SCCM 2012 Secondary site client's are not doing hardware scan for more than 30 days

Hi,
On our SCCM environment around 2500 active clients mapped for particular secondary site not performed hardware scan for more than 30 days. Can anyone provide suggestion how to fix this.
Regards,
Madhan

Yes i confirmed it is listing correct MP and software scan is working fine. we have around 8500 machines connected to that site buy only 3000 machines are having this issue. anyone has faced this issue ?
Only 5000 Computers are supported by a secondary site.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientNumbers
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

SCCM 2012 Secondary site Client Communication for SUP

Hi,
We have an SCCM 2012 Setup and here is the design CAS-->Primary-->Secondary site servers.
SUP is configured for Secondary site too. Boundaries are defined with IP Address Range and is proper.
Some clients are comminicating to Secondary site for updates. Downloading successfully and installing the software.
But some of the clients are communicating to primary site for updates and retain with the status "Downloading update"
I have checked the locationservices.log and it is fluctuating between Primary and secondary MP.
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
I have also checed "DataTransferService.log" and found more errors.
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 5576 (0x15C8)
DTSJob {141CB5AE-8EF2-464D-8D8C-68B868EE7F7B} in state 'DownloadingManifest'. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Failed to send request to /SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4 at host xxxxxxxx.xxxxxxx.com, error 0x2efe DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
[CCMHTTP] ERROR: URL=https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4, Port=443, Options=192, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:0DA907D5-1709-4B10-B627-61E289FD7149";
DateTime = "20130405062159.643000+000";
HostName = "xxxxxxxx.xxxxxxx.com";
HRESULT = "0x80072efe";
ProcessID = 4260;
StatusCode = 600;
ThreadID = 4200;
DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Successfully sent location services HTTPS failure message. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error sending DAV request. HTTP code 600, status '' DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
GetDirectoryList_HTTP('https://xxxxxxxx.xxxxxxx.com:443/SMS_DP_SMSPKG$/1fd86ee1-ece0-41ae-a2b8-5a2b305746d4') failed with code 0x800704cf. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
Error retrieving manifest (0x800704cf). Will attempt retry 7 in 1920 seconds. DataTransferService 4/5/2013 11:51:59 AM 4200 (0x1068)
my query is how some of the clients are communicating primary site server for updates even though the boundary details are properly configured and Secondary site is configured with sup. Also need to know (as per the log "DataTransferService.log")how
come the clients are communicating SSL port for updates. Plz help in resolving the issue.

Hi Kent,
Thanks for the reply.
Primary and secondary sites are connected over WAN and we have around 2000 clients which are reporting to Secondary site.
Considering the WAN bandwidth utiliztaion and number of clients on secondary site we have configured the SUP role.
Not all the clients are with the above error message around 40%-50% of the clients are with above stated error message.
Plz let me know what is the error message indicates and do we need to reffer any other logs for indepth analysis.
Locationservices.log is with fluctuating connectivity
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:35:59 AM 768 (0x0300)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
1 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 4200 (0x1068)
Executing Task LSSiteRoleCycleTask LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
2 proxy MP errors in the last 10 minutes, threshold is 5. LocationServices 4/5/2013 11:51:59 AM 5648 (0x1610)
how come the clients are communicating SSL port for updates. Plz help in resolving the issue.

SCCM 2012 Secondary site some client's are scan hardware inventory for more than 30 days

Hi,
In our SCCM 2012 environment we have secondary site configured which connected with 8500 computers, on those 5500 machines scanning hardware inventory and send latest inventory details to Secondary Site Management Point, but remaing 3000 machines are not
sending latest hardware inventory for more than 30 days. I verified clients log found it is generating report on inventory agent.log however it is not available with secondary site Management Point.
Are anyone experienced this issue, please share your thought how to fix this issue.
Thanks in advance.
Madhan

Yes i did verify but the client isn't listed on both log files. Also i couldn't open IIS log because of it size has more than 800MB. currently this site has connected with 8500 machines do you think these many clients are supported by secondary site server.
If you can't open the IIS log then how do you know that the Client's IP is not listed within them?
5000 is the max for a secondary site. You will need to secondary sites at this location.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientNumbers
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

SCCM 2007 Secondary to SCCM 2012 Secondary Site

we are planning to upgrade SCCM 2007 secondary to SCCM 2012 Secondary Site, As per the TechNet document that I understand i can't do in place upgrade of Secondary site. I can do only upgrade
of 2007 DP to 2012 DP,
This is what I plan,
1. Install a SCCM 2012 Secondary site
2. Enable DP sharing in 2012 and share the DP of 2007
3. Upgrade the 2007 DP into 2012 DP on 2012 Secondary Site.
My question is,
1. How to copy the DP package to 2012 Secondary Server DP, it will happen during the upgrade or we need to use Export/extract Content feature in SCCM 2012
2. How the client migration will happen? Do we need to distribute the 2012 client prior to DP update or we can use client push to upgrade old client.
3. before share the DP, do i have to remove the MP, PXE role on the 2007 secondary?
Thanks for your support

