Scanning and printing a double-sided document .
Hello I have a Canon MX 922 that I am trying to scan a double-sided document and then print that double-sided document any help would be greatly appreciated thank you
Hello I have a Canon MX 922 that I am trying to scan a double-sided document and then print that double-sided document any help would be greatly appreciated thank you
Similar Messages
-
Printing a double sided document
Hi
I am trying to print a double sided document, it tells me to do this I need to select Two sided US letter which is not available in the drop down menu. Help please thanksWhat tells you?
What drop down menu?
What printer are you using?
Does your printer support duplexing? If it doesn't you will have to print one side and feed the paper back into the printer to print the 2nd side.
Why are you printing to US letter if you are in the UK?
Peter -
How can I copy a double-sided document and make double-sided copies on an officejet 6830?
how can I copy a double-sided document and make double-sided copies on an HP officejet 6830?
Hi,The 6830 only provide double sided printing, it does not offer 2 sided copying, a such can only be done manually. You may find the printer specifications below:Scanning options (ADF): Single-sidedhttp://store.hp.com/UKStore/Merch/Product.aspx?id=E3E02A&opt=A80&sel=DEF#merch-tech-specs Regards,Shlomi
-
Printing multiple double-sided Word documents results wrong side being used
When printing from MS Word (Office 2004 11.2.5) several Word documents in rapid succession (so the first has not finished by the time the second has been received by the printer) in double-sided layout (as per the Print Dialog option) and the first document is an odd number of pages then instead of the final page of the first document being printed with stuff just on the first side it actually contains [incorrectly] the first page of the second document on the second side.
That is -
Document 1
1-2 3-4 5-6 7
Document 2
1-2 3-4 5-6 7
end up like
1-2 3-4 5-6 7-1 2-3 4-5 6-7
instead of
1-2 3-4 5-6 7-blank 1-2 3-4 5-6 7-blank
This happens when printing to both a HP Color LaserJet 4600DN (with built-in duplex unit) and a Konica-Minolta Magicolor 7300 (also with built-in duplex unit).
The HP Color LaserJet has 160MB of RAM and a hard disk, the Konica-Minolta Magicolor has 256MB of RAM and no hard disk.
Has anyone else seen this happen and does it happen in other programs (Microsoft being notorious for the number of bugs in Office for Mac they have).Hi John,
This sounds odd as each print job would exist as a separate spool file with its own job number. If it wasn't for both machines doing the same I would have said it was the printer. But as you have said Word is a rogue when it comes to printing (and man other things). In order to get the next document printing so quickly after the previous, do you have both documents open? Also, are you using the Print icon in Word, or goinf File > Print? If you are using the icon, then I would suggest trying File > Print (or Command P ) as I have seen some strange results when the icon is used.
I have also seen the "Collated" option cause unwanted results. Try disabling this in the Copies & Pages menu of the Print Dialog (and maybe saving a Preset with it disabled so it can be defaulted to this).
Regards,
Paul -
Faxing double sided documents with HP 6700
OfficeJet 6700 Premium with Win 7 Pro 64 bit.
How can I fax a group of double sided documents.
Although my printer contains a duplexer, I don't see how to take advantage of this feature when faxing.
Any help would be appreciated.
Thank you.
This question was solved.
View Solution.The Officejet 6700 does not have a duplexer in the Automatic Document Feeder (ADF) that would allow copying or faxing the back side of documents automatically. For the Officejet 6700 you will need to do one of the following:
Copy the back side, then interleve the copies with the original and feed this through the ADF, or
Load the pages manually on the scanner glass.
If you have many double sided copies to fax or this is a regular occurance you may prefer a printer that has double sided scanning capability in the ADF. The HP Officejet Pro 8600 Plus and HP Officejet Pro 8600 Premium are two models I am familar with that have this capability.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
I can't print a double sided paper
I can't print a double sided project, I don't know what I am doing wrong.
If your printer doesn't do two sided printing (most don't) print the odd pages first, then flip the paper over and print the even pages. You will have to experiment to see how to flip the paper.
I do it by printing page 1, then flipping page one over and putting it back into the paper tray.
Then I print pages 2 and 3.
Remove the the completed page 1 and 2.
Flip page 3 over and print pages 4 and 5.
Repeat the process until you are done. -
Standard smartform and print program for sales document
HI All,
Is there a standard smartform and print program for sales document or sales order. If someone has worked with it do reply.Hi Shashank,
What exactly you would like to print for Sales Orders in Smartforms..?
regards,
Ram. -
How do I setup magazine to view pages consecutively, but print for double sided 11x17?
