SB Audigy Platinum Drive (Face Plate) Not Respond

Thats about it.... the MIC IN 2 / LINE IN 2 and Headphone jacks are not working.
They no longer even show up in the Volume Control Panel. I just reinstalled the
drivers, but still nothing..... HELP !!!
The sound works perfect otherwise.... it just front panel.

Obviously the first thing to check is the connections, as that's probably the problem. Make sure you're using the IDE-ish cable that CAME WITH the unit for the connection to/from the faceplate AD-EXT port, plus make sure you have it plugged into the power supply. If I remember correctly it needs a floppy dri've power supply. How many cables do you have coming from the dri've? Do you have a ZS Platinum?

Similar Messages

  • Audigy Platinum driv

    Hi all, and a big hello from a beginner in this forum!
    I'm going to download new drivers for my old Audigy Platinum (200), the file name is: sabx_webup_lb_2_08_0004.
    My question is: does it works good?
    One year ago I downloaded a driver from this site and my XP SP2 crashed!!
    Does it worth, anyway? I have no problems with my sound card and I don't know if it is really necessary to update the driver...
    Maybe anyone installed the new driver and had problems?
    Thank you.

    Redman wrote:
    Hi all, and a big hello from a beginner in this forum!
    I'm going to download new drivers for my old Audigy Platinum (200), the file name is: sabx_webup_lb_2_08_0004.
    My question is: does it works good?
    One year ago I downloaded a driver from this site and my XP SP2 crashed!!
    Does it worth, anyway? I have no problems with my sound card and I don't know if it is really necessary to update the driver...
    Maybe anyone installed the new driver and had problems?
    Thank you.
    Drivers v. 02.08.0004 works perfectly. Just install the driver update by following the instructions found behind link below.
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=4892
    jutapaMessage Edited by jutapa on 05-4-2006 09:44 PM

  • Audigy Platinum FR/FL speakers not working

    I'm running the beta driver 2.8. on Windows 7 Ult x64 using a 5. set of Altec Lansing 25 speakers. These work great with my onboard sound on another pc but I can't get the Front Right/Left speakers to work with the Audigy. I get RR/RL,Sub & Center. No matter which set of jacks I plug into I can't get the FR/FL speakers to work. I've gone through the CL Audio Console to configure the speakers and it's set to 5.. Windows is configured for 5. sound.
    Specs:?
    Windows 7 Ult x64
    Tyan Thunder K8HM
    ?Dual AMD Opteron 850 dual core
    4G Ram
    320G SATA HDD
    Altec Lansing 25 5. speakers

    it sounds to me like you have your matrix button pushed in. This button will try to make sound come out of all speakers. If it is depressed and you are testing a five to 1 sound, it will not play through the center channel. I have an old set of logitech speakers and with the matrix button pressed in, I get no center channel because it is trying to upsample stereo to all five speakers. Try that please.
    Thanks
    jmacguire
    Cheers,
    jmacguire

  • Main button on face panel not responding when pushed. Any suggestions?

    The main button on the front of my Iphone4 only works about 30% of the time.  Restarting the phone does not help.  I can push and push and it won't exit the app I am in. 
    Any suggestions?

    If your device still in warranty, you may ask support for a defective Home button.

  • Audigy 2 zs platinum front drive bay mic2 not worki

    hey all I finally got my AD_EXT wire to make my audigy 2 card work with the front dri've bay but the problem now is I am in vista ultimate 32bit, all drivers installed right, all cables plugged in but the mic2 is not working....... I'm using a dynamic mic Samson Q7 microphone with the XLR cable. This microphone I heard does not need a preamp so it should powered up.
    I called creative and the guy supposed to send me a article to read to fix it but so far no luck in my email about it.
    anyone staff members here know the link to that article?

    Maybe this will help out:? Under Control Panel ---> Sounds and Audio Devices --> Hardware I have the following list. CD-RW SOHR-5239SDVD_RW ND-3550AMPU-40 Compatible MIDI DeviceUnsupported Standard Game Port - Location: on PCI BusCreative SB Audigy 2 ZS (WDM) - Location PCI Slot 2 (PCI bus 5, Device 7, Funtion 0)Creative Game Port - Location: PCI Slot 2 (PCI bus 5, device 7, function )Audio CodecsLegacy Audio DriversLegacy Video Capture DevicesVideo Codecs?All of them are listed as "Working Properly". The MPU-40, the unsupported game port, creative SB Audigy 2 ZS, Audio codecs, legacy Audio Drivers, and the Creative Game port were all uninstalled prior to my latest re-installation. When the windows install wizard popped up, I cancelled, so everything on that list was installed using the latest creative ZS Platinum driver for x64.