I have already few packages available in that DP that I am going to migrate
The second shared DP that I want to migrate to 2012, but it is not working.
Do I need to specify any thing in reassign distribution point wizard, because I only select the site code where I want to migrate the 2007 DP, and all other option I leave default and client on next.
This is what I am trying to do.
I have build a SCCM 2012 Primary and Secondary Server and I am trying to move the DP from exiting SCCM 2007 Secondary Site DP to 2012 Secondary Site.
I set a source hierarchy for primary server with enable shared DP then I am trying to reassign a DP.

SCCM 2012 Secondary Site Migration

we have to migrate more then 50 Secondary Site to SCCM 2012 Secondary Site. Since we have to low-bandwidth connection for the remote site we prefer to go with SCCM 2012 Secondary site inside of DP.
I know we can migrate SCCM 2007 Secondary to SCCM 2012 DP and SCCM 2007 DP to SCCM 2012 DP.
But is there a way i can move the distribution point package from SCCM 2007 Secondary to SCCM 2012 Secondary Site?
when i try to migrate migrate SCCM 2007 Secondary Site DP to SCCM Secondary Site 2012, it uninstall the 2007 Secondary site and upgrade the DP to SCCM 2012 under the 2012 Secondary site.
But my requirement is to move the old SCCM 2007 secondary site package to SCCM 2012 Secondary site DP, is there any tool to manage this activity?
or what is the best practice to do this migration.

Hi,
You could use prestage content in SCCM 2012 to send packages to remote DP.
Configuration Manager 2012: Content Prestaging and Remote Content Distribution
http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

OATS Load test is not able to scale for more than 10 users

Hi,
I am using OATS load test runner for performance testing Fusion based application on webcenter portal.I am not able to run OATS load tester sucessfully for more than 10 VU's.After that it gives a component not found issue or loop error.Please let me know if anybody faced similar issue and was able to resolve it.Is there some setting to be done?
Thanks,
Ritesh
Edited by: user766882 on Aug 20, 2012 9:07 AM

Hi Jean,
Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
Thanks,
Ritesh
Edited by: user766882 on Aug 21, 2012 8:25 AM
Edited by: user766882 on Aug 21, 2012 8:33 AM

Accounts that have not been logged into for more than 90 days

Hi Folks,
Good Day.
Can anyone help me to update below powershel script?
below script find in my domain all the AD users accounts that have not been logged into for more than 90 days and export the report to .csv file. in addition what I want:
1. OU=Others, Sales --> exclude this OUs
2. Disable all the user based on 90 days export report .csv file
import-module activedirectory
$domain = "test.com"
$DaysInactive = 90
$time = (Get-Date).Adddays(-($DaysInactive))
$timer = (Get-Date -Format yyyy-mm-dd)
# Get all AD User with lastLogonTimestamp less than our time and set to enable
Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp |
# Output Name and lastLogonTimestamp into CSV
select-object givenname,Name,@{Name="Stamp"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv –NoTypeInformation
Many thanks for advance Help:

Hi Anna,
Good Day.
Many thanks for your responce.
with your help i can manage to exclude the OUs as wellas can get the .csv report via mail.
Now i want to disable all the user based on 90 days export report .csv file.
could you help me on this please? the report will come everyday like below:
filename=90DaysInactive-dd-mm-yyyy.csv
sample output:
Given name User Name
Last LogOn
Test User1 user1
03-10-2006_05:30:59
Test User2 user2
02-10-2006_12:00:34
import-module activedirectory
$domain = "test.com"
$DaysInactive = 1
$time = (Get-Date).Adddays(-($DaysInactive))
$timer = (Get-Date -Format yyyy-mm-dd)
$FileName="c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv"
$from = "[email protected]"
$to = "[email protected]"
$smtpHost = "smtpservername"
$Subject = "90 Days Inactive Accounts"
$body = "90 Days Inactive Accounts report"
# Get all AD User with lastLogonTimestamp less than our time and set to enable
Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp | where {($_.distinguishedname -notlike "*OU=HR*") -and ($_.distinguishedname -notlike "*OU=OT*")} |
# Output Name and lastLogonTimestamp into CSV
select-object givenname,Name,@{Name="Last Logon"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv -NoTypeInformation
Send-MailMessage -From $from -To $to -Subject $subject -cc $cc -SmtpServer $smtpHost -Attachments $FileName -Body $body -BodyAsHtml
Thanks for your advance help.

