SCCM console does not show the link to the report manager!

SCCM console does not show the link to report manager.
Any idea?
thanks!

Hi,
The report manager URL isn't displayed in SCCM console. Why you want to display it in console?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Why does Group created on Master console does not show any device count mapped on the managed Amp?

Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console.

Laura Quitugua wrote:
Hi,
I have syced my outlook email with my iphone 4s and ipad.
Note that only the email account info (username, login, server) is sync'd.
The actual emails are not sync'd.
Opening an email on one device does nothing on teh other devices.

HT4623 My ipod does not show update settings in the About section

My ipod does not show update settings in the About section how can i get the update ios5 in order to get facebook on my ipod how can i do this

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

My Ipad does not show it is in the right city, My Ipad does not show it is in the right city, My Ipad does not show it is in the right city

My ipad 2 does not show it is in the right city if I check it on mobile me...anyone else have that problem?

At the time you check your iPads location through MobileMe, your iPad would need to have access to and be connected to the internet.

Mediafire does not show download link

It's been about a week since I last manage to download from Mediafire. When I click on a Mediafire link, the download link does not show although the page has finish loading. Refreshing the page repeatedly does not help and I've tried the solution to delete all cookies as stated on a similar thread (http://support.mozilla.com/en-US/forum/1/673873) but it doesn't work either. After deleting all the cookies, clicking on the Myfiles link brings me to Mediafire's main webpage instead. Are there any ways to solve this? =( Please help!
== URL of affected sites ==
http://www.mediafire.com/

Ok, I've updated to firefox 3.6. Here's the support data and the screenshot. I hope it helps and umm, sorry for all the trouble as well..
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
AVG Safe Search
9.0.0.812
false
{3f963a5b-e555-4543-90e2-c3908898db71}
BitComet Video Downloader
1.19
false
Fission
1.0.9
false
{1280606b-2510-4fe0-97ef-9b5a22eafe41}
IDM CC
6.4
false
[email protected]
Java Console
6.0.17
false
Java Console
6.0.20
false
RealPlayer Browser Record Plugin
1.1.3
false
Skype extension for Firefox
2.2.0.102
false
フォクすけといっしょ
0.1.6.3
false
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.history_expire_days.mirror
180
browser.history_expire_days_min
7
browser.places.importBookmarksHTML
false
browser.places.importDefaults
false
browser.places.leftPaneFolderId
-1
browser.places.migratePostDataAnnotations
false
browser.places.smartBookmarksVersion
2
browser.places.updateRecentTagsUri
false
browser.startup.homepage
about:blank
browser.startup.homepage_override.mstone
rv:1.9.2.3
dom.disable_window_move_resize
true
dom.max_script_run_time
1800
extensions.lastAppVersion
3.6.3
network.cookie.cookieBehavior
1
network.cookie.prefsMigrated
true
print.print_printer
Nitro PDF Driver 5
print.printer_Nitro_PDF_Driver_5.print_bgcolor
false
print.printer_Nitro_PDF_Driver_5.print_bgimages
false
print.printer_Nitro_PDF_Driver_5.print_command
print.printer_Nitro_PDF_Driver_5.print_downloadfonts
false
print.printer_Nitro_PDF_Driver_5.print_edge_bottom
0
print.printer_Nitro_PDF_Driver_5.print_edge_left
0
print.printer_Nitro_PDF_Driver_5.print_edge_right
0
print.printer_Nitro_PDF_Driver_5.print_edge_top
0
print.printer_Nitro_PDF_Driver_5.print_evenpages
true
print.printer_Nitro_PDF_Driver_5.print_footercenter
print.printer_Nitro_PDF_Driver_5.print_footerleft
&PT
print.printer_Nitro_PDF_Driver_5.print_footerright
&D
print.printer_Nitro_PDF_Driver_5.print_headercenter
print.printer_Nitro_PDF_Driver_5.print_headerleft
&T
print.printer_Nitro_PDF_Driver_5.print_headerright
&U
print.printer_Nitro_PDF_Driver_5.print_in_color
true
print.printer_Nitro_PDF_Driver_5.print_margin_bottom
0.5
print.printer_Nitro_PDF_Driver_5.print_margin_left
0.5
print.printer_Nitro_PDF_Driver_5.print_margin_right
0.5
print.printer_Nitro_PDF_Driver_5.print_margin_top
0.5
print.printer_Nitro_PDF_Driver_5.print_oddpages
true
print.printer_Nitro_PDF_Driver_5.print_orientation
0
print.printer_Nitro_PDF_Driver_5.print_pagedelay
500
print.printer_Nitro_PDF_Driver_5.print_paper_data
1
print.printer_Nitro_PDF_Driver_5.print_paper_height
11.00
print.printer_Nitro_PDF_Driver_5.print_paper_size_type
0
print.printer_Nitro_PDF_Driver_5.print_paper_size_unit
0
print.printer_Nitro_PDF_Driver_5.print_paper_width
8.50
print.printer_Nitro_PDF_Driver_5.print_reversed
false
print.printer_Nitro_PDF_Driver_5.print_scaling
1.00
print.printer_Nitro_PDF_Driver_5.print_shrink_to_fit
true
print.printer_Nitro_PDF_Driver_5.print_to_file
false
print.printer_Nitro_PDF_Driver_5.print_unwriteable_margin_bottom
0
print.printer_Nitro_PDF_Driver_5.print_unwriteable_margin_left
0
print.printer_Nitro_PDF_Driver_5.print_unwriteable_margin_right
0
print.printer_Nitro_PDF_Driver_5.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.OCSP.disable_button.managecrl
false
security.disable_button.openCertManager
false
security.disable_button.openDeviceManager
false
security.enable_java
false
security.warn_viewing_mixed
false
Thank you so much for your help!

