SCOM Alert connector fighting with AD connector?

I am experiencing some conflicts between the Operations Manager Alert connector and the Active Directory connector. They are both updating the same property values, but the values are not the same.
Example:
A User changes Department, and the Department property in Active Directory are modified with the name of the new Department
The Active Directory connector modifies the value of the User Objects Department property in the Service Manager Configuration Management Database
Then the Operations Manager Alert connector modifies the same property on the User Object with the old value.
Have someone seen the same behavior?

Perhaps correct the bad data in the Ops Manager system?
In all seriousness, the problem with this behavior is that you have two systems that disagree on the value of a property of an object. the behavior you are seeing is them disagreeing. to quote microsoft, "This behavior is by design"

Similar Messages

Mapping information to SCOM Alert "Path" field through the connector

Hello,
We are using the Oracle Enterprise Manager connector (link to the guide: http://docs.oracle.com/cd/E11857_01/install.111/e14736/toc.htm) to send events from OEM to SCOM.
According to the Oracle connector documentation, the Target host parameter from OEM can be mapped with one of the SCOM Alert custom fields paramaters.
The issue is that we need to have this parameter mapped with the SCOM Alert Path field instead of Custom field.
Is it possible from the SCOM side to accept custom values and assign them to Alert Path field through the connectors?
Thank you a lot in advance!

Hi
Alert path is read only property for alert, you can not change this parameter. you can use custom field(1 to 9) or Ticket Id for alert.
Regards
sridhar v

SAP.connector.rfcLogonException with SAP Connector

I'm having an error when I try to connect to SAP:
SAP.connector.rfcLogonException: You are not authorized to logon to the target system.
The code is part of a sample program located in CodeProject, the example is complete. I can't install the .Net Connector because I use C Sharp express, so the program doesn't install.
Any help?
TIA

Assing the profile R3_BASIC to RFC user id in SU01 and try it.
Basis consultant will be able to help you on this.
Thanks & Regards,
Govind.
Message was edited by: Govindaraju A

Issue with SCSM to SCOM Alert Connector when AOI is Connected?

Hello Azure Operational Insights forum,
I'm trying to connect my Server Manager (SCSM) instance to my Operations Manager (SCOM) instance. However, I get this warning message when I create the connection:
"Found at least one other alert connector in Operations Manager. Alerts may not be routed as expected if multiple connectors subscribe to the same alert."
There "was" a connector previously, but I followed Kevin Holman's blog to remove it. Now everything looks okay (at least as far as I can tell).
At this point, I wonder if the System Center Advisor (now renamed Azure Operational Insights) connector is cause the warning message I listed above when setting up an Alert Connector in SCSM? It's the only "Alert Connector" in the list.
Has anyone else had this issue?

I have also found this warning message. In my case, this is a new connector to a new SCOM Mgt group. the management group in SCOM is connected to AOI.
Repo:
1. Install new OM
2. Configure AOI connection
3. Create SCSM OM Alert Connector
Warn appears after entering SCOM Server details and run as account and continues until Connector is created
The warning does not appear to affect the operation of the connector based on initial tests performed.

SCOM Alerts Connector run as failed

Hi
I have setup the SCOM alerts connector in SCSM but after that i starts to get wernings in scom on servers there are in a difrent domain.
werning:
Description:
The Health Service cannot verify the future validity of the RunAs account Domain1\SCOMAlertsConnectorUser for management group SCOMMG01. The error is Logon failure: the user has not been granted the requested
logon type at this computer.(1385L).
SCSM and scom is in domain1
the servers i got the werning on is in Domain2
what can i do to fix this?

The connectors runas account must be administrator in SCOM (as I recall). Is that the case for Domain2?
Cheers,
Anders Spælling
Senior Consultant
Blog:
Twitter: LinkedIn:
Please remember to 'Propose as answer' if you find a reply helpful

