Scheduled date not matching std dates defined

Dear all,
We are facing scenario where when we create process order in the system, The system automatically assign dates of operation to be completed ( Earliest & Latest ) while in recipe we have defined std time for that particular phase. So my query is how system calculates those dates & where i can change or check so that system should throw dates in relationship with STD time provided for that operation.
Because of that we are not able to plan our capacity correctly as system itself showing not expected or correct timing for the operations.
Please refer following screen shot for your reference.
1) Operation screen for process order
Now for phase 0011,
please check phase details.
In formula for resource we have kept OH time as operation time.
So according to me, system should take show
1) for phase 0011 latest start time 07:00:00 & latest finish time 15:00:00 i.e. 8 hrs which is defined in recipe. as of now it shows 07:00:00 to 16:37:27. i.e. 9hrs 37 mins. approx.
Please advise,
Thanks in advance.
Regards,
Deep Dave.

Dear KK,
Please find below SS for your reference.
1) Operation Screen
2) operation timings
3) Capacity header for resource used.
I guess this will be sufficient data to analyze. Please revert your thoughts on same.
Regards,
Deep D.

Similar Messages

  • Any idea what this errorr means? the data type of the reference does not match the data type of the variable

    I am using Veristand 2014, Scan Engine and EtherCat Custom Device.  I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.  
    I created a new Veristand project
    I added the Scan Engine and EtherCat custom device.
    I changed the IP address and auto-detected my modules
    i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
     So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
    Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
    Any thoughts?
    Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Preparing to synchronize with targets...
    • Querying the active System Definition file from the targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.
    • Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Preparing to deploy the System Definition to the targets...
    • Compiling the System Definition file...
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Sending reset command to all targets...
    • Preparing to deploy files to the targets...
    • Starting download for target Controller...
    • Opening FTP session to IP 10.12.0.48...
    • Processing Action on Deploy VIs...
    • Setting target scan rate to 10000 (uSec)... Done.
    • Gathering target dependency files...
    • Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
    • Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
    • Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
    • Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
    • Closing FTP session...
    • Files successfully deployed to the targets.
    • Starting deployment group 1...
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details:
    Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    LabVIEW: The data type of the reference does not match the data type of the variable.
    =========================
    NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    • Sending reset command to all targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.

    Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef?  I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).  
    Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
    You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671  
    Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
    Kevin W.
    Applications Engineer
    National Instruments

  • Photoshop CC on Windows 7 is saving the file "date" as the created date not the modified date

    I have been using a much older version of PS (CS2) and just decided to update to PS CC. I have installed the trial version of PS CC and will begin the CC subscription as soon as the trial expires.
    I have noticed that PS CC saves the (main) date of the files as the "created date" not the "modified date" as it pertains to Windows Explorer and the Windows OS.
    Here is what is happening: I have a file that I created in 2007 that I use for a template. It is sized to specific dimensions, etc. and when I do my save as, it automatically saves into the desired file folder, so that's why I use this as a template. I setup a new photo and then drag and drop it into my template, flatten the image and save as. When doing this with PS CS2, the date for the newly saved file was assigned as the modified date (current date and time). So, when I searched for the file in Windows Explorer or when I went to open the file, the date shown for the file was the modified date. NOW, with PS CC when I perform the exact same process and do a save as, the file date shown in Windows Explorer and/or when I go to open the file is showing as the created date (3/9/2007), the date that I created and saved the template I use. This is aggravating to me because now when I want to open a file and sort by date, the date shown in Windows Explorer is not accurate. As far as I can tell, this only happens in PS CC. When I open an old file with ID CC and do a save as, it applies the current date, not the created date. And, when I was using PS CS2, whenever I did a save as the current date was applied as well.
    In summary, when performing a save as, the created date is being applied as the main date instead of the modified date. The question is: Is there a way to change this so that the modified date can be applied as the main date for the file when performing a save as?

    Below are two files created the exact same way on the exact same computer: the top one was saved in PS CS2 and the bottom one was saved in PS CC. Both were saved using the "Save As" command. You will notice that when the "Save As" command was used in CS2 it updated the "Created:" date, however, in the CC version the "Created:" date was not updated, only the "Modified:" date was updated. Is there a way to update the "Created:" date when performing a "Save As" in PS CC?

