Saving data when reimporting at higher bitrate

I'm in the process of re-importing my CD collection at a bitrate of 320 (AAC). As I do so, I'm finding that the downloaded CDDB information undoes the changes I made to it when I imported it the first time. This makes it necessary for me to change the information again before re-importing.
Is there a way that iTunes can link a CD to the information that's already present in the existing files (instead of downloading them again from the internet)? It would be a real time saver...
Powerbook G4, Power Mac G5 Dual 2.0 Mac OS X (10.4.8)

The (embedded) artwork is automatically copied to the 'fresh' imported tracks when iTunes performs a 'Replace Existing'.
That routine is not included in the script (you cannot add artwork to CD tracks), so I guess iTunes stores the artwork 'somewhere' and adds it to the track after re-ripping.
If for some reason iTunes does not copy the artwork to the re-ripped tracks, drag the artwork of the 'old' album from the Artwork pane to the desktop.
After re-ripping a CD, select the 'fresh' imported tracks and drop the artwork on the Artwork pane again (must be set to 'Selected Item').
M

Similar Messages

Safely saving Data when you have the gray folder with question mark?

I'm starting to get the folder with the question mark and I've tried everything but reinstalling Mavericks. I don't want to reinstall because I really need my data. Is there any safe way for me to save my data before I fix the problem on my mac? Would firewire work? I don't have the cable but I don't want to go and buy one right now without knowing if it will work. I'm not all that knowledgeable on computer terms either. If anyone can help I'd REALLY appreciate it.

What model of Mac is it?
Do you have a backup of the Mac or any of the files on it?
Do you have access to another Mac & a disk large enough to copy the data from the failing Mac?
Using 'Target disk mode' with Firewire or Thunderbolt may work to read data however you need another Mac to access the failed Mac and a cable to connect between them. Obviously the connection types depend on the Mac model(s). You need Firewire or Thunderbolt on each Mac.
Target disk mode - http://support.apple.com/kb/HT1661
How did you get into this situation? Did the Mac just start doing it or have you run some cleanup software or done something else recently?
The flashing question mark means it cannot find a valid startup disk.
1. Try holding alt at startup & see if a list of disks appears. Select the main boot disk if it appears, otherwise hold the power button to shut down if nothing appears - report what happens here.
2. Boot into recovery & see if the main disk shows up & can be verified/ repaired.
Boot holding cmd+R. Recovery mode should startup (assuming you have a recovery partition).
Select Disk Utility in the list of options
In Disk Utility select the 'boot disk' this is usually the item above 'Macintosh HD' (or whatever your boot disk is called).
Select the 'First Aid' tab
Repair any disk damage that is reported via 'verify'. Then select The 'Macintosh HD' & repair the permissions too.
3. It may be possible to run third party repair or recovery tools, do you have Disk Warrior, Tech Tool Pro or any other Mac apps for this?
4. Report back here with info about what other Macs you can access etc
5. It may be possible to reinstall 10.9 without loosing your data, the default 'reinstall OS X' option will try to replace the OS files & leave all your user data intact. If the disk is still functioning & has a valid partition this could make it bootable. HOWEVER if the disk is damaged beyond repair it will need to erase the disk - DELETING all your data. Personally I would take a backup before doing this, even if it meant waiting to use a friends Mac (or a trip to the Applestore).

Saving data when downgrade from windows 8 consumer preview

Can anyone walk me through the process of downgrading back to windows 7 from windows 8 cons preview? from what i understand my personal files will be protected, is there anyway to put my programs on a recovery disc?

Hi,
Please check this. The recommendation is to run it one a different machine (I bought one secondhand laptop just for this) or run it under VMWare (I've done this too).
http://www.forumswindows8.com/general-discussion/revert-back-windows-7-a-5358.htm
I would not bother to try W8 preview now becaause it will only last for few months. You should try it from late 2011.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT201210 i lost data messages / photos and other saved data worth 2 months cause there was some problem when i was updating ios7 how can i recover that?

i lost data worth 2 months when i was updating the ios7 software on my iphone 5 .....
unfortunatley i forgot to perform a backup in that time span as well....
is there a way of recovering txt msgs photos and other saved data from a particular span? without backups?

