Scanner EPSON Perfection 2450 photo ne fonctionne plus avec Mac OS X 10.6.8 depuis quelques jours. Pourquoi ?

Scanner EPSON Perfection 2450 photo ne fonctionne plus avec Mac OS X 10.6.8 depuis quelques jours. Pourquoi ?
Le scanner n'apparaît plus dans la liste des imprimantes, aucun des pilotes conseillés par Apple ne permet d'installer le scanner.
Ce scanner fonctionne toujours sur mon mac portable qui n'est pas sous Mac OS X 10.6.8.
Merci de m'aider

Essayez ceci:
Mettez le disque du système d'exploitation de l'ordinateur et redémarrez en maintenant enfoncée la touche C. Lorsque l'ordinateur démarre démarrer le processus d'installation. Ne vous inquiétez pas, vous ne allez pas à installer le système d'exploitation.
Le premier écran demande une sélection de la langue. Sur l'écran après que vous verrez une barre de menu. Cliquez sur Utilitaires et sélectionnez Utilitaires de disque. Lorsque ce est ouvert, sélectionnez le disque dur sur la gauche, SOS, puis Réparer le disque.
Lorsque la réparation de disque est terminée quittez Utilitaire de disque et redémarrez l'ordinateur.

Similar Messages

  • Photoshop CC doesn't 'see' my scanner (Epson Perfection 3170 Photo). I'm on  Mac 10.8

    There is no 'Twain Acquire' option in menus, nor is there a suitable pluggin showing up in that menu option that would allow me to 'communicate' with my scanner.

    Adobe discontinued their old 32 bit Twain plugin for the 32 bit version of Photoshop CS6.
    There is no free TWAIN software for 64-bit Photoshop. My recommendation is for the paid 3rd party software, Vuescan, that supports both 32 and 64 bit TWAIN operations in Photoshop for just about any scanner out there.  www.hamrick.com
    You can use File > Import Images from Device and see if that meets your needs.
    Gene

  • Epson perfection 2450 photo and Mountain Lion

    Is there anyone who has been able to use their Epson Perfection 2450 photo with Mountain Lion.  When I bought my new Apple computer, it had Mountain Lion.  I have not been able to use my scanner since then.  Is there a way to get the software necessary to use it?

    I researched and so far I only have been able to access the Perfection 2450 thru Image Capture in Apps. I had to go to apple software update in my menu bar and get the latest driver. It works fine in IC. It reconizes the 2450. What I was looking for is the program i was using in my macbook 10.6 os. I don't think at this point apple wants you to use an outside program. Image Capture lists periferels and that is the way to access them. I gave up looking further.

  • I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro.  Why can't I see my scanner (Epson Perfection 3200 Photo) from the File Import menu?

    I have downloaded and installed Photoshop Elements 11 on my new Macbook Pro.  Why can't I see my scanner (Epson Perfection 3200 Photo) from the File>Import menu?

    There was no driver update available (it said my driver was up to date), so I just deleted the scanner and restarted the computer.  when it came up, the scanner had already been added again.  With great anticipation I tried to import from Photoshop...but no luck (scanner was not visible).  I finally ended up calling Epson (had great difficulty in locating a number for support) and they finally told me there is no driver update for OS X 10.10 and I should as a work around use "Image Capture" application.  I tried it, and it works quite well.

  • Pourquoi Audition ne fonctionne plus avec mac OS 10.6.8?

    pourquoi Audition ne fonctionne plus avec mac OS 10.6.8?

    Bonjour
    J'ai Audition CS6 (5.0.2) et veux passer à la dernière mise à jour CC.
    C'est possible pour beaucoup d'applications sauf Photoshop !! Lightroom !! et Audition…

  • Dreamweaver 8 ne fonctionne plus avec mac OSX 10.7

    Comment faire quand dreamweaver 8 ne fonctionne plus avec lion 10.7
    merci

    Bonjour,
    À partir du système d’exploitation Mac OSX 10.7, l’émulateur d’applications PPC “Rosetta” qui vous permettait d’utiliser Dreamweaver 8 disparaît. L’application n’est donc plus reconnue…
    Vos options :
    - mettre à jour votre application en une version disposant des ressources pour une machine à processeur Intel.
    - réinstaller la version 10.6.X sur votre Mac.
    Vous trouverez à cette adresse la liste des applications compatibles avec Lion et les systèmes suivants.
    Cordialement,
    Alex Gulphe

  • Epson Perfection 2450 Photo

    Are there any good drivers that finally allow a Mac user to take advantage of this equipment's capabilities?

    Hi, rgpaints. What doesn't suit you about Epson's driver? You might elicit more suggestions by letting us know what problems you're having with it.
    If you want to try something different:
    http://www.hamrick.com/

  • Epson Perfection 2450 scanner not working with Mavericks

    My Epson Perfection 2450 scanner stopped working when I upgraded to Mavericks, it is not recognizing the scanner. Tried restarting, using a different USB cable, a different USB port, etc...with no luck. The issue is that my computer no longer seems to recognize that I plugged it in. Tried it with Image Capture, Photoshop, Preview and even the old Epson software.
    I tried downloading the Epson Scan Patch for Mavericks released on Oct 31, 2013. That did not help either.
    I'm on a MacBook Pro running Mavericks version 10.9.3.
    Love this scanner and don't want to have to buy another. Any help to get my Mac to recognize it would be greatly appreciated.

