SCHEDULED REPORT RUNS FINE BUT UNABLE TO PULL UP THE RESULTS

Hello all,
I can create a new report in against Discoverer with no problem. The report can be run as a scheduled report....and the
results pulled up with no problem.
EXISTING reports that were converted during our 9i to 10G can be scheduled and run. However, when the user attempts to see
the results they receive an error message stating:
The results run for this scheduled workbook can no longer be used because the query has been changed.
Do you want to query the database for the new results?
After installing a patch some of the workbooks were able to be retrieved. It seems like there is some commonality in the workbooks that don't seem to work from the scheduled reports. It seems that any workbook that has an admin created calculation in the EUL as one of the selected fields or as a condition of the report, causes a problem.
If anyone of you came across this situation please guide us.
Thanks
Manohar

Hi Manohar
By resaving I mean opening the workbook in Plus then clicking the Save button to force Discoverer to save a clean copy. You should then reschedule this and see what happens.
Here's another trick from way back in the early days of Discoverer that might help. You said that the issue was with an admin created calculation. So, try this:
Create a brand new calculation in your workbook and load the admin calculation into it. Then change all references for the admin calculation, conditions etc, to point at the new calculation.
Believe it or not, this trick can sometime force Discoverer to work when it otherwise will not. At any rate, its worth a try don't you think?
Best wishes
Michael

Similar Messages

Old mailboxes are no longer in my toolbar. I am able to search and find the messages, but unable to pull up the mailboxes.

The mailboxes I created are no longer showing up in my toolbar. I have tried all the suggestions found here, but nothing works. They are not showing up in Library either, however the mailboxes do still exist because when I do a search in mail, the messages come up and the correct mailbox is indicated with the message. I can't find them with time machine, because that requires you to click on a specific mailbox in order to recover it.

Thanks for the suggestion but it did not work. I looked up how to re-index and followed the instructions. I found the files in the library to delete and did so. While watching the progression on the screen I saw each (missing) mailbox name come up and be processed. I was hopeful! However, in the end, my toolbar still only shows three "on my mac" mailboxes, two of which I don't even recognize. One of them is labelled "IMPORT" and has 15977 emails, but when I click on it nothing happens.

Report runs fine from CR 2008 Developer, but will not run once published

I have BO RAS12 (version 12.3.0.601) installed on a Win2008 machine. This is the "backbone" for a proprietary Reporting Suite for a Lawson ERP system.
I have one report that takes awhile to generate due to the number of records and complex summaries and grouping.
This report runs fine in the CR Developer on the server, but once I publish it and try to view with data refresh, it throws an 'Internal Server Error'.
I don't think this is a timeout problem as it throws this error within 5 minutes of attempted generation. To make matters worse, nothing is logged anywhere when it fails.
I know that this doesn't give much to go on, but any ideas?

i had the problem quite often, since i always forgot to tag the UI capabilities of my transaction.
There are several problems with your transaction that COULD be the reason.
Make sure the gui for windows is tagged.
Then, if first what you show is a selection screen, make sure the transaction type is the right one "reporttransaction (Programm and selection screen)".

Report running fine via se38 , but not with tcode.

I had made a alv report, and had assinged TCODE.
When running via tcode > in selection screen i had given all the input data in selection fields,>After that when clicking the execution button> ITS GOING BACK TO SAP SCREEN.
BUT.
SAME report when running through SE38, its running fine..
I had debugg the program , and what find that when running throug TCOde , After AT-SELECTION SCREEN EVENT , ITS COMING OUT TO SAP MENU WITHOUT TRIGGERING THE START-OF-SELECTION EVENT.
HELP ME...

Please follow the steps for creating a transaction for report..
GOTO SE93
Give the transaction code.
Press create button..
Enter the short description..
Choose the radio button which says "Program and selection screen(report transaction)".
Press Enter..
Give the program name..
Remove the Selection screen "1000" if you want.
Save the transaction code..

Data missing in InfoView report but Crystal Report runs fine on my PC

I have created a Crystal Report (XI) which combines data from 2 datasources. Firstly from a postgres db (connected to by ODBC) and second from an Informix db (connected to by ODBC).
The report runs fine on my PC but when I publish the report into Business Objects XI and run the report in InfoView, the report runs successfully but displays no details rows. The title, page headers, group headers all display but no data detail rows are shown. There is no conditional suppression on the details section of the report.
The ODBC drivers install ed on the Business Objects XI Enterprise server are the same as the ones on my PC.
If the report is adapted to only use just one of the datasources then it displays the data fine in Business Objects. So it is just when the datasources are compbined in one report that the data is not displayed.
Any Ideas?
Keith.

Post your question to the Business Objects Forum

Report runs fine on some workstations, won't refresh on others--WHY?

