SCCM 2012 R2 Migration - Clients being lost

I am in the process of migrating SCCM 2007 to SCCM 2012 R2. I had about 11 clients that all were working successfully for about a week. As of yesterday all are reporting as Client "No", client type "None" but with the site
code of the 2012 R2 server. If I check the clientlocation log file of one of the clients, I don't see it reporting to the old SCCM server or anything like that. SCEP definitions are still deploying successfully, however I can't deploy any packages
to any of the devices.
Any ideas where I should start looking?
* Edit: A software updates deployment I just made started and is asking for a reboot. However my client in SCCM still shows Client as No, Client type as None. Also, there is no information listed for Policy Request, Heartbeat DDR, Hardware
Scan, Software Scan, Management Point, etc. This information was there as of yesterday morning.

I think I figured this out. I had the 'Clear Install Flag' maintenance task set to run every Tuesday/Wednesday/Sunday between 12AM and 5AM for anything without a heartbeat within the last 4 days. Heartbeat Discovery was configured to only run
once a week. I think it just ended up clearing the install flag on my test clients.

Similar Messages

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

SCCM 2012 DB migration - certificate chain error

Hi all
I am having an issue with migrating an SCCM 2012 database to a new SQL instance that doesn't seem to be uncommon however have had no luck in resolving the issue with what other people have suggested on forums...I have an SCCM 2012 installation which currently
has the site database located on a co-located SQL 2012 instance. I am trying to migrate this database to a different SQL 2012 server with multiple named instances.
I have followed the instructions as per the following article:
http://blogs.technet.com/b/configurationmgr/archive/2013/04/02/how-to-move-the-configmgr-2012-site-database-to-a-new-sql-server.aspx
I have backed up and restored the database to the new instance as per the guide however when running the Configuration Manager Setup Wizard I am getting the following errors:
*** Failed to connect to the SQL Server, connection type: SMS ACCESS. Configuration Manager Setup 22/04/2015 11:51:10 AM 4428 (0x114C)
INFO: SQL Connection failed. Connection: SMS ACCESS, Type: Secure Configuration Manager Setup 22/04/2015 11:51:10 AM 4428 (0x114C)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]SSL Provider: The certificate chain was issued by an authority that is not trusted. Configuration Manager Setup 22/04/2015 11:51:13 AM 4428 (0x114C)
*** [08001][-2146893019][Microsoft][SQL Server Native Client 11.0]Client unable to establish connection Configuration Manager Setup 22/04/2015 11:51:13 AM 4428 (0x114C)
*** Failed to connect to the SQL Server, connection type: SMS ACCESS. Configuration Manager Setup 22/04/2015 11:51:13 AM 4428 (0x114C)
The errors will continue to pop up every 3 seconds for a few minutes before timing out and the wizard errors out.
I have tried as others suggested and performed the following with no luck:
- added the SCCM 2012 service account (account that I'm running the Config Manager wizard as) and computer account to the local administrators group on the SQL server
- given the SCCM 2012 service account (account that I'm running the Config Manager wizard as) sysadmin privileges to the SQL instance
- from our internal CA I've issued a certificate for the SQL server and installed it on both the SQL and SCCM server
- tried exporting the SCCM server cert from the SMS_SITE_COMPONENT_MANAGER\Trusted People store and installed it into the Local Computer\Personal certificate store on the SQL server. Even tried installing it into the MSSQL$INST02\Personal store (INST02 being
the name of the SQL instance)
Articles that I've already referenced to try and fix this however without any luck:
https://social.technet.microsoft.com/Forums/en-US/b5e1fc09-1f09-4de2-93c3-c0261fdda238/the-certificate-chain-was-issued-by-an-authority-that-is-not-trusted-when-migrating-to-sql-2012?forum=configmanagerdeployment#a294676b-d51a-4049-82cf-adde14f9711a
https://social.technet.microsoft.com/Forums/en-US/1726fa9d-a97b-41cb-8531-5a5f7191132e/cant-migrate-sccm-database-to-sql-server-2008-r2-cluster-connection-failed-sms-access?forum=configmanagergeneral
Does anyone have any suggestions? The ideal would solution for me would be to remove the need to use certificates for the connection to the SQL backend if that it at all possible.
Cheers
Brady