  • Planning area data not matching with backup cube / PSA

    Hi friends,
    while loading data from planning area to backup cube , for the key figure ( result of a macro),the data in planning area is not matching with PSA as well as with cube.
    At the same time Data is matching at total level but not at disagregated level. And many times it disagregate in equal Proportion in cube/psa.
    Pls its urgent.
    Pts for sure.
    Vishal.
    9326179903

    make sure you have replicated the extraction of the data source. This is needed to ensure your backup cube gets the current data as in the planning area
    if you got to /SAPAPO/SDP_EXTR then you can see this button
    you can set this up as a program scheduled to run before the updation of your cube
    As for the disaggregation, test at what level you are choosing your characteristic? ( i suppose you can choose the level)
    Are you extracting at a detailed level or at the aggregated level
    Is your macro saving the data into a Keyfigure or is it an auxilliary KF or something?

  • Assignment Dates Do Not Match Task Dates

    I am the functional administrator for Project Server and Project Professional at my company. I have noticed on a few occasions that a Project Manager will set up a fixed duration task, and Project detemrines the start and end date. When he assigns a resource
    to the task, the assignment start date matches the task start date, but the end date is earlier, even though there are no constraints that explain the date chosen. Has anyone seen this?

    Hi,
    Not only have I seen this, I have an example I show in my courses - it is perfectly normal. Assignment "duration" (difference from start to finish) is calculated based on work and units.
    OTOH, you FORCE the task's duration by setting it fixed duration: Project will obey that, so the two values will MOSTLY (not just by accident or occasionally) be different so the end dte of the assignment will be different from the end date of the task.
    On the Gantt Chart you will see a TRAILING SPLIT appear.
    Fixed duration is simply not compatible with effort based scheduling!
    Greetings,

  • 0FC_OP_01 extractor issues- DFFKKOPBW data not matching with

    Hi All
    We have an issue with the extractor 0FC_OP_01. Our business is comparing the values in
    R/3 report u2013 G/L Account Balance Display (t-code S_ALR_87012277)   with the
    Open Items by GL Account report in BW .(actually these values in the BW report are coming from DFKKOPBW table in R/3) .
    But since august, the R/3 G/L account balance report is not matching with the DFKKOPBW table balances. So bottom line the extractor 0FC_OP_01 is doing something wrong when populating the DFKKOPBW table  which is causing these two reports to be out of balance
    Did anybody face this kind of issue before? Please Advise.
    FYI : We are following the same procedure to populate the DFKKOPBW table as in the below article.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a9996115-0b01-0010-b2b2-d9de0170a425;jsessionid=%28J2EE3417800%29ID0001499250DB01896329908162586522End
    Thanks
    KPK

    In my case the Cube/PSA data itself is not matching with the R/3 report data. 
    Basically we run a job in R/3 in t-code FPBW with a Date id and Indentification. This job will pull the entries from base table DFKKOP into DFKKOPBW table .Then FRom this DFKKOPBW table data is loaded into PSA/Cube.
    Here in my case the data in table DFKKOPBW itself is not matching with the R/3 report -  G/L Account Balance Display (t-code S_ALR_87012277)) .
    I am following the same procedure to run the JOb in T-code FPBW to populate the DFKKOPBW table as listed in the document at the above link.  Moreover this difference in balances is occuring only starting from August ..Till July the balances in DFKKOPBW tally with the R/3report.
    Please advise ..
    Thanks
    KPK

  • Multiple Version Issue. data not matching

    Dear all,
    pleas help me in this issue..
    we have the Apo (DP) Cube.  we are running the reports on this cube..
    when we run the query we are giving the Verion ( means week)  in the selections.. data is coming but.not matching with Apo..data..
    we  assumed that data is coming more. beacuse it might taking the data of previous year also.
    so we included the Calyear and aksed user to selct both, vesrion as well as year.. because their req is for multiple version with historical data.
    They want to see the data for multiple versions with historical data...  even though data  is not matching..
    what we had done is again deleting all the data from Cube and dso an datasource , again loading... this time we asked user to run the report and match it    the data is matching.. with vesrion
    But when we go for historical data with mutiple version. its not matching ,
    pleas help me out where to find out this probelm , what could be the cause ,.
    how to chek
    Awaiting your valuble fedback. its an uregnt issue.
    if any thing else required pls let me know

