SCM - ERP Integration

Hello,
we have the following scenario:
- ECC 6.0
- SCM 5.0
- XI 7.0
We are designing application architecture. We are defining integration between SCM (former APO) and ECC.
For every integration <b>based on ALE</b> we are thinking of using XI as integration middleware (es. Master Data transfer between ECC and APO).
Does anyone have any esperience on this?
Thanks in adavance
Antonio

Antonio
Am not sure if you have had a look at these links ...
http://help.sap.com/saphelp_scm50/helpdata/en/20/f8c3f6c51341f69250601bce90a4b1/content.htm
https://websmp108.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700008969412004E
they are general help files but can be a good starting point if you have not looked at them...
sorry cant add anything from experience in this area.

Similar Messages

  • ERP integrator target applications greyed out

    Hi all,
    I'm configuring the ERP integrator within EMPA (to use with FDM later) but when registering target applications three of the four are greyed out.
    I have tried to delete and refresh them, re-deploy and so on but they stay greyed out.
    Can anyone tell me how to re-activate the target applications so i can select them again?
    Thanks,
    Marc

    Hi All,
    Did any of you had success in configuring FDM with ERPI. I am trying to configure FDM+ERPI for extracting data from Oracle Financials R12 and load it into an EPMA Planning application. When i go onto create a Metadata Rule and click on the Add Dimension button, the next page gives an error stating: There are no more dimensions remaining to be mapped under this application. and the dimension drop down in the target application area remains empty. Any idea why this happens? My Hyperion version is 11.1.1.3. I also downloaded and applied latest available patch of ERPI but no results.
    Thanks & Regards,
    Muhammad Jamshaid Nawaz

  • ERP Integrator

    Hi all,
    We have requirement to load data from oracle GL to Hyperion planning by using ERP integrator and ODI.
    We configured the source system in ERP integrator and ODI.
    When we try to Intialize the source system in ERP integrator,we are getting error in ODI operator "Table or View does not exists"
    Thanks

    Hi Murali,
    1. I have faced this issue recently ,and the solution is very simple .Go to your browser -> internet settings -> language settings -> add english US here .
    2. Restart the ERP services, and check after logging into workspace , if you still have $
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • FDM mapping in ERP Integrator

    Hi, all of you
    I'm now thinking of the way to connect Oracle EBS 12.1.1 and Oracle Hyperion Financial Management, Fusion Edition 11.1.1.3.0 with ERP Integrator.
    In the introduction section in ERPI admin guide, ERPI is mentioned as a module of FDM.
    However, as far as I read the later sections in the guide, FDM is needed only if the user wants to use "FDM mapping."
    Is my understanding correct, and EBS and HFM is connected only with ERPI (without FDM)?
    And, if you know the advantage of using FDM mapping (I couldn't understand, actually), please tell me.
    Thanks in advance
    Yoshiki

    FDM is not required.
    The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
    Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
    Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

  • ERP Integrator Source Informations

    Hi All,
    I would like to know whether ERP Integrator will support the External feed file(from any other source system) to Hyperion Applications. ERP Integrator will support all ORACLE ERP & HR Modules, but in terms of external system likes Customized ERPs it will support or not. I understood from the below content, it will support the external system through Open Interface Adapter. I couldn't find any document on Open Interface Adapter.
    Anyone having the experience on the above scenario, Please share your experience and let me know is there related document or URL..
    I got the below content from the Oracle documents:
    ERP Integrator supports general ledger data for:
    Oracle E-Business Suite 11i
    Oracle E-Business Suite 12
    Oracle Fusion Financials
    PeopleSoft Enterprise Financial Management 9.0
    PeopleSoft Enterprise Financial Management 9.1
    PeopleSoft Commitment Control
    SAP ERP Financial
    JD Edwards General Ledger system
    ERP Integrator supports human resource data for:
    PeopleSoft Human Capital Management 9.0
    Integration includes data load and drill through. The integration is supported for the following SAP ERP Financial modules:
    General Ledger
    Profit Center
    Cost Center
    In addition ERP Integrator provides support for Open Interface Adapter. The Open Interface Adapter allows you to import data from any source system using the interface table.
    Thanks,
    PC