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

SCSM to SCOM Alert Connector Error

Hello,
Long story short, the SCSM admin created an Alert Connector between SCSM and SCOM, then uninstalled SCSM and started over. That means I had an orphaned SCSM connector in SCOM.
In order to set up a new connection, I followed the instructions found in Kevin Holman's blog post:
http://blogs.technet.com/b/kevinholman/archive/2012/09/28/opsmgr-2012-how-to-delete-an-old-product-connector.aspx
Now, when I try to re-create a new Alert Connector, I get this error:
"Found at least one other alert connector in Operations Manager. Alerts may not be routed as expected if multiple connectors subscribe to the same alert."
I checked the SCOM server to make sure there were no orphaned connectors by running this SQL code against the OperationsManager database:
Aside from the copious number of SCVMM connectors, there were six connectors. Of those six, the previous SCSM connector is marked as "IsDeleted":
Next, I checked the "Microsoft.SystemCenter.Notifications.Internal" management pack to verify that there are no orphaned subscriptions. The ONLY alert referenced is for the "Advisor Data Connector".
At this point, my questions are as follows:
1) Will the System Center Advisor (now renamed Azure Operational Insights) connector cause the warning message I listed above when setting up an Alert Connector in SCSM?
2) Is there another orphaned entry in SCOM that I need to check for and remove before setting up the SCSM alert connector?

Hi,
I would like to suggest you remove the subscription that was orphaned. When remove a connector we should remove the subscriptions first.
And here is a similar thread
SCSM 2012 Cannot create SCOM Alert Connector
https://social.technet.microsoft.com/Forums/en-US/a5d0b921-bb0a-43b8-99ca-8b0112ab3bf0/scsm-2012-cannot-create-scom-alert-connector?forum=connectors
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Problem with mail connector example included in Sun ONE application server

Hi,
I am trying to deploy the sample application "mail connector" provided with the Sun One Application Server 8. the application has a MDB which polls for new messages for a user on the mail server. This application deploys successfully, but while connecting to the fastmail IMAP server, it gives the following exception :
ERROR when attempting to open this mailbox: [email protected]
Error in allocating a connection. Cause: Connection refused: no further information; nested exception is: java.net.ConnectException: Connection refused: no further information javax.resource.spi.ResourceAllocationException: Error in allocating a connection. Cause: Connection refused: no further information; nested exception is: java.net.ConnectException: Connection refused: no further information at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:283) at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:193) at com.sun.enterprise.connectors.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122) at samples.connectors.mailconnector.ra.outbound.JavaMailConnectionFactoryImpl.createConnection(Unknown Source) at samples.connectors.mailconnector.servlet.MailBrowserServlet.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:767) at javax.servlet.http.HttpServlet.service(HttpServlet.java:860) at sun.reflect.GeneratedMethodAccessor102.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAsPrivileged(Subject.java:517) at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282) at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257) at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55) at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161) at java.security.AccessController.doPrivileged(Native Method) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551) at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:185) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:653) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:534) at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doTask(ProcessorTask.java:403) at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:55) Caused by: com.sun.enterprise.resource.PoolingException: Connection refused: no further information; nested exception is: java.net.ConnectException: Connection refused: no further information at com.sun.enterprise.resource.NoTxConnectorAllocator.createResource(NoTxConnectorAllocator.java:89) at com.sun.enterprise.resource.IASNonSharedResourcePool.createResourceAndAddToPool(IASNonSharedResourcePool.java:1111) at com.sun.enterprise.resource.IASNonSharedResourcePool.createSteadyResources(IASNonSharedResourcePool.java:488) at com.sun.enterprise.resource.IASNonSharedResourcePool.initPool(IASNonSharedResourcePool.java:166) at com.sun.enterprise.resource.IASNonSharedResourcePool.internalGetResource(IASNonSharedResourcePool.java:312) at com.sun.enterprise.resource.IASNonSharedResourcePool.getResource(IASNonSharedResourcePool.java:250) at com.sun.enterprise.resource.PoolManagerImpl.getResourceFromPool(PoolManagerImpl.java:211) at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:172) at com.sun.enterprise.connectors.ConnectionManagerImpl.internalGetConnection(ConnectionManagerImpl.java:245) ... 34 more
Review the values you entered and try again.
Just wanted to know, whetehr someone out there had tried deploying and running this sample application?
the changes that i made to the ejb-jar.xml file are as follows:
servername : fastmail.fm
username : "my username "
password : "my password"
folder :Inbox
protocol :imap
Please let me know the probable reasons it is not able to connect to the mail server.

Did you exhaust the pool-size for the DB; i.e., max-pool-size=32? Can you get a Connection?

