Sceptre X24WG Blinks on and off

Hi there,
I just bought a Sceptre 24" widescreen monitor (X24WG) that is supposed to have native resolution of 1920x1200 @ 60hz. I've plugged it into the Mac Mini (G4 w/1.42 and 1 GB RAM) via the DVI input and tried to get the 1920x1200 resolution to work. But once selected in the Control Panel, the display goes black for a few seconds, comes back on for a second, then goes black for a few more seconds. It just keeps performing this cycle until I select 1920x1080 at which point it stabilizes.
1280x1024 seems stable as does 1360x768. The rest are just like the 1920x1200, constant blinking in and out.
I have tried the VGA input, at which point more resolutions become stable, but the clarity versus the DVI is horrible!
Am I out of luck with the Mini when trying to reach the 1920x1200 resolution on DVI? Or is it the cheap monitor? Or a combination of the two?

Thank you so much for the insight. I tried what you recommended and, indeed, I can get the monitor to hold steady at 1920x1200 using DisplayConfigX set to 135 MHz on the pixel clock. It runs at 53 MHz refresh rate by doing so, which seems awfully low to me, but the monitor seems to tolerate it.
However, I still cannot get rid of the red and green dots that appear periodically after waking the display from power saving mode. The only cure is to switch to a new supported resolution and then back to the 1920x1200. This clears the red and green dots for some reason.
I saw another post about buying the same monitor and having the same problems... unfortunately I am working overseas right now and had the monitor shipped to my UK location from Newegg.com. Returns and/or exchanges through them for LCD's, ESPECIALLY to those of us overseas, are hardly worth it. I'm looking to sell the monitor on eBay here since there seems to be nothing wrong with the monitor itself. It just doesn't play nice with my Mac Mini...
BSteely: Thanks again for your response! You definitely diagnosed the root of what is going on here. Thank you!!!

Similar Messages

I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continues to blink on and off. I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated

I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continue to blink on and off.
I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated.

are you backing up files, or doing a Time machine backup, either way, the Time machine will STOP when finished and show "last backup at XXXXXX" meaning its done...... OR if when transferring files, it will show a progress bar on your desktop and vanish when files are copied.
Open up the Hitachi drive (your G drive is made by Hitachi, and the best made by the way).....and see if the files are there.
a MORE VISUAL way is to open the hard drive file, and drag and drop files INTO the Gdrive and you can see them visually be copied there as you do it.
To see your HD on your desktop GOTO FINDER......PREFERENCES....then GENERAL TAB.........check the box marked HARD DRIVES.........then your Gdrive will appear on your desktop........open it from there, and DRAG and drop files from anywhere INTO the Gdrive....... easy visual way to see the files being copied into the Gdrive.

New iPod touch blinking on and off repeatedly

I just bought a new ipod touch today, and once I plugged it in to my computer, it showed the apple logo, but then the screen went haywire by blinking on and off. When it's blinking on and off, the screen looks frozen.
I've hardly touched it, what do i do? Someone please help. (please spare me any sarcasm)

Actually, after I got the iPod Touch replaced, it had the same exact problem, which I suspect that I'm just very unlucky because my computer is relatively new. I've been trying to figure this out for weeks.
I did take my iPod back to the store where the associate talked down to me and kind of made me feel stupid (on their computers, nothing is wrong..but at my house, it's pretty much cursed) ..so yet again, I am trying to get the iPod replaced and figure out what is wrong.
I also tried calling, addressing two problems (one of which is irrelevant). They pretty much gave no answer for this question. They told me to restart it, but as I said, no button works after it shuts off.
Message was edited by: anj3lyuna23

My HP Pavilion dv9700 will not power up. Lights blink on and off on a cycle, but screen is black

My HP Pavilion dv9700 will not power up. Lights blink on and off on a cycle, but screen is black.

Please post your Full Product Number
http://h10025.www1.hp.com/ewfrf/wc/findModel?lc=en&dlc=en&cc=us

Privacy,emails,and third party enails,and ny phone contacts blinking on and off and My internet connection working properly

Monday November 11,2013-Dear firefox,I have several questions and several complaints also.-) why am I receiving 3 party emails and it states on this download if you don't want them to have a check Mark by this. I have done away with 3 party emails,now I get emails from all sorts of 3party emails in Mine and My dads and family private email inbox and spam, ones we didn't sign up for in our inbox and spam inappropriate emails and all sorts of emails, and also My phine after download,has slowed My internet connection and has caused , My contacts on My phone to light up and blink on and off.-) If this is suppose to be a download for My phone? and email to make it work more accurate and rapid it hasn't mine,I'm not happy with this experience at all on firefox. please email me back to Mine and My dads and familys honestly and truthfully answering abd taken care of this explaining into detail, in mine and My dads and familys private email thanks why were having so many difficulties and please send it to [email address removed for privacy] regarding this.-) I will be emailing through out the week to make sure this is honestly explained ans taken care of in a timely Manner.-) And I will not refer anyone to try Firefox -)
====email address removed to secure your privacy. ====

Could you start by indicating what you downloaded and for which system (Windows, Mac, Android, etc.). Please look up the download URL in the history of the browser you used to download it so a volunteer can investigate what you got.

