Scarmble data after clone

Hi All,
Does anyone has information regarding how to scramble the data after eBiz R12 cloning.
Thanks for your help.

Hi
Does anyone has information regarding how to scramble the data after eBiz R12 cloning.What do you mean? What u are asking exactly. If you took one clone its mean you have same system as your source. Its mean you can do whatever you want on your new clone system as what you are doing on your source system.
If you ask about performance it has some performance (if you have same hardware like cpu etc)
Please check below and see its helpful:
Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12
FAQ: Cloning Oracle Applications Release 11i http://ID 216664.1
Descriptive Checklist for performing Rapid Clone with 11i/R12 http://ID 811715.1
Regard
Helios

Similar Messages

  • Re-loading data after upgrade from OS X 10.4 to OS X 10.5

    I cannot install OS X 10.5 over the top of 10.4 because I have upgraded the hard drive in my Macbook. Can I create a bootable version of my hardrive on an external drive and then transfer that data after I upgrade to 10.5? I am wondering if the fact that my bootable drive would have 10.4 on it would cause problems.

    Hello ctj19, and a warm welcome to the forums!
    Can I create a bootable version of my hardrive on an external drive...
    Yes, Get carbon copy cloner to make an exact copy of your old HD to the New one...
    http://www.bombich.com/software/ccc.html
    ... and then transfer that data after I upgrade to 10.5?
    Yes, in fact as soon as you install Leopard/10.5 & reboot to it, Migration Assistant will open & ask if you want to import Users, APPs & such from another drive or Mac, choose yes.
    I am wondering if the fact that my bootable drive would have 10.4 on it would cause problems.
    No problem, in fact you could choose which Drive & which OS you wanted to boot from, & back & forth.
    Message was edited by: BDAqua

  • Retain responsibilities after clone

    Hi All,
    My requirement is to retain all the responsibilities of all users in a cloned instance as how they are before clone.
    I am on 12.1.3 . I think I can do it by export/import of some tables or using FNDLOAD . I am looking to find the easiest way to do so , any suggestions are of great help.

    I am not sure if i am getting you...
    I need to retain the responsibilities at target as how they are before clone. same resp will be their in system after clone too..cloning means same data..in oracle everything is in form of data stored in tables so if data is not changed then how will resp be?
    I am sorry if i am not getting you...pls give a example if possible.
    Thanks,
    JD

  • Can not pass data after while loop

    Hello.
    I have created a VI for my experiment and am having problem passing data outside a while loop to save on an excel file. The VI needs to first move a probe radially, take data at 1mm increment, then move axially, take data radially at 1mm increment, then move to the next axial position and repeat. It would then export these data to an excel file. The VI is a little complicated but it's the only way I know how to make it for our experiment. I have tested it and all the motion works correctly, however I can not get it to pass the data after the last while loop on the far right of the VI where I have put the arrows (Please see the attached VI ). Is it because I'm using too many sequence, case, and while loops?  If so, what other ways can I use to make it export data to the excel file?
    Any help would be appreciated. 
    Thank you,
    Max
    Attachments:
    B.Dot.Probe.Exp.vi ‏66 KB

    Ummmm .... gee, I'm not even sure where to begin with this one. Your VI is well .... ummmm... You have straight wires! That's always nice to see. As for everything else. Well... Your fundamental problem is lack of understanding of dataflow programming. What you've created is a text program. It would look fantastic in C. In LabVIEW it makes my heart break. For a direct answer to your question: Data will not show up outside a while loop until the while loop has completed. This means your most likely problem is that the conditions to stop that specific loop are not being met. As for what the problem is, I don't even want to start debugging this code. Of course, one way to pass data outside of loops is with local variables, and hey, you seem to be having so much fun with those, what's one more?
    This may sound harsh, and perhaps be somewhat insulting, but the brutal truth is that what I would personally do is to throw it out and to start using a good architecture like a state machine. This kind of framework is easy to code, easy to modify, and easy to debug. All qualities that your code seems to lack.
    Message Edited by smercurio_fc on 08-17-2009 10:00 PM

  • The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

     We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
      [ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. 
     The PrimeOutput method on ADO NET Source returned error code 0xC02090F5. 
     The component returned a failure code when the pipeline engine called PrimeOutput(). 
    The meaning of the failure code is defined by the component, 
    but the error is fatal and the pipeline stopped executing. 
     There may be error messages posted before this with more 
    information about the failure.
    Anything that we can do to fix this?