Without a backup there is no way to recover data.
Seems you've learned a valuable lesson about how important it is do regularly backup the device.

Dates when saving picture

Hello,
I would like to get "today's date" when saving a picture. At the present when I save the picture, it keeps its original date.
No clue how to do that in windows 7 with Photoshop CS5 at 64.
Thanks for info.
Bert

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

WLI problem when processing a high number of records - SQLException: Data e

Hi
I'm having some trouble with a process in WLI when processing a high number of records from a table. I'm using WLI 8.1.6 and Oracle 9.2.
The exception I'm getting is:
javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
I think the problem is not with the table because it's pretty simple. I'll describe the steps in the JPD below.
1) A DBControl checks to see if the table has records with a specific value in a column.
select IND_PROCESSADO from VW_EAI_INET_ESTOQUE where IND_PROCESSADO = 'N'
2) If there is one or more records, we update the column to another value (in other DBControl)
update VW_EAI_INET_ESTOQUE set IND_PROCESSADO = 'E' where IND_PROCESSADO = 'N'
3) We then start a transaction with following steps:
3.1) A DBControl queries for records in a specific condition
select
COD_DEPOSITO AS codDeposito,
COD_SKU_INTERNO AS codSkuInterno,
QTD_ESTOQUE AS qtdEstoque,
IND_ESTOQUE_VIRTUAL AS indEstoqueVirtual,
IND_PRE_VENDA AS indPreVenda,
QTD_DIAS_ENTREGA AS qtdDiasEntrega,
DAT_EXPEDICAO_PRE_VENDA AS dataExpedicaoPreVenda,
DAT_INICIO AS dataInicio,
DAT_FIM AS dataFim,
IND_PROCESSADO AS indProcessado
from VW_EAI_INET_ESTOQUE
where IND_PROCESSADO = 'E'
3.2) We transform all the records found to and XML message (Xquery)
3.3) We update again update the same column as #2 to other value.
update VW_EAI_INET_ESTOQUE set IND_PROCESSADO = 'S'   where IND_PROCESSADO = 'E'.
4) The process ends.
When the table has few records under the specified condition, the process works fine. But if we test it with 25000 records, the process fails with the exception below. Sometimes in the step 3.1 and other times in the step 3.3.
Can someone help me please?
Exception:
<A message was unable to be delivered from a WLW Message Queue.
Attempting to deliver the onAsyncFailure event>
<23/07/2007 14h33min22s BRT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction
Xid=BEA1-00424A48977240214FD8(12106298),Status=Rolled back. [Reason=javax.ejb.EJBException: nested
exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.],numRepliesOwedMe=0,numRepliesOwedOthers= 0,seconds since begin=118,seconds left=59,XAServerResourceInfo[JMS_cgJMSStore]=(ServerResourceInfo[JMS_cgJMSStore]=(state=rolledback,assigned=cgServer),xar=JMS_cgJMSStore,re-Registered =
false),XAServ erResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=(ServerResourceInfo[weblogic.jdbc.wrapper.JTSXAResourceImpl]=
(state=rolledback,assigned=cgServer),xar=weblogic.jdbc.wrapper.JTSXAResourceImpl@d38a58,re-Registered =false),XAServerResourceInfo[CPCasaeVideoWISDesenv]=
(ServerResourceInfo[CPCasaeVideoWISDesenv]=(state=rolledback,assigned=cgServer),xar=CPCasaeVideoWISDesenv,re-Registered = false),SCInfo[integrationCV+cgServer]=(state=rolledback),
properties=({weblogic.jdbc=t3://10.15.81.48:7001, START_AND_END_THREAD_EQUAL=false}),
local properties=({weblogic.jdbc.jta.CPCasaeVideoWISDesenv=weblogic.jdbc.wrapper.TxInfo@9c7831, modifiedListeners=[weblogic.ejb20.internal.TxManager$TxListener@9c2dc7]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=
(CoordinatorURL=cgServer+10.15.81.48:7001+integrationCV+t3+,
XAResources={JMS_FileStore, weblogic.jdbc.wrapper.JTSXAResourceImpl, JMS_cgJMSStore, CPCasaeVideoWISDesenv},NonXAResources={})],CoordinatorURL=cgServer+10.15.81.48:7001+integrationCV+t3+): javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
        at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1844)
        at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:227)
        at com.bea.wli.bpm.runtime.ProcessContainerBean.ejbStore(ProcessContainerBean.java:197)
        at com.bea.wlwgen.PersistentContainer_7e2d44_Impl.ejbStore(PersistentContainer_7e2d44_Impl.java:149)
        at weblogic.ejb20.manager.ExclusiveEntityManager.beforeCompletion(ExclusiveEntityManager.java:593)
        at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:744)
        at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:1069)
        at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:118)
        at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:1202)
        at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:2007)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:257)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:228)
        at weblogic.ejb20.internal.MDListener.execute(MDListener.java:430)
        at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:333)
        at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:298)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2698)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:2610)
        at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
        at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: javax.ejb.EJBException: nested exception is: java.sql.SQLException: Data exception -- Data -- Input Data length 1.050.060 is greater from the length 1.048.576 specified in create table.
        at com.bea.wlw.runtime.core.bean.BMPContainerBean.doUpdate(BMPContainerBean.java:2021)
        at com.bea.wlw.runtime.core.bean.BMPContainerBean.ejbStore(BMPContainerBean.java:1828)
        ... 18 more