At this point I recommend that you connect Microsoft support CSS and ask them how to solve this problem.
IMO you shouldn't need the two certs from your internal CA but you will need the two cert from your site server.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2012 R2 install client error

I have installed SCCM 2012 R2 on server 2008 R2. I tried to deploy the SCCM client to a pc. Below is the error i get from the log file of the PC
<![LOG[==========[ ccmsetup started in process 2892 ]==========]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:9369">
<![LOG[Running on platform X64]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="util.cpp:1809">
<![LOG[Launch from folder C:\Windows\ccmsetup\]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:717">
<![LOG[CcmSetup version: 5.0.7884.1000]LOG]!><time="12:21:29.817-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:723">
<![LOG[In ServiceMain]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:3355">
<![LOG[Running on OS (6.1.7600). Service Pack (0.0). SuiteMask = 256. Product Type = 1]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:2688">
<![LOG[Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1"
thread="1476" file="ccmsetup.cpp:3580">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:3752">
<![LOG[Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:3753">
<![LOG[SslState value: 224]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:4376">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8549">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8564">
<![LOG[CCMHTTPSSTATE:    224]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8582">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8600">
<![LOG[FSP:    ]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8652">
<![LOG[CCMFIRSTCERT:    1]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:8710">
<![LOG[Config file:      C:\Windows\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:4490">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4491">
<![LOG[MSI log file:     C:\Windows\ccmsetup\Logs\client.msi.log]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:4492">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="CHO" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="12:21:29.848-120" date="04-16-2014"
component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4493">
<![LOG[Source List:]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4501">
<![LOG[                  \\TSCCM.testnet.ac.za\SMSClient]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:4508">
<![LOG[                  \\TSCCM.TESTNET.AC.ZA\SMSClient]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:4517">
<![LOG[MPs:]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:4520">
<![LOG[                  TSCCM.testnet.ac.za]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context=""
type="1" thread="1476" file="ccmsetup.cpp:4535">
<![LOG[No version of the client is currently detected.]LOG]!><time="12:21:29.848-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2749">
<![LOG[Updated security on object C:\Windows\ccmsetup\.]LOG]!><time="12:21:29.879-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:9213">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="12:21:29.879-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:9697">
<![LOG[Running as user "SYSTEM"]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:1975">
<![LOG[Detected 118408 MB free disk space on system drive.]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="util.cpp:600">
<![LOG[Checking Write Filter Status.]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2002">
<![LOG[This is not a supported write filter device. We are not in a write filter maintenance mode.]LOG]!><time="12:21:29.895-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:2029">
<![LOG[Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=CHO))']LOG]!><time="12:21:30.020-120" date="04-16-2014" component="ccmsetup" context="" type="0"
thread="1476" file="lsad.cpp:656">
<![LOG[OperationalXml '<ClientOperationalSettings><Version>5.00.7884.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>224</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers></CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>CHO</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=CHO</CommandLine> </CCM><FSP> <FSPServer></FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="testnet.ac.za" /><Forest Value="testnet.ac.za" /></ClientOperationalSettings>']LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="0"
thread="1476" file="lsadcache.cpp:236">
<![LOG[Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1"
thread="1476" file="ccmutillib.cpp:373">
<![LOG[The MP name retrieved is 'TSCCM.testnet.ac.za' with version '7884' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>']LOG]!><time="12:21:30.067-120"
date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="lsadcache.cpp:334">
<![LOG[MP 'TSCCM.testnet.ac.za' is compatible]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="lsadcache.cpp:339">
<![LOG[Retrieved 1 MP records from AD for site 'CHO']LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="lsadcache.cpp:287">
<![LOG[Retrived site version '5.00.7884.1000' from AD for site 'CHO']LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="siteinfo.cpp:575">
<![LOG[SiteCode:         CHO]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2054">
<![LOG[SiteVersion:      5.00.7884.1000]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:2055">
<![LOG[Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.]LOG]!><time="12:21:30.067-120" date="04-16-2014" component="ccmsetup" context="" type="1"
thread="1476" file="ccmsetup.cpp:2089">
<![LOG[Only one MP TSCCM.testnet.ac.za is specified. Use it.]LOG]!><time="12:21:30.113-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:10014">
<![LOG[Searching for DP locations from MP(s)...]LOG]!><time="12:21:30.113-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:10952">
