Schedule lines not getting created while applying exit at line item
Hii all,
First of all , I will explain my scenario. I have a requirement to give pop up screen in VA01 to get order quantity as per business requirement.
i have used customer exit MV45AFZZ , USEREXIT_MOVE_FIELD_TO_VBAP . in this exit i m calling my Z function module which gives pop up screen through which user will enter length code and lot size. from this i will calculate quantity and update quantity field.
Now problem is that, no schedule lines are getting created when i m applying this quantity calculation logic directly to line item quantity.
So, I want schedule lines also to be generated. If somebody has a solution , plz reply soon.
Thanks & Regards,
Kavan Shah
my id is [email protected]
Hi Kavan ,
by debug u can find out whats the wrong with ur code , check the UPDKZ of XVBAP?
regards
Prabhu
Similar Messages
-
BP not getting created while creating employee
Hi,
When I Hire an employee a BP should be created for it. It used to happen earlier in the system but after we moved to another system this is not working. Can someone please let me know the necessary config for this?
I've the following settings:
HRALX ONUMB = 2
HRALX OSUBG = MD
The MD number range is from 90000000 to 9999999999. Should this number range be internal or external?
When I use the HR_SYNC_PERSON report for an employee I get the error as
"Determination of connections to object 'BP' of 'CP' '50000201' failed"
"Object of type 'US' with ID '1122' does not exist or is inconsistent"
"Determination of connections to object 'BP' of 'O' '50000101' failed" etc
Also I need to upload the employee master data using LSMW and BP does not get created with LSMW also? Is there some specific config while using LSMW?
Please help.Whenever you are uploading employees using LSMW, you need to run program HR_SYNC_PERSON.
Pls refer to the following thread for further info:
Assignment: Business partner for person '50000029' is not unique
Regards,
Dilek -
BP number not getting created while creating org structure in PPOMA_CRM
Hi,
we have sol Man 4.0 SP15. I am creating org structure in PPOMA_CRM. After creating the org units, the BP number are NOT getting generated automatically. Please advise on this.
Regards
KumarHi,
Hav a look at the below post
[PPOMA_CRM no BP number assigned|PPOMA_CRM no BP number assigned]
Thx,
Waseem -
Schedule Lines not getting created in MRP
Dear All.
I created Scheduling agreement and assigned this Scheduling agreement in Source list with indicator 2 which is u201CRecord relevant to MRP. Sched.lines generated automaticallyu201D
Then I run MRP using MDO3 and parameters
Processing key: NETCH
Create Preq: 1
Del schedules: 3
Create MRPlist: 1
Planning mode: 3
Scheduling: 2
But still the results shows as its creating Purchase Requisition .
What can be reason for this?
Please let me know your thoughts on this
Regards
Shyamhi,
Normally this shd not happen if the data is maitained properly....
I mean you shd check the run results from MD04/06..in which check which sourcelist the system/MRP has taken while run..is this source same as you maintained....
Yes check header data....
As you are saying that yes, the sch. agr. validity lies, but only this doesn't mean that del. sch. will generate....you have to check the schedule dates which would have mentioned for the generation of del. schedule...if this date is later, means, tomorrow or day after tomorrow even though its in validity period, system will not generate del. sch. for this sch. agreement...then system will PR...
Also, if you always want delivery sch. to get generated in your normal process, then in the MRP group customising setting you can tick for the del. sch. generations...
Regards
Priyanka.P -
@XmlRootElement is not getting creating while binding XSD
I am trying to bind XSD using XJC binding compiler (JAXB RI 2.0). While creating Java classes, it is not adding the annotation @XmlRootElement.
Because of this I am facing errors "@XmlRootElement missing" while marshalling and unmarshalling the XML documents.
But I tried the samples available with JAXB, those are working fine, ie creating @XmlRootElement annotations.
The following is the XSD I am using (I didn't attach the included XSDs, I can provide if necessary). It is creating the java class HotelResRequestType, but without @XmlRootElement.
