SB Live 24bit external & openS

Hi. Can you help me to setup this device with suse? Alsa is already installed but suse doesn't recognize the device.
Thanks

Comparing to PLD, loaded modules, sound settings everything seems to by identical. Whatsmore, until I've upgraded kernel (one of the 2.6.25 edition) to the newest available in repo, surround worked on Arch flawelessly.

Similar Messages

SB Live 24Bit External: Reproducible System Freeze after installing Windows Upda

I have a SB Li've! 24Bit External and am quite content with it. However, my Windows Update has recently installed the following updates:
- Cumulati've Security Update for IE, KB9282
- Cumulati've Security update for OE, KB9567
- Tool for Spyware Removal, KB890830
- Security Update for Windows XP, KB90853
- Security Update for Windows XP, KB9562
I suspect one of the last two ones to be at fault. Afterwards, my computer froze completely on the Windows startup screen whenever the SB came up. I could verify that it was the SB by removing the USB cable (which solved the issue) and plugging in again later to the running system (which brough the freeze again).
A was able to get a running system again by using the System Recovery, but I'd *really* like to install those updates (. to be a little more safe and 2. because the Windows Update nagging me about those updates is really annoying).

This has got to be the craziest IRQ table that I have ever seen. Windows will not let me change any of the settings. It doesn't seem kocher, and I am pretty knowlegible from other systems I have set up, but not this one. I have been keeping a few charts to see if anything changes, and these have changed since this morning, though nothing else has been installed. I know they shouldn't share as they do, but it won't let me have control over these. Am I am doing something drastically wrong. On USB is Epson 760, Logi cordless opticle mouse, and MS Internet KB with combo PS2 / USB 2 port hub. I have the mouse plugged into KB. HERE GOES:
IRQ 0 : Sys timer
IRQ 1 : Keyboard
IRQ 2 : Prog Interupt Controller
IRQ 3 : Com 2 (yet I have disabled in bios)
IRQ 4 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 4 : STD OPEN HCI USB HOST CONTROLLER
IRQ 5 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 5 : NVIDIA USB 2.0 ENHANCED USB CONTROLLER
IRQ 6 : FLOPPY
IRQ 7 : EPSON PRINTER PORT LPT1 (MY HP540 IS HERE)
IRQ 8 : SYS CMOS / RTC
IRQ 9 : SCI IRQ USED BY ACPI BIOS
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 10 : NVIDIA NFORCE MCP NETWORK CONTROLLER
IRQ 10 : NVIDIA NFORCE PCI SYSTEM MANAGEMENT
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 11 : SB LIVE
IRQ 11 : STD OPEN HCI USB HOST CONTROLLER
IRQ 12 : ACPI IRQ HOLDER FOR PCI IRQ STEERING
IRQ 12 : NVIDIA GF4 INTEGRATED GRAPHICS GPU
IRQ 13 : NUMERIC PROCESSOR
IRQ 14 : STD DUAL PCI IDE CONTROLLER
IRQ 14 : PRIMARY IDE CONTROLLER (SING FIFO)
IRQ 15 : STD DUAL PCI IDE CONTROLLER
IRQ 15 : SECONDARY IDE CONTROLLER (SING FIFO)

Sound Blaster Live 24bit External - No B

I am hoping that someone can help me here. I am running Windows Vista Ultimate and have my PC setup purely as a Media Center machine. It has an onboard Intel 5. Sound Card that was producing average sound, but works 00%?I have since installed my Li've 24bit External, I first ran the CD and then realised that it was not Vista software so I downloaded the updated drivers and software. First I removed the old software and then installed the newer version. Now everything seems to work and when I test all the speakers via the?drivers / control panel?they all work - including the sub. When playing anything via Media Center or Media player, I get no bass what so ever. - I have even tried 5. DTS DVDs?I have subsequently plugged the speakers back into the onboard card and the sub works. Any suggestions?Thanks in advance.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Sound Blaster Live 24bit External (5.1) Mic-In / Line-In prob