<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="12:21:30.113-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476" file="lsad.cpp:770">
<![LOG[Local Machine is joined to an AD domain]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="lsad.cpp:714">
<![LOG[Current AD forest name is testnet.ac.za, domain name is testnet.ac.za]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476"
file="lsad.cpp:842">
<![LOG[DhcpGetOriginalSubnetMask entry point is supported.]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:117">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1172">
<![LOG[Adapter {7B324A4B-C8EF-4EF2-9862-97959D800C82} is DHCP enabled. Checking quarantine status.]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476"
file="ccmiputil.cpp:436">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="CHO"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="testnet.ac.za"/>
    <Domain Name="testnet.ac.za"/>
    <IPAddresses>
<IPAddress SubnetAddress="192.168.4.0" Address="192.168.4.196"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{989E29EE-9AC7-4153-AE74-BD236430EEFD}</ID><SourceHost>SURVEILANCE</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SURVEILANCE:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>TSCCM.testnet.ac.za</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-16T10:21:30Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1132"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="12:21:30.129-120" date="04-16-2014"
component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://TSCCM.testnet.ac.za/ccm_system/request']LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 404]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'TSCCM.testnet.ac.za'. Error 0x80004005]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476"
file="ccmsetup.cpp:11195">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='101' will not be sent.]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476"
file="ccmsetup.cpp:9697">
<![LOG[Next retry in 10 minute(s)...]LOG]!><time="12:21:30.129-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="ccmsetup.cpp:8767">
<![LOG[Current AD forest name is testnet.ac.za, domain name is testnet.ac.za]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476"
file="lsad.cpp:842">
<![LOG[Domain joined client is in Intranet]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476" file="lsad.cpp:1018">
<![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="1" thread="1476" file="lsad.cpp:770">
<![LOG[DHCP entry points already initialized.]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:75">
<![LOG[Begin checking Alternate Network Configuration]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1095">
<![LOG[Finished checking Alternate Network Configuration]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476" file="ccmiputil.cpp:1172">
<![LOG[Adapter {7B324A4B-C8EF-4EF2-9862-97959D800C82} is DHCP enabled. Checking quarantine status.]LOG]!><time="12:31:30.258-120" date="04-16-2014" component="LocationServices" context="" type="0" thread="1476"
file="ccmiputil.cpp:436">
<![LOG[Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="CHO"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
    <ADSite Name="Default-First-Site-Name"/>
    <Forest Name="testnet.ac.za"/>
    <Domain Name="testnet.ac.za"/>
    <IPAddresses>
<IPAddress SubnetAddress="192.168.4.0" Address="192.168.4.196"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
']LOG]!><time="12:31:30.258-120" date="04-16-2014" component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:96">
<![LOG[Sending message header '<Msg SchemaVersion="1.1"><ID>{E94533DE-45F4-43BC-94EA-F28627212DE4}</ID><SourceHost>SURVEILANCE</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:SURVEILANCE:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>TSCCM.testnet.ac.za</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-04-16T10:31:30Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1132"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>']LOG]!><time="12:31:30.258-120" date="04-16-2014"
component="ccmsetup" context="" type="0" thread="1476" file="siteinfo.cpp:177">
<![LOG[CCM_POST 'HTTP://TSCCM.testnet.ac.za/ccm_system/request']LOG]!><time="12:31:30.258-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="httphelper.cpp:807">
<![LOG[Failed to receive ccm message response. Status code = 404]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476" file="httphelper.cpp:1694">
<![LOG[GetDPLocations failed with error 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="siteinfo.cpp:532">
<![LOG[Failed to get DP locations as the expected version from MP 'TSCCM.testnet.ac.za'. Error 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="2" thread="1476"
file="ccmsetup.cpp:11195">
<![LOG[Failed to find DP locations from MP 'TSCCM.testnet.ac.za' with error 0x80004005, status code 404. Check next MP.]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="2"
thread="1476" file="ccmsetup.cpp:11051">
<![LOG[Only one MP TSCCM.testnet.ac.za is specified. Use it.]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="ccmsetup.cpp:10014">
<![LOG[Have already tried all MPs. Couldn't find DP locations.]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="ccmsetup.cpp:11080">
<![LOG[GET 'HTTP://TSCCM.testnet.ac.za/CCM_Client/ccmsetup.cab']LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1476" file="httphelper.cpp:807">
<![LOG[Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 404)]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476"
file="httphelper.cpp:1013">
<![LOG[DownloadFileByWinHTTP failed with error 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="3" thread="1476" file="httphelper.cpp:1081">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="12:31:30.273-120" date="04-16-2014" component="ccmsetup" context="" type="1" thread="1456" file="ccmsetup.cpp:10813">