Hi Lucas,
Following is the information regarding the issue you are getting and might help you to resolve the issue.
ADAPT00519195- Too many selected values (LOV0001) - Select Query Result operand
For XIR2 Fixed Details-Rejected as this is by design
I have found that this is a limitation by design and when the values exceed 18000 we get this error in BO.
There is no fix for this issue, as itu2019s by design. The product always behaved in this manner.
Also an ER (ADAPT00754295) for this issue has already been raised.
Unfortunately, we cannot confirm if and when this Enhancement Request will be taken on by the developers.
A dedicated team reviews all ERs on a regular basis for technical and commercial feasibility and whether or not the functionality is consistent with our product direction. Unfortunately we cannot presently advise on a timeframe for the inclusion of any ER to our product suite.
The product group will then review the request and determine whether or not the functionality/feature will be included in a future release.
Currently I can only suggest that you check the release notes in the ReadMe documents of future service packs, as it will be listed there once the ER has been included
The only workaround which I can suggest for now is:
Workaround 1:
Test the issue by keep the value of MAX_Inlist_values parameter to 256 on designer level.
Workaround 2:
The best solution is to combine 'n' queries via a UNION. You should first highlight the first 99 or so entries from the LOV list box and then combine this query with a second one that selects the remaining LOV choices.
Using UNION between queries; which is the only possible workaround
Please do let me know if you have any queries related to the same.
Regards,
Sarbhjeet Kaur

Album artwork doesn't synch when converting higher bitrates

Hi!
This worked before so not sure if it is the new version of iTunes (10.6) or the iOS (5.1). When I have the convert higher bitrate to 128 kbps checked, it imports the song but if the bitrate is greater than 128 kbps, the artwork doesn't get imported.
I've tested it with it checked and without and it works when you don't do the conversion.
Looks like a bug to me...anyone else run into this issue?

Hi,
Got the same issues when using the conversion to 128kbps.
Everything is fine when the bitrate is already 128 or without using the conversion.
NB : I don't have the issue with my old iPod nano when using this option, so maybe it's an iOS issue.
-Z-

When and how to update the "saved data" in report ?