Hey, here's my setup:
Virtual DJ Console Edition (3.4. updated)
Hercules MP3 Console
Creative Sound Blaster Li've 24bit external (5. card, using it as a 4. to get FRONT out to speakers and REAR as headphone queue)
I need to broadcast using Shoutcast (the VirtualDJ internal broadcasting plugin wont allow to set up full details that SHOUTcast plugin for Winamp allows you to fill in.... i.e. Yellow pages etc etc)
The problem is basically that when I'm using SHOUTcast for Winamp, it streams both my FRONT and REAR outputs, can't seem to choose for it to stream only FRONT...
Now, I know I can send the FRONT to Line-in (and use a stereo Y splitter to get the sound also to my speakers), but then it seems my Sound Blaster li've disables my Mic-In... seems that it has shared Line-In and Mic-In even though they are separate holes in the box....
so basically wondering if anyones got any suggestions as to how to be able to Broadcast only the FRONT output and use the Microphone... now it seems its either I can't use the Microphone when doing a radio show... or alternati'vely I can't use my headphone queue...
I don't understand why would the card have a separate Line-In and Mic-In, but you can't use the Mic-In if you have something hooked in the Line-In? Could there be some software or driver update I could get to be able to do this? Or am I just having forced to buy something like an M-Audio card thats exactly the same, but doesnt share the Mic and Line-ins but lets you use both at the same time?
Thanks for any suggestions! They are most welcome!

at drivers?
IF you mean those third part yASIO drivers they limit to 6 bit recording whic hisn't an issue wuth Acid pro, it's the bandwith and asio offset. DO you ahve a link?

Sound Blaster Live 24bit External

Would a Sound Blaster Li've 24bit External work as a soundcard for my Logitech X-530 5. system? I'm looking for something to upgrade my crappy intergrated soundcard.

Yes, it will work. It'll wind up setting your USB ports to 6 bit by default, because it's going to be taking alot out of them, but it'll give you some beefy surround sound none the less. On the down side of this external card though, it's giving me a ton of **bleep** about ventrilo and fra
ps.
:/About to make another topic pretaining to that ina few though.

Live 24bit external CMSS - Vi

I installed? the new drivers for my li've 24bit external sound card but can't find a way to hear 5. sound in wmp. All i hear is 2. sound. I'm wondering if CMSS is working as it should. Can anyone help? Maybe my settings are wrong... Thanks!

not sure if I get this right. are you saying there is no 5. sound for me on Vista with this? confused. I messed around with every setting, but as stated by [color="#000000"]Mathjkt I can only hear 2 speakers. when I run the creative speaker config, it correctly assigns the corresponding direction to each speaker, all 5. but none of my players work in 5. (wmp, winamp, mediamonkey). this is probably just a little oversight on my part I hope. thanksnever mind, just read the main driver post [url="http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=672">here[/url]
Message Edited by hilmar on 02-5-200708:38 PM

Can Sound Blaster live 24bits external work at usb2

hello!
my pc work with usb2.0 and i would like to know to now if usb. connection of sound blaster li've 24bits, can work at 2.0 or, if there are any update that make it work at 2.0?
i would appreciate a answer.
thank you.Message Edited by jhonyy00 on 2--2005 09:02 AM

i appreciate the answer <SPAN class=title_big>Leekay07 , but even so, i?m making some music with FL STUDIO ; and plug-ins like AMPLITUBE; DSOUND and also recording guitar in real time with some effects.
In favour of quality sound and protection to the speakers it is not necessary a fast connection than usb .
does not usb . connection lose speed to transfer data for the purpose i describe, comparing to PCI card?
My pc has AMD athlon processor at 2.8Ghz and 768Mb of RAM and logitech X-530 5. speakers.
Thank you very mutch.Message Edited by jhonyy00 on 2-4-2005 09:3 AM

Connecting a mixer to sound blaster: live 24bit externa

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

Iv got some dj decks, and wanted to record my mixes to my laptop, so i saw the external sound blaster li've and thought that would do the trick. But it turns out that it is alot more complicated than?i thought. First of all, it took me ato install everythnig without something going wrong, but all the driver (for vista) seem to be ok now. Once installed, i connected a 3.5mm jack into the line in, on the soundblaster, and conncected the other end to my mixer. That all done, i went onto the recording programme that you get with the sb, but here is where it goes wrong the message 'there is no audio device on the system, the application will now close' comes up. Of course this stops me getting onto any of the programmes, and stops me from recording. After this i checked on control panel/device manager, and it said that everything was working correctly, but on another page it says 'cannot find hardware connected' although the blue power light is on. I have now run out of ideas of what to do, so any help would be great.

SB Live 24bit external problems with windows 7 beta driver

Hi, I have a problem with my soundcard with the windows 7 beta driver. An unwanted sound come out when I'm doing something like chatting with Yahoo Messenger or buffering Youtube. I don't know what makes it like that, can you guys help me out, please
Thank you

Maybe you could start by donating something
I'm giving you something Creative would never do, so I think I deserve it, don't you think
Doesn't matter if it is $2 or $5.
All these Vista Support Packs prove my knowledge and are true modifications, not like the current Youp Pax crappy releases from a dumb person who doesn't even know how a INF file works.