    Syd,
    My wife's iMac with 10.6.6 stopped working with her Epson 2480 Photo scanner. Get the error message "SCANNER reported an error. An error has occurred during scanning" I am trying to use it from the Image Capture App or from the print/fax option in Settings which opens Image Capture. I ran the uninstall program and then reinstalled the ICA 13969 .dmg but get the same error. Not sure what else I can do.

  • My Epson Perfection V500 photo scanner stopped working when I upgraded to Yosemite. The only scanner available is my Epson All-in-One.

    I installed the new Yosemite operating system even though I was afraid something bad would happen. Well. it did. I can no longer scan photos using my photo scanner. I have updated all the drivers and it is still not working. I have an Epson Perfection V500 photo scanner, as well as an Epson WorkForce 845 all-in-one scanner, printer, copier. The 845 is on the network. The V500 is connected to my computer. For some reason, I keep getting the error that my V500 is not connected and when I try to add it, my mac does not find it. I know it is there. It was working before I upgraded. Help

    You may have already done so, but if not...
    Try a different USB cable.
    Reboot your computer
    Launch Disk Utility (in the Utilities folder) and Repair Disk Permission
    in the left pane, click once on the name of your hard disk
    in the right pane, click on the First Aid tab near the top
    under the blank window, click the button "Repair Disk Permissions."
    Afterward, click the "verify disk" button and it will check your hard disk.
    Now, try your scanner...

  • OS 10.4.4 + Photoshop Elements 2.0 + Epson Perfection 3200 Photo Scanner

    i have an epson perfection 3200 photo scanner which had worked fine importing into photoshop elements 2.0 when i had an imac g3, but i cannot get it to work on my new machine, a powerbook g4 using 10.4.4. epson said it should work (i downloaded the most recent driver) but adobe said that 10.4.4 does not support photoshop elements 2.0 or 3.0. i downloaded 3.0 (they have a month trial) and it acknowledged my scanner for a second but then repeated the error message.
    any thoughts?
    thanks.
    powerbook g4   Mac OS X (10.4.4)  

    i have an epson perfection 3200 photo scanner which had worked fine importing into photoshop elements 2.0 when i had an imac g3, but i cannot get it to work on my new machine, a powerbook g4 using 10.4.4. epson said it should work (i downloaded the most recent driver) but adobe said that 10.4.4 does not support photoshop elements 2.0 or 3.0. i downloaded 3.0 (they have a month trial) and it acknowledged my scanner for a second but then repeated the error message.
    Further to Barbara's suggestions, have you tried uninstalling your scanner and then disconnecting it physically from your PB. Then reinstall the scanner software and any updated drivers with the scanner still disconnected. Then reconnect the USB to the scanner and see whether you have better success. Epson scanners can be fussy (shy?) about being recognised, and I used these steps when I "lost" my Epson 3170 when moving to 10.3.x.
    Barbara is absolutely right about PS Elements 2 and 10.4.4 - I'm also using it regularly with no problems. Since you got it to work with your previous computer and OS, you can also get it to work with your new PB and 10.4.4 - it just may need a little coaxing...

  • How to access my Epson Perfection 2400 Photo scanner?

    How can I access my Epson Perfection 2400 Photo scanner after upgrading from PS CS4 to CS6?
    There is no Photoshop File/Export/Epson scanner listed anymore. I downloaded a TWAIN plug-in and loaded it in the PS Plug-in folder, but that did not help.
    What should I be doing?
    Mac OSX 10.6.8.

    Moving this discussion to the Photoshop General Discussion forum.

  • Epson Perfection 2480 photo scanner

    Just got a new iMac running Snow Leopard. I have a problem getting my scanner to work, Scanner is a Epson Perfection 2480 Photo. I have down loaded the latest driver from Epson. If I try to run the scanner from finder I get the following message.
    The application “Epson Scan” could not be launched because of a sheared library error: “<EPSON Scan> < EPSON Scan> < TWAIN Source Manager.Shlb> ”
    The scanner will not work in any applications giving error messages when trying to find it.
    However in system Preferences you find the scanner in Printer & Fax and if you open it from there you can scan to the Desktop, Documents Folder etc.
    Will scan from Image Capture
    I have spoken to Epson and Apple
    I think the problem must be the “shared library error” But having spent the best part of 2 days on the phone to various people I am no further forward.
    Epson say is a Apple problem
    Apple say is a Epson problem
    Any help would be appreciated

    I have looked at this again.If you go applications, epson scan, more info it shows application as powerPc version 2.73 try to run it from applications and you get sheared library error as detailed in previous post.
    Go to joe, library. printers and there is a 2480/2580 scanner, more info on that shows application universal version 6.4 and allows you to select 32bit and to open using rosetta this will open and scan.
    When you run from system preferences this is what is opening not the version 2.77 downloaded from epson. Is this where the shared library error is and if so how do I solve it, have tried deleting v2.77 but scanner still will not run in Word etc. tried deleting v6.4 still no go.
    Also if you go Mac HD,library,image capture,twaine data sources the epson v2.77 appears and not v6.4 in there but in devices there is epson scanner app. version5.2.5. Getting nowhere fast

  • HT1338 I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

    I have OS X.9 and I cannot use my Epson Perfection 4490 Photo Scanner. There is no driver available on the Epson site. What can I do?