Shared tab in left menu column does not show on one of the computers after setting up Home Sharing

For iTunes 10.3, I have set up home sharing on two computers that run windows 7, I have authorized both computers. The iTunes Shared link for computer 2 shows up on left column for computer 1(main iTunes computer). The problem I am having is that the Shared link for computer 1 DOES NOT show up on computer 2. My network between the both computers is working because I am able to pull/copy music files from computer 1 to computer 2. Why doesn't the Shared link for Computer 1 show up on Computer 2 Itunes left column? Any help would be most appreciated. Thank you.

Nothing had changed when I plugged in my iPod at work today, having changed it to manage manually earlier at home. But after rebooting a few minutes ago, iTunes cranked up and updated the library. The library now appears below DEVICES/iPod on the menu instead of under LIBRARY/Music at the top left, which I'm pretty sure is different from before, but no matter. Also the iPod is still not appearing in My Computer but again, no matter. I am able to play my tunes on the work install of iTunes now and use iDump (which is a helluva lot less trouble than iTunes) to extract them.
Thanks again for all the help.
HP Pavilion, Dell Optiplex Windows XP

10.1.3.5 Flow diagram in Bpel console does not show all details

Hello,
Does anybody experience this? And what would be the fix did we missed some configuration (hopefully)?
Bpel Console-> Instances->choose instance with executed pick activity->Flow (to see diagram of the flow)
10.1.3.5 does not show underlying activities in a picked onMessage action. However in a "Audit" all details are shown OK. In the attached example it's onAlarm - but it's happening with all of onMessages.
http://i41.tinypic.com/2jdj1ab.jpg
10.1.3.4 - shows underlying activities fine
http://i43.tinypic.com/vwtys1.png
BPEL process piece of source:
http://i39.tinypic.com/xm0hoy.png
thanks in advance!

Finally found info about this seems to be a known bug:
Patch 9162451: ACTIVITIES NESTED WITHIN PICK/ONMESSAGE/ONALARM ARE NOT DISPLAYED IN BPEL FLOW

TS2753 a purchased song does not show my name on the info

I purchased a song thru I-tunes and I cannot get it to play. If I look at the info, it does not show who it was purchased by. All of my other songs do and they play fine.