Hi,
The BO version is "BusinessObjects Enterprise 12.0"
The case is that, some reports are uploaded withe saved data. while viewing the reports, the reports return the old data.
How to view the update data while click the "View" in CMC/InfoView ?
I have tried to schedule it , then can see the update data in "View the latest instance".
Is there any approach to refresh/update the saved data in the report ?
Thanks and regards,
Forest
Edited by: Forest lin on Dec 5, 2008 12:12 PM

Hello Forest lin,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

How to back up saved application data when moving to new iPhone?

So I've done a fairly extensive search on google trying to figure out how to backup not just my apps, but the saved data within them as well. Most of the stuff I'm finding requires jailbreaking or many steps. I'm coming here to post to see if there is an 'easy' way to do this by now..
I mean you back up your old iPhone through iTunes but from what I'm hearing that does not save the application data? I don't understand how this was not put in, especially considering how the iPhone is made to look like such a great portable gaming device, in which many save your progress along the way..
For example, I have peggle on my iPhone 3G and have been playing it a little bit here and there for a little more than a year and have 100% completed on most levels. I don't want to lose all that, you know?
So anyways, is there any simple way to do this yet? If not, what's the simplest way to go about doing this?
Thanks!

Thank you for responding... I wonder then why so many posts are regarding this online...
So all I need to do is back up my 3G iPhone in iTunes, and then just restore from backup with the iPhone 4 and all my saved data and stuff will remain? Cool!

Locking form when multiple users try saving data

Hello,
How can I prevent users from saving data in the same form at the same time? is there anything to lock a form once a user opens it for entering data??
As if 2 users are having access on the same form, and accidentaly they opened the same form and selected the same combination of dimensions, if both of them saved data. The data will be overwritted by the latest one...and this is not the required scenario......we need to have it only possible for one user to open this form at a time.
Is it possible?
Thanks.

Hi,
As Kyle said, the issue would be only if both the users update/modify the same cell.
However said that, is it possible that same cell would have different values, even if two different user enters the data at same time?
Means data entered would have to be same even if it is entered by different users. (Just asking out of curiosity :) )
Also process management can be thought off, wherein only current owner can fed data(free form).
Hope this helps.
Regards
-SM

When converting higher bitrate songs to 128 does it alter the music library on the pc?

I have an iPhone 5S 64 GB and an iPod Nano 6th generation 16 GB that I sync to a windows based PC. I have 15.28 GB of music on my PC. It fits nicely as is and at the higher bitrate. I would love to put all that music on my iPod. I am curious if I convert the higher bitrate to say 128, does this affect the music on my PC and on my iPhone or does it just convert the music and put it on my iPod?

The music on the PC and iPhone won't be affected.
(109535)

Itunes "convert higher bitrate songs" not working properly

hello,
i recently used the option "convert higher bitrate songs to 128kbps aac" to save storage space on my iphone. it worked like a charm and i saved several gigabytes.
HOWEVER, as soon as i sync my iphone again, it starts to reencode approx. 60 tracks again! it takes a while of course and after that, the tracks are converted and on my iphone (i checked it). if i sync again it will reencode again the very same tracks (and delete them before from my iphone). this is really annoying because it costs time and cpu usage.
i didnt changed those files, i checked the date when they were changed, and they werent changend at all this month!
does anyone have an idea? i really like this option, but if it means that i have to convert 60tracks everytime i sync my iphone, i will have to disable it...
regards

I am seeing this artwork bug too, on my nano. It seems to be tied to the 128 kbps songs, but I can't pinpoint exactly what makes it happens.
All I know is, now that I'm using the 128 conversion, I have to reset my nano at least once per day to get artwork back. It also seems to be tied to coming out of pause or hold. After I've paused music and come back later, the artwork shows a white box. But not all the time, so I wonder if it's only when I pause a song that has lyrics.