TS1424 I need a new Battery for my I POD. I POD will not hold a charge for more than 10 songs. Model # = M9800LL - Version = 1.4.1

I need a new Battery for my I POD Touch. I POD will not hold a charge for more than 10 songs.
Model = M9800LL
Version = 1.4.1

The battery in the iPod is not user-replaceable. Take your iPod to an Apple Store or contact Apple Support and they can arrange replacement.
http://www.apple.com/support/ipod/service/faq/
Regards.

ERROR: Failed to update prerequisite results into the registry; error = 1 for sccm 2012 secondary site installation

Hi,
We try to install sccm 2012 serondary site in server 2012. It always failed.
I used the rereqchek tools to check system enviroment locally. All passed.
The primary site installed in server 2012. Both server had granted the administrator permission.
Anyone can help to check the below Configmgrprereq.log
ï»¿<01-16-2015 08:47:55> ********************************************
ï»¿<01-16-2015 08:47:55> ******* Start Prerequisite checking. *******
ï»¿<01-16-2015 08:47:55> ********************************************
ï»¿<01-16-2015 08:47:55> Commandline :
"D:\Microsoft Configuration Manager\bin\x64\smsexec.exe"
ï»¿<01-16-2015 08:47:55> Check Type: Secondary site
Site Server: DPServer.ms.com,
SQL Server: DPServer.ms.com,
SQL Named Instance: ,
Install Folder: d:\Program Files\Microsoft Configuration Manager\,
Setup Source Folder: D:\SCCM2012\Source
ï»¿<01-16-2015 08:47:55> INFO: Executing prerequisite functions...
ï»¿<01-16-2015 08:47:55> ===== INFO: Prerequisite Type & Server: SITE_SEC:DPServer.ms.com =====
ï»¿<01-16-2015 08:47:55> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:47:55> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:47:55> INFO: CheckLocalSys is Admin of <DPServer.ms.com>.
ï»¿<01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights on
the SQL Server and management point computers.
ï»¿<01-16-2015 08:48:08> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:48:08> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:48:08> INFO: Check Lanman service: <DPServer.ms.com>.
ï»¿<01-16-2015 08:48:22> DPServer.ms.com;    Check Server Service is running;    Passed
ï»¿<01-16-2015 08:48:30> INFO: OS version:0, ServicePack:0.
ï»¿<01-16-2015 08:48:30> DPServer.ms.com;    Unsupported site server operating system version for Setup;    Error;    Configuration Manager site systems can only be installed on systems running Windows Server
2008 SP2 or later.
ï»¿<01-16-2015 08:48:34> INFO: Failed to get Active Directory membership information for computer DPServer.ms.com with 0.
ï»¿<01-16-2015 08:48:34> DPServer.ms.com;    Domain membership;    Error;    Configuration Manager site server components must be installed on computers that are members of a Windows domain.
ï»¿<01-16-2015 08:48:40> INFO: Free disk space on target \\DPServer.ms.com\d$\. = 510158 MB
ï»¿<01-16-2015 08:48:40> DPServer.ms.com;    Free disk space on site server;    Passed
ï»¿<01-16-2015 08:48:47> DPServer.ms.com;    Pending system restart;    Passed
ï»¿<01-16-2015 08:48:50> INFO: The server DPServer.ms.com is not read-only domain controller.
ï»¿<01-16-2015 08:48:50> DPServer.ms.com;    Read-Only Domain Controller;    Passed
ï»¿<01-16-2015 08:48:50> INFO: Check FQDN Length for site server: <DPServer.ms.com>.
ï»¿<01-16-2015 08:48:50> DPServer.ms.com;    Site Server FQDN Length;    Passed
ï»¿<01-16-2015 08:48:50> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:48:50> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:48:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60);    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and Configuration Manager site
server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
ï»¿<01-16-2015 08:49:03> DPServer.ms.com;    Microsoft Remote Differential Compression (RDC) library registered;    Error;    Microsoft Remote Differential Compression (RDC) library must be registered for Configuration
Manager site server installation. Details at http://technet.microsoft.com/library/cc431377.aspx#RDC_for_Site_Servers.
ï»¿<01-16-2015 08:49:03> INFO: Checking Windows Installer version on DPServer.ms.com.
ï»¿<01-16-2015 08:49:13> INFO: Path of Windows Installer is <\\DPServer.ms.com\C$\Windows\System32\msi.dll>.
ï»¿<01-16-2015 08:49:19> ERROR: Failed to determine Windows Installer version from path:<\\DPServer.ms.com\C$\Windows\System32\msi.dll> .
ï»¿<01-16-2015 08:49:19> DPServer.ms.com;    Microsoft Windows Installer;    Error;    Setup failed to verify the Windows Installer version, or the installed version of Windows Installer does not meet the minimum
requirement. Configuration Manager requires at least Windows Installer version 4.5.
ï»¿<01-16-2015 08:49:19> INFO: Start Checking InstallSQLExpress on site server: DPServer.ms.com, SQL Server instance CONFIGMGRSEC
ï»¿<01-16-2015 08:49:28> INFO: SQL Server Instance Names value was not found
ï»¿<01-16-2015 08:49:28> INFO: IsPortUsedByAnySqlInstance port 1433.
ï»¿<01-16-2015 08:49:39> INFO: TCP port 1433 is not in use by any other SQL Server instances.
ï»¿<01-16-2015 08:49:49> INFO: Sql express: OS version:0, ServicePack:0.
ï»¿<01-16-2015 08:49:49> ERROR: Cannot install sqlexpress 2012, not meet OS requirement: Windows server 2008 sp2, Windows server 2008 R2 sp1 or higher.
ï»¿<01-16-2015 08:49:49> DPServer.ms.com;    SQL Server Express on Secondary Site;    Error;    A SQL Server instance is already installed on the secondary site server using the instance name CONFIGMGRSEC,
or the specified TCP port is being used by another SQL Server instance, or OS version is not Windows Server 2008 sp2, Windows Server 2008 R2 sp1 or higher. Setup is unable to install SQL Server Express on the secondary site.
ï»¿<01-16-2015 08:49:55> ERROR: Failed to connect to registry of DPServer.ms.com
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Existing Configuration Manager server components on site server;    Error;    A site server or site system role is already installed on the computer selected for
site server installation. Remove the site or site system role from the computer, or select another computer for site server installation.