The 'Purchased' music is just a special Playlist. You can create your own and drag the links into the 'Purchased' PL.
Using the command CMD-J you can add the Purchase date to your list view - sort by date - drag the tunes to the 'Purchased' PL.
MJ

When I open Photoshop CS6, the image does not show in Photoshop. The image IS open, i.e. the filename is shown on a tab and the image layers show in the layer panel. What is going on?

Both Photoshop and Bridge open as usual. But when I open an image, the image does not show in the image area. The image filename does show in a tab and the layers show in the layer panel. What is going on and how do I fix this.

I resolved the problem. It was somehow related to my using Microsoft
theme pictures. I set Windows to use the basic theme and the problem
went away. Thank you for the suggestions.
Jac

How do I REMOVE an ADD-ON from my TOOLBAR, when said ADD-ON does NOT show up in my ADD ONS Manager?

I have been instructed to:
"When you open Firefox up in the left hand corner there is a drop down box that says "Firefox". Click on this and go to add-ons a new page will open with tabs on the side.
Click on ADD-ONS, use ADD-ON Manager...."
That does not happen that way. (I am on Firefox 19.0 for MAC.)
When I click on Firefox (left hand corner at top of screen) "ADD-ONS" does NOT appear.
I get "preferences" and "services" plus, of course ABOUT/HIDE/SHOW/QUIT choices.
Running through ALL choices in PREFERENCES (which was not included as a step in your description) I find NO WAY to "deal with" ADD-ONS in General, Security, Privacy or Advanced.
"services" says only NO SERVICES APPLY"
I KNOW that I have an "ADD-ON Manager" I can open that. The ADD-ON that I need to REMOVE/Uninstall/Disable does NOT show there.
It is an ICON on the lowest level of my toolbars showing above my window. Whether this is an awesome bar, or any other specially named bar I can't tell you, but: LOWEST section.
This creepy ADD-ON (that I never personally installed) is called PRICEGONG - and it is now opening up a pop-up on all my eBay pages and elsewhere -trying to sell me things.
It is wasting SO much of my time and I need to get it gone.
WHAT do I do now? The PRICEGONG company has explanation of what to do to uninstall, but (no surprise) THEIR instructions/steps do not match reality either. RESULT: I can't get RID of this thing and am wasting huge amounts of time now with it.
WHAT CAN I DO?

hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
[[Disable or remove Add-ons]]

:: NWA does not show table view for monitoring reports ::

Hi,
We are facing an issue in one of our portal system.
I click on Portal index page, then I go to Net weaver Administrator --> Monitoring --> Java system reports.
Here I get the resource utilization graphs.
The graphs show proper values however when I click on table view it does not show any value or table at all.
Then I click on Settings button, and click on Persistent radio button.
It asks to enter the number of days for which the the data should be stored.
I gave it as 2 days and click on Apply button.
It shows a message saying "changes would be effective after restarting monitoring service".
However when I go there i.e. NWA --> Administration --> Applications
I get below services
cafruntimemonitoring~ear
com.sap.ip.bi.sdk.monitoring
tclmwebadminmonitoravail~wd
tclmwebadminmonitorcomplib~wd
tclmwebadminmonitorprovider_ear
tclmwebadminmonitorstate~wd
tclmwebadminoverviewmonitoring~wd
tcmonitoringsysteminfo
Would you kindly suggest which service from above list should be restarted ?
Thank you, Regards,
Girish Garje.

I think what is being asked is "How do I expose a database view as a schema table in Configuration Manager?"
This is accomplished by creating a database view within the WCC database schema (and with the WCC schema user as the view owner). The view then will appear as a table in the "table" tab in Configuration Manager.
One caveat in 11g is that the user created by RCU does not have any privileges to read/create views in its own schema. You may need to grant privileges to views for the WCC schema user before this will work.