I am not sure whether the problem is in XSD or somewhere.
Earlier reply on this highly appreciated.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema targetNamespace="http://www.opentravel.org/OTA/2003/05" elementFormDefault="qualified" version="2.001" id="OTA2005B" xmlns="http://www.opentravel.org/OTA/2003/05" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:include schemaLocation="OTA_HotelCommonTypes.xsd"/>
<xs:include schemaLocation="OTA_HotelReservation.xsd"/>
<xs:include schemaLocation="OTA_CommonTypes.xsd"/>
<xs:include schemaLocation="OTA_AirCommonTypes.xsd"/>
<xs:include schemaLocation="OTA_SimpleTypes.xsd"/>
<xs:include schemaLocation="OTA_CommonPrefs.xsd"/>
<xs:include schemaLocation="OTA_HotelPreferences.xsd"/>
<xs:include schemaLocation="OTA_Profile.xsd"/>
<xs:include schemaLocation="OTA_VehicleCommonTypes.xsd"/>
<xs:include schemaLocation="OTA_AirPreferences.xsd"/>
<xs:annotation>
<xs:documentation xml:lang="en">All Schema files </xs:documentation>
</xs:annotation>
<xs:element name="OTA_HotelResRQ" type="HotelResRequestType">
<xs:annotation>
<xs:documentation xml:lang="en">Sends a request for a ..... </xs:documentation>
</xs:annotation>
</xs:element>
</xs:schema>
Thanks,
SenthilHello Anand,
POTEXTHEADER-PO_NUMBER
POTEXTHEADER-PO_ITEM = 00000
POTEXTHEADER-TEXT_ID = 'F01'
POTEXTHEADER-TEXT_FORM = '*''
POTEXTHEADER-TEXT_LINE = 'YOUR TEXT'
John. -
Accounting doucment not get created for Credit Memo
Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advanceHi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit -
Outbound IDOC not getting triggered while new master data is created
Hi Experts,
I am trying to trigger an outbound idoc for Cost Center master data when ever cost center is being created or cost center is being changed. (Usinf COSMAS)
I have successfully made use of change pointers and now able to trigger the idoc when ever Cost Center is getting changed. But while creating new Cost center, IDOC is not getting triggered.
I used the function module MASTERIDOC_CREATE_SMD_COSMAS for triggering the idoc.
Could one of you please let me what would have gone wrong? Since IDOC is getting triggered while changing the master data but not getting triggered while creating new master data.
Thanks in Advance,
VinothHello,
when you activate BD21 for a message type, it creates a entry in the SAP tables. that these Cost Centers have been sent already and any susequent changes to this will trigger a IDoc.
As for BD16, scheduling it wont help as, you need to specify the selection criteria, and i do not see how you will be able to dynamically get the selection criteria.
Try BD95, and BD59 to create a change pointer for a field, so when ever this fields is modified (new/updated) an idoc will be triggered.
regards,
Abhishek -
Methodology/Processes Not getting reflected while creating a role via BRM in GRC
Hello All,
The methodology I have created is not getting reflected while creating a new Single role.
I have maintained the condition groups properly in decision table, and assigned the same to the methodology as well.
Please suggest.
Thanks
Regards,
ShrutiMethodology is updated when you press save after completing the first step.
can you please share screen shots of configuration and issue you are getting -
Excise invoice should not get created without PGI
Hi,
I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
Kindly advise as to how this can be done.
Regards,
T SaravananDear Saravanan
Two options are there
- in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
- apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
thanks
G. Lakshmipathi -
Infotype 0573 not getting created
Hi All,
We have an R/3 transaction created for leave application and this is showcased in EP6.0 portal as an Internet Service. Now, when we apply for leave using this application through portal, for certain employees, infotype 0573(Absence infotype for Australia PS) is not getting created but 2001 gets created. When we try doing the same through PA30 or through the R/3 transaction itself, everything is going on fine. Only while applying through portal, this issue occurs. This was working fine in EP5.0 portal.