Siebel Connector setup with OIM 9.1

Hi,
I am trying to setup Siebel connector using VM ware images for OIM 9.1 and Siebel 7.8. I followed the document on deploying Siebel connector.I copied connector files. Imported connector xml files, defined IT resource for Siebel.
I ran a simple create test case under running test cases. I copied required jar file, edited global.properties with required values, ran native2ascii command and I get the following error:
E:\oracle\product\OIM9100\xellerate\Siebel\troubleshoot>java -DTproperties=E:\o
racle\product\OIM9100\xellerate\Siebel\troubleshoot\troubleShoot.properties -Dlo
g4j.configuration=file:/E:/oracle/product/OIM9100/xellerate/Siebel/troubleshoot/
log.properties TroubleShootingUtility C
INFO,17 Mar 2008 14:32:17,703,[XL_INTG.TROUBLESHOOTINGUTILITY],sPropertyFileNam
e :E:\oracle\product\OIM9100\xellerate\Siebel\troubleshoot\troubleShoot.properti
es
INFO,17 Mar 2008 14:32:17,843,[XL_INTG.SIEBEL],SIEBEL Create Connection Request
INFO,17 Mar 2008 14:32:17,875,[XL_INTG.SIEBEL],createSiebelConnection(): START
Siebel Connection creation.
<com.siebel.om.sisnapi.i>
<Error><ErrorCode>8235</ErrorCode> <ErrMsg>Hello Request 1 was abandoned after 4
7 ms. Connection: 0 (SBL-JCA-315) </ErrMsg></Error>
</com.siebel.om.sisnapi.i>
at com.siebel.om.conmgr.e.a(Unknown Source)
at com.siebel.om.conmgr.e.b(Unknown Source)
at com.siebel.om.conmgr.e.<init>(Unknown Source)
at com.siebel.om.conmgr.d.d(Unknown Source)
at com.siebel.om.om.b.a(Unknown Source)
at com.siebel.data.SiebelDataBean.login(SiebelDataBean.java)
at com.thortech.xl.integration.siebel.utils.SiebelConnection.createSiebe
lConnection(Unknown Source)
at com.thortech.xl.integration.siebel.utils.XLSiebelUtilities.createSieb
elConnection(Unknown Source)
at com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvision
Manager.createSiebelConnection(Unknown Source)
at TroubleShootingUtility.main(TroubleShootingUtility.java:110)
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.siebel.om.conmgr.e.a(Unknown Source)
at com.siebel.om.conmgr.e.run(Unknown Source)
at java.lang.Thread.run(Thread.java:534)
[CMGR FATAL] Error: java.net.SocketException: Connection reset connection:0
<com.siebel.om.sisnapi.i>
<Error><ErrorCode>8235</ErrorCode> <ErrMsg>Hello Request 1 was abandoned after 0
ms. Connection: 0 (SBL-JCA-315) </ErrMsg></Error>
</com.siebel.om.sisnapi.i>
at com.siebel.om.conmgr.e.a(Unknown Source)
at com.siebel.om.conmgr.e.b(Unknown Source)
at com.siebel.om.conmgr.e.<init>(Unknown Source)
at com.siebel.om.conmgr.d.d(Unknown Source)
at com.siebel.om.om.b.a(Unknown Source)
at com.siebel.data.SiebelDataBean.login(SiebelDataBean.java)
at com.thortech.xl.integration.siebel.utils.SiebelConnection.createSiebe
lConnection(Unknown Source)
at com.thortech.xl.integration.siebel.utils.XLSiebelUtilities.createSieb
elConnection(Unknown Source)
at com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvision
Manager.createSiebelConnection(Unknown Source)
at TroubleShootingUtility.main(TroubleShootingUtility.java:110)
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.siebel.om.conmgr.e.a(Unknown Source)
at com.siebel.om.conmgr.e.run(Unknown Source)
at java.lang.Thread.run(Thread.java:534)
[CMGR FATAL] Error: java.net.SocketException: Connection reset connection:0
<com.siebel.om.sisnapi.i>
<Error><ErrorCode>8235</ErrorCode> <ErrMsg>Hello Request 1 was abandoned after 3
1 ms. Connection: 0 (SBL-JCA-315) </ErrMsg></Error>
</com.siebel.om.sisnapi.i>
at com.siebel.om.conmgr.e.a(Unknown Source)
at com.siebel.om.conmgr.e.b(Unknown Source)
at com.siebel.om.conmgr.e.<init>(Unknown Source)
at com.siebel.om.conmgr.d.d(Unknown Source)
at com.siebel.om.om.b.a(Unknown Source)
at com.siebel.data.SiebelDataBean.login(SiebelDataBean.java)
at com.thortech.xl.integration.siebel.utils.SiebelConnection.createSiebe
lConnection(Unknown Source)
at com.thortech.xl.integration.siebel.utils.XLSiebelUtilities.createSieb
elConnection(Unknown Source)
at com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvision
Manager.createSiebelConnection(Unknown Source)
at TroubleShootingUtility.main(TroubleShootingUtility.java:110)
ERROR,17 Mar 2008 14:32:20,125,[XL_INTG.SIEBEL],createSiebelConnection(): Siebel
Connection Exception:Could not open a session in 4 attempts. {1} (SBL-JCA-200)
ERROR,17 Mar 2008 14:32:20,125,[XL_INTG.SIEBEL],SIEBEL Create Connection Request
BaseException:com.thortech.xl.integration.siebel.exception.BaseException: BaseE
xception: Siebel Connection JDB Exception: Could not open a session in 4 attempt
s. {1} (SBL-JCA-200)
com.thortech.xl.integration.siebel.exception.BaseException: BaseException: Siebe
l Connection JDB Exception: Could not open a session in 4 attempts. {1} (SBL-JCA
-200)
at com.thortech.xl.integration.siebel.proxy.SiebelProxyEmployeeProvision
Manager.createSiebelConnection(Unknown Source)
at TroubleShootingUtility.main(TroubleShootingUtility.java:110)
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.siebel.om.conmgr.e.a(Unknown Source)
at com.siebel.om.conmgr.e.run(Unknown Source)
Any ideas as to why there is a connection error or what to look for to get more information.
Message was edited by:
user615489