Mac Mini desktop folders/icons and top menu blinking on and off

Hello. I've just returned to my Mac Mini after being away for a few days. Upon booting and having the desktop fully load, I have been experiencing all folders/icons and top menu bar blinking on and off every ten seconds. I have only opened Fire Fox to try and diagnose why this is happening. No solution yet.
I am running Snowleopard with Mavericks and I'm aware Mavericks is a little buggy at the moment (beach ball used to blink on and off every now and again and performance has gotten slow) I only have the HDD replaced last week as the last one failed. I really need to fix this problem soon as I rely on my Mac to work from home.
Any help would be greatly appreciated
Jan

I have sovled the problem! for now at least. I came across another users suggestion to dissable "sync status icons" in google drive as it confics with the finder in Mavericks. I guess this would only work with others having this problem with Google Drive and Mavericks.

Display blinks on and off

I'm using two displays with my G5. The primary display recently started blinking on and off when I used any "busy" web site, meaning a site on which images constantly change or text automatically updates. The problem occurs in both Firefox and Safari, although it seems to occur more frequently when I use Firefox.
There's no issue with the secondary display. If I move the browser window to that display, I can browse all sites without problems, regardless of the browser I use. Also, when I quit the browser on the primary display, the blinking stops; it doesn't occur when I use other applications.
A self-test of the primary display checked out OK, and the problem persists even though I replaced the monitor's cable. Coincidentally -- or not -- the problem occurred after I installed Leopard on the Mac.
Any ideas about what's happening or what I can do to diagnose?
Thanks.
David

Thanks for the response.
The problem (which I just noticed occurred in Entourage also) resolved after I reversed the monitor connections. I then reversed the connections back to the original configuration, and the problem has not recurred (at least so far), either in the dual-display or single-display configurations.
The only thing I can think of that may have had an effect is that the primary monitor, connected digitally, ran an auto-reset function after I switched the connection to analog.

HT4623 What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

What does it mean after you update your phone and then your phone starts to blink on and off showing the apple logo only?

Read http://support.apple.com/kb/ht1808

Can anyone help me get my Apple TV display to stop blinking on and off every second?

Hi,
My Apple TV is a little under a year old its not version 1 I'm pretty sure it's 2... When I started it up the other night it came on but the display in the screen was blinking on and off about one a second non stop. The white light on the Apple TV is solid white. I was behind an update so I updated it using restore and when it came back on the display is still blinking on and off. When I restart it, the initial apple logo comes on solid which gave me hope but once it transitions to the initial menu screen it starts blinking again. Anyone have a solution?
Thanks for your time,
Dadguy

Hi again,
A couple more things I should add. Everything else plugged into the plasma screen works fine, Xbox, satellite, wii etc...and I did change hdmi cables with the Xbox and the Xbox still worked fine and the Apple TV continues to blink on and off on screen.
Thanks,
Dadguy

I was resetting my Iphone 4 at itunes it locked and now blinks on and off logo what do I do to reset it?

I was resetting my iphone 4 at itunes and it locked and now blinks on and off the logo and will not allow me to reset it.
What do I do now to reset it.

Try to connect in recovery mode and restore again, explained here:
iOS: Unable to update or restore

TS1363 Iphone just shows the apple and blinks on and off.

Iphone just shows the apple and blinks on and off.

Hello grumpy48,
The article linked below details a number of useful troubleshooting steps that can help restore functionality to your iPhone.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

My iphone went dead and now has the apple logo blinking on and off

my iphone 4 went dead and now has the apple logo is slow blinking on and off when it's plugged into my computer. I cannot stop it. Tried a hard restart but nothing happened.

Morning blgarratt,
Thanks for using Apple Support Communities.
If it is showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
For troubleshooting on this, take a look at this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Hope this helps,
Mario

Desktop icons blink on and off; computer won't boot

I was recently trying to view a quick time file on a dvd when I got the message that some components may be missing to view the file. I downloaded the components from Avid and put them into my quicktime folder (Library>>>Quicktime folder).
When that didn't work, I removed the older component that had been in the folder and tried to to view the DVD again. This time I was unable to even open Quicktime. I tried to return the "old" component back into the Quicktime folder, but kept getting an error message. Something along the lines of "an unexpected error occured."
I then attempted to reboot the computer. That's when the trouble really started.
My computer now gets to my desktop; all the icons blink on and off, and then the computer seems to try and try to start. I assume that the component I removed was in the start up sequence, but a) I don't know for sure, b) I, of course, can't get on to find out, and c) even if that is the problem, I don't know how to fix it without getting that error message.
Has anyone experienced this problem? Any thoughts? All assistance will be HIGHLY appreciated. Thank you.
LHT

Restart your machine with the Command and S keys held down, and enter the following commands:
mount -uw /
mv /Library/QuickTime/ /Library/QuickTime_old/
exit
Your computer should then continue the startup sequence; if it finishes starting up, the components you installed were responsible for your issue. My own /Library/QuickTime/ folder is empty, so the folder doesn't contain anything critical.
(11003)

Doesn't start, Apple logo blinks on and off.

My iPod Classic won't start. There's just a pale image of the Apple logo which blinks on and off. Plugging it into various USB ports has no effect.
Dying battery? (I've had the device for about a year only.)

Okay, here's something I found out: charging it with a power adapter instead of via the USB cable worked.
Question: why would charging it with the USB connection not work?

Why does my image blink on and off when using selecton tool

why does my image blink on and off when using selection tool

This is due to the hardware acclerated drawing not working properly because your graphics hardware doesn't support it right. This is usually resolved by updating the graphics driver to the latest version. If this is not possible, turn off OpenGL in Preferences --> Performance.
Mylenium

Sceptre X24WG Blinks on and off

Similar Messages

Maybe you are looking for