SCCM 2012 R2 CU1 Client updates but not showing in Admin Console

I have updated my 5.00.7958.1000 client to Cumulative Update 1 (KB2938441).  If I look on the client the version now says 5.00.7958.1203.  My admin console when I click on the client still says 5.00.7958.1000. I tried update membership. It has
been a couple days since the update on the one. Another was early this morning.  I have updated using the Patch and software package deployment.  I have used the push installation to upgrade.  In all cases, upgrade works, but in the console
the client versions are not changing and keeps saying version is the same.
Why wouldn't it update by now?  This is crazy the time it is taking to show a new version has been installed/upgraded.
What process needs to happen?  Are there specific logs for this data coming back to the console I can check?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

We are a school district so the majority of our clients are intranet.  Our WAN is connected with Gigabit connections.  Single sccm primary site at center of the hub-n-spoke network topology.  Server running Windows server 2012 w/ 4cpu and
16 GB RAM.  Server running in VMware so we can easily increase spec if needed, so more interested in what the "common" configuration may be so I can test it with those settings first and adjust accordingly. 
We have 3,500 clients, only 800 of which may go home the other stay on network at all times.  A large number of those 3,500 are laptops that are in carts so they are not left on all the time so the different processes need to be somewhat frequent. 
Additionally, it will be almost never that all those machines are on at the same time.  Many could be sitting shutdown in the carts.
Please offer your opinion as to what good settings might be.  I know they may not be perfect, but I can test them out.
Also checking the Client Settings under Administration workspace, I don't see all the same type of actions I do under the Client computer -> control panel -> configuration manager -> Actions tab.  Are these configured elsewhere
or do they all fall under the "hardware inventory" and "software inventory" sections of the Administration -> Client Settings?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

Similar Messages

  • SCCM 2012 Secondary site client's are not doing hardware scan for more than 30 days

    Hi, 
    On our SCCM environment around 2500 active clients mapped for particular secondary site not performed hardware scan for more than 30 days. Can anyone provide suggestion how to fix this. 
    Regards,
    Madhan

    Yes i confirmed it is listing correct MP and software scan is working fine. we have around 8500 machines connected to that site buy only 3000 machines are having this issue. anyone has faced this issue ?
    Only 5000 Computers are supported by a secondary site.
    http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientNumbers
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Prestage content no longer working after SCCM 2012 R2 CU1 update

    I run SCCM 2012 R2 CU1 on a Windows 2008 R2 server.
    I upgraded to CU1 in June, and today is the first time I've attempted to pre-stage a package since then.  After pre-staging my package and getting the content out to the target DP, I went to properties of the DP, checked the box "Enable this
    distribution point for prestage content", then hit Ok.
    Next I went to distribute the content to the DP, however after going thru the wizard, nothing changes.  There is no pending status, waiting on prestage content, that I had seen in the past when doing this task.  I can go in and run the wizard
    again, and the target DP shows up in the list, like I'd never initiated the push before.
    Normal (non-prestaged) distributions work fine.
    In troubleshooting this, I also noticed that I looking at the site status of the target DP, there are no status message entries for since I upgraded to CU1 (for that matter, none of my DP's have any entries since CU1).  I did see a similar issue like
    this in the forums
    http://social.technet.microsoft.com/Forums/en-US/9491c2b1-37e6-46e3-9bb0-c5d673490d8a/component-status-not-updating-since-upgrade-from-sccm2012-sp1-cu3-to-sccm2012-r2?forum=configmanagergeneral but I don't have a backed up stat.mgr\retry inbox, it's empty.
    I think this is related to why I can no longer prestage content, but I can't seem to find a reason for it.  The fixes for R2 CU2 don't mention my issue here either
    Anyone else seeing this?
    Tony

    Hi,
    Please check SmsAdminUI.log and Smsprov.log after you distribute the content to the DP.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Not able to install sccm agent in sccm 2012 servers after cu3 update

    not able to install sccm agent in sccm 2012 servers after cu3 update
    MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
    The error code is 80041002 ,below URl specify fix to uninstall Management point ,but in sccm 2012 secondary site canot unintall management point  ,please help to install agent in config manager servers
    https://blogs.technet.com/b/configurationmgr/archive/2013/11/25/hotfix-quot-error-25150-setup-was-unable-to-register-the-ccm-service-hostingconfiguration-endpoint-quot-when-you-try-to-install-the-client-agent-in-configuration-manager.aspx
    ankith