I have a quarterly newsletter I've begun. I set it up as (8) 11x17 pages with (2) 8-1/2" x 11" page views per 11x17 page, so that when they print double sided, there are consecutive. The problem is that when I am trying to navigate from page to page, they are not consecutive on the screen. Is there a way to set up the pages at 8-1/2" x 11" consecutively in InDesign, but send to printer for two sided 11x17 and have the pages come out in the right place?
Not sure that I am describing properly. For instance viewing an 11x17 page (Page 1 as far as InDesign is concerned), the right half is Page 1, and the left half is page 16; or (page 2 in InDesign) is page 15 on the left side, and page 2 on the right side. This all prints perfectly, but navigating it during layout is extremely cumbersome. Also, printing for general public PDF viewing is impossible.
Thanks, RickLOL - That for sure I knew. I just didn't know what to do about it. I checked Acrobat...but I never really noticed that "booklet" option before, and right now the magazine isn't setup right, so I can't tell if it's working. will it know that page 1 and page 16 go on the same side of one 11x17 sheet, and pages 2 and 15 go on the other side of that same page when printing two-sided?
-
Hello,
i have a nagging question that's been bugging me since i ever started using indesign CS4:
how do i print double-sided spreads in a single-side printer?
the print shops i work for(and myself of course) want me to print a makeshift of a book which i do using the print booklet option on 2-up spread, but they're consecutive and i haven't found any option to alternate spreads for single side printing. It'll all be ok if i had a double-sided printer so i'd use a driver setting and force doubleside on the printer itself, but without that option....
is this possible or wasn't even considered?, because the other solution is to print spread by spread and manually feeding each page back which is totally unproductive....the print shops i work for(and myself of course) want me to print a makeshift of a book which i do using the print booklet option on 2-up spread, but they're consecutive and i haven't found any option to alternate spreads for single side printing. It'll all be ok if i had a double-sided printer so i'd use a driver setting and force doubleside on the printer itself, but without that option....
is this possible or wasn't even considered?, because the other solution is to print spread by spread and manually feeding each page back which is totally unproductive....
Like my answer of yesterday you can use the 2-up Consecutive feature of Print Booklet and enter you page numbers/order manually.
Doyle -
I need to print a paper double sided, but eveytime i go to the print options i can't change the setting to turn the "two sided" on. I don't think its a problem with the printer either.
If your printer doesn't do two sided printing (most don't) print the odd pages first, then flip the paper over and print the even pages. You will have to experiment to see how to flip the paper.
I do it by printing page 1, then flipping page one over and putting it back into the paper tray.
Then I print pages 2 and 3.
Remove the the completed page 1 and 2.
Flip page 3 over and print pages 4 and 5.
Repeat the process until you are done. -
I have a simple label document in Pages which I print to my label printer. The label is 1.49 x 3.47 inches and needs to print in Landscape, and it needs to print to my Dymo label printer. How do I set up the Page Setup or Print Setup so it defaults to this document size, orientation, and printer, every time, without me having to manually enter those settings every time?
Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.
-
I was trying to print something from the internet and when I did what came out was half of the document. What should have been printed in 1 sheet of paper was printed in 2 and it was only half of the document because the letters and images were too large.
I noticed that when I saved the document from the Internet to my folder the document was in half. I tried to save it again but it didn't work. I tried to fix the printer to see if that was the reason but still I continued to see only half of the document. I tried printing again but still the same thing happened.
I thought it was a problem with my printer but then I remembered that the same thing happened with other PDFs files. I then tried the same thing on Internet Explorer and when I saved the document I saved the whole document not only half of it and the letters and images where not large like when I used Mozilla. I was also able to print the whole document in 1 sheet of paper.
I don't how to solve this problem, thank you for your help and attentionHi efacg,
Most printing issues are solved by resetting the Printing preferences. When you print from Firefox and you click on the down arrow, do you see Defualt and Firefox? Please make changes to the preferences here and preview the document.
If this continues to be an issue please also see [[Fix printing problems in Firefox]]
If there are any other questions, please do not hesitate to ask, we are here to help. -
OLE automation-To insert and print picture in word document
We are upgrading from 4.6C to ECC 6.0.One of our report program to print CV and insert photo in the word document works fine in version 4.6c.The methods to draw text box and insert photo to the required size don't work in ECC 6.0.seeking your advise.