    Txs for your valuble reply..
    We had checked that .
    but when we unload and again loaded  data this time it is matching on giving the version...
    Where as in case of Multiplr versions . data is coming more.. donno wheather it is mixing up the duplicate data . or what not able to underand.
    can you pls tell me steps how to analyse with your patiency...
    Where and all we need to chek ....
    Awaiting Your reply.

  • Inventory data not matching with R/3

    Hi,
    In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
    We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
    But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
    1.What could be the reason?
    2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
    Pls help us with your suggestions.

    We have followed as per the How to handle inventory managment document.
    The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
    But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
    In RSDV validity table date maintained from 1999-Dec'200.
    We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
    Pls help with your inputs.
    Thanks
    Soujanya

  • Data not matching for a key figure in ODS and In CUBE.

    There is one key figure ( Net Units) where in the data is not matching in ODS and in CUBE for only one particular fiscal week (200714)but for the rest of the weeks its matching.
    The data  is  first loaded in to ODS and from there in to CUBE and the source is from flat file.
    The cubes are not compressed .so I checked the DB aggregation in the field selection for output screen but still it’s not matching .( based on the infocube addition property some times if a file is loaded multiple times it adds up in the infocube so when the cubes are not compressed we manually select this option) .
    What might be the possible cause for this ???
    thanks in advance
    jayakrishna

    HI,
    By any chance if you have loaded same the delta twice into the cube, then there might be the chance of the corrupt data. SO identify the lowest level of document where u can identify the difference.I mean if possible 0calday wise or document leve wise or sales org wise etc. and try to find out where is the difference. Then check in the change log of the oDS, whether the request has gone into cube twice. last option is selectively delete the data from the cube for the week and load a full repair from the ODS for that week.
    Sriram

  • Data not matching in RSA3 and PSA.

    Hi,
    I have loaded data into BW from a Generic datasource and the values in R/3 and BW are not matching. Upon analysis, I found that the values for a characteristic are not matching even in RSA3 and PSA. All the values for other characteristics match excepting this single characteristic.
    We have used user exit to populate the fields in the datasource in R/3. According to my knowledge, data in RSA3 and PSA should match. Can someone please tell me how the mismatch between RSA3 and PSA is occurring? Are there are any specific settings that I should be looking for?
    Thanks in advance.

    Hello karthik,
    We have the same problem of difference in RSA3 and PSA data for 1 keyfigure...
    it was a generic data source with function module....
    The reason for this difference is When a record is splitted in to 2 or 3 data packages then you may get some inconsistencies in the data.....
    Try to increase teh data package size and load then you will get the correct data(it worked for us)
    Thanks,
    Pavan.

  • R/3 data Not matching 0PS_C04 cube

    hello guys, we had an oracle upgarde last week and "apprently after the upgarde the data in this cube isn't matching the data in r/3". first i thought may be the data in the cube was inaccurate, so
    1) i cleaned the cube reloaded all the data accordingly, but it seems the error still existed.
    2) Cleared the cube again and reloaded all the data from masters tables, to make sure nothing was missed
    PROBLEM STILL persists,
    Any suggestions?

    Hi,
    U r talking of which Data inconsistency,, is it Project and WBS element Data. If So, There exist Conversion Exit of Project and WBS element Data.
    try these Following Conversion Exits in R/3 and then c how the Data gets changed
    CONVERSION_EXIT_ABPRJ_INPUT    Converts External Project Number to Internal Project Number (Definitio
    CONVERSION_EXIT_ABPRJ_OUTPUT   Converts Internal Project Number to External Project Number (Definitio
    CONVERSION_EXIT_ABPSN_INPUT    Format > Without Edition (Project Number / WBS Element Number)
    CONVERSION_EXIT_ABPSN_OUTPUT   Format > With Edition (Project Number / WBS Element Number)
    CONVERSION_EXIT_ABPSP_INPUT    Conversion External > Internal WBS Element Number
    CONVERSION_EXIT_ABPSP_OUTPUT   Conversion Internal > External WBS Element Number
    assign Points if helped
    Thanks