Soundblaster Live 24bit External + Vista h

Ugh, what a nightware this is. Where do I start?
I installed using the installation cd that came with it and upgraded to the "vista" drivers on the creative website.
I have sound, but no CMSS and no working Line In.
Is there a workable solution to this?

I downloaded the file. Unzipped it and converted the iso file with WinAr. It was/looked like the same CD I have. It would not install anything because it did not recognize a soundblaster product,?but when I plugged in the card thru the USB a defalt windows driver was installed. I have been trying this for weeks with no luck. Somehow windows installed a default "usb audio" driver. The sound was all crackily when I played an mp3. I went into the hardware update and updated the driver. Windows found a driver to update with in the C:\windows\systen32 folder. It is now working fine.
Now my only problem is when I restart windows I have to unplug the usb with the soundcard attached then plug it back in when I am back at the desktop. I think there is a conflict at startup and the computer will freeze if the card remains plugged in but I have been living with this ever since I bought the card a year and a half ago. THe only issue is I am worried I will plug it in one of these times and it will not be recognized again. What a pain...

Live 24bit External Power Prob

I have this connected to my laptop but I repeatedly unplugged and plugged it in because I travel with my laptop. It worked fine for about 3 months and now when I plug it in, it wont power on. I have tried un-installing and re-installing all the software and drivers...i dont know what else to try....can you please shed some light on my problem

bump cause i need help

Having Troubles on Soundblaster Live! 24bit external and 5.1 out

Hi all,
I've installed a Soundblaster 24bit external on my Acer 5920 Laptop and connected through SPDIF to an Yamaha RX-V550 Amplifier but I only obtain stereo sound and not 5..
Which is the cause? I'm using VLC media player and already installed AC3 filter and turned ON the option "use spdif" and selected 5. audio sistem.
Regards?

I completely agree. I had so much fun with the effects and making my own...shame it seems evey time people try to 'improve" something they only take away the best parts.
I'm needing an external sound card with that good old EAX console, but obviously creative doesn't think it's good enough to have on portable versions.

Live! 24bit external and vista surrou

The built in drivers for vista are fine, and the one from?creative is also fine for this li've! 24bit external except it didn't have?CMSS. Is there anyway to at least let the sound come from all my speakers when i play stereo sources? I understand there wont be true 5. anymore but well at least something coming from the rear speakers?P.S it worked fine when i play 5.dvd sources?

Well for now, I guess you'll just have to wait for the new drivers with CMSS to be released. The current workaround to install the XP drivers will give you surround sound (not discreet 5.), but that's the best you can get. I'm using the Li've! 24bit external as well, and I've been refreshing the driver page for Li've! 24bit external daily hoping that it'll appear soon... But sigh~

Does the SB Live! 24bit External support AC3 and DTS pass-throuht on its SPDIF interfac

I know this card does not support hardware decode of AC3 & DTS, but does it has the capability to pass throuht the AC3/DTS signal to a external home theatre system ? Or only support PCM signal on it ?
Thanks,

Thannks for your reply. The problem occurs when trying to play DTS audio CD, not DVD Audio. I've tried to play DTS audio both from the original DTS audio CD and from saved to the hard disk DTS audio tracks. In both cases the players ( Media Player Classic, WinDVD6, PowerDVD, JetAudio ) are configured to use S/PDIF, and the result is either noise or silence. When a player able to decode DTS is configured to play through soundcard's speakers then the sound is decoded and sent to the receiver as PCM and played as stereo. I would like to use the AV-Recei'ver as decoder and amplifier ( not only amplifier ), because of two reasons:. The?signal sent to the receiver as DTS audio is decoded and played as 5. channel audio. This is? exactly the same as playing DTS audio CD on the conventional DVD Player, connected to the AV receiver?through?the digital output. 2. The quality of the AV-Recei'ver is greater than the quality of the SondBlaster Li've! 24bit External, so it's much better to send digital signal to the receiver and leave it to decode, convert to analog and amplify the sound signal. The most interesting thing is that the same configuration containing?the software player, the SB Li've! and the AV Recei'ver connected through the S/PDIF recognizes, decodes and plays correctly the DTS/DD sound of DVD-Video titles played on the computer ... !?! :smileysurprised:

Why will MSN Live Mail not open in Safari

I can not get MSN Live Mail to open in Safari. I can MSN, but when I click on Hotmail it just keeps trying to load without getting anywhere?????

I had to go through the same thing, had to go over the Firefox.
See http://iriskao.com/?p=82

SB Live 24bit external & openS

Similar Messages

Maybe you are looking for