Saving XML to .sesx...will not open in CS6

Im trying to convert my legacy sessions into Audition CS6 sessions. Im successful at importing an XML created in Audition 3, but when i save it in auditionCS6 and try to re open it, i get an error message...saying the file is corrupt or unsupported.

Let me see if I have this right:-
If you use ses2sesx the converted sesx file loads up fine but after you save in CS6 and try to open it again it fails to open?
Can you do the ses2sesx conversion again and make a copy of the resulting sesx file
Open the original conversion (not the copy you have made) and then save the sesx in CS6
Try and open this file again in CS6
If it fails to load then could you send me both sesx files please?
This doesn't sound like an ses2sesx issue but I would like to see what is happening to the file.
You should also send both to [email protected] so the devs can check it out as well.
I'm thinking it could be something like a language setting (an old chestnut we get down under is when users set their country to "Austria" instead of "Australia" - you can't imagine how much fun we get looking for that one) 

Similar Messages

  • Some images saved in Photoshop CS will not open in Photoshop 6

    We have confirmed that some files saved from Photoshop CS will not open in Photoshop 6. This is due to a bug in Photoshop 6, not in CS.
    These files open correctly in Photoshop 3, 4, 5, 5.5, 7 and CS on both platforms.
    The solution is to upgrade the copies of Photoshop 6 to Photoshop CS.

    Hi sig,
    I actually did try reinstally Photoshop - even reinstalled my operating system. I looked for the file "Adobe Unit Types" and see that it is indeed there in the ScriptingAdditions folder. But I still cannot open the tif files.
    I should also mention all my tif files have the .tif extension on them (in case anyone suggests that's the issue.)
    And, this problem is the same with Illustrator CS .ai files as well.
    Any other ideas?
    Thanks.

  • Cr2 files will not open in cs6

    I am running os10.6.8 and recently upgraged to cs6 from cs5. I have checked for software updates and my version is current. when I (attempt) to view in bridge or try and open cr2 files in the latest photoshop it will not allow. I can only see the cr2 icon but no image. HOWEVER -  I can view/open the files in my previous photoshop version (5) with no problem. I have seen reference to 'patches' without explanation as to how/when those are needed or is this the same as a latest software update? if so, patches sounds alot like a jankey duct tape and twine solution - just friken use the word SOFTWARE UPDATE - I think that is pretty clear.
    Secondary question - I did a 30 minute search on this discussion board and found nothing. I don't understand how that can be, as I am sure this is a common problem.
    stanks!
    johnyboy

    http://labs.adobe.com/downloads/cameraraw7-4.html
    FYI, Camera Raw versions and supported camera makes/models are listed here:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The Canon 5D MkIII was first supported in Camera Raw 4.1 *.
    * My error (as correctly pointed out by Noel in post #6): Camera Raw 7.1 (Lightroom 4.1)
    (@Noel: no confusion on the 5D Mk III (it's my dream camera, one day) - just quoted the wrong column on the supported cameras page :-)

  • Business Catalyst will not open in CS6

    I am just about frustrated with trying to get BC opened up in CS6. I have a x64 Windows 8 operating system and have CS6 Dreamweaver installed. When it opens, I click under "Create New" Business Catalyst Site.... Once I do that a dialogue box opens up that says Business Catalyst on the title bar but the box is white and then disappears. This just does that over and over when I click on it. On the right side where it has the Business Catalyst tab it says "Get Started" and that button does absolutely nothing. Everything else works when I click it but anything related to BC will not work at all. Please help!

    Hi,
    Humm...we'll need to investigate this further however we'll need you to submit a case with the following details so we can attempt to replicate your issue. 
    Please provide the following in your case to us.
    - login details
    - exact steps
    - screen cast or video
    You can log a ticket via your site admin under "help & support". 
    Or you can access directly here -> http://helpx.adobe.com/contact.html
    Kind regards,
    -Sidney

  • Bridge will not open in CS6

    I'm using win7 with plenty of memory. I had PS CS and upgraded to a complete new version of cs6 extended. I loaded it and the ps program works fine. However the Bridge program will not start. I've tried both programs even from the exe file and nothing. It will not run. Any help out there?