My SCCM Client does not show all the tabs in the Config manager control pannel

Hi All,
I have a issue Post pushing a installation on a client. It was installed successfully. But i do not get all the options in the control panel as per the below screenshot.
I reinstalled the client via push from the console during the re installation i got the below errors as per the below screenshot.
Can any one tell me why is this issue happening.
I get all the options in my SCCM DP / Site server control panel but not in the client.
I got the DP role re installed, As well as well as checked the DNS. Iam able to ping from my client machine to the Site server / DP via ip as well as FQDN.
Can any one please help?
Gautam.75801

Got the solution.
1. Reconfigure the boundary and boundary groups and rebooted the SCCM DP / Site server.
2. Turn firewall off in the client and uninstall the SCCM setup in the client and Rebooted the client and re install the client via push method from console
3. Turned off the UAC in the client machine.
Now i am able to get all the tabs s well as Console shows the server as a client.
Gautam.75801

Console does not show the user defined subsystem

Hi,
We have created a several subsystems using NonCatalogLogger and we are able
to call .info() and .error() methods on these subsystems. But console doesn't
show these subsystems and we are not able to see the error message in 'View Server
log' .
It doesn't show up either in Domain Log Filter. Can someone give us some pointers
to resolve this problem? we are using version 6.1 SP2
Thanks,
PJ Meda

I see the debug messages(displayed using info() and error()) in the log file. But
when I try to customize the log view, I don't see our subsystems in the subsystems
list.
I am not able to see the messages in "View Server Log".
Thanks.
PJ Meda
"PJ Meda" <[email protected]> wrote:
>
Hi,
We have created a several subsystems using NonCatalogLogger and we
are able
to call .info() and .error() methods on these subsystems. But console
doesn't
show these subsystems and we are not able to see the error message in
'View Server
log' .
It doesn't show up either in Domain Log Filter. Can someone give us some
pointers
to resolve this problem? we are using version 6.1 SP2
Thanks,
PJ Meda

How come my latest version of firefox does not show identification flags when the arrow or finger is on an item such as a link

using Internet Explorer or when using I.E. through AOL; when I place the cursor/arrow/finger over many links , PIX, buttons, etc. ... a flag comes up (much like the ones that ID a function on my desktop) that tells me what the link , PIC, etc. is.
When using Firefox that feature does not work... even on the same icon,link, etc. that works just fine without Firefox. I like these ID Flags and have grown to depend on them over the years. How can I implement this "ID flag" using Firefox.?

unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
<br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
[[Troubleshoot Firefox issues caused by malware]]

DMP does not show html link

Hi,
We are deploying a DMM system with DIgital Signs, version 5.3.0. We are using DMP 4310G with the beta version of firmware 5.4 as this is the only one with a browser.
We need to show Cisco unified Intelligence Center ( CUIC ) reports of IPCCE.
When I first tried to use the GoTo URL method with play now, it worked fine. with the same link, I created a Presentation using the designer and we only saw a black box on the screen. I can see that the startup URL changes ( if I do play now with go to url method, then Startup URL chnages to what I push and it clears the contents of the Flash Variables Data_Url, if I create a presentation and schedule it to play at certion intervals then it shangec the Flash Variables URL and the Startup URL stays as default ).
Now the problem with the Play Now + Go To URL is that you cannot schedule and cannot erally arrange the screen as you want. But Still, this might have been a solution at least until we figure out why it is not working with Presentation + Schedule method.
So I have created a new report on CUIC by increasing the Font size to 30 ( by default it is 10 ). It shows fine, I again created a GoTo URL also cerated a presentation with the same link. The preview on the designer looks fine.
So I pushed the GoTo URL using play now to one DMP and scheduled the presentation for the other DMP. The one with presentation shows a big black screen and the other one shows a big white screen.
So if anybody have any idea what might be going wrong, or what I may be doing wrong taht wuld be great.
By the way I am uisng the permalinks of the Dashboards from CUIC. I tried with both http and https.
Thanks

Hello,
DMS 5.4 is officially out, so you could test this with a full 5.4 system. DMP running 5.4 is not officially supported with DMM running 5.3. See the compatibility matrix at:
http://www.cisco.com/en/US/docs/video/digital_media_systems/dmscompat3.html#wp1207463
Please notice that the 5.4 release do not support Show and Share and the scheduling system has been changed with a new Channel feature.
Regards,
Marco

SCCM console does not show the link to the report manager!

Similar Messages

Maybe you are looking for