Saving to PDF changes margins

When saving to PDF in print settings, it cuts off the bottom lines. How do I change the margins in the PDF to stop this happening

Try setting the scale to 98% or thereabout. Or if your printer can print borderless on letter sized paper set it up for that before selecting Save to PDF.
OT

Similar Messages

  • Saved in PDF change to OCR?

    Having saved a paper in PDF is it possible to change the format to OCR
    or does the paper have to be scanned again in OCR?

    Yeah. It's a bit spendy but it does a lot more than just OCR.
    If you don't need any of the rest of the fluff, you can try Abbyy FineReader. It's a dedicated OCR application and in most peoples opinion does a better job at it than Acrobat.
    http://www.abbyy.com/
    Only $99 here in the states (they also offer a free trial period). It may differ depending on where you are  located.

  • How do you change the default save as directory when saving a PDF file to your hard drive?

    This is the on-line help instructions on this site:
    Downloading a PDF file to your hard drive
    You can download a PDF file to the hard drive from a web page's link. Downloading PDF files doesn't require the ActiveX plug-in file to be installed. (If you want to open and view the PDF file after downloading it, you must have Acrobat, Adobe Reader, or Acrobat Reader installed.)
    To download a PDF file from a link:
    1. Right-click the link to a PDF file, and then choose Save Target As from the pop-up menu.
    2. In the Save As dialog box, select a location on your hard drive, and then click Save.
    My issue:  I want to save several pdf files (from the Adobe Reader in my browser) one at a time and each time it defaults the save as directory to the desktop and I have to go looking for the directory I last saved a pdf file in.  I got lots of directories and I wish I could change the default setting for the save as directory.  Just a minor thing but irritating as other programs usually will allow you to switch the default save as directory to one of your choosing.

    There is not a way to set the default location from all the forums i searched in the last couple days.
    Russ

  • Problems with changing margins in pdf

    I am new to creating Adobe forms.  We are a law firm and uses ProLaw case management software.  I am starting to create Adobe fillable forms to be imported into ProLaw as fillable forms.  The problem I am having is I cannot change margins in the Adobe form.  I went to Print and Page Setup, but the area to change margins is grayed out, no matter what paper size I choose. 
    Is there a setting our IT people need to change in order for me to be able to change margins in the Adobe document?
    Thank you for any help.
    Karen Fonseca

    Hi Michael,
    Thanks so much for your reply.  I feel like a fish out of water.  I have gone to the crop tool, and it says to click and select area and then double click to crop.
    My document's left margin is now 1" and I need it at .5.  My right margin is fine at .5.   By cropping the "space" on the left, it will reduce the margin?
    Thanks again,
    Karen

  • I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only

    I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only sends the original form without text. Once I've changed a doc in Adobe, how can I save it so that I'm able to use it with added text and notes? Also, I'm using a new iPad.

    If you are using those apps or websites, they are likely viewing the PDF using iOS' built in PDF previewing, which will not show annotations and markup to the PDF. We have informed Apple of this issue, but do not have any insight into whether or when they will fix it.
    Regarding the qustion about importing pictures, Adobe Reader does not provide any capabilities to import pictures into a PDF. To do this, you'll need to use Acrobat, available on your desktop computer.

  • Saving a PDF file when printing is not supported. Instead, choose File Save.

    I am using Mountain Lion (10.8.2) and I was using Adobe Reader version 9. In the past, I've always been able to print to file using the File -> Print dialogue but all of a sudden it stopped working. I read somewhere that installing the latest version of Adobe Reader (version 11) would remove the old printer, so I did so. It took me about an hour on version 11 to even find the pdf print to file option, but I am getting the same message. For what it's worth, when I try print to file from Microsoft Word, I have no problem. I have no idea why things changed all of a sudden, but does anyone have any idea how I can get this working again?