    Hi,
      Tried both....
      * Having schema type as Nvarchar(max). - Getting the same error.
      * Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
           [OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
           [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.  The PrimeOutput method on OLE DB Source returned error code 0xC0202009.  The component returned a failure
    code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.  There may be error messages posted before this with more information about the
    failure.
    Additional Info:
       * Here the Source task is getting failed not the conversion or destination task.
    Thanks,
    Loganathan A.

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • How to stored data after clicking checkbox  save in database table

    TYPE-pools: slis.
    tables:mkpf,mseg,mard,COWB_COMP.
    TYPES: BEGIN OF tp_data,
          mblnr LIKE mseg-mblnr,
         matnr LIKE mseg-matnr,
         werks LIKE mard-werks,
         lgort LIKE mard-lgort,
         lgpbe LIKE mard-lgpbe,
         charg LIKE mseg-charg,
         bwart LIKE mseg-bwart,
         budat LIKE mkpf-budat,
         menge LIKE mseg-menge,
         meins LIKE mseg-meins,
         kostl LIKE mseg-kostl,
         aufnr LIKE mseg-aufnr,
         rsnum LIKE mseg-rsnum,
         endkz like COWB_COMP-endkz,
    END OF tp_data,
    tp_tbl_data TYPE STANDARD TABLE OF tp_data.
    *data: t_data like ztable occurs 0 with header line.
    Constants
    Data objects (variable declarations and definitions)
    Report data to be shown.
    DATA: it_data TYPE STANDARD TABLE OF tp_data.
    Heading of the report.
    DATA: t_heading TYPE slis_t_listheader.
    ========================== Selection Screen ==========================
      SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
                   smatnr FOR mseg-matnr MODIF ID m2,
                   swerks FOR mard-werks MODIF ID m3,
                   slgort FOR mard-lgort MODIF ID m4,
                   slgpbe FOR mard-lgpbe MODIF ID m5,
                   scharg FOR mseg-charg MODIF ID m6,
                   sbwart FOR mseg-bwart MODIF ID m7,
                   skostl FOR mseg-kostl MODIF ID m8,
                   saufnr FOR mseg-aufnr MODIF ID m9,
                   srsnum FOR mseg-rsnum MODIF ID m10.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
               pse RADIOBUTTON GROUP radi,
               bps RADIOBUTTON GROUP radi.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETER:layout TYPE i.
    SELECTION-SCREEN END OF BLOCK b3.
    =========================== Event Blocks =============================
    AT selection-SCREEN.
    start-OF-selection.
    PERFORM get_data USING it_data.
    END-OF-selection.
    PERFORM build_alv USING it_data t_heading.
    =========================== Subroutines ==============================
    *&      Form  get_data
          Gets the information to be shown in the report.
    FORM get_data USING t_data TYPE tp_tbl_data.
      SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
        msegmenge  msegmeins msegkostl msegaufnr mseg~rsnum
      INTO CORRESPONDING FIELDS OF TABLE t_data
      FROM mseg
      JOIN mard ON mardmatnr EQ msegmatnr
                   JOIN mkpf ON msegmblnr EQ mkpfmblnr
                   WHERE mseg~matnr IN smatnr.
    ENDFORM.                    " get_data
    *&      Form  build_alv
          Builds and display the ALV Grid.
    FORM build_alv USING t_data TYPE tp_tbl_data
          t_heading  TYPE slis_t_listheader.
    ALV required data objects.
      DATA: w_title   TYPE lvc_title,
            w_comm    TYPE slis_formname,
            w_status  TYPE slis_formname,
            x_layout  TYPE slis_layout_alv,
            t_event    TYPE slis_t_event,
            t_fieldcat TYPE slis_t_fieldcat_alv,
            t_sort     TYPE slis_t_sortinfo_alv.
      REFRESH t_fieldcat.
      REFRESH t_event.
      REFRESH t_sort.
      CLEAR x_layout.
      CLEAR w_title.
    Field Catalog
      PERFORM set_fieldcat2 USING:
            1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
            2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space  t_fieldcat ,
            3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space  t_fieldcat,
            4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
            5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
            6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
            7 'BWART' 'BWART' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            8 'BUDAT' 'BUDAT' 'MKPF' space  space space space space space space space space space space space t_fieldcat,
            9 'MENGE' 'MENGE' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            10 'MEINS' 'MEINS' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            11 'KOSTL' 'KOSTL' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            12 'AUFNR' 'AUFNR' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            13 'RSNUM' 'RSNUM' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
        14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
    Layout
      x_layout-zebra = 'X'.
    Top of page heading
      PERFORM set_top_page_heading USING t_heading t_event.
    Events
      PERFORM set_events USING t_event.
    GUI Status
      w_status = ''.
    User commands
      w_comm   = 'USER_COMMAND'.
    Order
    Example
    PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
      PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
