as I can tell, everything it does is either pointless or can be done just as well without it, and because I've seen reports that it has, or has had, data-destroying bugs. I know Apple used to distribute a drastically simplified version of it with AppleCare, and maybe still does. That was a marketing agreement, in my opinion. I've been using Macs for many years, and I've managed to get by without any version of TechTool. You can too.

  • How can I get my lost contact information back?

    I have to get the replaced iPhone due to the problems that I had with the old one. Everything was backup on my PC. Last night, when I was trying to sync it and get the info back, I got my texts and pictures back but all my contact information and apps that I've purchased. and since it was sync I assumed the previous information are lost. I know I have the backup from the day before chaning my iphone saved on my PC but I don't know how to get them back. I have above 300 contact info. Please advise. 

    If the apps exist in the iTunes library on the computer, connect the new iPhone and tell iTunes what to sync.
    If the contacts are synced to a supported application or cloud service, as they are designed to be, then set that up on the device.
    If the contacts were simply stored on the device, then they were restored when restoring from backup.

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • The saved printer information is not compatible with this version of Photoshop

    Hello,
    I hope somebody can help us. I am a IT Technician in a school, we have approx 500 Windows 7 64bit machines with about 600/700 users - 200 machines have the CS5.5 Master Collection installed on them. We have an intermittent issue with printing from Photoshop (both the 32bit and 64bit versions). Our printers are mostly HP LaserJet printers (all modern), but we have an Epson B-510DN Inkjet and some Xerox copiers too. The drivers are all installed on a central print server running Server 2008 R2 and shared via Group Policy to client machines.
    In rooms where Photoshop is installed, intermittently when a student goes to print we will recieve the following error:
    The saved printer information is not compatible with this version of Photoshop, or the saved printer is no longer available. You will need to check your printer settings before printing.
    Photoshop will then grey out the 'Print' button and won't let the user print again. The odd thing is that we can still print from other software such as Microsoft Word or even non Microsoft software - even Illustrator will print. It just seems to be Photoshop thats has any issues.
    This happens when printing to any printer on site, 90% of which are HP's. As a general rule we configure all of our HP printers with HP's PCL6 Universal Print Driver as it makes management of various printer models easy, and we haven't found it to limit us atall yet. We are aware the Adobe software is 'preferential' to Postscript drivers but our printers arn't, being HP's PCL is their native language. We have tried changing a printer to the Postscript UPD driver to test it but it made no improvement. We have also seen the issue quite indepth with our Epson B-510DN which is configured with Epson's latest model specific driver as our photography department use it. Since we are seeing it with different printers I don't believe the printer drivers are to blame - unless somebody want's to prove me wrong.
    Like I say the problem is intermittent, and we are having trouble tracing it down to a user, computer or a software problem as it is so intermittent. Has anybody else seen this and managed to overcome it? Since it's only happening in Photoshop is it a bug that Adobe have recognosed and fixed in CS6? The only workaround we have found for it is to go into printers, chnage the defualt printer from one to another and back again - this seems to shut Photoshop up.
    Thanks, Dave.

    Chris,
    Apologies for my slow reply - we have been busy here the past few weeks.
    We are using a standard Microsoft provided JPG image (Tulips.jpg) so we have ruled out it being an issue with the image; perhaps if we were using a PSD, maybe so.
    We have now found out what the issue is, and what the workaround for this bug is. All of our printers across our site are named in a specific format, usually [Location name] [Room number] [Mono or Colour] resulting in printer names such as Photography A11 Colour, Art A2B Colour and Design Technology A14 Colour. All of these names contain numbers. We have tried reimaging machines, reinstalling Photoshop, upgrading to CS6, deleting and reconfiguring printers with the same name. Finally the only solution that worked was to take the numbers out of the name, either by renaming or deleting and reconfiguring the printers. The Photography printer is an Epson B-510DN using a model specific driver and the other two use the HP PCL6 UPD driver, so I don't believe the drivers are to blame and since renaming the printers work I don't believe it's a configuration issue either. Remember that these printers are shared from a print server and deployed via Group Policy (using the Print Management method).
    I hope this provides you Chris, and others searching Google, a useful explanation of the problem and what the fix is. As much as Adobe won't admit it's a problem/bug, I and many others across the internet believe that it is and that it should be fixed in future versions of Photoshop.
    Thanks, Dave.

