Scanning legal size on Pro 8610 printer

I have tried everything and can not scan legal size on this printer. It does not have a setting gear icon after you push print like it does when you push print. If you use the feeder on top it does not automatically detect the size, it always scans letter size. This HP printer has been the most frutrating printer I have ever had. I continually disconnects from my computer, I constantly have to reload it with the disk. I cannot initiate that scan from my computer so that I can select legal, because it wont set up. Frustrated, can anyone help me? Thanks

Hi, No, it does not know. You have to tell is to scan legal size. Please use option from your computer:             Regards.

Similar Messages

  • Unable to Completely Scan Legal Size Documents with Officejet Pro 8600 Plus

    I am trying scan legal sized documents on my new Officejet Pro 8600 Plus. I have reviewed the forums, and this has been a recurring problem in the past (see link---  http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14...   ), but does not appear to be resolved. Whether I use the document feeder or the glass, the document is cut off at the bottom, and appears to be stopping at the 'A4' size, vs. legal. I cannot locate any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current setting, if it is one. 
    I am using a Mac Pro, system 10.6.8, just installed and started using the printer a couple of days ago, and everything is up to date software-wise. Everything else on this machine has been working beautifully. 
    Can anyone identify what's going on here and how to correct it?
    Thanks for your help--I specifically chose this particular unit over the next model down due to the legal sized glass/bed, and if I can't use it to scan legal docs, well, that's a problem. Thanks for your help!
    This question was solved.
    View Solution.

    Hello,
    Please try the following steps:
    1. Open the HP Utility and select your device.
    2. From Scan Settings open the "Scan to Computer".
    3. Click the "Scan Tasks" tab.
    4. Select the Scan Shortcut used to scan, then click Edit.
    5. In the section of Scan from an HP Device click on the blue triangle to enlarge the menu.
    6. From the enlarged menu now open the drop-down menu next to Crop To and set as None.
    7. Click OK and try scanning again.
    Please let me know of any change,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Hp officejet pro 8610 prints solid black on scanned pdf and word doc pictures

    -HP Officejet Pro 8610
    -problem printing scanned pdf document and word doc. photos
    -My new HP Officejet Pro 8610 printed a newly scanned pdf document as an all black picture. I then printed a saved word documtent from my iMac which included a small picture. The document print was acceptable, but the picture was solid black. There were no error messages. These were, my initial tests, to check this new printer.

    Hey there @TM-10 
    Welcome to the Community
    I read through your post about your new Officejet 8610 scanning a document to your computer and printing out all black. I have a couple ideas for you to try.
    Try the steps in this guide: Unexpected Scan Output Using HP Scan Application for HP Multifunction Printers When Using OS X v10.9...
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    Ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help.
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY?

    HP Officejet Pro L7590 (L7555) has legal size flatbed but won't scan legal size documents - WHY? Scanning to a Macbook Pro osx (10.6)

    Hey there. What application are using to scan? Have you tried using a different application like Preview or Image Capture?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • LASERJET 100 MFP M175MW scanning legal size document problem

    I am on a Macbook Pro, running OS X 10.8.5. I am also using the HP Scan software 4.0.
    I am having problems scanning a Legal Size document. It always cuts off the bottom portion, acting like it was only us letter size.
    After loading a document onto my scanner/printer:
           I open the HP Scan software,
           Select the Scan Button
           Change the Crop to US Legal in the dropdown area.
            Continue
    Then when I look at the image scanned in, it is not complete.
    Is there something else I need to do to make this work, maybe a setting on the actual scanner/printer.
    I have tried to read all support documentation possible and I cannot get this to work. I even updated all my operating systems upgrades, but I am not running Maverick yet.
    I would be thankful for any help at all.
    Thanks!

    @MAMAC4 
    To my knowledge the only way you can scan legal is from the ADF, have you tried that? If you are trying to scan legal sizs docs from the flatbed than you will experience the cut off that you are stating in your post.
    Please try to re-scan the document using your ADF feeder and see if this will solve your issue.
    Thank you.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Scanning legal size

    Is it possible to scan legal size documents from the paper tray on my Deskjet 3511?  If so, how do I do it?
    This question was solved.
    View Solution.