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Firewall exception for SQL Server (stand-alone primary site);    Passed
ï»¿<01-16-2015 08:49:55> INFO: SQL Server computer <DPServer.ms.com>
ï»¿<01-16-2015 08:49:55> INFO: SQL Server named instance <>
ï»¿<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    SQL Server service running account;    Passed
ï»¿<01-16-2015 08:49:55> INFO: Install SQL Server Express on secondary site, skip checking.
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Dedicated SQL Server instance;    Passed
ï»¿<01-16-2015 08:49:55> INFO: CheckSQLCollationSecondary
ï»¿<01-16-2015 08:49:55> INFO: Installing SQL Server Express; skipping
ï»¿<01-16-2015 08:49:55> DPServer.ms.com;    Parent/child database collation;    Passed
ï»¿<01-16-2015 08:49:55> INFO: Checking .NET framework versions 3.5...
ï»¿<01-16-2015 08:50:05> INFO: .NET is installed
ï»¿<01-16-2015 08:50:05> DPServer.ms.com;    Minimum .NET Framework version for Configuration Manager site server;    Passed
ï»¿<01-16-2015 08:50:05> INFO: Checking .NET version required for installing SQL Server Express for Secondary Site.
ï»¿<01-16-2015 08:50:05> INFO: Checking .NET framework versions 4.0...
ï»¿<01-16-2015 08:50:10> INFO: .NET is installed
ï»¿<01-16-2015 08:50:11> DPServer.ms.com;    Minimum .NET Framework version for SQL Server Express edition installation for Configuration Manager Secondary Site;    Passed
ï»¿<01-16-2015 08:50:11> INFO: CheckInstallSourceVersion <D:\SCCM2012\Source>
ï»¿<01-16-2015 08:52:29> ERROR: Could not read install map from \\DPServer.ms.com\D$\\SCCM2012\Source\SMSSETUP\install.map (result 2)
ï»¿<01-16-2015 08:52:29> DPServer.ms.com;    Setup Source Version;    Error;    The product version in the source folder specified for secondary site installation does not match the version of the primary site.
ï»¿<01-16-2015 08:52:29> INFO:CheckInstallSourcePath <DPServer.ms.com>
ï»¿<01-16-2015 08:52:55> ERROR: Failed to call GetResultByRunningService
ï»¿<01-16-2015 08:52:55> DPServer.ms.com;    Setup Source Folder;    Error;    The computer account for the secondary site must have Read NTFS and share permissions to the Setup source folder and share. We
recommend that you do not use administrative shares (for example, C$ and D$) because they require the secondary site computer account to be an administrator on the remote computer.
ï»¿<01-16-2015 08:52:55> INFO: Enter CheckSecSiteSqlOnSameMachine.
ï»¿<01-16-2015 08:52:55> INFO: Installing SQL Server Express, skipping SQL Server check.
ï»¿<01-16-2015 08:52:55> DPServer.ms.com;    SQL Server on the Secondary Site Computer;    Passed
ï»¿<01-16-2015 08:52:55> INFO:CheckSupportedFQDNFormat <DPServer.ms.com>
ï»¿<01-16-2015 08:53:04> INFO: NetBIOS <NZWHKVMAS020>
ï»¿<01-16-2015 08:53:04> DPServer.ms.com;    Primary FQDN;    Passed
ï»¿<01-16-2015 08:53:04> INFO:CheckMachineAccountHasADAccess <DPServer.ms.com>
ï»¿<01-16-2015 08:53:30> ERROR: Failed to call GetResultByRunningService
ï»¿<01-16-2015 08:53:30> DPServer.ms.com;    Verify site server permissions to publish to Active Directory.;    Warning;    The site server might be unable to publish to Active Directory. The computer account
for the site server must have Full Control permissions to the System Management container in its Active Directory domain. You can ignore this warning if you have manually verified these permissions. For more information about your options to configure required
permissions, see http://go.microsoft.com/fwlink/p/?LinkId=233190.
ï»¿<01-16-2015 08:53:30> INFO:CheckRemoteWMIConnection <DPServer.ms.com>
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Remote Connection to WMI on Secondary Site;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Check required collation of Sql Server.
ï»¿<01-16-2015 08:53:44> INFO: LangID <409>
ï»¿<01-16-2015 08:53:44> INFO: NOT primary site or CAS install, skipping check for reqired collation of SQL Server.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Required SQL Server Collation;    Passed
ï»¿<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: SQL:DPServer.ms.com =====
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping check for sysadmin role on SQL Server.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Skip testing, no expand primary site specified.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server sysadmin rights for reference site;    Passed
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Site server computer account administrative rights' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping Windows integrated security check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server security mode;    Passed
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Unsupported site server operating system version for Setup' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server version check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server version;    Passed
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Edition;    Passed
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server Tcp Port;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is limited.
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Configuration for SQL Server memory usage;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Checking if SQL Server memory is configured to reserve minimum memory.
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server memory allocation check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    SQL Server process memory allocation;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Installing SQL Server Express, skipping SQL Server case insensitive validation.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Case-insensitive collation on SQL Server;    Passed
ï»¿<01-16-2015 08:53:44> INFO: Check Machine FQDN: <DPServer.ms.com>.
ï»¿<01-16-2015 08:53:44> INFO: getaddrinfo returned success.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Validate FQDN of SQL Server Computer;    Passed
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Primary FQDN' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:44> ===== INFO: Prerequisite Type & Server: MP:DPServer.ms.com =====