  • Black Face Plate for Audigy Platinum

    Hi. I searched this topic and it didn't look good, but wanted to further verify if anyone has ever found exhangable face plates for Audigy Platinum. I'm switching to a black Lian Li case and my white face plate looks kinda rediculous! Thanks.

    You may laugh, but you can detach the plate, and spray paint it very quickly. I did this with my first i/o bay and finished it off with a nice glossy lacquer. It looks great to this day!? I later did the same with an Audigy bay.

  • Audigy Drive on Audigy Platinum Not Recogni

    I have a custom built (read, I built it myself) AMD 2200 XP with GB Ram and a 420 W Power Supply. It has a Soyo Dragon KT333 Ultimate Platinum motherboard. I have had it up and running for about 2 years and the Audigy Platinum Sound Card works beautifully. However, I have NEVER been able to get Windows XP Pro to recognize the Audigy Dri've that goes in the 5.25 in. Dri've Bay. It hasn't been a big deal, because my computer has been out of it's cubby hole for the last two years for various other reasons. However, I now want to put it where it belongs and would like to get it working before I put it away. The cables are all hooked up right. I have tried fi've different connections from my power supply and still can't get any indication of power being supplied to it or get XP Pro to see it. Any help would be greatly appreciated.
    Russ

    Falcondfw,
    Since you have tried multiple power adaptors one thing to check would be to see if the Red Light on the optical out (after removing the cover that is) ever comes on. If it doesn't then it is most likely a hardware problem and you will want to have the dri've repaired. This can be arranged by contacting Technical Support, here is the page that has their contact information:
    http://us.creative.com/support/custsup
    Jeremy

  • Audigy Platinum Ex Windows 7 SPDIF IN not working

    Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
    In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
    If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

    Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
    Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
    What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

  • Hard drive not recognized​, Lenovo Care button not responding

    I have a Lenovo 3000 N100 laptop.   Type 0768
    When powered up, it will not boot to the operating system.  I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button.  It will not respond to the Lenovo Care button.  Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens.  Pressing F1 changes the message to "Please Wait...", but again, nothing ever happens. 
    I followed the troubleshooting guide which said to try reseating the hard drive, but nothing changed.
    Is it dead?

    I had the same exact problem as b4blackhad
    "I have a Lenovo 3000 N100 laptop.   Type 0768
     When powered up, it will not boot to the operating system.  I just have a white screen with "lenovo" and "To interrupt normal startup, press Lenovo Care button.  It will not respond to the Lenovo Care button.  Pushing F12 changes the message to "Press [F1] for SETUP, Entering boot device selection menu..." but nothing else happens.  Pressing F1 changes the message to "Please Wait...", but again, nothing  happens. 
    Word for Word same problem I faced.
    I turned on my laptop while continuously pressing the  "PrtSc" button upper right corner and it started up as normal!
    I am not all that PC. Smart, very average. I saw solutions saying to press F1 TO F12 tried them all and nothing worked.
     I saw "Remove hard drive" or "Replace Memory" OMG what am I gonna do now!!! Took a chance with "PrtSc" now I'm sooooooooooooo relieved, thanks Lenovo Community for all the tips that put me in the right direction : )

  • External Hard Drive is not responding

    I started to notice this in the last couple days that my external hard drive is not responding to my imac. I could browse the hard drive, but I would not be able to open any file. And, any application that tries to open file from the drive would fail or would result in "no response".
    The only way I could fix the problem is by unplugging the drive completely and then re-connecting it back.
    My external HD is a 1TB western digital.
    Is this the sign of my external HD failing?
    Thanks!

    How full is the hard drive?
    Have you used Disk Utility to try and repair the hard drive?

  • MacBook Pro 2010: Flashing folder w/? on not responding to startup keys & I'm trying to install a new hard drive, can anyone help?

    MacBook Pro 2010: Flashing folder w/? on not responding to startup keys & I'm trying to install a new hard drive, can anyone help?