    Hi,
    As per the printer specification this printer doesnt support legal size
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03353033&tmp_task=prodinfoCategory&cc=us&dlc=en...
    hope this helps
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • Problems with hp officejet pro 8610 printing labels

    I have a new HP offficejet Pro 8610 less than 6 months old. I was printing address lables (Avery 8160) and everything seemed fine after the first group then when I started the second set they were out of alignment I readjusted the paper and tried again to print and I get a message that there is a problem with printer or the the paper is not the wrong size for the job and its the same paper so thats not it I tried shutting everything down and starting over and it allowed me to print one and it was perfect but when I tried to print another it went back to same message wrong paper size I am still using same size paper I am using Avery 8160 labels and that is the size on the avery website I am printing from. Any help is much appreciated thank you.

    Hello ,
    Welcome to the HP Support Forums!
    I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
    Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
    You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
    I hope this helps,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to scan legal size document with Adobe Acrobat 6.0?

    How do you scan legal (8.5 x 14.0) size documents with Adobe Acrobat 6.0.0 ? There is no option for that size paper in the scan menu. And I can't find the answer in either my help file or on-line with Adobe.com. Can anyone help me?

    I use a HP OfficeJet G85. I have no problem copying/printing legal (8.5 x 14) size documents with that all-in-one unit. So I assumed it should be able to send the image it collected to my Adobe Acrobat program instead of to the printer. Am I missing something? Or should I put the question to HP instead of Adobe?

  • HP Officejet Pro 8610 Printer Not Printing

    I have been using my Officejet Pro for about a week now, and it has been working great! I have set up my e-print, successfully printed from a phone...all wirelessly.  Randomly, the printer stopped printing. It is still connected to the network, and I can actually scan documents from the printer direclty to my computer and to my email, it just wont print from my computer to the printer wirelessly anymore. It still works if I connect a USB, but just not wirelessly.  I have restarted both my printer and computer, re-configured the wireless settings, and instaled the HP Doctor that stated that it could not find any issues with the printer.  I don't get a message or anything, but when I go to the control panel and click on my printer, it says 1 document "error".  Help!  I work remotely and need a wireless printer due to lack of office space. Any suggestions?   

    John,
    Thanks for your response to my query about printing problems on an HP Officejet Pro K550 printer since upgrading to Mountain Lion.  I usually use the Duplex printing on two sides of the paper. I use A4 size paper (am based in UK); if I substantially increase the footer margins I get printing on all pages. Maybe something to do with the way the printer handles the paper in and out for two-sided printing, although you would expect the problem to then be printing on even pages, not odd. Prior to Mountain Lion, there was no problem in printing footers, but this might just be a coincidence, and it might be the printer on the blink.
    I generally only use Microsoft Office 2011 and Adobe Acrobat Pro X version 10.1.4
    Mike

  • Officejet Pro 8610 print job positioning

    Hi, we have just purchased  Officejet Pro 8610  for our business primarily to print our shop invoice with dilivery address sticker quickly. We had tried 2 cheap Canon printers before hand but they had after a few months.
    I had to adjust the template to suit the new hp printer but it is still not positioning correctly on the paper. The space at the top of the page, prints randomly up and down not repeating accuretly enough.
    The frustrating thing is the cheap canons had no problems with this accurate within a 2mm. Iwe are struggling to get an accuracy of 10mm with this professional printer.
    Any help appreciated.
    Steve
    This question was solved.
    View Solution.