    Did you try the driver from this Epson page: Epson Perfection 4490 Photo, Drivers & Downloads - Technical Support - Epson America, Inc.
    OT

  • Elements 13 does not recognise Epson Perfection 4990 photo scanner

    I just installed Elements 13 (also have 11 and 12 installed).  I have installed 13 as a 64 bit (windows 8), but cannot get it to recognize my Epson perfection 4990 photo scanner (or Perfect Effects 4, for that matter).  Any ideas?  I copied the PlugIN files from 12 to 13, but so far no dice.

    See this Tech doc:
    http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html

  • Install Epson Perfection 3200 Photo Scanner

    My kernel is a custom built 2.6.3. I am trying to install an Epson Perfection 3200 Photo Scanner. It works under SuSE8.2 so there is no fundamental hardware problem. The sane website lists the 3200 as completely supported.
    The system recognizes the scanner, as shown in part of cat /proc/bus/usb/devices:
    D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
    P: Vendor=04b8 ProdID=011c Rev= 1.02
    S: Manufacturer=EPSON
    S: Product=EPSON Scanner
    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
    I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    The program sane-find-scanner produces:
    found USB scanner (vendor=0x04b8, product=0x011c) at libusb:001:003
    # Your USB scanner was (probably) detected. It may or may not be supported by
    # SANE. Try scanimage -L and read the backend's manpage.
    The program scanimage -L produces:
    No scanners were identified. If you were expecting something different,
    check that the scanner is plugged in, turned on and detected by the
    sane-find-scanner tool (if appropriate). Please read the documentation
    which came with this software (README, FAQ, manpages).
    The problem appears to be that the system cannot find a driver. Is the driver suppose to come from sane and there is a configuration issue? Is the system suppose to find the driver as a module or compiled-in the kernel? Is there some wild and wonderful dev - devsfs issue?
    Any intel (small i) would be most appreciated.
    Rick

    the generic usb scanner module is no longer in the kernel. any scanner that used it mus use libusb now. to do this first remove any entry you have in any module loading files that load that module.
    next add either one of these lines to your fstab:
    none /proc/bus/usb/ usbfs defaults 0 0
    or
    none /proc/bus/usb/ usbdevfs defaults 0 0
    but going by your output so far you would seem to have one of these two lines in fstab.
    anyway either one of those lines will give root only access to your scanner so you will need to give your user access to the device. your can do that in a few ways.
    first you can create a group add your user to it then edit your usbfs line to read:
    none /proc/bus/usb/ usbfs rw,mode=666,gid=<--newgroupnamehere--> 0 0
    or if you have a single user you can edit the line to read:
    none /proc/bus/usb/ usbfs defaults,mode=666 0 0
    if this does not work read up on hotplug or add this line to you rc.local:
    chown -R <yourusername>.users /proc/bus/usb/xxx/*
    where the "xxx" represents the three digit number directory in /proc/bus/usb/ that represents your scanner. you can find this by running scanimage -L as root and it will give you two three digit numbers in the output. then look in the number directory/directories for those two numbers and that will be the directory you put in for the xxx.

Maybe you are looking for

  • Unable to insert data in to database

    public String button1_action() { // Add your event code here... String pid = (String)textField1.getValue(); String pnam = (String)textField2.getValue(); String pjob = (String)textField3.getValue(); String pfre = (String)textField4.getValue(); try { /

  • How to Restrict Master data in value help screen for a user???URGENT

    Hello Gurus, I have a requirement.When a authorized user logins to view the report, he should see only list of customers assigned to that user in the value help screen, instead of displaying whole master data.and the data is displayed perfectly fine

  • Application Builder problem on one server but not another

    I am having an Application Builder problem. When I get into App Express and go inside the builder and try to edit a listed application, I get an "http 404 the page cannot be found. The page might have had its name changed or is temporarily unavailabl

  • IE11 bug - javascript script continues execution after the tab is closed

    Steps to reproduce: 1. Open 2 blank tabs in IE. 2. In one of them navigate to this demo page: http://jsfiddle.net/MTJ27/15/ ; it runs 4 web workers in a loop. 3. Check the CPU utilization (on a 8-core machine it should show 50%, for 4 cores or less:

  • No images in Google Play

    I have no images anywhere in Google Play Store.  When it was first pushed out I did.  Even at start up it's just a basic Apps, Music, Books, Movies, and Games Menu with no graphics.  If I go to staff picks, for example, it lists the picks but none of