    Thanks. It started up com that disk but when I went to install it had an error message (didn't get to write out what it said). So I attempted to restore from time machine but it said there was no space, even though it's a new (replacement under warranty) HGST 1TB HD,  so I did what  I think was right and tried to partition the disk but it now says 'Partition faild...POSIX report...cannot allocate memory'.  im not sure what to do, and I'm trying to remember how the previous hd was installed and formatted for use but that was over a year ago now. Should have erased the hd first or something?

  • Today I get issues with thte device. When I in a phone call, the screen don't auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently.

    today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?

    Same issue already several weeks.
    And we are not alone:
    http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
    At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
    ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
    I already contacted BB Help at Twitter. Answer:
    Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
    I did replay:
    You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
    This my replay was 22 of march. No more answer from BB.
    I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
    What I already done:
    For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    This
    For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
    Doesn't help
    And this:
    For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
    No result.
    After install all of them phone wants to update to 10.2.1.2102 by air.
    BBVE in all versions sais: Can not obtain data from sensors.
    Dear BB support, please, can you explain, how to resolve this issue?

  • Trying to move aperture library from USB external drive to FW 800 external drive.i can see the projects but no thumbnails. Error application not responding. Verified permissions before started. It's been 3hours. Recommendations please

    I have consolidated iPhoto into aperture 3.2.2  and now have both aperture and iPhoto put consolidated library on 2.0 USB external drive. Have been removing duplicate photos from 23,000 down to 15,000. Problem in trying to close aperture and now tried to move library from 2.0 USB to 800FW and can see projects but no thumbnails. Aperture error now reads not responding. Can I repair library on 2.0 at this point? 

    Sharon,
    did you do anything else besides copying your library to a fire wire drive after your last post                                                                            Aperture not responding                     ?
    Since that library probalbly already needed fixing, I'd recommend to force quit Aperture and use the "First Aid" to repair your Library.
    Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
    Regards
    Léonie

  • External optical drive (HP) not responding to iDVD

    My new (HP) external optical drive does not respond to iDVD. When I go to click burn it is darkened. In my system profiler it has -R and -RW listed, but under burn support it says "Yes (unsupported)". The computer responded when I insterted a blank DVD. What does this mean and how do I make it work?
    PowerBookG4   Mac OS X (10.4.8)   Combo drive, 768 MB memory, 1.33 processor

    Hi and welcome!
    iDVD 4 did not natively support and external burner. But, you should use DVD-R disks.
    You will need to look at these:
    BURN DVDS TO AN EXTERNAL BURNER OR A DISK IMAGE WITH iDVD:
    http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0015-burn_idvdother.html
    or
    Patchburn
    http://www.patchburn.de/
    Sue

  • Not responding when network drives present

    Hi,
    We are experiencing an issue which more and more people in the company reports. This is regarding mapped drives and computers which are offline.
    Our setup:
    We are mapping network drives through a GPO, using Create and Reconnect is not ticket on.
    Clients with the issue is running Windows 8.1 and Windows 8.1 Update 1
    The issue:
    When the client goes offline and the network drives aren't connected anymore. The save as function in all applications (Word, Excel, PowerPoint, Notepad etc.) stops responding. The drives are still visible under This PC, but the file Explorer window will
    also go into not responding if trying to disconnect or view properties on the Network drive.
    We have tried:
    Change GPO settings = No change
    Use persistant = No change
    Use powershell to map drives instead = No change
    How did we verify the issue is related to Network drives:
    We tried to disconnect the drives first and then go offline and then the save as function worked just fine in all applications.
    We are desperate for some assistance on this issue and disconnecting the drives before going offline will Work as a temporary solution, but is definitely not a great solution in any way possible.

    Hi,
    Based on my understanding, this should be related to the TCP retransmit mechanism, in short, TCP would
     start a retransmission timer when each outbound segment is handed down to IP. If no acknowledgment has been received for the data in a given segment before the timer expires, the segment is retransmitted.
    There are two values control the retransmit time:
    TcpInitialRTT: Defines what the initial time-out settings are for new connections. This number in seconds is doubled each time it retransmits before timing a connection out. Defaults to 3.
    TcpMaxDataRetransmissions: Determines how many times TCP retransmits an unacknowledged data segment on an existing connection. TCP retransmits data segments until they are acknowledged or until this value expires. Defaults to 5.
    In general, the first retransmission was sent after about 3 seconds. The timer was then doubled for each of the retransmissions that followed. After the fifth retransmission, the timer was once again doubled. If no acknowledgment was received before it expired,
    the connection was aborted.
    Alex Zhao
    TechNet Community Support

Maybe you are looking for