    Excellent Article!!!!!! Pls check here, Follow the same steps
    http://eskonr.com/2013/09/sccm-configmgr-2012-sp1-cu3-installationcollections-upgrade-clients/
    This too
    http://it.peikkoluola.net/2013/11/18/update-sccm-2012-to-sp1-cu3/
    Thanks, Prabha G

  • Update membership is taking too long to update members in the collection - SCCM 2012 R2 + CU1

    Hi,
    We have a standalone primary site server hierarchy (SCCM 2012 R2 + CU1), Not only with this upgrade.starting from the SCCM 2012 SP1, We had an issue that members in the collections are not being updated as expected (like SCCM 2007).
    I have created about 20+ query based collections with the normal with the "Full schedule" option but not used "Incremental update" option. Also i have observed that after a day or so..members are appearing.
    anyone had solution to this, why this collection update membership in SCCM 2012 is improper?
    Thanks.
    srkr

    Hi Torsten,
    We have about 25 machines in each collection, My collection condition is based on the package (Ex:if the package is not installed on the machine, it will appear in the collection to target the package),
    WQL query looks good, I have used the same logic for all the collections with different package.
    I did not see any error in colleval.log, all the collections are evaluating properly,but I can see .CEP files in COLLEVAL.BOX which has 0 KB size.
    Any Idea?
    srkr

  • New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

    Hi,
    I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400.  But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
    and not 5.00.7804.1400. 
    For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client? 
    Thanks,
    Nick

    Hi,
    Here's some good information to look over:
    http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
    I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
    http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • SCCM 2012 R2 CU1 to CU5?

    Hi,
    We're running SCCM 2012 R2 CU1 now. I wonder what the biggest advantages/reasons would be to upgrade to CU5 (have read some of the release notes but am curious what your opinon is on this topic).
    J.
    Jan Hoedt

    CU4 is the latest cumulative update for R2.
    Organizations should plan to regularly apply cumulative updates to deal with known issues in the product. Remember that the release notes only cover major changes - there are often dozens or more changes not listed in the KB article. Don't wait to experience
    the pain - fix the known issues.
    Here is a description of some of the direct reasons to do CU4:
    http://myitforum.com/myitforumwp/2015/02/02/cu4-for-configmgr-2012-r2-released-pesky-apps-in-osd-bug-squashed/
    I hope that helps,
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you found a bug or want the product to work differently,
    share your feedback.
    <-- If this post was helpful, please click the up arrow or propose as answer.

  • SCCM 2012 SP1 CU1 Exchange connector error

    Hi, I have configured the Exchange connector on SCCM 2012 SP1 CU1 towards an Exchange 2013. I get this error in easdisk.log:
    ERROR: [MANAGED] Invoking cmdlet Get-Recipient failed. Exception: System.Management.Automation.RemoteException: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The
    value "$true" could not be converted to type System.Boolean."~~   at System.Management.Automation.PowerShell.CoreInvoke[TOutput](IEnumerable input, PSDataCollection`1 output, PSInvocationSettings settings)~~   at System.Management.Automation.PowerShell.Invoke(IEnumerable
    input, PSInvocationSettings settings)~~   at System.Management.Automation.PowerShell.Invoke()~~   at Microsoft.ConfigurationManager.ExchangeConnector.Connector.Invoke(PSCommand cmd)
    If I launch the same command (Get-recipient), using the same account SCCM uses, directly in PSRemote on the Exchange server, it works correctly. I tried also to make the account Organization Manager, but same result.
    Any hints?
    thanks,
    David Papini
    MCSA, MCT

    I made a thread about unmanageable devices. I had this error too after updating my environement. In my scenario this particular error only occured after I updated to Exchange 2013 CU1. Therefore I believe this error is an Exchange related bug.
    SCCM 2012 with Exchange 2013 gave me this error:
    ERROR: [MANAGED] Invoking cmdlet Set-ActiveSyncMailboxPolicy failed. Exception: System.Management.Automation.RemoteException: A parameter cannot be found that matches parameter name 'IsDefaultPolicy'.
    SCCM 2012 CU1 with Exchange 2013 gave me the same error:
    ERROR: [MANAGED] Invoking cmdlet Set-ActiveSyncMailboxPolicy failed. Exception: System.Management.Automation.RemoteException: A parameter cannot be found that matches parameter name 'IsDefaultPolicy'.
    SCCM 2012 CU1 with Exchange 2013 CU1 gave me your error:
    ERROR: [MANAGED] Invoking cmdlet Get-Recipient failed.
    Exception: System.Management.Automation.RemoteException: Cannot bind parameter 'Filter' to the target. Exception setting "Filter": "The value "$true" could not be converted to type System.Boolean."