From the above log file: "Failed to successfully complete WinHttp request. (StatusCode at WinHttpQueryHeaders: 404)"
404 = Not Found
There are actually multiple 404's in there which leads me to believe your MP is not healthy. Have you reviewed it's health in the console (under the monitoring workspace).
Jason | http://blog.configmgrftw.com

SCCM 2012 DP Migration

Hi Team,
I have 2007 secondary site installed DP and all the package are available.
Q.
1.What are the folders are using at the time of sccm 2012 migration.
2.I seen SMSDPpro.log in DP share and found it importing package.. where it getting package from (don't have PCK file in the local server)?
3. After all the successful of import the very next day i saw in console it showing 65 success and 120 in progress.
When I count the SMSDPProv.log more 150 packages are imported successfully. Why my console giving wrong info.
Thanks

Hi ,
1.What are the folders are using at the time of sccm 2012 migration.
Sorry that I didn't get the point of this question. Do you mean which folder are used on sccm 2012 to copy the content of SCCM 2007 DP packages?
2.I seen SMSDPpro.log in DP share and found it importing package.. where it getting package from (don't have PCK file in the local server)?
The package content is SCCM 2007 flowchart is:
1. When you add a package to a standard Distribution Point, the distmgr component is notified with the packageID.PKN in inboxes\distmgr.box.
2. The distmgr component begins the processing of the package
3. Distmgr establishes a connection to the DP and checks for the SMSPKGdriveletter$ share.
4. It creates a subdirectory with the package ID in the SMSPKGC$ share.
5. Distmgr connects to the packageID folder it created and checks if the drive has the enough free space to copy the package contents:
6. Distmgr sets the security on the
\SMSPKGC$\<PkgID">\\<DP>\SMSPKGC$\<PkgID> folder and copies the package contents to that folder from the package source. It also copies the signature file (TAR file) to the SMSSIG$ share and sets the security on that folder:
7. Distmgr runs the SQL query to update the status in the pkgstatus table in SQL.
For more information, please see:
The end to end flow of distributing a ConfigMgr 2007 package to a standard DP and a Branch DP in a single site environment
http://blogs.technet.com/b/hhoy/archive/2012/05/31/an-adventure-in-the-sccmcontentlib-single-instance-store.aspx
In SCCM 2012 or later, by default, the content is single storage and browsing to a DP does not store all the files in a package id folder where you could find an install and execute it.
For more information, please refer to:
An adventure in the sccmcontentlib - single instance store
http://blogs.technet.com/b/hhoy/archive/2012/05/31/an-adventure-in-the-sccmcontentlib-single-instance-store.aspx
3. After all the successful of import the very next day i saw in console it showing 65 success and 120 in progress.
Refresh the status and close the SCCM console, reopen and see if this helps. If you are using SCCM 2012 Sp1, check this KB
http://support.microsoft.com/kb/2828900. Also check if this technet links helps:
https://social.technet.microsoft.com/Forums/en-US/71b90f35-69de-495c-8f8a-de85ad66b593/sccm-2012-sp1-configuration-manager-client-package-in-progress?forum=configmanagerdeployment
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SCCM 2012 SP1 CU3 - Client Install on SiteServer (PrimarySite)

We have an issue with SCCM 2012 Client deployment on our primary site all other clients are installing correctly the error is attached.
I have tried various ways to install client push even tried the SP1 Client using ccmsetup /source and this also fails at the same point.
I have done self service google and discovered this
http://www.mail-archive.com/[email protected]/msg03811.html
Anyone any ideas????