    Displays the ALV grid
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program       = sy-repid
        it_fieldcat              = t_fieldcat
        is_layout                = x_layout
        it_sort                  = t_sort
        i_callback_pf_status_set = w_status
        i_callback_user_command  = w_comm
        i_save                   = 'X'
        it_events                = t_event
        i_grid_title             = w_title
      TABLES
        t_outtab                 = t_data
      EXCEPTIONS
        program_error            = 1
        OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " build_alv.
    *&      Form  set_top_page_heading
          Creates the report headings.
    FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
          t_events  TYPE slis_t_event.
      DATA: x_heading TYPE slis_listheader,
            x_event   TYPE LINE OF slis_t_event.
    Report title
      CLEAR t_heading[].
      CLEAR x_heading.
      x_heading-typ = 'H'.
      x_heading-info = 'Reporte Prueba'(001).
      APPEND x_heading TO t_heading.
    Program name
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Program: '.
      x_heading-info = sy-repid.
      APPEND x_heading TO t_heading.
    User who is running the report
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'User: '.
      x_heading-info = sy-uname.
      APPEND x_heading TO t_heading.
    Date of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Date: '.
      WRITE sy-datum TO x_heading-info.
      APPEND x_heading TO t_heading.
    Time of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Time: '.
      WRITE sy-uzeit TO x_heading-info.
      APPEND x_heading TO t_heading.
    Top of page event
      x_event-name = slis_ev_top_of_page.
      x_event-FORM = 'TOP_OF_PAGE'.
      APPEND x_event TO t_events.
    ENDFORM.
    *&      Form  set_events
          Sets the events for ALV.
          The TOP_OF_PAGE event is alredy being registered in
          the set_top_page_heading subroutine.
    FORM set_events USING t_events TYPE slis_t_event.
      DATA: x_event   TYPE LINE OF slis_t_event.
    Example
    clear x_event.
    x_event-name = .
    x_event-form = .
    append x_event to t_event.
    ENDFORM.
    *&      Form  set_order
          Adds an entry to the order table.
    FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
          t_sort TYPE slis_t_sortinfo_alv.
      DATA: x_sort TYPE slis_sortinfo_alv.
      CLEAR x_sort.
      x_sort-fieldname = p_fieldname.
      x_sort-tabname   = p_tabname.
      x_sort-UP = p_up.
      x_sort-down = p_down.
      x_sort-subtot = p_subtot.
      APPEND x_sort TO t_sort.
    ENDFORM.                    "set_order
    *&      Form  set_fieldcat2
          Adds an entry to the field catalog.
    FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
          p_outputlen p_noout
          p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
          p_hotspot p_showasicon p_checkbox p_edit
          p_dosum
          t_fieldcat TYPE slis_t_fieldcat_alv.
      DATA: wa_fieldcat TYPE slis_fieldcat_alv.
      CLEAR wa_fieldcat.
    General settings
      wa_fieldcat-fieldname = p_fieldname.
      wa_fieldcat-col_pos = p_colpos.
      wa_fieldcat-no_out = p_noout.
      wa_fieldcat-HOTSPOT = p_hotspot.
      wa_fieldcat-CHECKBOX = p_checkbox.
      wa_fieldcat-ICON = p_showasicon.
      wa_fieldcat-do_sum = p_dosum.
    Set reference fieldname, tablenam and rollname.
    If p_ref_tabname is not given, the ref_fieldname given is a data element.
    If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
      IF p_ref_tabname IS INITIAL.
        wa_fieldcat-rollname =   p_ref_fieldname.
      ELSE.
        wa_fieldcat-ref_tabname = p_ref_tabname.
        IF p_ref_fieldname EQ space.
          wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
        ELSE.
          wa_fieldcat-ref_fieldname =   p_ref_fieldname.
        ENDIF.
      ENDIF.
    Set output length.
      IF NOT p_outputlen IS INITIAL.
        wa_fieldcat-outputlen = p_outputlen.
      ENDIF.
    Set text headers.
      IF NOT p_seltext_m IS INITIAL.
        wa_fieldcat-seltext_m = p_seltext_m.
      ENDIF.
      IF NOT p_seltext_l IS INITIAL.
        wa_fieldcat-seltext_l = p_seltext_l.
      ENDIF.
      IF NOT p_seltext_s IS INITIAL.
        wa_fieldcat-seltext_s = p_seltext_s.
      ENDIF.
      IF NOT p_reptext_ddic IS INITIAL.
        wa_fieldcat-reptext_ddic = p_reptext_ddic.
      ENDIF.
      IF NOT p_ddictxt IS INITIAL.
        wa_fieldcat-ddictxt = p_ddictxt.
      ENDIF.
    Set as editable or not.
      IF p_edit IS NOT INITIAL.
        wa_fieldcat-INPUT     = 'X'.
        wa_fieldcat-EDIT     = 'X'.
      ENDIF.
      APPEND wa_fieldcat TO t_fieldcat.
    ENDFORM.                   "set_fieldcat2
    =========================== Subroutines called by ALV ================
    *&      Form  top_of_page
          Called on top_of_page ALV event.
          Prints the heading.
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        i_logo             = 'XXXXX'
        it_list_commentary = t_heading.
    ENDFORM.                    " alv_top_of_page
    *&      Form  user_command
          Called on user_command ALV event.
          Executes custom commands.
    FORM user_command USING r_ucomm     LIKE sy-ucomm
          rs_selfield TYPE slis_selfield.
    ENDFORM.                    "user_command
    this is my code, how to store data after clicking checkbox in databasetable,
    how to write that cide.
    plz send me code.