    Bridge General Discussion

  • Saved Logic 9 projects will not open.

    Hi all, wondering how many other people are running into this issue.  Basically ever since I upgraded to Lion, none of the projects I save in Logic Pro 9 (updated to 9.1.6) will open when I double click on them.  Logic will launch just fine to my default template, but it tells me that the project I wanted to access cannot be open.  If I leave Logic open, I can open the correct project from the file menu, as well as by right clicking on the dock icon and selecting it. 
    But no luck just opening them when Logic is not running first.  Anyone else seeing this?

    Hi
    Apple seem to know about this issue, but you say that you are running the latest version ?!
    http://support.apple.com/kb/TS2881
    CCT

  • *.Indd file made in CS3 will not open in CS6, ideas?

    There are many files made in CS# but this one happens to not pen up in CS6.
    The file has some embedded jpg files
    file size is @ 300mb

    I have someone remotely trying to open the file in CS3 and it opens!!!!
    he is trying to resave the file
    will that help?

  • Files/images will not "open with" CS6?

    Just in the last two or three weeks, I cannot right click and open images/documents with any of my CS6 products anymore. I have 2 folders:  Program Files and Program Files (x86) on my Local Disk. Program Files does not have all the CS6 folders. Program Files (x86) DOES have all the CS6 folders PLUS several CS5 and 5.1 folders.
    I would appreciate some suggestions.
    Thanks,
    Jody

    Run the Creative Suite Cleaner Tool, reinstall.
    Mylenium

  • Adobe Bridge will not open (with CS6 Extended)

    I Installed a student version of CS6 Extended a couple weeks ago and I have used Bridge with it a few times but all of a sudden it wont open. Photoshop opens perfect but bridge doesnt even come up with any error messages...just nothing. Can any one help me? Please? Thank you

    Try resetting preferences.  Hold down Crtl key (option on mac) and start Bridge.  Should get a reset window.

  • Photoshop CS2 will not open to double click in Snow Lepard

    Since loading Snow Leopard I have been unable to open Photoshop files with a double click. Double clicking .psd file opens PS with the message "Could not complete your request because Photoshop does not recognize this type of file." Right click "open with" gets the same result. I CAN open files through the file menu in PS. But, files opened via the file menu and saved as... will not open with a double click.
    The "Open with" in the file info window reads "Adobe Photoshop CS2". Even forcing it to open in Preview and then back to PS CS2, sort of like hitting it with a hammer, does not improve the situation.
    CS2 on and year old dual quad.
    Before you knee jerk a "CS2, what did you expect..." CS2 seems to work fine once open. And I have access to another brand new iMac 24" with CS2 and Snow Leopard that does not have this problem, files open with a double click.
    On my troubled machine the thousands of files in question opened yesterday, pre Snow Leopard. I have found a few PS files that are several years old that do open to a double click.
    Thoughts?

    In a partial answer to my own question...
    I have discovered that the Adobe CS2 files (as well as Illustrator CS2, Microsoft Office X, Silo, etc.) will open with a double click in some cases.
    Files on my main hard drive (Mac pro dual quad with four one terabyte hard drives, Snow Leopard 10.6.1) is a RAID made up of two of the internal terabyte hard drives will not open with a double clip. (They do open via the file menu in the given program).
    But files on non-RAID drives open with a double click as expected.
    It appears that the RAID drive (Apple software RAID) is the culprit.
    It is likely that a simple fix from Apple in the operating system to correct the opening of files with a double click from an Apple sotware RAID drive would solve the problem as the various programs all work fine otherwise with Snow Leopard 10.6.1.

  • A Pages file will not open due to index.xml not found, what is up with that?

    I recently saved a file on Pages 5.5.2. on my IMac hard drive.  Now I find that on attempting to open it the file will not open due to index.xml not found.  Hoe do I correct this?

    I have this issue, as well - although perhaps in a different content.  When I try to open a file I created in the previous version of Pages, I will frequently (but not always), received the "index.xml not found" message.  I am very concerned that I may lose access to some of these files.  The old Pages icon is still on my dashboard, although I've downloaded the new Pages (that icon only appears when I open a new document).  I thought I needed to upgrade the old documents to the new Pages, but this didn't work.  Does anyone have any ideas?  And, I'm not a techie - so you'll need to break it down for me. 