    Hi Chaptan, thanks for the reply!
    What margin settings are you trying to reach?
    Below I have included the margin specs for this printer:
    Media 1. Left (LM) 2. Right (RM) 3. Top (TM) 4. Bottom (BM)*
    U.S. Letter
    U.S. Legal
    A4 
    U.S. Statement
    8.5 x 13 inch
    Customized media
    Photo media
    U.S. Executive
    B5
    A5
    Cards
    Custom-sized media
    Photo media
    3.3 mm (0.13 inch)
    3.3 mm (0.13 inch)
    3.3 mm (0.13 inch)
    Windows: 3.3 mm (0.13 inch) 
    Macintosh and Linux: 12 mm (0.47 inch)
    Envelopes
    3.3 mm (0.13 inch)
    3.3 mm (0.13 inch)
    16.5 mm (0.65 inch)
    16.5 mm (0.65 inch)
    *To achieve these margin settings on a computer running Windows, click the Advanced tab in the print driver, and then select Minimize Margins.
    Please let me know!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Add second computer to "Scan to" on HP Pro 8610

    Pro 8610 is networked with 2 PCs. Only one of the PCs shows up in the "Scan to" screen on the printer control panel.  How do I add the second PC as a "scan to" option?

    Hi,
    From other computer (which is not on the list), enable scan to computer option. For Windows:
    Double click printer icon on desktop,
    Click Manage Scan to computer,
    Enable it, also start with Windows
    Click Apply and Save
    Regrads
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Scanning legal size document on HP 6520

    How do I scan a legal size document on my new HP Photosmart 6520? Glass size is letter size. Is there a document feeder above the paper tray? Not working so far. Thank you.

    Hello kurebeach1,
    Welcome to the HP Support Forums! I understand you would like to do legal size scanning on your HP Photosmart 6520. After checking the HP Photosmart 6520 Product Specifications, the biggest scanning size is 8.5 x 11inches, the PS 6520 does not support legal size scanning.
    See image below:
    I hope this answers your question!
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Officejet Pro 8610 printing envelopes from MS Word on MacBook Pro

    I have Officejet Pro 8610 that will not print envelopes from MS Word envelopes. Print preview shows all white. I've played with as many settings as I can find. Yesterday, tech support got it to print from pdf, but today it doesn't even do that.
    This question was solved.
    View Solution.

    I deleted the printer in Mac system preferences, reset, then reloaded the printer driver using officejet rather than airprint. Works OK. Thanks.

  • I have an early 2008 iMac running iOs 10.5.8. I need to upgrade to at least iOs 10.6 snow leopard in order to install the driver for a new HP Office Jet Pro 8610 printer. How do I go about doing this, and which version of 10.6 would be best?

    I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?

    Click here and buy the DVD.
    (115929)

  • Black Bar keeps appearing on scans on my Officejet Pro 8610

    I've tried scanning using both the scanner and the document feeder and a large black bar keeps appearing on the side of the page blocking half the document. This happens when I connect to my computer and when I plug in a USB directly to the printer. It is plugged directly into a wall point and I have reset the printer but nothing has changed.  Any assistance would be appreciated. 

    Hi,
    Looks like you can only do this if you start to scan from a computer (not from printer]. From computer, you have more choices under "Document to file" including option to select Black & White or Color.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Jump to BP transaction from bex query

    Hello all, the client I´m working for wants to jump from a bex query to BP crm transaction. I implemented that using RSBBS transaction, but when I execute the query --> Right mouse click --> Go to --> transaction (BP) system goes to a web page; The i

  • Can't run programs or save?

    Trying to update some programs of mine and I am unable to. I click on the item to download and it comes up "Save or Run" and no matter what I click on it will act like its downloading and then it disappears. Nothing saves and nothing runs. Any help p

  • Discoverer and Oracle apps

    Can someone pls tell me how different the resulting output can be when connected to an apps database as a native database user instead of an apps user in Oracle discoverer. Cheers

  • Dependent req in md04

    Hi, the bom of finish consist of a raw materail. strategy 40 maintained for both materials. sales oder created and mrp run md02 taken place. in md04 for finish product planed order generated for sales order qty. for raw material also pr generated for

  • UWL Workitems from different Systems in a sequence

    Hi , is it possible to show UWL items in a sequence from different systems. I mean if i have a workitem   xx coming from system ABC and another YY coming from DEF it must appear in UWL as xx YY Please let me know is it possible and what is the proced