    hi!,
    use MODIFY to update data into the data base table.
    regards
    anjali

  • How is the best way to read data from an iphone if you lost your itunes data after a crash?

    How is the best way to read data from an iphone if you lost your itunes data after a crash?

    How is the best way to read data from an iphone if you lost your itunes data after a crash?

  • How-To "Refresh a table of data after inserting or deleting"

    I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
    (http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
    I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
    While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
    You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
    You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
    Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
    I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
    In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
    It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
    Priit

    Hi
    Thanks for your infos.
    Yes exactly I use almost the same code you have post here.
    Could You answer to my next questions?
    First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
    Code in backing_bean is and comments on difference to Your code is below:
    public commandButton2_action1(){
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding =
    bindings.getOperationBinding("removeEntity");
    Object result = operationBinding.execute();
    if (!operationBinding.getErrors().isEmpty()) {
    return null;
    //above remove entity, but I dont now if it do commit to database? So i do it below
    OperationBinding commit1 = bindings.getOperationBinding("Commit");
    commit1.execute();
    //and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
    OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
    requery.execute();
    return null;
    Page Definition code for this:
    <methodAction id="findAllRezerwacja1"
    InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
    RequiresUpdateModel="true" Action="999"
    ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
    <table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
    <AttrNames>
    <Item Value="dataDo"/>
    <Item Value="dataOd"/>
    <Item Value="idRezerwacja"/>
    <Item Value="liczbaUczestnikow"/>
    <Item Value="prowadzacy"/>
    <Item Value="uwagi"/>
    </AttrNames>
    </table>
    <methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" MethodName="removeEntity"
    RequiresUpdateModel="true" Action="999">
    <NamedData NDName="entity"
    NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
    NDType="java.lang.Object"/>
    </methodAction>
    <action id="Commit" IterBinding="findAllRezerwacja1Iter"
    InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" RequiresUpdateModel="true"
    Action="2"/>
    </bindings>
    //and rest of code for Iterator etc
    My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
    JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
    Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
    Thanks

  • How can i get back my data after i restored my iphone and accidentally created a new iphone ac.

    how can i get back my data after i restored my iphone and accidentally created a new iphone ac.
    it did a back up when i started my restored iphone and i cant retrieve my previous backup while i didnt back up on icloud....
    the new ac is actually the same apple id as the one i used. I lost all my contact, photos and data of whatsapp...
    what can i do...help!