    Hi All,
    Got the Answer, The ERP Integrator will support external feeds files through FDM as well as they introduce Open Interface Adapter for flat files in new version(11.1.2.2). Please refer FDM ERP I read me document for more details. Currently i dont have any information for Open Interface Adapter. I will let you post the same once i got the reference materials.
    Thank you for all your support.... :)
    Thanks,
    PC

  • SCADA - XMII - ERP integrations through SAP PI

    Hi Experts,
    I have an integration scenario comprising of a SCADA system & SAP ECC. Could anybody suggest some document / send reference links on SCADA - XMII - ERP integrations through SAP PI.
    Useful response would be appreciated.
    Regards,
    Santhosh

    SCADA-XMII integration
    Scada system should always remain connected to some Historian system. You can directly connect to SCADA system to xMII using vendor specific UDS (Universal Data Servers) Like Citect UDS ...
    If vendor specific UDS is not available in MII then you can make it possible if the SCADA system is OPC complaint, through OPC UDS DA, but it provides only current data without any mata data information.
    As a robust business practice it is not recommended to use direct SCADA connectivity to xMII, it should go through some Historian( Citect, Wonderware, Siemens...many more) so XMII will be able to get all plant floor operations data in history & current modes.
    XMII-ERP Integration
    XMII supports IDOC & BAPI communication with ERP system using various SAP connectors available in XMII as in SAP BC, SAP JCO.
    Specific to PI Sheet, you can download various control receipe, process orders data using IDocs.
    BAPIs can be used to do "process order confirmations" back to ERP system and make changes in process data.
    Let me know if you would like to know about specific SCADA system- xMII connectivity or specific activity in PI.
    Thanks
    Ram Upadhyay

  • Target registration in ERP Integrator in the Workspace

    Hi,
    I'm trying to integrate HFM 11.1.1.3 with E-Business suite R12 using ERP Integrator. Actually, I want to load journal entries from EBS in HFM.
    I've successfully registered the source (EBS) and I filled all the ODI details, but I can't register the target (HFM) as the "Target Application" field is empty although I've created application in hfm and in workspace.
    I'd appreciate any help.
    Thanks in advance.
    Ahmed.

    FDM is not required.
    The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
    Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
    Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

  • Can't See ERP Integrator in Workspace

    Hello,
    I have installed and apparently successfully configured ERP Integrator on 11.1.1.3, Windows 2003 R2. Now when I goto workspace -> navigate -> administer I don't see ERP Integrator. Bear in mind that I do not have ODI installed yet, (for various reasons) on this machine. Is this the cause of the issue? I am aware that until I configure ODI I can't really use ERPi, but I just wanted to verify.
    Also when I goto the following link : http://machiney:6550/aif/faces/setup/Main.jsp I get a message saying I am not authorized to access this page. I am logged in as administrator.
    by the way, I did restart the services and I also tried rebooting the server. Didn't work.
    Any guidance will be appreciated.
    Edited by: EssbaseApprentice on Dec 31, 2010 7:01 PM

    Hello EssbaseApprentice,
    Any product that is either installed/configured/deployed via the EPM Configurator AFTER Workspace has been deployed will not be reflected inside of Workspace. This is becaues the Workspace configuration stores static content in an .XML file of the Application tier and is not dynamically driven. You will need to redeply Workspace to have all changes reflected and demonstrated.
    Also you can not go directly to most products starting in v11.1.1.3.00 as they will require the SharedServices SSO token to process as most products will not have a direct logon page going into the future. Workspace will be a requirement.
    Thank you,

  • Loading Alias from EBS to planning through erp integrator

    Hi all,
    Can anybody tell me how to load the member properties from EBS to Hyperion Planning using ERP integrator. My trial only loaded the members with few default properties.
    My planning application is classic. And i used mapping type as "single segment". Didnt find any detailed options there to define the member properties.
    Thanks

    Hello,
    I do not believe storage type is available.
    The Alias is based on the languages you have defined when you setup your applications inside of ERPi. Not all "aliases" will come over; and only the basic information is actually stored as a description. I would suggest you review the ERPi Admin guide for your release.
    Please review the documentation completely and ensure you understand it. The most current documentation can be found at the following URL.
    http://download.oracle.com/docs/cd/E17236_01/epm.1112/erpi_admin.pdf
    Information retrieved from the source can be found on Page 31.
    Information about aliases can be found on Page 34.
    Thank you,

  • Error: Select directory for export- ERP integrator

    Hi,
    I try to export member mappings from ERP integrator 11.1.2.1.501. It Showing the error, "Error: Select directory for export".
    Which directory should be selected here.
    Pls anyone give me a solution to solve this issue.
    Thanks
    Edited by: 3088 on Jun 19, 2012 9:33 PM

    You can choose a directory local to the ERPi server in the environment.