80041002=
Not found
Source: Windows Management (WMI)
Also, 1603 is a MSI exit code meaning fatal error occurred.
Have you verified you are running the SP1 sccm client and not RTM on the machine is question?
Justin Chalfant | My Blog |
LinkedIn | Please mark as helpful/answer if this resolved your post
Thanks, we have checked the error codes.
We have tested the client install onto the primary server in three different sites, on different networks/labs/environments with the same result.
Yes we have verified we are running SP1 CU3 and that the client files are the correct versions.
To eliminate the probable cause of CU3 updates being at fault, we have obtained the Client folder from the SP1 ISO (the later released updated SP1 ISO), with the exact same error.

SCCM 2012 Secondary site Client Communication for SUP

Hi,
We have an SCCM 2012 Setup and here is the design CAS-->Primary-->Secondary site servers.
SUP is configured for Secondary site too. Boundaries are defined with IP Address Range and is proper.
Some clients are comminicating to Secondary site for updates. Downloading successfully and installing the software.
But some of the clients are communicating to primary site for updates and retain with the status "Downloading update"
I have checked the locationservices.log and it is fluctuating between Primary and secondary MP.
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
I have also checed "DataTransferService.log" and found more errors.
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 5576 (0x15C8)
DTSJob {141CB5AE-8EF2-464D-8D8C-68B868EE7F7B} in state 'DownloadingManifest'. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Failed to send request to /SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4 at host xxxxxxxx.xxxxxxx.com, error 0x2efe DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
[CCMHTTP] ERROR: URL=https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4, Port=443, Options=192, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:0DA907D5-1709-4B10-B627-61E289FD7149";
DateTime = "20130405062159.643000+000";
HostName = "xxxxxxxx.xxxxxxx.com";
HRESULT = "0x80072efe";
ProcessID = 4260;
StatusCode = 600;
ThreadID = 4200;
DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Successfully sent location services HTTPS failure message. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error sending DAV request. HTTP code 600, status '' DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP('https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4') failed with code 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
my query is how some of the clients are communicating primary site server for updates even though the boundary details are properly configured and Secondary site is configured with sup. Also need to know (as per the log "DataTransferService.log")how
come the clients are communicating SSL port for updates. Plz help in resolving the issue.

Hi Kent,
Thanks for the reply.
Primary and secondary sites are connected over WAN and we have around 2000 clients which are reporting to Secondary site.
Considering the WAN bandwidth utiliztaion and number of clients on secondary site we have configured the SUP role.
Not all the clients are with the above error message around 40%-50% of the clients are with above stated error message.
Plz let me know what is the error message indicates and do we need to reffer any other logs for indepth analysis.
Locationservices.log is with fluctuating connectivity
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
how come the clients are communicating SSL port for updates. Plz help in resolving the issue.

SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005

Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.

I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

SCCM 2012 R2 CU2 Clients Will Not Download Anything Using BITS, error 0x801901F4

I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. Clients will not download anything that require BITS transfers. The root of the problem seems to be in the DataTransferService.log. These lines keep appearing over and over:
CDTSJob::HandleErrors DTS Job '(a GUID)' BITS Job '(a GUID)' under user '(SID)' OldErrorCount: 11 NewErrorCount: 12 ErrorCode 0x801901F4 (of course, error counts increment)
CDTSJob:Handlerrors DTS Job = '(GUID matching one above)' URL='http://dpname and package path' ProtType=1
Any input appreciated.
Ben JohnsonWY

Well, I found a problem. LOCAL SERVICE was running the Distribution Points Pool in IIS and Local Service didn't have rights to c:\windows\Microsoft.Net\Framework64\V4.0.30319 on the DP server. Once it did that it cleared up some IIS problems but not this
problem.
0x80070003 seems to mean "path not found". In DataTransferService.log the path it's trying to get to is
http://fullservername:80/sms_dp_smspkg$/abc00012. When I enter that path into a browser URL bar, it displays this info:
date time 50449456
http://fullservername:80/sms_dp_smspkg$/abc0012.2/exe file of patch it's trying to pull.
The clients seem unable to find the path to the patches.
Ben JohnsonWY

