Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?

Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell. 
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

Similar Messages

  • I have purchased an Iphone 4 in Dubai two years ago. The model number is MC319LL. And unfortunately, I attempted to upgrade it online to a newer version 5.0.1(9A405) but right away my sim card was blocked. I can no longer use the telephone.

    Dear Sir:
    Two years ago I have purchased an Iphone 4 here in Carrefour Supermarket, Dubai UAE. The model number is MC319LL. Unfortunately last November 2011, I attempted to upgrade the OS to 5.0.1 but rightaway, my sim card(Etisalat UAE service provider) was blocked. As a result, I can no longer use the telephone function. I just found out recently that this model number .i.e.MC319LL is to be used for AT&T. My question is, how can I restore my unit to work as a celphone? And why is it that when I upgraded it, it was blocked. Was it illegal to sell this phone in the UAE market?
    Thanks a lot.
    Kathleen Jewel

    You purchased a "hacked" iPhone(hacked to unlock it) from a non-official source for iPhones. Unfortunately, that's the risk you take when you purchase from a non-official source. There is no way to get your phone officially unlocked, & all warranty & support has been voided. Sorry, but you don't have any good choices here. Your best bet is to go back to Carrefour Supermarket & get your money back, then purchase an iPhone from an official source. If they won't give you your money back, have them "fix" your phone...they will have to "hack" it again. Good luck.

  • The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command   to e

    the problem I have since I upgraded to Mavericks version 10.9.1
    The problem appears only with Mail not with other programs, not even with my browser.
    When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
    As I have a problem with my eyes, This is a serious matter for me.
    When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
    Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but  he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

    Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
    My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
    I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
    Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

  • Difficulty scanning slides on my Epson V600  running Lion, Adobe Photoshop CS6,  and can no longer use the Epson scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?

    I am running Lion 10.7.5, Adobe Photoshop CS6, scanning slides on my Epson V600 and can no longer use the scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?
    In 10.7 there is not a twain that works with Photoshop for importing with all the options needed to scan transparencies. I noticed that when I was scanning in October 2012 I was still using CS6 so somehow I was managing to be able to use all the scan features.
    They sell 2nd party software (VieScan and Silverscript)which I found to be just mimially OK and very hard to use.
    I just want to scan like I used to.
    Can I use time machine to go back to an earlier operating sysytem LEOPARD,  and then do my scans and then save the photos and them go back to the LION system?
    I spent 7 hours trying crazy solutions - downloading Windows CS2 Photoshop and then using a program so I could run it on the apple. Then I couldn't figure out how to put a plug in for the scanner in the stupid windows Photoshop program. Googgling the computer like a mad woman trying to ask questions. I am not giving up...
    Please help if you can...
    Thanks...

    I assume you've tried using Image Capture. Give VueScan a try.
    http://www.hamrick.com

  • Since updating to Mavericks, i can no longer use my USB Ethernet Adopter

    Since updating to Mavericks, i can no longer use my Ethernet USB adopter as the drivers are only supported to the previous version. I need to use this where i work as Mac's cant accsess the wireless. Ive been told the only option restore to the prev OSX.. The only problem is i havnt set up time machine.
    Is there anything i can do to either revert to the original OSX ( the mac is only a month old) or restore to an older version without using timemachine.... Or even better just get my Adoptor to work?
    Any help  would be very much appriciated as i can only go for so long with the internet at work.
    Thanks

    Regarding the printer:
    From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
    If that does not help then from braden85:
    This first article is about changing or updating printer software in Mountain Lion, and can be found here:
    OS X Mountain Lion: Change or update printer software
    http://support.apple.com/kb/PH10622
    This next article tells you where to find the printer software for your specific printer brand:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669

  • I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

    I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?

    Is your printer selected? <br />
    Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
    See the screenshot below.

  • TS1702 after upgrading to ios 6 i can  no longer use the app store.

    after upgrading to ios 6 i can  no longer use the app store on my iPhone, i am unable to install new apps. i chose to fill out the security questions and the problem seems to occur since then. what could be a solution to get the app store working again??

    i just contacted apple support and the solution is the following!!!!!
    connect the iphone to your computer  and open itunes
    then click on itunes store at the left side of the screen
    then click at the right top side of your itunes screen on your email address (or id that is displayed there in the black bar)
    choose log out
    then go to the top of the screen with the search option in itunes where you can search in the store and choose an app that you have not yet installed.
    then you get the security questions also in itunes, fill the them out and after you have done that you are asked to log in again
    now when you install an app that works (it is then on your computer still)
    open the app store on your iphone and choose the updates button and install the app from the cloud
    now when you install new apps also from the app store on your iphone it works again!!! and you are no longer asked about the security questions
    (the other option they told me (that i did not have to use)  is: go to settings/general/ all the way at the bottom of the screen choose make new settings restore networksettings and choose yes)

  • I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

    I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

    * [/questions/777886]
    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.latched -> <b>false</b>
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    You can use the Filter bar at to top of the about:config page to locate a pref more easily.