    I don't know if this is a similar problem but I wrote 2 notes yesterday on my iphone. I opened my mail to print them and they appeared as notes but wouldn't load. Then I looked at them on my iphone and I could see the notes but they quickly updated to blank with a time of the last edit the same time I tried opening them on my computer.
    Yesterday I updated to 4.3.4  I don't know if somehow that affected them. Are they stored somewhere else. Can I get them back?

  • I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?

    I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?
    I havent' took any backup of my notes in icloud. The moment I enter the password after restore my notes will be empty. The only option to get notes back is that after restore skip entering icloud password. But any time I enter icloud password anywhere again my notes will be empty. I have huge data saved in my notes. Apple need to look into this issues very seriously. This is the 5th time I restoring my iphone today just to get my note back.

    I have the issue with losing all my notes and I don't even know why.  I can't remember changing any email account info.  What happened to them?
    Ipad 3rd io7
    Please Help!
    Thank you,
    S.

  • How to restore my iPhone data after mixed with my husband iTunes

    how to restore my iPhone data after mixed with my husband iTunes

    You might what to say what data you have mixed and where.

  • Error reading data after submit.

    Hi All,
    I have a problem getting some data after i submit a standard report FPO4.
    Here the issue is with a file that is getting created by a dynamic report created and called internally by a report on the same path every time dynamically. say (/devabap/if/out/XXXX.0 for the first time and the next time we run the report file name would be /devabap/if/out/XXXX.1 etc.2,3,4,5,). I am now using the FM: FILE_GET_NAME to get the name and then proceeding further to get my output.
    But when i am trying to use the above function module for a single run i am getting the correct result as ther is only one file present in the path.If i run the same report with different variants parallely in background then in the application server there are there are two or more files already created for two different run's as said above ( .0 and .1) the logic is such that i have to get the latest file and so a wrong file is getting picked up at the time of parallel run.
    Note: When i Submit the transaction the ouput screen along with the data contains the File path & File Name as said above.I am trying to get the file name from the submit screen as the file is generated dynamically. For change in the instance (run) again there will be change in the file name. So system is not identifying the correct file. The dynamic program that is getting created and placing the file in the path is opened in another session (NEW) and hence i am not a ble to use any of the methods like ( SET/GET Parameters) also the IMPORT/EXPORT statements.
    The flow of the execution is (Program A --> Standard Transaction B --> Dynamically created Program C --> File is getting created) . Here i want the file name that program c is creating in my zprogram A.
    Could any one please advise?
    Regards,
    Vijay

    Hi All,
    I have a problem getting some data after i submit a standard report FPO4.
    Here the issue is with a file that is getting created by a dynamic report created and called internally by a report on the same path every time dynamically. say (/devabap/if/out/XXXX.0 for the first time and the next time we run the report file name would be /devabap/if/out/XXXX.1 etc.2,3,4,5,). I am now using the FM: FILE_GET_NAME to get the name and then proceeding further to get my output.
    But when i am trying to use the above function module for a single run i am getting the correct result as ther is only one file present in the path.If i run the same report with different variants parallely in background then in the application server there are there are two or more files already created for two different run's as said above ( .0 and .1) the logic is such that i have to get the latest file and so a wrong file is getting picked up at the time of parallel run.
    Note: When i Submit the transaction the ouput screen along with the data contains the File path & File Name as said above.I am trying to get the file name from the submit screen as the file is generated dynamically. For change in the instance (run) again there will be change in the file name. So system is not identifying the correct file. The dynamic program that is getting created and placing the file in the path is opened in another session (NEW) and hence i am not a ble to use any of the methods like ( SET/GET Parameters) also the IMPORT/EXPORT statements.
    The flow of the execution is (Program A --> Standard Transaction B --> Dynamically created Program C --> File is getting created) . Here i want the file name that program c is creating in my zprogram A.
    Could any one please advise?
    Regards,
    Vijay