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Administrative share (Site system);    Passed
ï»¿<01-16-2015 08:53:44> INFO:CheckSiteSystemtoSQLConnectivity <DPServer.ms.com>
ï»¿<01-16-2015 08:53:44> INFO: Installing secondary site, skipping SQL Server connectivity check.
ï»¿<01-16-2015 08:53:44> DPServer.ms.com;    Site System to SQL Server Communication;    Passed
ï»¿<01-16-2015 08:53:44> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:53:44> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:53:44> INFO: The rule 'Check Server Service is running' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:53:52> INFO: OS version:0, ServicePack:0.
ï»¿<01-16-2015 08:53:52> DPServer.ms.com;    Unsupported management point operating system version for Setup;    Warning;    Configuration Manager site systems can only be installed on systems running Windows
Server 2008 SP2 or later.
ï»¿<01-16-2015 08:53:52> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:54:05> INFO: Windows Cluster not found on DPServer.ms.com.
ï»¿<01-16-2015 08:54:05> DPServer.ms.com;    Windows Failover Cluster;    Passed
ï»¿<01-16-2015 08:54:05> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:54:05> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:54:05> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:54:05> INFO: The rule 'Microsoft XML Core Services 6.0 (MSXML60)' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:54:10> DPServer.ms.com;    IIS service running;    Warning;    Internet Information Services (IIS) is required for some site system roles. You have selected to install a site system role that
requires IIS. Install IIS on the site system to continue setup.
ï»¿<01-16-2015 08:54:39> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
ï»¿<01-16-2015 08:54:39> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
ï»¿<01-16-2015 08:54:39> DPServer.ms.com;    BITS installed;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS
is not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
ï»¿<01-16-2015 08:55:08> ERROR: Failed to get WEBSVCEXT from Remote Service on DPServer.ms.com.
ï»¿<01-16-2015 08:55:08> INFO: Failed to get IIS BITS Server Extensions state on DPServer.ms.com.
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    BITS enabled;    Warning;    Background Intelligent Transfer Service (BITS) is required for the management point and distribution point site system roles. BITS is
not installed, IIS 6 WMI compatibility component for IIS7 is not installed on this computer or the remote IIS host, or Setup was unable to verify remote IIS settings because IIS common components were not installed on the site server computer. Also, check
if IIS/BITS services are running properly. Setup cannot continue until BITS is installed and enabled in the IIS settings.
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    IIS HTTPS Configuration for management point;    Passed
ï»¿<01-16-2015 08:55:08> INFO: Stand-alone primary site or secondary site. Skip checking firewall settings for SQL Server
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    Firewall exception for SQL Server for management point;    Passed
ï»¿<01-16-2015 08:55:08> DPServer.ms.com;    Administrative rights on management point;    Passed
ï»¿<01-16-2015 08:55:08> INFO:CheckV4ClientNotInstalled <DPServer.ms.com>
ï»¿<01-16-2015 08:55:36> ERROR: Failed to call GetResultByRunningService
ï»¿<01-16-2015 08:55:36> DPServer.ms.com;    Client Version on Management Point Computer;    Warning;    You cannot install the management point on a computer with an earlier version of the Configuration Manager
client installed. Upgrade the client to the current version, remove the client, or select a different computer for the management point installation, and then try again.
ï»¿<01-16-2015 08:55:36> ===== INFO: Prerequisite Type & Server: DP:DPServer.ms.com =====
ï»¿<01-16-2015 08:55:36> <<<RuleCategory: Access Permissions>>>
ï»¿<01-16-2015 08:55:36> <<<CategoryDesc: Checking access permissions...>>>
ï»¿<01-16-2015 08:55:36> <<<RuleCategory: System Requirements>>>
ï»¿<01-16-2015 08:55:36> <<<CategoryDesc: Checking system requirements for ConfigMgr...>>>
ï»¿<01-16-2015 08:55:49> DPServer.ms.com;    Unsupported distribution point operating system version for Setup;    Warning;    Configuration Manager distribution point can only be installed on systems running
Windows Server 2003 or later.
ï»¿<01-16-2015 08:55:49> INFO: The rule 'Domain membership' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:49> INFO: The rule 'Windows Failover Cluster' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:49> INFO: The rule 'Pending system restart' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:49> <<<RuleCategory: Dependent Components>>>
ï»¿<01-16-2015 08:55:49> <<<CategoryDesc: Checking dependent components for ConfigMgr...>>>
ï»¿<01-16-2015 08:55:57> DPServer.ms.com;    Microsoft XML Core Services 6.0 (MSXML60) for distribution point;    Warning;    MSXML 6.0 or later libraries are required for Configuration Manager console and
Configuration Manager site server installations. MSXML 6.0 is available for download at http://go.microsoft.com/fwlink/?LinkId=215744
ï»¿<01-16-2015 08:55:57> INFO: The rule 'IIS service running' has been run on server 'DPServer.ms.com', skipped.
ï»¿<01-16-2015 08:55:57> DPServer.ms.com;    IIS HTTPS Configuration for distribution point;    Passed
ï»¿<01-16-2015 08:55:57> DPServer.ms.com;    Administrative rights on distribution point;    Passed
ï»¿<01-16-2015 08:55:57> ***************************************************
ï»¿<01-16-2015 08:55:57> ******* Prerequisite checking is completed. *******
ï»¿<01-16-2015 08:55:57> ***************************************************
ï»¿<01-16-2015 08:55:57> INFO: Updating Prerequisite checking result into the registry
ï»¿<01-16-2015 08:55:57> INFO: Connecting to DPServer.ms.com registry
ï»¿<01-16-2015 08:56:09> INFO: Setting registry values
ï»¿<01-16-2015 08:56:16> ERROR: Failed to update prerequisite results into the registry; error = 1.