  • Execute report error SCCM 2012 R2 CU1

    Hello guys, my Customer have a SCCM 2012 R2 CU1 all part of SCCM is working exept the reporting.
    I have install the reporting role and the installation succeeded on install but when I run any of the report we have an error:
    Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
    Impossible d'emprunter l'identité de l'utilisateur pour la source de données 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Échec de l'ouverture de session. Vérifiez que le
    nom d'utilisateur et le mot de passe sont corrects. ---> System.Exception: Pour obtenir plus d'informations sur cette erreur, accédez au serveur de rapports sur le serveur local ou activez les erreurs distantes.
    Microsoft.ConfigurationManagement.ManagementProvider.SmsException
    Une erreur s'est produite lors du traitement du rapport.
    Stack Trace:
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    System.Web.Services.Protocols.SoapException
    Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
    Impossible d'emprunter l'identité de l'utilisateur pour la source de données 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Échec de l'ouverture de session. Vérifiez que le
    nom d'utilisateur et le mot de passe sont corrects. ---> System.Exception: Pour obtenir plus d'informations sur cette erreur, accédez au serveur de rapports sur le serveur local ou activez les erreurs distantes.
    Stack Trace:
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    Do you have an idea?

    Yes but, where is the place to add name and password? I have use the same account that I have take to install sccm. I have seted the name when i have installed the report role is it the place you talked?
    Administration/Servers and Site System Roles in feature Reporting Service/Properties/ option: Reporting Services Point Account.

  • SCEP Hotfix 2952678 Included In SCCM 2012 R2 CU1?

    Just installed SCCM 2012 R2 CU1 in my site. 95% of my clients are successfully upgraded and things are running smooth. I noticed that since the upgrade, my SCEP versions are still at 4.4.304.0 instead of the expected 4.5.0216.0. Is there an additional step
    I need to perform after applying the hotfix and upgrading my clients to upgrade my SCEP clients to the latest version specified in
    http://support.microsoft.com/kb/2952678 ? The KB says it's included in CU1.
    Orange County District Attorney

    Hi,
    Here's a good writeup on the topic:
    http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/09/09/using-configuration-manager-automatic-client-upgrade-to-upgrade-to-the-latest-system-center-endpoint-protection-client.aspx?Redirected=true
    Don't retire TechNet! -
    (Don't give up yet - 12,830+ strong and growing)

  • Duplicate Reports after upgrading to SCCM 2012 R2 CU1

    Single Primary Site with SCCM 2012 R2 CU1.
    Upgraded from SCCM 2012 SP1.
    Duplicate Reports after upgrading to SCCM 2012 R2 CU1
    SCCM 2012 R2 CU1
    SQL 2008 SP3 CU 14

    This is known to happen if you modified any of the default reports
    I've seen that happening even in my lab (and and customers) where I am sure that I did not modify them. Just delete them (they should be prefixed with "_").
    Torsten Meringer | http://www.mssccmfaq.de

  • Review and document existing SCCM 2012 R2 CU1 Environment

    What all tools (MS and Non-MS) are available to Review and document existing SCCM 2012 R2 CU1 Environment? I am aware of following:
    SCCM 2012 BPA
    Autodoc (is it still available)
    What all should be included in such a review and recommendations?

    There's also.
    http://www.david-obrien.net/2014/01/30/update-inventory-script-makes-configmgr-life-easier/
    What should such a tool provide? What do you expect from it do to exactly?
    Torsten Meringer | http://www.mssccmfaq.de

  • Photo Uploaded in AD but not showing/visible in Lync 2010 client

    Photo Uploaded in AD but not showing/visible in Lync 2010 client
    bala

    Hi,
    Please also double check the size of the photograph in AD, make sure the size not overtake 48 pixels by 48 pixels, as it has a serious limitation on the size and resolution of the photos: the thumbnailPhoto attribute can only hold a photograph with
    a maximum size of 48 pixels by 48 pixels.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • IPhoto will not initiate. Downloaded update, but not change.  Any help out there?

    iPhoto will not initiate. Downloaded update, but not change.  Any help out there?

    If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • My 5th gen nano will not sync win 7 .says connected but not show in itunes. driver is updated ,working properly ....help

    my 5th gen nano ,has updated driver ,working properly. ipod connected but not showing in itunes ?

    By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Maybe you are looking for