  • My iphone 4s is importing contact information from FB and my email account.  When I pull up my contacts it only shows e-mail information and the phone numbers have disappeared.  How do I get my old contact list back with the phone numbers?

    My iphone 4s is importing contact information from FB and my e-mail account.  When I try to look at my contact list it is showing everyone I have on those lists and it only shows their email addresses.  The phone numbers for my contacts have disappeared and I don't know how to get them back.

        Hi macmac57. I don't memorize my numbers anymore, so I know how important it is to have all your contacts on your phone at all times. Did an update occur or a new application download when your contacts disappeared? Have you been backing up your device with your computer? You can try to restore your contacts from your last backup. http://support.apple.com/kb/HT1414
    Are you syncing your iPhone between multiple computers? This can sometimes create issues with your contacts. http://support.apple.com/kb/TS1474
    If you were already using iCloud to back up your contacts, check out http://support.apple.com/kb/TS3998 for some great tips from Apple.
    I do hope this has been helpful for you to restore your contacts.
    JenniferH_VZW
    Please follow us on Twitter @vzwsupport

  • How do I remove the shared link that's shares my contact information? I need to remove the link off all my contacts and not just on an individual basis. Somehow my boyfriends iPhone can see all of my contact information.

    Unshare my contact information so no one is able to see it.

    In addition my icloud is turned off and I also removed the shared linked off of my boyfriend's contact information on my phone but he still has access to all my contact information. I see the shared links in all my other contacts as well but I'm not sure if unlinking each contact will help. Is there another way to unshare the contact information?

  • Error in saving customer information. Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.

    I was trying to create a text alert. I was calling following in jsp
    email.setContactPointPurpose(myLookUpCode); //say XXMY_SMS_SHIP
            PartyManager.createEmail(email, ApiConstant.CONTACT_POINT);
    Getting following exception:
    Error in saving customer information.
    Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.
    Error trace:
    oracle.apps.ibe.customer.CustomerException: Error in saving customer information. at oracle.apps.ibe.tcav2.Email.create(Email.java:187) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Caused by: oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) ... 11 more Error in saving customer information. oracle.apps.jtf.base.resources.FrameworkException: Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE. at oracle.apps.jtf.util.ErrorStackUtil.getFrameworkException(ErrorStackUtil.java:104) at oracle.apps.jtf.util.ErrorStackUtil.getDBFrameworkException(ErrorStackUtil.java:141) at oracle.apps.ibe.tcav2.Email.create(Email.java:185) at oracle.apps.ibe.tcav2.PartyManager.createEmail(PartyManager.java:116) at _oa__html._myfile__ibeMyFile._jspService(_myfile__ ibeMyFile.java:908) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:662) Value for contact_point_purpose must be a value defined in lookup type CONTACT_POINT_PURPOSE.

    Tried this but it is giving the below error
    APP-FND-01242: Cannot read value from field PER_ASSIGNMENT_ID
    Cause: The field PER_ASSIGNMENT_ID could not be located or read.
    Action: This error is normally the result of an incorrectly-entered field name string in a trigger, or a field name string that does not uniquely specify a field in your form. Correct your trigger logic to precisely specify a valid field.

  • I have PSE13 on my system.  It was functioning properly and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to c

    I have PSE13 on my system, Windows 8.1, 64-bit.  It was functioning properly after installation and now I get these messages when I go to print:  "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You need to check your printer settings before printing."  and then this statement:  "Default printer could not be opened."  I have reloaded drivers for both printers and made any upgrades possible.  It was working fine before and now all of a sudden, nothing.  Would prefer to have old PSE v.12 back, it worked with no problems.

    See this thread
    My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

Maybe you are looking for