    I checked with Adobe.  No luck. 
    Allow me to clarify my problem: 
    I have Adobe Reader XI. I also use a Mac--imac and a MacBook Pro.   My adobe was updated on 12/24.  Prior to that point, I could open my print dialogue box and there was a PDF tab on the bottom left.  In the drop down menu there were many choices, including but not limited to Open in PDF Preview, Print PDF, Save PDF, email PDF.  If I selected one page of 30 pages from a document saved in Adobe, I could extract just that one page and save it or email it, without having to send the entire document.   After the update, when I open a PDF file using ADOBE READER XI, and then open the print dialogue box, and follow those same steps, I get the message "Saving a PDF file when printing is not supported. Instead, choose File > Save."   My question is why is this feature now unavailable and is there a way to fix it? 
    The answer I got from Adobe was that Adobe never had this function, so it must have been via my print or preview programs..which are apple.  Does anyone have any thoughts?
    Thank you.
    https://forums.adobe.com/message/7124567 

  • Saving a pdf when dynamically build by a servlet

    Hi,
    How is it possible to initialize the "File name" field when saving a pdf content ?
    I'm generating reports in a pdf format with a servlet. This way, the servlet is called by a Url and the result is displayed directly in the browser.
    Now, if I click on the save button, the opened window suggest the url (http://....) as file name.
    Is it possible to send a default file name that is not trhe url ?

    I was interested in your question, since we have a similar application where I work, and every PDF always defaults to the name of the servlet when attempting to save it.
    I don't believe it would be possible to change that. The PDF viewer (Acrobat in my case) doesn't know or care whether the content is dynamically generated or a static .pdf file, it just knows that the browser went to a certain site and retrieved a file for it to open. So it appears to me that the decision of what default name to give the file is made at the browser/viewer level rather than by the servlet. I could be wrong, of course--I'd be glad to see any other suggestions.

  • Photoshop pdfs change canvas size when being viewed in Acrobat

    Hi, I am an issue when with saving photoshop pdfs from photoshop cc. They look good when they are in photoshop but when I save them to a pdf and then try to view them in acrobat the page size changes. Usually it defaults to 8.5 by 11 regardless of the size I set up in Photoshop. Does any one know why this might be? I am using Photoshop cc and Acrobat 11 pro. I've seen this same problem happen to several of my clients as well.

    How are you determining the page size in Acrobat? Please post a screenshot. If you have the word scaled up in your filename, you may have to do a view >> pixel aspect ratio >> square
    IN acrobat dod a Commadn R to show rulers, is your file 8.5" x 11". This actually sound like a view settings problem in acorn bat, btiu not sure

  • How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

    How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

    Hi Sara!
    Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
    Thanks for your quick answer.
    Best Regards
    Per-Olof Egli                                         Logga Egli C.I.S
    Managing Director
    Egli C.I.S. Consulting
    Lapphundsgränd 43
    SE-128 62 SKÖNDAL
    Sweden/Швеция
    Phone:         +46 708 23 03 53
    <http://www.eglicisconsulting.se/> www.eglicisconsulting.se
    <mailto:[email protected]> [email protected]
    Skype: eglipo
    Från: Sara.Forsberg 
    Skickat: den 10 september 2014 22:11
    Till: P-o Egli
    Ämne:  How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
    created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg>  n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

  • Gaps in-between  livepaint shapes when saving to PDF

    Im using CS6 and when saving to PDF my live paint objects have a slight gap inbetween the shapes in the live paint object. They do not appeare in the illustrator file or when saved as jpeg, png, etc only PDFs. I have been using Illustrator for a couple years now and this has not happened in previous versions I've worked with (CS3, 4, and 5)
    Thanks

    The thin lines around the rings are an artifact in pdf preview. Thi si the saem problem  http://helpx.adobe.com/indesign/kb/thin-white-dark-lines-stitching.html
    You may be able get rid of them by changing your acrobat settings such as turn off smooth line art.

  • Saving a PDF crops to artwork and not the artboard

    I have read a few posts on the web regarding this issue and was wondering if anybody here has a solution. 
    Since upgrading to CC, when saving our PDFs they now crop to the boundaries of the artwork and not to the artbord like in previous versions. I work in a PDF enviroment and we have a program that relies heavily on XMP data - one of which is the X and Y co-ordinates of the artwork in relation to the top-left corner of the artboard, however now, when artwork goes outside of the artboard or doesn't fill the artboard, the resulting PDF crops to the artwork thus changing the X and Y co-ordinates of where artwork is positioned on the page.
    Is this a bug that is likely to be fixed or has a feature changed that I don't know about.