  • Pages will not open a downloaded .pages document from iCloud because index.xml file not found?

    New to using iCloud.  I created a large pages document on Mac Air and saved it to my iCloud account.  Found it at home on desktop Mac and downloaded it.  No problem.  However, it will not open due to the index.xml file not being found.  What should I do to open this document?  I've tried several things and no luck yet.  Thanks for any tips!  :-)

    Options posted here: The required index.xml file is missing.
    William Farrar posted:
    Try this. It worked for me:
    1. Single click on the document. This will "highlight" the document icon, but not invoke the error message.
    2. Click on "File" in the menu.
    3. Scroll down to "Open With".
    4. One of my choices in the "Open With" selection is Pages (default) (5.0.1)
    5. Click on that choice and the document should open.
    In my "Open WIth" selection there is also a Pages (4.0.4), but that didn't work for me.
    Now, here is a caveat. If before you open your document you instead first click on an open Internet window, then the "Open With" selection disappears from the File menu. In that case just single click again on the document icon again and the "Open With" selection returns.
    fruhulda posted:
    Try this:
      1. Make a duplicate of the file (cmd D), just to be safe
      2. Select .pages on the copy and change to .zip
      3. When the System asks if you really want to do this, click Use .zip
      4. Double click the new .zip file
      5. It will now appear as a folder with no extension
      6. Append .pages to the end of the folder name
      7. Again click on Use .pages
      8. Double click on this file to open it in Pages.
    What you have done is extracted all the Pages resources from the .pages "package" and reconstructed it.
    or
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=308

  • Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".

    this was supplied by Ann Shelbourne.
    Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".
    These files will often open in Photoshop 7.0.1 or in CS1 but not in CS2.
    The trouble may be caused by bad dates in the EXIF data and can originate from an incorrectly-programmed digital camera; or from a scan that was created after after Jan1 of this year (because of a known bug in some scanner software).
    If someone runs into the "Could not complete your request because of a program error" problem, and does not have CS1, try opening the Tiff in TextEdit.
    The EXIF data is right at the top. Check the EXIF data for bad creation dates and change any incorrect ones there.
    Save and close; and then the file will probably open in CS2 without a murmur.

    > If iPhoto causes problems why not open the images from the Finder?
    I get the error if I open a file from within iPhoto using "OPen in external editor" and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
    I get the error if I do "Show file" in iPhoto to see the file in the Finder. Then, if I double-click and it opens in PS, and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
    > And with »save it anywhere« You indicate that You use the Save As-command?
    Right.

  • Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
    The platforms don't matter, but you still need file transfer that doesn't corrupt files...

  • Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

    Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?

    iMac G4, Mac OS X (10.4.9)
    Make sure you have the latest Adobe Reader installed for your OS.
    http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
    Did you try using Preview. If you control click on the PDF on your desktop you can use the "open with" option.

Maybe you are looking for

  • Cannot copy and paste plot from LabVIEW to PPT

    I am plotting a simple Y vs X curve using XY Graph and 2D Error Bar plot. When I highlight the two plots, and do CTRL-C, and go to MS PowerPoint and do a CTRL-V, only the XY Graph is pasted. My 2D Error Bar plot is NOT pasted, but I do see the label

  • Unable to create the sales doc with ref to quotation

    Hi, I am unable to create a sales order with ref to quotation, messege is "Create sales document" not allowed (User Status MKT, object VB0006000017000000)". how please advice me chandu

  • 9.0.3 DB Navigator Issues on 3rd Party JDBC

    A new problem in 9.0.3: under System Navigator, Connections, Database Connections, we are no longer able to drill-down to schema objects (such as tables and views) for the 3rd party JDBC connection that we have been using successfully in 9.0.2. I hav

  • Can I connect with more than one iTunes acct

    Can I connect with more than one iTunes acct

  • Guestbook in Adobe Muse website

    Hi ! My customer ask me to add a guestbook in his website made with Muse. How could I do ? Every answer I have found give me some PhP code. Thanks for your answer.