Premiere Elements 12 crash, lost all saved data on a new project.

I was working on a short project that had many video and audio clips. About 3 hours into the project Premier Elements 12 crashed. Now It will not open the saved data. It simply tells me "An unknown error occurred while opening the project" Am I SOL? Is this what I should expect as a regular from Adobe? More importantly, is there a method to recover the project? I am a new user to Adobe Elements and video editing in general.
Thanks,
Jordan M-

I've attempted to update the software. When I open the program up and go to the Help tab and Check for Updates, it tells me that it is already up to date. I've noticed through screen shots that other users' icons say 12.1 Mine does not and I still have performance issues while trying to render or upload.
My computer runs high end games at max settings, so as far as I can tell, my computer works fine. I would like to understand these updates further before I continue to analyse the issues I am having.
Also,
I ran a Program Compatibility Test and it tells me:
Issues found:
Program Compatibility:
Incompatible Application (referring to Premiere Elements 12)
Publisher Details:
Make older programs run in this version of Windows,
Package Version 1.5
Publisher Windows.
Make older programs run in this version of Windows,
Package Version 1.0
Publisher Microsoft Corp."
Detection Details:
"Windows Version 6.1
Architecture x86"
I don't want to flood you with to many questions. My priority is to just update the darn thing to see if that is my issue. I thought I would mention the test above as additional info that might be helpful.
Thank you for your help thus far, It's been of great use.
Jordan-

Report prints Saved Data not Refreshed Data

We were running VS 2005 and using the Basic CR 2005 Basic that comes with it. We upgraded to use CR 2008 and found MANY issues after we went live in production that were apparent in the development. This has caused a lot of stress with us as well as our users. Iu2019ll summarize everything we found, possible workarounds and the open issues including the Printing/Loading of Saved Data.
First, it was reported that printing changed. It turns out when PrintMode = u2018PDFu2019 (default setting) it now asks after you choose u2018EXPORTu2019 (use to be u2018OKu2019) that it asks to Open or Save the Adobe. When our customers were running 20 some reports at a time and we had hundreds of users, this became a nuisance for the heavy reporting users and a training issue in general for us. With research, I found that we can change the PrintMode to be u2018ActiveXu2019. This was much better when we were testing. However, in Production it became a nightmare. If the user is on a Domain that disallows itu2019s user from installing software or if the user has tight security settings, this became a nightmare.
The second thing reported was that it was exporting to the wrong format. It was exporting into RPT format. It turns out with CR2008, it automatically defaults to RPT and the new pop-up, doesnu2019t isnu2019t clear to the user they even have a choice (the pop-up is much prettier, but it doesnu2019t look like a dropdown anymore). In addition, they reported it was taking twice as long to export (we think it was related to export file type now). With CR2005 Basic, it would have no default selection and if the user didnu2019t pick one, it would remind them they need to pick one. After much research, I found there is no way to customize the operation of the export without writing my own export. My users 90% of the time want to export to PDF and Excel the rest of the time. Since we arenu2019t using a CR Server like product, they NEVER will do RPT. There is no way with CR2008 to limit this list or to default the File Format. So now, if they forget to select the type, they get the wrong file format instead of being reminded to select one. Since the new pop-upu2019s dropdown selection isnu2019t easily apparent, this was a BIG issue for us. Since I have close to 300 reports on 7 websites, this will be a lot of work for me to write my own code and change all the ASPX page to use my own control.
The third thing reported was that the default name on Exporting was changed. Export uses the ID property of the Crystal Report Viewer as the default name of a file on export. When it replaced the viewer on all our pages, it set the ID to CrystalReportViewer1 instead of preserving the original ID. We now have to go back and change them to what we wanted manually. BEAWRE of this! For our power users who wanted to export 40 reports they now have type the name in manually on all of them. What took minutes now takes over an hour for them to do, until we can fix all the pages.
Now it was reported that some reports are showing OLD data. It turns out there shows Saved Data from design time. In our site, we have a parameter page which getu2019s user selected parameters, save to a session and then load the report page using the session variables, and then redirect them to the report page which on page load we set the reports parameters. We use the CrystalReportSource using ODBC. The report has all the connection information. Well if the user happens to select the same parameters I used at design time, it wonu2019t pull the data from the database. They see our test data instead which is garbage. If they select different parameters, display the report and then go back and select the original parameters, they will get the correct data. This can be catastrophic for us! So I added at the beginning of the Page Load before setting parameters the following:
     If Not Page.IsPostBack Then
            CRSServiceAlertsReport.ReportDocument.Refresh()
     End If
This seemed to work. A pain to add on every report page though when it wasnu2019t necessary before. But then I just got called this morning and they say when they print, it prited the OLD data. It seems the refresh pulled new data and updated the display in the viewer but the ActiveX print still used the original Saved Data! I couldnu2019t find a solution for this. I found switching PrintMode back to u2018Pdfu2019 worked but now I have the extra click issue again, which I described above. I tried setting the reports u2018Discard Saved Datau2019 option but it still had the data!
In the end, had I known about all these issues I would have NEVER upgraded to CR2008. Iu2019m still looking for help on getting by the following:
u2022     Stop using Saved Data at runtime (either on Display or Print)
u2022     Getting the PrintMode=u2019Pdfu2019 to just pull up Adobe in Open mode without prompting the user.
u2022     Remove File Type options from Export
u2022     Set the default File Type options to nothing or something I want.
Another nice feature to have would be the ActiveX control for printing to be part of the .NET Framework so users donu2019t need to download it. Come on BO is a big company Iu2019m sure they can work with MS. 