ï»¿<01-16-2015 08:48:08> DPServer.ms.com;    Site server computer account administrative rights;    Error;    Configuration Manager Setup requires that the site server computer has administrative rights
on the SQL Server and management point computers.
Actually the administrative permission had been granted.

SCCM 2012 R2 CU1 Client updates but not showing in Admin Console

I have updated my 5.00.7958.1000 client to Cumulative Update 1 (KB2938441). If I look on the client the version now says 5.00.7958.1203. My admin console when I click on the client still says 5.00.7958.1000. I tried update membership. It has
been a couple days since the update on the one. Another was early this morning. I have updated using the Patch and software package deployment. I have used the push installation to upgrade. In all cases, upgrade works, but in the console
the client versions are not changing and keeps saying version is the same.
Why wouldn't it update by now? This is crazy the time it is taking to show a new version has been installed/upgraded.
What process needs to happen? Are there specific logs for this data coming back to the console I can check?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

We are a school district so the majority of our clients are intranet. Our WAN is connected with Gigabit connections. Single sccm primary site at center of the hub-n-spoke network topology. Server running Windows server 2012 w/ 4cpu and
16 GB RAM. Server running in VMware so we can easily increase spec if needed, so more interested in what the "common" configuration may be so I can test it with those settings first and adjust accordingly.
We have 3,500 clients, only 800 of which may go home the other stay on network at all times. A large number of those 3,500 are laptops that are in carts so they are not left on all the time so the different processes need to be somewhat frequent.
Additionally, it will be almost never that all those machines are on at the same time. Many could be sitting shutdown in the carts.
Please offer your opinion as to what good settings might be. I know they may not be perfect, but I can test them out.
Also checking the Client Settings under Administration workspace, I don't see all the same type of actions I do under the Client computer -> control panel -> configuration manager -> Actions tab. Are these configured elsewhere
or do they all fall under the "hardware inventory" and "software inventory" sections of the Administration -> Client Settings?
Find this post helpful? Does this post answer your question? Be sure to mark it appropriately to help others find answers to their searches.

SCCM 2012 R2 - "Site - Client information" reports contain no data

Hi,
I'm running CM 2012 R2 and have a lot of clients installed. In management console, the clients are active, but Site - Client Information reports contain no data. The other reports, for example, Hardware - Processor etc., show data.
What is wrong?

Do you have a Fallback status point enabled and defined? if not then most of these report will not work.
However Count of Client for each site should work.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

TEXT AREA - Not able to display contents more than length 4000

We use textarea item to display contents of xml .
But if the content is of size more than 4000 , we are not able to display it in text area.
Any suggession / workaround for this .. please help.

A simple workaround is to write a function returning this text and use "PL/SQL Function Body" as a "source type" for this textarea. This way you edit text up to 32kB (limit of HTML input item)

SCCM 2012 Secondary site certificat on DC

Hi,
I have some SCCM distributions points on Windows 2003 DC. but, in CertMgr.log, I found some certificates inscription trouble :
" ERROR: could not add certificate (HRESULT=0x80070005) $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:18.333-120><thread=3856 (0xF10)>
Error: Failed to write certificate from server (SRV-AG34-WSUS.ort.ad)(SRV-AG34-WSUS.ort.ad\TrustedPeople). $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:18.338-120><thread=3856 (0xF10)>
Cancelling network connection to
\\SRV-AG34-WSUS.ort.ad\ADMIN$. $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:18.344-120><thread=3856 (0xF10)>
Failed to process notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG34-WSUS.ort.ad.CMN (0x87d20805).   $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:18.407-120><thread=3856 (0xF10)>
~Found notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG35-WSUS.ort.ad.CMN $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:18.411-120><thread=3856 (0xF10)>
The machine account will be used for ["Display=\\SRV-AG35-WSUS.ort.ad\"]MSWNET:["SMS_SITE=AIX"]\\SRV-AG35-WSUS.ort.ad\.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:18.422-120><thread=3856 (0xF10)>
