Schedule proposal in automatic payment.

Hi. all.
May I know  how is the coding/workflow for the Schedule Proposal in the Automatic Payment Transaction (tcode:F110). Because i'm planning to change the way of the standard SAP auto payment proposal. That's mean whenever there are invoice which has amount more than a certain limit, then the system will automatically split into several payment.
Or there are any gud way to do it? Please suggest it.
Thanks in advance.

Anyone know about it ?
Edited by: Jiansi Lim on Dec 11, 2008 5:19 PM

Similar Messages

  • Automatic scheduling of the automatic payment programme

    Hi All,
    My client would like to set up different ways of running the automatic payment programme. They have different payment methods which mean different things.
    First option: They would like payment method P1 for example to run every Mondays and thursdays (on an overnight basis). The payment should clear the specified vendors and transferred to the bank server without any authorisation.
    2nd option: Would like the payment programme to run automatically again this is driven by the payment method and should run overnight, but would require authorisation before the payment can be transferred to the bank server.
    3rd option: To run a  normal payment run on the same day.
    For all options, they would like to send off the remittance advice only when they have confirmed that the payments have gone through the bank server okay.
    Any help will be much appreciated.
    Thanks.

    Hi
    You can do it with the AUTOMATIC JOB SCHEDULING. For this take the ABAPer help.
    1st: For 1st payment method, create one BDC program with all details and the parameters will be constant except the "Run date" and "Next payment date". In TCODE:SM36, you can schedule job at specific time. In that job give this BDC program name.
    Once you do the payment run system automatically, clears the Vendors
    Data to Bank server is possible using the IDoc - ( take the help of ABAPer in developing this IDoc) using the Automatic Job scheduling the IDoc, you can maintain this after completion of the above job. Before to this get the data to be sent to the Bank Server in a template format with SAP field mapping.
    2nd: As this payment method requires the authorisation, you can go by manual execution of the IDoc , instead of the Automantic job scheduling.
    3rd: Same like 1st..but the day of execution will deferrs...(ABAPer will take care of it)
    Disadvantages: 
    - in the BDC program you have to hard code the number range
    - you can't have an option to block / release the block using the edit proposal option
    - IDoc creation depenedency should based on the volume of the payment documents: means after how much time this IDoc job scheduling should happen
    VVR

  • Reason code in automatic payment

    Hi
    Please advice how to add the reason code in change line item while editing the proposal in automatic payment run.
    Thank you

    Hi,
    the reason code is normally used for payments with differences to the invoice amount. In the payment run the invoice would normally be paid fully except you have made some further reduction postings to that invoice so you would pay a reduced amount by selecting the invoice and the credit memos relating to it.
    But there is no option to choose this in F110.
    If you want to pay a reduced amount and have a reason code consider using the manual payment functions (F-53 / F-58).
    Hope this helps
    Hein

  • Scheduling the Automatic Payment program

    Can we schedule the automatic payment program? If so, how?
    The requirement here is that without/limited manual intervention the program should be able to run.

    Hi,
    For sure business cant avoid running proposal because they have to make sure that vendors who needs to be paid were not gone into exceptions for various reasons. You can definatley automate the process once proposal is succesfully executed. I am hoping this request is coming from business because they dont want to stay till 8pm for check run. if the checks are printed onsite there is no point in automating it, if the check printing is done off site by some vendor this is how you can automate the process.
    you create variants for check printing program RFFOUS_C. For the program run date you have to create variant varibale so that it will be updated on daily basis. Proposal Id has to be unique for each company code. Ask business to run proposal with the same Id which you specify in the variant. I am not going in detail about further selections.
    Create a batch job and schedule to run on the day and time you wanted. once the job is succesfully executed a spool will be generated and the checks can be printed.
    I hope it helps,
    Thanks,

  • F110- Automatic payment proposal

    Dear All,
    In Automatic payment proposal below are some issues.
    1. whether it is possible that, upto specifc net due date document can be process/selected in proposal for payment?
    2. Why after creation of proposal, documents posted through special G/L indicator were not selected for payment ?
    3. If a vendor have document posted of Rs 100000 (Credit Balance/ payable) & Rs .20000 (debit balance / receivable) ,then proposal payment to vendor was Rs. 100000, not Rs .80000, Why this is happening.
    Is there any SAP version issues.
    Please reply.
    Regards,
    Avinash S.

    Aziz,
    1. How we can ensure the payment till specified date
    2. We have specified the all Special G/L in T-Code FBZP, but it shows same error as per screen shot in point no.3.
    3.We have assign the vendor in customer master & vice versa, still below error were faced.
    a) Enter a  payment method for incoming payment (Same error occured for point 2)
        My question is if we are making vendor payment then why it is asking for incoming paymenrt instead of outgoing payment method.
    b) If we assign the incoming payment method the it process incoming payment also outgoing payment as per below screen shot. Why it not club togather & make  net payment.
    Pls. reply.
    Regards,
    Avinash S.