  • How to save data after clicking checkbox stored in databasetable

    TYPE-pools: slis.
    tables:mkpf,mseg,mard.
    TYPES: BEGIN OF tp_data,
          mblnr LIKE mseg-mblnr,
         matnr LIKE mseg-matnr,
         werks LIKE mard-werks,
         lgort LIKE mard-lgort,
         lgpbe LIKE mard-lgpbe,
         charg LIKE mseg-charg,
         bwart LIKE mseg-bwart,
         budat LIKE mkpf-budat,
         menge LIKE mseg-menge,
         meins LIKE mseg-meins,
         kostl LIKE mseg-kostl,
         aufnr LIKE mseg-aufnr,
         rsnum LIKE mseg-rsnum,
         checkbox TYPE c,
      __mark,
    END OF tp_data,
    tp_tbl_data TYPE STANDARD TABLE OF tp_data.
    Constants
    Data objects (variable declarations and definitions)
    Report data to be shown.
    DATA: it_data TYPE STANDARD TABLE OF tp_data.
    Heading of the report.
    DATA: t_heading TYPE slis_t_listheader.
    ========================== Selection Screen ==========================
      SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
                   smatnr FOR mseg-matnr MODIF ID m2,
                   swerks FOR mard-werks MODIF ID m3,
                   slgort FOR mard-lgort MODIF ID m4,
                   slgpbe FOR mard-lgpbe MODIF ID m5,
                   scharg FOR mseg-charg MODIF ID m6,
                   sbwart FOR mseg-bwart MODIF ID m7,
                   skostl FOR mseg-kostl MODIF ID m8,
                   saufnr FOR mseg-aufnr MODIF ID m9,
                   srsnum FOR mseg-rsnum MODIF ID m10.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
               pse RADIOBUTTON GROUP radi,
               bps RADIOBUTTON GROUP radi.
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETER:layout TYPE i.
    SELECTION-SCREEN END OF BLOCK b3.
    =========================== Event Blocks =============================
    AT selection-SCREEN.
    start-OF-selection.
    PERFORM get_data USING it_data.
    END-OF-selection.
    PERFORM build_alv USING it_data t_heading.
    =========================== Subroutines ==============================
    *&      Form  get_data
          Gets the information to be shown in the report.
    FORM get_data USING t_data TYPE tp_tbl_data.
      SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
        msegmenge  msegmeins msegkostl msegaufnr mseg~rsnum
      INTO CORRESPONDING FIELDS OF TABLE t_data
      FROM mseg
      JOIN mard ON mardmatnr EQ msegmatnr
                   JOIN mkpf ON msegmblnr EQ mkpfmblnr
                   WHERE mseg~matnr IN smatnr.
    ENDFORM.                    " get_data
    *&      Form  build_alv
          Builds and display the ALV Grid.
    FORM build_alv USING t_data TYPE tp_tbl_data
          t_heading  TYPE slis_t_listheader.
    ALV required data objects.
      DATA: w_title   TYPE lvc_title,
            w_comm    TYPE slis_formname,
            w_status  TYPE slis_formname,
            x_layout  TYPE slis_layout_alv,
            t_event    TYPE slis_t_event,
            t_fieldcat TYPE slis_t_fieldcat_alv,
            t_sort     TYPE slis_t_sortinfo_alv.
      REFRESH t_fieldcat.
      REFRESH t_event.
      REFRESH t_sort.
      CLEAR x_layout.
      CLEAR w_title.
    Field Catalog
      PERFORM set_fieldcat2 USING:
            1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
            2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space  t_fieldcat ,
            3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space  t_fieldcat,
            4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
            5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
            6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
            7 'BWART' 'BWART' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            8 'BUDAT' 'BUDAT' 'MKPF' space  space space space space space space space space space space space t_fieldcat,
            9 'MENGE' 'MENGE' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            10 'MEINS' 'MEINS' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            11 'KOSTL' 'KOSTL' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            12 'AUFNR' 'AUFNR' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            13 'RSNUM' 'RSNUM' 'MSEG' space  space space space space space space space space space space space t_fieldcat,
            14 '__MARK' 'XFELD' space space space 'Select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
    Layout
      x_layout-zebra = 'X'.
    Top of page heading
      PERFORM set_top_page_heading USING t_heading t_event.
    Events
      PERFORM set_events USING t_event.
    GUI Status
      w_status = ''.
    User commands
      w_comm   = 'USER_COMMAND'.
    Order
    Example
    PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
    PERFORM set_order USING 'LIFNR' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
    PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
    Displays the ALV grid
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program       = sy-repid
        it_fieldcat              = t_fieldcat
        is_layout                = x_layout
        it_sort                  = t_sort
        i_callback_pf_status_set = w_status
        i_callback_user_command  = w_comm
        i_save                   = 'X'
        it_events                = t_event
        i_grid_title             = w_title
      TABLES
        t_outtab                 = t_data
      EXCEPTIONS
        program_error            = 1
        OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
        WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " build_alv.