Can anyone suggest a way to sort this issue? Any help will be rewarded.
Thanks and Regards,
LeenaHi Leena
Please note that the function module HR_ABSENCE573_REQUEST_PBS was internally used by SAP only for corresponding ESS services of Leave administration Australia Public sector functionality. The behavior for the function module is as expected, when
called from corresponding ESS services. Further the same function module is currently not enabled to be used outside the same. Also there are no further issues with creation of Infotype records in 0573 and 2001 (which are consistent) from PA30 (Maintain Master data).
Hence would you please check if you are using the standard function module
HR_ABSENCE573_REQUEST_PBS and perform an operation. As I mentioned Function module HR_ABSENCE573_REQUEST_PBS which is currently being used by ESS services for Leave administration.
Regards,
Jun Wu
SAP HCM Support team (AU/AU-PS) -
ESB Instance Not Getting Created
Hello,
I am trying to call one synchronous BPEL using one ESB. This ESB applies DVM while transforming input data into called BPEL format. But it shows some strange results. while calling ESB using any other BPEL
1. ESB instance is not getting created.
2. Synchronous BPEL is getting called but without DVM applied.
But If I use SoapUI to call the ESB, it's working fine. Can any body give me any clue, why is it happing?
Any help is appreciated.
Thanx In Advance,
NitinCan you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N -
Spoo Id not geting created while submitting a program at the background
Hi All,
I am submitting a Z program from other Zprogram. I am actually creating a JOB and submitting the Z program. Please find the code below,
LOOP AT pernr.
CLEAR p_job.
p_stim = p_stim + 120.
CONCATENATE'ITSlip' pernr-low p_job sy-datum INTO p_job SEPARATED BY
space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = p_job
IMPORTING
jobcount = l_jobcount.
SUBMIT zpr022_inncometax_report_copy1
WITH pnptimr6 = 'X'
WITH pnpbegda = period-low
WITH pnpendda = period-high
WITH pnppernr-low = pernr-low
WITH pnpabkrs-low = 'IN'
VIA JOB p_job
NUMBER l_jobcount
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS ls_params
WITH immediately = space
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_jobcount
jobname = p_job
strtimmed = 'X'
PRDMINS = 2.
sdlstrtdt = p_sdat
sdlstrttm = p_stim.
ENDLOOP.
Once the FM JOB_OPEN is called, I could see the job getting scheduled in SM37.
But after SUBMIT and JOB_CLOSE, the job is removed from SM37. But when i go and see in table TBTCP, I could see the job but in the LISTIDENT field i could see 0 which means no spool id is getting created. I want to know why the spool id is not getting created. Please give me your valuable information.
thanks in advance,
BalajiPL change your SUBMIT statement as below..
SUBMIT zpr022_inncometax_report_copy1
WITH pnptimr6 = 'X'
WITH pnpbegda = period-low
WITH pnpendda = period-high
WITH pnppernr-low = pernr-low
WITH pnpabkrs-low = 'IN'
VIA JOB p_job
NUMBER l_jobcount
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS ls_params
immediately = space
keep in spool = 'X'
AND RETURN.
~Suresh -
Maintenance schedule is not getting generated
Hi....
Past one year, maintenance schedule is not getting generated.
Could you please let me know to where i have to look out for this problem in Equipment & Functional Locations?
What are all the fields will be mandatory and triggering the maintenance schedule / Notification in Equipment / Functional Locations?
Need your response at the earliest.
Regards,
Mohd Ali.Hi
There May be several resons...
Check Whether Maintenace for perticualr maintenance plan is not scheduled... their could completion requirement tick might selected previous maint. not done for the equipment.