  • F110 - Automatic Payment Program - Payment Proposal Error

    Hi Folks,
    I am running Automatic Payment Program on F110. I have completed all the procedure in FBZP.
    The Error is
    Company codes ZZZ1/ZZZ1 do not appear in proposal 07/30/2008 RUN01; correct
    Its says,
    No data exists for the specified paying company code ZZZ1 and the specified sending company code ZZZ1 in payment proposal 07/30/2008 RUN01.
    It will be helpful, if someone can post the remedy.
    Help will be surely rewarded.
    Thanks,
    Matthew

    Hi,
    The dates are not falling in the run date. So please change the dates in the Parameters tab in F110 i.e Posting Dates and Doc. Posted upto.
    Regards
    Balaji

  • Automatic Payment Program Proposal split same vendor invoices

    Hello,
    We are facing some peculiar issue in Automatic Payment Program,when we run the automatic payment program payment proposal split the same vendor invoices into so many differnt proposals instead of consolidated proposal.
    Every time it's not happen to same vendor it's dynamically changing to different vendors.
    Eg:We have 10 vendor invoices and when we run the payment run 2 invoices is coming together and 3 invoices coming together not 10 same.
    I have checked the vendor master data and payment program configuration for payment method for company code there is no tick selected for individual payment.
    Could you some body explain me why system is behaving this way.
    Thanks in advance.
    Regards,
    Satya

    Hello Staya
    Just check the line items of your vendor. Some line items may have the payment methods and some line items may not have the payment method. When you do the run in f110 it culbs all the invoices which have the same payment methods together and make the payments. Pls check this and see.
    It could be the reason if you have not ticked the individual payments in vendor master.
    Niranjala

  • Payment Proposal Error in Automatic Payment Program

    While I am running the Automatic Payment Program Run after passing on the  Parameters, I have created the Payment Proposal.
    When I am trying the edit the payment prosal  to block payment of some of the invoice line items, system is throwling a red signal error (Payment/Exception). I am not able to edit the payment proposal and proceed further.
    Kindly help me out as the proje4ct has gone live and it is a critial requirement.
    Thank you
    Ravi
    Mobile 9849393564

    check with fowlling cases
    1. payment terms
    2. cash discounts
    3. with- holding tax
    4.next payment rundate
    5. check payment block
    let me know even checking of these things u have the same problems.
    just now i discussed u over phone
    if it is userful assgin the points
    regards
    venkat.

  • Automatic Payment Process through Schedule Manager

    Dear Experts,
    I am an infant in SAP..just started my foot steps by formally taking up a sap course from siemens. I would like to get a complete configuration details for the scheduling automatic payment process. The scenario I could think of is a weekly payment run for a company code at 7.30 pm..Please help.
    Thanks,
    Aspirant

    Hi,
    In FBZP you need to do the config. for the automatic payment.
    1All co codes:fill the paying co code.
    2)Paying co codes :give Min and Max amount for payment and form payment advise.
    3)Payment methods in country :In country creat the p.method
    eg: for cheque :pay method 'c',select outgoing payments,check and give document type for paymentand under apyment medium program 'rffous_c'
    4)payment methods in co code:give the same pay method (c)in your co code here and amt lmt and form for payment medium
    5)bank determination:give the bank details i.e crcy,paymethod,house bank,account id,bank sub account,available amts etc.
    6)house banks:give the detials of your bank account.
    there will be no schedule job for f110.
    Further you need to configure check lot,house banks for this.
    regards

  • Encryption of output of automatic payment proposal F110

    Hi Gurus,
    When i run automatic payment proposal (F110), i want an output in encrypted form to be sent to bank.
    Can anyone suggest how to get output in encrypted form.
    Do we use standard Abap or a user exit to get output and then encrypt it or does SAP provide standard encryption solution.
    Regards,
    Rishikesh

    Aziz,
    1. How we can ensure the payment till specified date
    2. We have specified the all Special G/L in T-Code FBZP, but it shows same error as per screen shot in point no.3.
    3.We have assign the vendor in customer master & vice versa, still below error were faced.
    a) Enter a  payment method for incoming payment (Same error occured for point 2)
        My question is if we are making vendor payment then why it is asking for incoming paymenrt instead of outgoing payment method.
    b) If we assign the incoming payment method the it process incoming payment also outgoing payment as per below screen shot. Why it not club togather & make  net payment.
    Pls. reply.
    Regards,
    Avinash S.

  • Park All documents in Automatic Payment proposal.