    *&      Form  set_top_page_heading
          Creates the report headings.
    FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
          t_events  TYPE slis_t_event.
      DATA: x_heading TYPE slis_listheader,
            x_event   TYPE LINE OF slis_t_event.
    Report title
      CLEAR t_heading[].
      CLEAR x_heading.
      x_heading-typ = 'H'.
      x_heading-info = 'Reporte Prueba'(001).
      APPEND x_heading TO t_heading.
    Program name
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Program: '.
      x_heading-info = sy-repid.
      APPEND x_heading TO t_heading.
    User who is running the report
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'User: '.
      x_heading-info = sy-uname.
      APPEND x_heading TO t_heading.
    Date of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Date: '.
      WRITE sy-datum TO x_heading-info.
      APPEND x_heading TO t_heading.
    Time of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-KEY = 'Time: '.
      WRITE sy-uzeit TO x_heading-info.
      APPEND x_heading TO t_heading.
    Top of page event
      x_event-name = slis_ev_top_of_page.
      x_event-FORM = 'TOP_OF_PAGE'.
      APPEND x_event TO t_events.
    ENDFORM.
    *&      Form  set_events
          Sets the events for ALV.
          The TOP_OF_PAGE event is alredy being registered in
          the set_top_page_heading subroutine.
    FORM set_events USING t_events TYPE slis_t_event.
      DATA: x_event   TYPE LINE OF slis_t_event.
    Example
    clear x_event.
    x_event-name = .
    x_event-form = .
    append x_event to t_event.
    ENDFORM.
    *&      Form  set_order
          Adds an entry to the order table.
    FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
          t_sort TYPE slis_t_sortinfo_alv.
      DATA: x_sort TYPE slis_sortinfo_alv.
      CLEAR x_sort.
      x_sort-fieldname = p_fieldname.
      x_sort-tabname   = p_tabname.
      x_sort-UP = p_up.
      x_sort-down = p_down.
      x_sort-subtot = p_subtot.
      APPEND x_sort TO t_sort.
    ENDFORM.                    "set_order
    *&      Form  set_fieldcat2
          Adds an entry to the field catalog.
    FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
          p_outputlen p_noout
          p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
          p_hotspot p_showasicon p_checkbox p_edit
          p_dosum
          t_fieldcat TYPE slis_t_fieldcat_alv.
      DATA: wa_fieldcat TYPE slis_fieldcat_alv.
      CLEAR wa_fieldcat.
    General settings
      wa_fieldcat-fieldname = p_fieldname.
      wa_fieldcat-col_pos = p_colpos.
      wa_fieldcat-no_out = p_noout.
      wa_fieldcat-HOTSPOT = p_hotspot.
      wa_fieldcat-CHECKBOX = p_checkbox.
      wa_fieldcat-ICON = p_showasicon.
      wa_fieldcat-do_sum = p_dosum.
    Set reference fieldname, tablenam and rollname.
    If p_ref_tabname is not given, the ref_fieldname given is a data element.
    If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
      IF p_ref_tabname IS INITIAL.
        wa_fieldcat-rollname =   p_ref_fieldname.
      ELSE.
        wa_fieldcat-ref_tabname = p_ref_tabname.
        IF p_ref_fieldname EQ space.
          wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
        ELSE.
          wa_fieldcat-ref_fieldname =   p_ref_fieldname.
        ENDIF.
      ENDIF.
    Set output length.
      IF NOT p_outputlen IS INITIAL.
        wa_fieldcat-outputlen = p_outputlen.
      ENDIF.
    Set text headers.
      IF NOT p_seltext_m IS INITIAL.
        wa_fieldcat-seltext_m = p_seltext_m.
      ENDIF.
      IF NOT p_seltext_l IS INITIAL.
        wa_fieldcat-seltext_l = p_seltext_l.
      ENDIF.
      IF NOT p_seltext_s IS INITIAL.
        wa_fieldcat-seltext_s = p_seltext_s.
      ENDIF.
      IF NOT p_reptext_ddic IS INITIAL.
        wa_fieldcat-reptext_ddic = p_reptext_ddic.
      ENDIF.
      IF NOT p_ddictxt IS INITIAL.
        wa_fieldcat-ddictxt = p_ddictxt.
      ENDIF.
    Set as editable or not.
      IF p_edit IS NOT INITIAL.
        wa_fieldcat-INPUT     = 'X'.
        wa_fieldcat-EDIT     = 'X'.
      ENDIF.
      APPEND wa_fieldcat TO t_fieldcat.
    ENDFORM.                   "set_fieldcat2
    =========================== Subroutines called by ALV ================
    *&      Form  top_of_page
          Called on top_of_page ALV event.
          Prints the heading.
    FORM top_of_page.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        i_logo             = 'XXXXX'
        it_list_commentary = t_heading.
    ENDFORM.                    " alv_top_of_page
    *&      Form  user_command
          Called on user_command ALV event.
          Executes custom commands.
    FORM user_command USING r_ucomm     LIKE sy-ucomm
          rs_selfield TYPE slis_selfield.
    Example Code
    Executes a command considering the sy-ucomm.
    CASE r_ucomm.
       WHEN '&IC1'.
         Set your "double click action" response here.
         Example code: Create and display a status message.
         DATA: w_msg TYPE string,
               w_row(4) TYPE n.
         w_row = rs_selfield-tabindex.
         CONCATENATE 'You have clicked row' w_row
                     'field' rs_s lfield-fieldname
                     'with value' rs_selfield-value
                     INTO w_msg SEPARATED BY space.
         MESSAGE w_msg TYPE 'S'.
    ENDCASE.
    End of example code.
    ENDFORM.                    "user_command
    this is mycode,mblnr, matnr and checkbox both field had created in database table
    then save data after clicking checkbox data stored in database table,and next clickin checkboxes are no change. this my requirment.
    plz send me code .