  • Query for Old Data that does not match New Data within a given time period

    Hello all,
    One of the reports I need to create is for all associates who went from one department to another within a given time period. The way I ran this report in Reportsmith (pulling from our old system) was to compare the dept field from the beginning date to the dept field at the end date and it would give me those associate's that had moved. I had to do it this way b/c dept changes can happen using several different types of actions (supv change, promotion, etc.), none of them exclusive to just dept changes. We are now using Oracle HRMS and I need to create this same report with this system using SQL.
    Does anyone know how to compare data between two different dates and pull the ones that don't match? Your help will be GREATLY appreciated!
    Warm Regards,
    Yasmin E. Alberto
    HRIS Analyst
    [email protected]

    Hi, Yasmin,
    In the sample data you posted, nobody changed departments between May 1 and May 11. In fact, there were no assignments of any kind between January 16 and May 17, so I wouldn't expect any output for that period.
    A person (or rather, a duck) did change deptartments on May 20, so if you change the upper limit of the date range to
    AND    ASG_LAST_UPDATE_DATE < TO_DATE ('05/21/09', 'MM/DD/RR')you should see her.
    You've probably noticed that this site likes to compress white-space.
    To post formatted text (such as table results or indented code) type these 6 characters:
    (small letters only, inside curly brackets) before and after sections of formatted text, to preserve spacing.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Bpc input schedule does not show all data

    Hello gurus, i have i question, a bout the following situation:  i am using SAP BPC 7forNW , and i am creating an input schedule , it has account and entity, so i  capture several values and then send data, and then appears  a message , like this "all values were sent ,zero failed."
    But, at the end, only a few of the sent values are shown, several of them disappear with no pattern, and in BI7 all of them appear correctly
    What can i do in order to show all  of the values that were caprtured in that input schedule?
    Best regards

    Hi,
    The easiest thing you can do is that just remove some of the data from excel cell and "Refresh and expand" the Input schedule after you send the data to see whether you get the data correctly.
    Sometime refresh more than once and see you get the data.
    Optimise the application as well.
    Hope it helps
    Raman

  • Dba scheduler jobs not shown any data in dataguard

    Hi All,
    If I query the following sql statement (select * from dba_scheduler_jobs) in primary database we can able to see the data, But I have tried the same sql statement in dataguard not retrived any data. Hence can you please help me out regarding this.
    DB version: 11.2.0.3
    OS version: 5. 10 solaris
    Note: dba_jobs view are fine in both the databases.
    Regards
    RK

    You should load the data into a third, background sheet that the user cannot see[Sheet3]. Then parse the [Sheet3] rows for data, copy the rows with data to [sheet1] and the rows without data to [sheet2]
    Something like this for each row:
        Sheets(3).Select
        Range("A2").Select
        Range(Selection, Selection.End(xlToRight)).Select
        If Application.Worksheetfunction.CountA(Selection)> 0 Then
         'copy/paste into sheet 1
        else
           'copy/paste into sheet2
         End If regards,
    Robb Salzmann

  • Event dates do not match photo dates

    The event dates shown on the left side panel for a number of photos downloaded from SD cards or synced from iPhone/iPad are not reflecting actual dates of the the photos. They are months apart. For example:
    Events are dated      Photo correctly dated
    15JAN12                     15MAR13
    16JAN13                    16JUN13
    14JAN14                    14MAY14
    So ALL event entries show JAN with the correct day and year, while photos display correct date.
    I'm bffled.
    Have attempted to merge two events (with intent to re-split), but event merge option is disabled.
    I'm baffled. Can anyone suggest a cause and a fix? Welcome your comments....Hal
    OSX 10.9.3
    iPhoto 9.5.1

    Check you camera to make sure it's set to the correct date.  Next, check the System/Date and Time preference pane to see if you have a custom date format set.  That can cause errors in dates.
    Do all of the photos in a particular event have the same date?  If there is only one photo with a different date it can set the Event date off.
    As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?

Maybe you are looking for