    Hello ,
    Is there a way to Park all the Documents initially when F110 Payment run is scheduled.?
    I tried BTE 01020 and GGB1 Substitution Populating BKPF-BSTAT = 'V' but failed.
    Please suggest.
    Regards
    Bala.M

    Hi,
    We would like to know why you want to park the documents at the time of Automatic Payment Program ?
    In this case you create payment block through transaction code OB27 and config the same in Payment terms, so that all the documents will have a payment block.
    Please also tick for Change in pmnt prop. so that you can remove block from those documents which you want to make payment and others will be still blocked for payment.
    Regards,
    Tejas

  • Automatic payment issue

    Hi,
    We are in the process of upgrading our SAP system from release 4.6c to ECC 6.0.
    As part of preparation activity, we have applied patches into our production live system (4.6c) from 48 to 54 for SAP_APPL, SAP_BASIS and SAP_ABA.
    Before applying the patch, our automatic payment run executed successfully.
    Using Automatic Payment Program (Transaction code: F110), we have scheduled the proposal with required parameters. After successful generation of proposal, we wanted to edit payment proposal to clear the particular selected line item. We selected required line item to be cleared; however, system is clearing all the line items which are due for payment for the given vendor.This issue started coming after we applied patch level 54 for our SAP 4.6c.
    This is stopped all our outgoing payment to our business partners since yesterday.
    Kindly help us regarding this issue.
    Regards
    vimal

    Hi ,
    What do you mean when you say Invoices were not cleared, are you generating posting orders?
    Secondly either you generate posting orders or payment documents SAP will not allow to further process this documents unless you void and reverse the same.
    Pls be more detailed to suggest a  solution.
    Thanks,
    Praveen

  • Automatic Payment Run-f110 Reg

    Hi,
    I am not FICO Guy.But,I need to run the Automatic payment Run -F110.
    Can you please explain step by step procedure how to run the F110.
    Thanks in advance.

    Select run date and enter and identification
    Enter your parameters, company code payment methods, next pmt date, select the vendors and/or customers
    On the free selection screen you can select values which can be included or excluded
    On the additional log screen select the type of logging that you require along with the vendors and customers
    On the printout data medium screen youcan select a variant to use when running the program
    Save the parameters
    Schedule the proposal and run it
    After proposal has been created verify it is correct
    Schedule the payment run, run it and note posting orders carried out
    You can use SP01 to faciliate the printing of checks
    Then you can create a payment file - FCHX
    Print a list of checks from the check register FCHN
    The following link may also assist you...
    http://help.sap.com/saphelp_47x200/helpdata/EN/01/a9c079455711d182b40000e829fbfe/frameset.htm

  • Doubt in Automatic Payment Program...........

    Hi SAP Helpers,
    I have a doubt in APP. I have configured all settings for app and have maitained all parameters in F110. I am very comfortable till payment proposal creation. here my question is after payment proposal
    1.how to maintain shedule print(what r the req fields to be maintain here),
    2.how to take print checks and
    3.which type of printer can use in real time
    4.and also i heard somewhere, for single checks use one type of printer and for long checks(have 100 checks at a time) use another printer. is it correct?
    please give me your valuable advices for printing checks
    sure will assign points and adv thanks to all
    VK

    hi vk,
    u maintained all the paramater of F110 then u maintain Run date and Runschedule
    Run date means when u execute the programme.
    Run schedule means what is the period ie from to date ex if u want to run  for the month of Nov 07 then u maintain run schedule 01.11.2007 to 30.11.2007. And also u maintain next run date ie if u want to run for a month  period then next run schedule will be if today run date is 01.12.2007 then next run date will be 01.01.2008 . then execute the programme and the print out is mostly Laser print only APP means automatic Payment it did,t take single check it take more checks.
    After executing the programme u go and check the log then u know the details of the vendors and amount also.
    After that go back and go to menu bar systems under this owns pool request and u find the details of check printing.
    Once do this and any quary revert to me.
    Subbu

  • While Running Automatic payment program can't post any of the vendor docume

    Hi Team,
    I am  Running the Automatic payment program in (F110) by assigning all of my company vendors (Ex. 0 to 9999) Normally i will take 10 to 20 hours time to complete the proposal. 
    In time of APP running when i am trying to post the any of the vendor document it is not allowing to post and getting the error as " Account .......... is blocked by the payment run"
    Please give me the solution.
    How can we post any of the  the vendor documents when the  APP is running.
    If the APP runs 20 to 30 hours means we can not stop the  vendor transactions.
    Thanks in Advance
    Vasavi

    Hi Vasavi,
    I understood your question.
    What Iam asking is you to run the APP in background. SAP gives you a option to run the APP in background using T.code F110S.
    If you have multiple company codes and multiple vendors you can break the APP into several runs so that system will not take much longer time.
    The solution given by me will reduce the time taken for APP but it cant resolve the blocking issue. Once your APP runs with in 12 hrs (May be you can schedule a job in night), this may not interrupt the regular business like posting of Invoices in F-43 etc.
    Thanks
    Aravind

Maybe you are looking for