    Try this
    In user_command form...
    LOOP AT IT_DATA.
    IF  CHECKBOX __MARK EQ 'X'.
    write logic wht u want....
    ENDIF.
    ENDLOOP.

  • How to get the previous state of my data after issuing coomit method

    How to get the previous state of some date after issuing commit method in entity bean (It should not use any offline storage )

    >
    Is there any way to get the state apart from using
    offline storage ?As I said the caller keeps a copy in memory.
    Naturally if it is no longer in memory then that is a problem.
    >
    and also what do you mean by auditlog?
    You keep track of every change to the database by keeping the old data. There are three ways:
    1. Each table has a version number/delete flag for each record. A record is never updated nor deleted. Instead a new record is created with a new version number and with the new data.
    2. Each table has a duplicate table which has all of the same columns. When the first table is modified the old data is moved to the duplicate table.
    3. A single table is used which has columns for 'table', 'field', 'data' and 'activity' (update, delete). When a change is made in any table then this table is updated. This is generally of limited useability due to the difficulty in recovering the data.
    All of the above can have a user id, timestamp, and/or additional information which is relevant to the data being changed.
    Note that ALL of this is persisted storage.
    I am not sure what this really has to do with "offline storage" unless you are using that term to refer to backed up data which is not readily available.

Maybe you are looking for