    This is in Illustrator CC Version 17. It is fine when you open them back in Illustrator.  I have also noticed that from Illustrator if you do a 'Save As', select PDF, then select one of the PDF presets (I use 'Press Quality) the resulting PDF when opened in Reader displays how I want it, with the artwork as it was positioned on the Illustrator artboard (not cropped). If I then open in Illustrator again, make a change to the artwork, and select 'Save' (not 'Save As') when opened back in Reader the file is cropped again.

  • Hyperlink in PDF changed

    the Rev is adobe reader x 10.1.4,
    in the company internal website,after I downloaded some  PDF files ,the hyperlinks indise the files are all pointed to my PC disk, why not the website address like before?

    the process was:
    1.At the first times,I open the PDF files in the company websites online,
    it was ok, what the hyperlink pointed was another website address which
    located a PDF file.
    2.After I saved some PDF file which I opened online to my local disk ,
    someday, when I wanted to open a hyperlink from a PDF file online ,it can't
    be realized ,like what I say at the beginning.
    my question is :
    why it changed,normally,the PDF embeded in the website can't be changed
    with anything.
    why did the hyperlink change,when I opened the PDF file ?
    2013/3/19 Bernd Alheit <[email protected]>
       Re: hyperlink in PDF changed created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit>in
    Adobe Reader - View the full discussion<http://forums.adobe.com/message/5160026#5160026

  • Signature drop down menu greyed out. I believe it is because I saved the pdf document after placing a signature.  I'm using Adobe Acrobat Pro 9

    signature drop down menu greyed out. I believe it is because I saved the pdf document after placing a signature.  I'm using Adobe Acrobat Pro 9

    Do you mean the drop-down list that shows up when you right-click on the signature (in the Signature Panel or signature field)?
    I do not think that just saving a PDF with no changes would result in that unless you somehow flattened the PDF.
    Can you see the signature in the Signature Panel? Can you expand ([+] at left) the signature? Does the Signature Panel provide info for this signature? Is the signature validated? If "yes" then is the signature status Valid?
    It could be that when you saved the file you somehow flattened the signature, so that now you have only signature appearance in the PDF but not a real signature field which contains all signature properties. If the Signature Panel does not contain your signature (enpty if your signature was the only one) then this is the most likely cause.

  • Incorrectly coloured text when saving to .PDF using Photoshop CS4

    I am using Photoshop CS4 on Windows 7, and have designed my own business card.
    When saving to .PDF to send to printers I am finding that a small section of text is saving with a white section to it, for example out of the 3 lines of text on the card the bottom left hand corner of the & sign I have in the design is coming out white, the rest of the text is a golden colour.
    I have tried searching on this forum and on google but can't seem to find anyone with my actual problem so unsure where to go.
    Any help much appreciated.
    Thanks

    Mylenium wrote:
    Well, you could change the native text color instead of using layer styles, could you not?
    Mylenium
    Or make the Type and Hyphen layers into a single Smart Object and clip a yellow layer to it.

  • Response data not saved in PDF

    Dear All,
    I created an interactive form with a web service. I filled in the form and sent all the datas in SAP through the web service.
    All worked properly except that I have a return message from SAP. This message is binded in my form as response field.
    I saw my message in the form when the WS is finished but I saved the PDF on my PC.
    When I look at my PDF later, the return message is disappeared, it is not saved in my PDF as all the other fields.
    Thanks to help me
    Kind regards
    Véronique.

    Dear all,
    Can someone help me ?
    All the other data are saved in the document. But I think that it is because the return message is not keyed but is only a answer in the web service, the PDF can't save it ?
    If I change the field (add some character after the return value from SAP) and I save, the value is kept.
    Could someone tell me how to do ?
    My button is an Execute one with the data connection on my web service.
    If I re-merge data, all the fields become empty except the response return message. Even in this case, the message is not saved in the PDF.
    It is important !
    Thanks
    Kind regards
    Véronique

Maybe you are looking for