  • FDM and ERP Integrator Module

    I am trying to select the correct ledger from the Oracle E-Business Suite. Within the ERP Integrator area in EPMA, I am trying to select the ledger, when I select the entity for integration.
    Select Source Accounting Entity for Integration screen returns no rows.
    Any advice?
    I was thinking it has to do something with ODI and specifying which Oracle E-Business Suite segments/books to pull data from. Has anyone seen a setting for a Oracle EBS segment/book in the topology manager?
    Edited by: user8702914 on Oct 22, 2009 10:39 AM

    Hello,
    FDM is supported to Oracle RAC but not the ERP Integrator. If you see the 11.1.1.3 support matrix oracle has updated on the last tab telling that FDM will support. ERP Integrator is a new product and it was never designed or tested to be on Oracle RAC. This is what the information we got from the Oracle support when we were doing our in house testing for 11.1.1.3
    Thanks

  • How Enabling ERP Integrator Drill Through from a Grid

    Hi All,
    Can any one tell me how to see the source data by using FR.
    some where i saw we can see this by using Enabling ERP Integrator Drill Through from a Grid.
    but i dont know how to set this...
    can any one help on this...

    Incidentally we had been trying to use Essbase studio as an option.But there are 2 oints that we are trying to investigate.
    1) Can we bypass deployment of data and metadata everytime through Essbase studio after the initial outline is delpoyed? In the system architecture the relational tables are populated using ODI. We would like to load the data and metadata through ODI into the cube. Eeven then can we implement drill thru bypassing deployment through Essbase Studio?
    2) If Essbase studio is imperative for drill through then what are the batch automation options for deployment through Essbase studio? Ideally the option should be after the relational tables are populated through ODI then the Essbase deployment should be invoked and batch script should load the data and metadata through Essbase Studio.
    Please advise.
    Thanks,
    Anirban

  • Regarding ERP Integrator

    Dear All,
    I have few doubts on ERP Integrator.
    1) What are things required from Oracle GL to Planning for Data Loading using ERP Integrator? (Trail Balance is enough or we required some other file from Oracle GL)
    2) Is there any scheduling options available for Data loading using ERP Integrator?
    3) what is process for loading the data to Planning using ERP Integrator?
    4) How we load the data to Planning? (i.e. monthly load, hourly load)
    Is there any document is available for ERP Integrator in detail?
    Anyone please guide me in this situation.
    Thanks,
    PC

    Hi,
    I think it is worth having a read of the documentation first :- http://download.oracle.com/docs/cd/E12825_01/epm.111/erpi_admin.pdf
    It should answer many of the questions you are raising.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • ERP INTEGRATOR and FDM

    Hi All
    We have new  requirement our Source is PeopleSoft from that we want to load data to essbase and planning  using ERP Integrator
    Previously we use to get text files from Peoplesoft and we use to load it FDM  to Planing & Essbase
    What are prerequisites  to connect to Peoplesoft -> ERP Integrator -> FDM 
    Do we require ODI to connect to Peoplesoft ?
    Can anyone explain  me the flow
    Thanks,

    Hi Tom
    We are using
    1. Hyperion 11.1.2.2  Essbase ,Planning and FDM
    2.ODI 11g
    3.Now we want to Connect to Peoplesoft using ODI -> ERPi -> FDM ->Essbase and Planning
    One is connecting ERPi & FDM through the use of the appropriate adapter, and additional metadata information.
    If possible can u explain the above clearly
    Thanks

  • ERP Integrator Download

    Hi,
    I am trying to find ERP Integrator to download from edelivery.oracle.com but I could not find the ERP Integrator, in which product should I look for download ERP Integrator ?
    Thanks

    I think you are best posing the question at Oracle, maybe raise a call with them.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for