Successfully made a network connection to
\\SRV-AG35-WSUS.ort.ad\ADMIN$.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:18.608-120><thread=3856 (0xF10)>
   ERROR: could not add certificate (HRESULT=0x80070005) $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:21.685-120><thread=3856 (0xF10)>
Error: Failed to write certificate from server (SRV-AG35-WSUS.ort.ad)(SRV-AG35-WSUS.ort.ad\TrustedPeople). $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:21.687-120><thread=3856 (0xF10)>
Cancelling network connection to
\\SRV-AG35-WSUS.ort.ad\ADMIN$. $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:21.689-120><thread=3856 (0xF10)>
Failed to process notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG35-WSUS.ort.ad.CMN (0x87d20805).   $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:21.770-120><thread=3856 (0xF10)>
~Found notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG46-WSUS.ort.ad.CMN $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:21.774-120><thread=3856 (0xF10)>
The machine account will be used for ["Display=\\SRV-AG46-WSUS.ort.ad\"]MSWNET:["SMS_SITE=AIX"]\\SRV-AG46-WSUS.ort.ad\.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:21.783-120><thread=3856 (0xF10)>
Successfully made a network connection to
\\SRV-AG46-WSUS.ort.ad\ADMIN$.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:22.026-120><thread=3856 (0xF10)>
   ERROR: could not add certificate (HRESULT=0x80070005) $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:42.876-120><thread=3856 (0xF10)>
Error: Failed to write certificate from server (SRV-AG46-WSUS.ort.ad)(SRV-AG46-WSUS.ort.ad\TrustedPeople). $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:42.880-120><thread=3856 (0xF10)>
Cancelling network connection to
\\SRV-AG46-WSUS.ort.ad\ADMIN$. $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:42.884-120><thread=3856 (0xF10)>
Failed to process notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG46-WSUS.ort.ad.CMN (0x87d20805).   $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:42.887-120><thread=3856 (0xF10)>
~Found notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG54-WSUS.ort.ad.CMN $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:42.891-120><thread=3856 (0xF10)>
The machine account will be used for ["Display=\\SRV-AG54-WSUS.ort.ad\"]MSWNET:["SMS_SITE=AIX"]\\SRV-AG54-WSUS.ort.ad\.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:42.899-120><thread=3856 (0xF10)>
Successfully made a network connection to
\\SRV-AG54-WSUS.ort.ad\ADMIN$.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:42.930-120><thread=3856 (0xF10)>
   ERROR: could not add certificate (HRESULT=0x80070005) $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:45.024-120><thread=3856 (0xF10)>
Error: Failed to write certificate from server (SRV-AG54-WSUS.ort.ad)(SRV-AG54-WSUS.ort.ad\TrustedPeople). $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:45.029-120><thread=3856 (0xF10)>
Cancelling network connection to
\\SRV-AG54-WSUS.ort.ad\ADMIN$. $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:45.033-120><thread=3856 (0xF10)>
Failed to process notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG54-WSUS.ort.ad.CMN (0x87d20805).   $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:45.036-120><thread=3856 (0xF10)>
~Found notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG64-WSUS.ort.ad.CMN $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:45.040-120><thread=3856 (0xF10)>
The machine account will be used for ["Display=\\SRV-AG64-WSUS.ort.ad\"]MSWNET:["SMS_SITE=AIX"]\\SRV-AG64-WSUS.ort.ad\.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:45.048-120><thread=3856 (0xF10)>
Successfully made a network connection to
\\SRV-AG64-WSUS.ort.ad\ADMIN$.~ $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:45.191-120><thread=3856 (0xF10)>
   ERROR: could not add certificate (HRESULT=0x80070005) $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:47.805-120><thread=3856 (0xF10)>
Error: Failed to write certificate from server (SRV-AG64-WSUS.ort.ad)(SRV-AG64-WSUS.ort.ad\TrustedPeople). $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:47.810-120><thread=3856 (0xF10)>
Cancelling network connection to
\\SRV-AG64-WSUS.ort.ad\ADMIN$. $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:47.814-120><thread=3856 (0xF10)>
Failed to process notification file E:\SCCM\inboxes\certmgr.box\3_SRV-AG64-WSUS.ort.ad.CMN (0x87d20805).   $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:47.818-120><thread=3856 (0xF10)>
servers will be polled in 644 seconds... $$<SMS_CERTIFICATE_MANAGER><10-24-2012 11:18:47.821-120><thread=3856 (0xF10)>"
(All servers in this part of log are DC)
Any suggestion to help me ?
Thx