I have a variety of professionally-written reports that run and refresh properly on some of our workstations here, but will not refresh on other workstations...why?
Upon attempting a refresh, I get the following error: "Ther remaining text does not appear to be part of the formula." The formulas window also opens and shows the "error" in the formula. However, the formula is correct, and as I said, this same exact report runs fine with no errors on other workstations. All of our workstations are the same, running Windows XP Pro.
I am running Crystal Reports 8.5 on all machines. I did try installing the trial version of Crystal Reports 2008; however, the same error appeared. I have since uninstalled it and reverted back to 8.5, the version for which the report was written.
WHY?
Thanks

We've had this problem for several years. Today I actually fixed it. I copied all the dll files from C:\Windows\Crystal from our server (which the report would run fine on) and pasted to the same directory of the problem workstation(s), not overwriting any identical files. There were probably 13 missing dlls, and this seems to have solved the problem.
Thanks

Firefox is running fine, but when I maximize it I see the close, restore down and minimize button and the background I have running behind firefox.

It's running fine, but something did crash and I cant see anything it's not even white I just see whats running behind it.

This began to happen to me when I tried to run two separate profiles simultaneously on the same installation of firefox with -no-remote

Landed Cost manager Program is scheduled to run everyday but it did not run

Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
Thanks
De

1006390 wrote:
Hi All,
Landed Cost manager Program is scheduled to run everyday but it did not run for 2 days and there was no error; it did not start even though it is a scheduled prog to run every 30 mins.
Please let me know if anyone has experienced similar cases before; also let me know if you have any clue for above? I am also researching on if there is any way to send notifications when a scheduled prog did not run even.What if you submit the request manually, does it work?
Assuming no error can be found in the DB/CM log files, have you verified the scheduled settings for this program? Try to schedule it again and see if this helps.
Any suggestions are welcome and also would like to get your thoughts on notification part if this is possible to track.
http://docs.oracle.com/cd/E18727_01/doc.121/e12951/toc.htm
https://forums.oracle.com/forums/search.jspa?threadID=&q=Notify+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

CRS 2008 Scheduled Report Runs Twice

All,
I have been using CRS 2008 for about 6 months now and have had scheduled reports running since the beginning. Last month I created new schedules for each report and deleted the old schedule. However, although the old schedule no longer shows in the History tab, it appears to still be running. As of right now, I have only one schedule per report, however, each report gets processed and saved out twice. This did not start happening until I created new schedules and deleted the old ones.
Is there something else I have to do (or can do) in order to completely remove the old schedules or fix the new ones if that happens to be the issue?
Thanks,
Tom

Fritz,
Each report (of which there are 9 at this point), is set up in the following manner:
1. Scheduled to run once a day (times staggered by 5 minutes for each starting at 12:15am)
2. 6 are delivered to a folder on the network, 3 are delivered via email
3. All have the same naming structure: InstanceTitle_DateTime.FileExt
4. Each are formated as PDF
Originally, the six that are delievered to a network folder were also delivered via email as well. This issue only started happening after I deleted those email deliveries. Also, the 3 that are still delivered via email and have never been modified after first being set up are now being run twice as well.
After looking in the network folder this morning, it appears that only four of the six were run twice last night, while all six were run twice for the two nights before that.
This is very frustrating since I have already deleted and started from scratch and still have this issue. Any help would be greatly appreciated. Thanks.

MOVED: Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

This topic has been moved to Overclockers & Modding Corner.
Athlon 3000 + K8N Neo Runs Fine but cannot overclock......

Hi Turfman, go to the end of this mile long thread:
https://forum-en.msi.com/index.php?topic=80211.120
Or take this shortcut:
http://www.madshrimps.be/?action=gethowto&number=5&howtopage=145&howtoID=58
Let us know what you got...if this becomes more of an OC thread, it may get moved...

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.
I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

Since updating my IPhone 4 to IOS 6, I am unable to pull up the list of Purchased apps under the Apps/Updates.

Since updating my IPhone 4 to IOS 6, I am unable to pull up the list of Purchased apps under the Apps/Updates. I suspect I am too low on RAM to load the entire list of purchased apps. Any solution?

Hi Urs
I searched a lot and maybe found a part of the reason for this high data traffic.
I'm synchronizing my contacts, calendar & reminder with iCloud & my mail with Hotmail.
When push is activated for Hotmail, that doesn't matter, but when push is activated for iCloud, the amount of data nearly explodes. So I turned iCloud to manual and let Hotmail on push.
Contacts, calendar & reminder are synchronizing when opened (I think this is enough).
Also I do a backup on iCloud and than I deactivate the function (I do not delete the last backup, I only deactivate the option for automatic backup).
It seems, that the backup functionality also generates traffic when not on WiFi - especially at night!!
The battery life has been getting better, when I deactivated the support for automatic time zone changes (location services were always on).
The battery finaly got MUCH BETTER since the update on iOS 5.0.1.
My traffic is actually higher than on iOS 4 but not so high as before I deactivated some services...
I hope this info is a little help for you!!
Let me know if this works for you, ok?
Best regards,
Wolfgang

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

Hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

https://discussions.apple.com/message/23791369#23791369
https://discussions.apple.com/thread/5325044?tstart=0
more
https://www.google.dk/search?q=restore+iphone+error+29&oq=restore+iphone+error+2 9&aqs=chrome..69i57j0l5.4603j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

SCHEDULED REPORT RUNS FINE BUT UNABLE TO PULL UP THE RESULTS

Similar Messages

Maybe you are looking for