Check any scheduling for inactive equips/fl
check any long offset has been set....
check while scheduling any sortfield key is set or genral...if pertiucalr sort key is belong to Eq/fl which will not help
regards
krish -
AUC Asset not getting created when Internal Order is created
Dear Experts,
While Creating the internal order ( Object Class - Investment Measure)
AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
Following steps below are configured -
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
Thanks
SanjaiHi Sreekanth,
What is the setting needed to create AUC Automatically when an Internal order is created ?
I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
Any thoughts are highly appreciated
Advance Thanks
Sanjai -
SRM PR is not getting created in ECC backend
Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumaryes, i could see a PR number with all this additional details as below.
Table BBP_PDBEI
CLIENT 453 Client
GUID 4CAEFA58EB9D005CE1008000AC1C2031 Globally Unique identifier
BE_LOG_SYSTEM QA1400 Logical System of Logistics Backend
BE_OBJ_ITEM Follow-On Object Item in Back-End System
BE_OBJECT_TYPE BUS2105 Follow-On Document Object Type in Back-End System
BE_OBJECT_ID 2000000167 Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE Reference Object Type in Back-End System
BE_REFOBJ Reference Object in Back-End System
BE_REFOBJ_ITEM Reference Object Item in Back-End System
BE_REFOBJ_SBITM Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2 Reference Object Type in Back-End System
BE_REFOBJ2 Reference Object in Back-End System
BE_REFOBJ_ITEM2 Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2 0000 Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC Storage location
BE_PLANT 2016 Plant
BE_BATCH Batch Number
BE_VAL_TYPE Valuation type
BE_MOVE_REAS 0000 Reason for Movement
BE_EXPERYDATE 00000000 Shelf Life Expiration Date
BE_PUR_GROUP 206 Purchasing group
BE_PUR_ORG 2000 Purchasing organization
BE_CO_CODE 2000 Company Code
BE_DOC_TYPE CLRQ Purchase Requisition Document Type
BE_ACCREQUIRED Account Assignment for Logical Backend Required
BE_SP_STK_IND Key for Special Stock Section
BE_INFO_REC Number of purchasing info record
BE_MOVE_TYPE 201 Movement type (inventory management)
BE_PACKNO 0000000000 Package number
BE_INTROW 0000000000 Internal line number for limits
BE_ITEM_TEXT Short Text of a Service Purchase Order Item
BE_PO_PRICE 1 Price from Backend
BE_UNLOAD_PT 200 Unloading Point in Backend
BE_DEL_IND Deletion Indicator in Backend Documents
BE_TRACKING_NO Requirement Tracking Number
BE_COND_TYPE Condition Key
BE_COND_STEP 000 Level Number
BE_COND_COUNTER 00 Condition counter
Maybe you are looking for
-
Presenter 8 Installation Problem on Vista Machine
I am installing e-Learning Suite on Vista 32 bit machine, all the software of the suite got installed successfully except the Presenter 8.0. It said some problem with OS version, happenned while installing Presenter. Please help to install this impor
-
Email Alert for Process Chain for ABAP Process Type
Hi BW Experts, I created a process chain based on ABAP Process Type ( for Broadcasting rsrd_broadcast_starter). I want to add alert message for each ABAP process if it is failed. But I cant see any option showing Successfull
-
Can't import from camcorder to firewire drive
I'm having no luck importing video from a digital camcorder to an external firewire drive (using iMovie 6). The playback is OK, but when I try to import the screen quickly goes blue and the importing stops (I get about .5 second of video in a clip be
-
I have a 300 GB Newer Technology drive i use as backup with Super Duper. Anyway I upgraded to Leopard and when I went to backup I didn't realize Time Machine was trying to backup on the same drive. I tried to erase the drive to start over but got an
-
Flash Player 10.1 says it's installed but NO videos work in any browser!
I have spent the last 3 hours trying to get this to work but to no avail. I'm running Windows Vista Home Premium with CA Security Suite. I have IE8 and Firefox and neither will allow me to play videos from any site. I've disabled the firewall. I've u