Sccm 2012 https workgroup client installation error

Hello everyone,
i got a problem workgroup client installation with PKI.
My SCCM 2012 SP1 hierarchy is:
sccm1.izmir.local = Primary Site Server, FSP, MP, SUP
sccm2.izmir.local = MP,DP (internet FQDN is sccmextmp2.izmir.com)
sccm3.izmir.local = MP,DP, Enrollment Point, Enrollment Proxy Point
sccm4.izmir.local = Reporting Service Point, Application Catalog Web Service Point and Applicaiton Catalog Web Site Point
All MP's and DP's IIS configured with Certificate and client has got certificate too.
i'm using this parameters for installing workgroup client with PKI:
ccmsetup.exe /source:D:\Client /UsePKICert /NoCRLCheck CCMHOSTNAME=sccmextmp2.izmir.com SMSSIGNCERT=D:\Client\sccm1.cert SMSSITECODE=TCP FSP=sccm1.izmir.local CCMALWAYSINF=1 CCMFIRSTCERT=1
and my error is in the ccmsetup.log:
<![LOG[MSI: Action 11:56:36: SmsSetClientConfig. Applies the configuration placed by SmsSetClientConfigInit and configures client framework.]LOG]!><time="11:56:36.673-120" date="02-11-2013" component="ccmsetup" context=""
type="0" thread="5604" file="msiutil.cpp:314">
<![LOG[MSI: Setup failed due to unexpected circumstances
The error code is 80070002]LOG]!><time="11:56:36.719-120" date="02-11-2013" component="ccmsetup" context="" type="3" thread="5604" file="msiutil.cpp:300">
<![LOG[MSI: Action 11:56:36: Rollback. Rolling back action:]LOG]!><time="11:56:36.907-120" date="02-11-2013" component="ccmsetup" context="" type="0" thread="5604" file="msiutil.cpp:314">
<![LOG[File C:\Windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: SmsSetClientConfig.
ErrorMessages:
Setup failed due to unexpected circumstances
The error code is 80070002
]LOG]!><time="11:56:49.886-120" date="02-11-2013" component="ccmsetup" context="" type="3" thread="5604" file="msiutil.cpp:872">
<![LOG[Next retry in 120 minute(s)...]LOG]!><time="11:56:49.948-120" date="02-11-2013" component="ccmsetup" context="" type="0" thread="5604" file="ccmsetup.cpp:8498">
You got any idea?
thanks..
MCT

Hi;
yes i'm using last version of SP1 and applied that hotfix.
By the way i fixed the problem but now i got anothers:) Now i have no errorst in ccmsetup.log. Client agent installed but in Configuration Manager Agent Client certificate:None and Connection Type: Unknown
CertificateMaintenance.log
MCT

SCCM 2012 internet based client mgmt installation in Lab

Hi All
Is it possible to install sccm 2012 WITH INTERNET BASED CLIENT MGMT IN lAB???

Hi,
Short answer: Yes, you can
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCCM 2012 64 Bit Client

Does SCCM 2012 have a 64 bit client? I think that 2007 was only 32 bit but has that changed?

Yes - ConfigMgr 2012 have a native 64 bit client. And you are right - in ConfigMgr 2007 there was only a 32 bit client

SCCM 2012 root domain client management from child domain

Hi All,
We have SCCM 2012 environment in Child domain and we would like to manage the root domain clients as well. we are using https mode. What all configuration do we need to make for root domain clients to monitor successfully from child domain.
Is it mandatory to create System Management container for the Root domain? if yes what all permission i need to give for that System Management container.
Do we need to enable Active directory forest discovery?
Regards,
Bhaskar K

No, you do not need to create the System Management container or publish info into it and no you do not need to enable forest discovery.
ConfigMgr ultimately does not care about AD. AD can be used by clients to help them locate services and configure themselves, but this can also be accomplished in other ways in ConfigMgr.
Jason | http://blog.configmgrftw.com | @jasonsandys