  • I can no longer use the keyboard shortcuts, 'command  C' and 'command   V'.  Did I inadvertently do something to my keyboard or computer that caused this?  Is there a way to fix it?

    I can no longer use the keyboard shortcuts, 'command  C' and 'command   V'.  Did I inadvertently do something to my keyboard or computer that caused this?  Is there a way to fix it?

    You can also check in System Preferences > Keyboard > Keyboard Shortcuts, make sure that custom shortcuts were not created using those same commands. If ones were, they could be creating a conflict. Step throuogh each of the items in the left list, checking the array presented in the right pane for each.

  • My iphone 4s will not connect to networks.  the button is greyed out and cannot turn o.  I have reset the network settings and it still does not work - any ideas?

    My iphone 4s will not connect to networks.  the button is greyed out and cannot turn on.  I have reset the network settings and it still does not work - any ideas?

    Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem.  I just updated to 8.1.3  - I thought the update might fix it.

  • HT204382 I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

    I just bought Quicktime MPEG - 2 to play MPG video files and still doesn't work. any suggestion?

    Please note:
    If your Mac has OS X Lion, MPEG-2 functionality is built in and the QuickTime MPEG-2 Playback Component is unnecessary.
    QuickTime MPEG-2 Playback Component for Mac OS X - Apple Store (U.S.)

  • Can no longer use the Remote app on iPhone 5 or iPad 1

    Hi,
    I've long used the Remote app to control my iTunes library which I stream through two Airport Expresses. It's been a great solution for some time.
    However, since the latest updates, I can no longer do this. The iTunes library does not show up in the app, only a message telling me to turn on Home Sharing in iTunes.
    I have turned Sharing off and on on the iPhone, iPad and iTunes but have had no luck getting it to work.
    Any suggestions welcome!
    Thanks
    Phil

    Thanks Linc,
    well that *****... I guess I am going to have to reach out to the developers. It does not look like they are doing this anytime soon cause the website is pretty old in itself.
    Thanks for the info on this,
    Paul

  • Ichat doesn't work, any ideas please?

    Hi, I'm using a powerbook g4 with osx 10.4.9 with Ichat AV 3.1.8 with the apple isight web cam. I'm trying to connect with a family member who's using a logitech quickcam pro 4000 camera with updated logitech software on a pc with the latest Vista operating system. We're up and running with AIM and can send text messages but we can't communicate using the web cams. my family member and myself can get an image of ourselves with our own web cams, so the cameras are working, we just can't see each other. I'm also using an airport extreme, I don't know whether this makes any difference or not. My firewall is set to off. If any of you have any ideas on how to get this stuff up and running, I would apreciate your help. Thank you!
    Powerbook G4   Mac OS X (10.4.9)  

    Hi brettkramer,
    Welcome to the Apple Discussions
    On Vista AIM 6.1.32.1 seems to be better.
    ON the PC they will still have to allow it though the Firewall
    Hopefully the Vista Firewall has not changed too much from XP
    http://www.ralphjohnsuk.dsl.pipex.com/page12.html#_Service
    This does suggest using the UPnP option and this will aslo need to be allowed in the Modem or router
    11:05 PM Monday; April 16, 2007

  • I lost my connection when I was using internet and when I want to reconnect to airport it give me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hi,
    I lost my airport connection when I was using internet and when I wanted to re-reconnect to airport it gave me connection timeout error, I changed my password on router but still doesn't work. How can i fix my problem?

    Hello there hastibahreini,
    It sounds like you were using your Wi-Fi network from your Airport base station and the connection cut out. You have reset the password on the device but the issue persists. I would try the 3 resets outlined in the following article in order to help resolve the issue. If it persists, is the Wi-Fi connection issue happening on more than one device or computer?
    Resetting an AirPort base station FAQ
    http://support.apple.com/kb/ht3728
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • I down loaded fcp x 10.2 and my playhead doesn't work, any ideas

    I down loaded fcp x 10.2 and my playhead doesn't work, any ideas

    Move it to the trash and download again..
    Russ
    PS: I assume your profile info is somewhat outdated.

Maybe you are looking for