I have attached the code:
Insert DrawingBox for CV Photo
call method of wordobj 'DrawTextbox'.
call method of wordobj 'DrawSetInsertToTextbox'..
call method of wordobj 'FormatDrawingObject'
exporting
#01 = '0' "Tab
#02 = '1' "FillColor
#03 = '1' "LineColor
#04 = '8' "FillPatternColor
#05 = '0' "FillPattern
#06 = '1' "LineType
#07 = '0' "LineStyle
#08 = '0.75 pt' "LineWeight
#09 = '0' "ArrowStyle
#10 = '0' "ArrowWidth
#11 = '- 1' "ArrowLength <--
#12 = '0' "Shadow
#13 = '0' "RoundCorners
#14 = '15.7 cm' "HorizontalPos
#15 = '1' "HorizontalFrom
#16 = '5.0 cm' "VerticalPos
#17 = '1' "VerticalFrom
#18 = '0' "LockAnchor
#19 = '4 cm' "Height
#20 = '4 cm' "Width
#21 = '1 pt' . "InternalMargin
if not path1 is initial.
call method of wordobj 'InsertPicture'
exporting #1 = path1 "Name
#2 = '1'. "LinkToFile
endif.
call method of wordobj 'DrawUnselect'.
call method of wordobj 'EndOfDocument'.
call method of wordobj 'InsertPara'.
Thanks..hi ,
use this for the custom pictures
Re: OLE / ms WORD / Create new document, insert image and print
use this for getting sap icons ...
Re: How to get SAP Icons as OLE Object -
Incorrect printing of double sided pages on Officejet Pro 8600
When I print a document (generally from MS Word 2010) and ask it to be printed on both sides, the HP8600 gets it wrong!
(I had the same problem with my previous Officejet 8500). It prints page 1 on the first page BUT it prints page 2 on the next piece of paper on the same facing side as for page 1. So the back of page 1 is blank!! This is quite frustrating as I often want to print a long document on both sides of the paper and get the pages correct! So all the ODD pages are on the facing side and all the EVEN pages on the rear. The 8600 doesn't do this, nor did the 8500. I think when I print it using the Adobe reader and PDF documents it gets it correct. So it may be an inter action between Word, and the HP 8600 driver etc... Any ideas to correct this. I have only had the printer just over 4 months.I used a Word document that was 3 pages long and printed it from MS Word 2010 and it printed incorrectly (page 1 on sheet 1 side 1, page 2 on sheet 2 side 1, page 3 on sheet 2 side 2). Then I saved it in PDF and printed from Adobe Reader and it printed correctly. But I noticed that Word printed it in reverse order whereas Adobe printed in normal order starting from Page 1. So I looked in Options/Advanced/Printing in Word 2010 and there was a box for Print pages in reverse Order that was ticked. So I un-ticked this Print pages in reverse order and re-printed from Word and lo and behold it printed it correctly! It looks to me as if Word has a 'bug' (sorry MS undesired feature) that when printing in reverse order sometimes gets the pages incorrect. It is useful when printing long documents to print them in reverse order as they are in the correct order with page 1 on top. But eh oh I will leave this off and see whether the problem disappears. But many thanks for your interaction and getting me to investigate. 'Praise the Lord' for forums.
-
elements 9 let me scan directly from my printer, resize and print in a few steps. Elements 11 won't let me scan from my printer, won't let me resize to print. How did I lose this capability by "upgrading"?
To scan in the editor in PSE 11, you need to install the TWAIN plugin:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html
Maybe you are looking for
-
Icon users - if you're looking for Cyan......
I decided to contact support for myself to see what they say. Here's the transcript. My name is Kim, how may I assist you? Visitor: Hello! I have the Lumia Icon and I was wondering if you guys have ANY idea when we can expect to get the Cyan update?
-
Events not showing time in iCal
I just lost my hard drive last week and now I'm re-entering everything. I'm trying to put my calendar events back into iCal and it no longer shows the time next to the event on the calendar. It used to say for example: "Dr. Appt-3:15" but now it only
-
HT5787 My I phone has locked me out with some 4 digit passcode now!!!
Please Help
-
Hi Expert, I want to download SAP user audit report through USMM. but whenever i run USMM and click on system measurement its goes on background job. I need this report in PDF format. plz help
-
HI I got a new mac last week, then bought creative cloud. I wanted my plug ins from my old mac switched over, but the whole lot migrated over. My computer now has my old CS6 in it, and I want to get creative cloud back. Problem is I have different