What is that method to clear Saved Data; I looked and couldn't find it. I never had to call one in the prior version of CR 2005 Basic in .Net. With the .NET controls, it always refreshed the data before. This is a change in behavior for me.
As for the Print using Adobe, with CR2005 Basic, it didn't prompt the user to Open or Save before. This is new behavior. It used to just open the report in Adobe in memory before without this specific prompt (it did have the first prompt for All or specific pages, but it would just open after that). This is a change in behavior from prior versions and it has caused me several issues.
Many users don't like change and I didn't know to communicate this to them. They were taken by surprise. We'll learn to live it I guess, but I would ask you just to consider, why have an option to "Save" to PDF when you choose to print? I would think you would use Export if you want to save. It would never hurt to add an option to allow alternatives either.
As for including with .NET Framework, it was just an idea. I know how hard it can be working with third parties. However, given that CR Basic comes with it, I thought it may be possible to work with them. The better the integration the better the product is for the developers. I was thinking the button could call JavaScript/Java to print instead of an ActiveX, or some other method. Since I donu2019t know how the Control works, I couldnu2019t say. It just would be nice. I had a smiley face after that request, it didn't come out right when I saved the post.
I still don't understand why .Refresh will update the data in the viewer but printing using the ActiveX Control will still print the saved data instead of refreshed data. Since I never used this in the prior version I don't know what it would of done or not, but it just doesn't seem right it shows one set of data, and prints another.
In addition, why the designer still saves data with the report when you state not to, I think may be a problem still.
Edited by: Thomas Johnson on Nov 21, 2008 12:26 PM

I have created a form in InDesign, exported to a pdf, created an editable form and saved. When I open the form and make changes and save, the reopen the changes are there. If try to email this form as an attachment after editing, the attachment is alway

I have created a form in InDesign, exported to a pdf, then created an editable form and saved. When I open the form and make changes and save, then reopen the changes are there. If try to email this form as an attachment after editing, the attachment is always minus the edits. ????

Hi chuck,
If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
Can you please send the form to me at [email protected] so that I can have a look.
Regards,
Rave

Saving data when reimporting at higher bitrate

Similar Messages

Maybe you are looking for