SCCM 2012 and Workgroup clients with PKI

Hi
When i trying to install cmm agent on a workgroup client, does anyone how to solve this porblem.
I got this error
Successfully started the ccmsetup service ccmsetup 2012-09-09 18:49:12 1720 (0x06B8)
Deleted file C:\Windows\ccmsetup\ccmsetup.exe.download ccmsetup 2012-09-09 18:49:12 1720 (0x06B8)
CcmSetup is exiting with return code 0 ccmsetup 2012-09-09 18:49:12 1720 (0x06B8)
Running as user "SYSTEM" ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Detected 16269 MB free disk space on system drive. ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Wmi repository check passed. ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Only one MP https://sc12-cm01.sc12labb.local is specified. Use it. ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Searching for DP locations from MP(s)... ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Unable to retrieve AD site membership LocationServices 2012-09-09 18:49:12 2020 (0x07E4)
Local machine is not a member of an AD domain LocationServices 2012-09-09 18:49:12 2020 (0x07E4)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 2012-09-09 18:49:12 2020 (0x07E4)
Begin checking Alternate Network Configuration LocationServices 2012-09-09 18:49:12 2020 (0x07E4)
Finished checking Alternate Network Configuration LocationServices 2012-09-09 18:49:12 2020 (0x07E4)
Adapter {B30A0ADC-E759-4503-86BD-65C67731818F} is DHCP enabled. Checking quarantine status. LocationServices 2012-09-09 18:49:12 2020 (0x07E4)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="PS1"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0" UseInternetDP="1">
    <ADSite Name=""/>
    <Forest Name=""/>
    <Domain Name=""/>
    <IPAddresses>
<IPAddress SubnetAddress="192.168.10.0" Address="192.168.10.54"/>
    </IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Sending message header '<Msg SchemaVersion="1.1"><ID>{64AC4B5B-D0A3-4DE2-8B81-E66638ABCE52}</ID><SourceHost>TEMPLATE-PC</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:TEMPLATE-PC:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>https://sc12-cm01.sc12labb.local</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2012-09-09T16:49:12Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1036"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
CCM_POST 'https://sc12-cm01.sc12labb.local/ccm_system/request' ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Received header 'NoReply' ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Received reply body 'NoReply' ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
MP did not find any locations matching with the site version. ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
GetDPLocations failed with error 0x80004005 ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Failed to get DP locations as the expected version from MP 'https://sc12-cm01.sc12labb.local'. Error 0x80004005 ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Next retry in 10 minute(s)... ccmsetup 2012-09-09 18:49:12 2020 (0x07E4)
Best regards Andreas

Hi Jason
I got the client in my sccm console right now at least.
The Client certificate is PKI and Connection type is Always Internet, so far so good.
But under Actions tab I only have Machine Policy Retrieval & Evalutation Cycle and User Policy Retrieval & Evalutation. I was to fast, everthing is there now.
Thanks alot for your support Jason, I have used your startup script several times.
Best regards
Andreas
Best regards Andreas

SCCM 2012 R2 CU1 Client updates but not showing in Admin Console

I have updated my 5.00.7958.1000 client to Cumulative Update 1 (KB2938441). If I look on the client the version now says 5.00.7958.1203. My admin console when I click on the client still says 5.00.7958.1000. I tried update membership. It has
been a couple days since the update on the one. Another was early this morning. I have updated using the Patch and software package deployment. I have used the push installation to upgrade. In all cases, upgrade works, but in the console
the client versions are not changing and keeps saying version is the same.
Why wouldn't it update by now? This is crazy the time it is taking to show a new version has been installed/upgraded.
What process needs to happen? Are there specific logs for this data coming back to the console I can check?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

We are a school district so the majority of our clients are intranet. Our WAN is connected with Gigabit connections. Single sccm primary site at center of the hub-n-spoke network topology. Server running Windows server 2012 w/ 4cpu and
16 GB RAM. Server running in VMware so we can easily increase spec if needed, so more interested in what the "common" configuration may be so I can test it with those settings first and adjust accordingly.
We have 3,500 clients, only 800 of which may go home the other stay on network at all times. A large number of those 3,500 are laptops that are in carts so they are not left on all the time so the different processes need to be somewhat frequent.
Additionally, it will be almost never that all those machines are on at the same time. Many could be sitting shutdown in the carts.
Please offer your opinion as to what good settings might be. I know they may not be perfect, but I can test them out.
Also checking the Client Settings under Administration workspace, I don't see all the same type of actions I do under the Client computer -> control panel -> configuration manager -> Actions tab. Are these configured elsewhere
or do they all fall under the "hardware inventory" and "software inventory" sections of the Administration -> Client Settings?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

SCCM 2012 R2 Migration - Clients being lost

Similar Messages

Maybe you are looking for