I am seeing this same symptom right now at a client, though just Server 2003 member server, not a DC. I know this is an old thread but did you ever get a resolution on this?

Browser does not seem to prompt for more than once per session, to accept untrusted sites. I have to close/open firefox to visit multiple untrusted sites in one sitting. Is there a way to fix?

I use firefox to connect to the console of different Sun/Oracle servers. The www pages are "untrusted" and I get a question to continue to connect or not. When I say continue, it pops up a window to either accept or deny the cert. This window, once I accept it, to continue to do my work. When I'm finished with that server and continue to another one, that window no longer pops up for me when another untrusted www page is loaded. But when I quit firefox, and then revisit the page, the dialogue pops up and I can accept the new cert and continue to work.
I'm considering going back to the older version of firefox as this is severely impacting my day to day use of it. I'm still trying to see if I can get around it by fiddling with different firefox options.

Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

Not possible to filter for more than one dimension in Datasource script filter method?

Hi experts.
We have a scenario where we need to apply filter on multiple dimensions .Eg.
We have one data source DS1 with Dimension HUb and material_grp .
Now we want to filter the DS1 with HUB and Material_grp at the same time.
I am using below statement to apply filter.
DS_1.setFilterExt("ZHUBCODE", "HUB1" );
DS_1.setFilterExt("ZMAT_GRP", "MATG1" ); //Clears HUB filter and shows data for all HUBS , filter with material group only
But Setfilter method first delete the last filter and apply new one.And set filter method takes only one dimension at a time.
Please help me in this

Hi Rajender,
Just as a follow-up, if you are using BW as a data source, make sure for each of the dimensions, ZHUBCODE and ZMAT_GRP, that in the Initial View Editor of the data source, the Members for Filtering > Only Values with Posted Data option is selected, which should be the default anyway.
Again if you are using BW, the other option you could try is to use the internal key for filtering with setFilter instead of setFilterExt. Is there a particular reason why you are using the external key?
Regards,
Mustafa.

SCCM 2012 Secondary site client's are not doing hardware scan for more than 30 days

Similar Messages

Maybe you are looking for