Most of the test clients use a configuration file where you need to configure things like Siebel Admin login, server name, etc. In some cases the configuration file contains the name of the OIM it resource where this is configured instead of the actual values.
Have you customized the E:\oracle\product\OIM9100\xellerate\Siebel\troubleshoot\troubleShoot.properties file with values that are relevant for your installation?
Best regards
/M
<disclaimer> I have never used the Siebel connector</disclaimer>

Query with the Connector Pack Database Applications Table 9.1.0

Hi,
I have configured with a connector Database Applications Table (OIM-BDSQL2005) specifically to a table, how can enable the user to log into this can be the BD SQL2005
Thank you

I had a liitle progress here. For the missing mandatory fields, once you are done the mapping during the creation of GTC, go to Design Console to add mandatory fields, such as user type which is not available in the creation process of GTC. Please see:
=> http://st-curriculum.oracle.com/obe/fmw/oim/10.1.4/oim/obe12_using_gtc_for_reconciliation/using_the_gtc.htm#t5
Now actually I have exactly the same proplem as this one:
=> Re: Creating GTC in OIM 11g (11.1.1.3.0)
=> Event Recieved
=> Data Validation Succeded
=> No User Match Found
=> Creation Faild
=> Notes: ORA Error Code =>ORA-01400: cannot insert NULL into () ORA Error Stack =>ORA-06512: at DEV_OIM.OIM_SP_RECONBLKUSERCRUD", line 722
I am looking into this, will keep you posted.
Ningfeng

HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
It seems to me that the connection port is faulty.
George

Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

IPod with dock connector is not getting charged with car charger and iTrip

My iPod from 2003 with dock connector is not getting charged in my car by using the griffin iTrip with USB car charger. iTrip works, but not the charger. Maybe there´s not enough power output from the car charger? Only 5.0V with 400mA are coming out. iPod needs more? 12V with 1.0A?
Does somebody have information about that problem for me?

Has Apple dropped support for older model iPods?
Nope. Support is still there, even back to the original 1G iPod with the wheel that actually turns. I have a 3G iPod, and it syncs just fine. There have not been any software updates for years, but the old software still works fine with the latest iTunes.
You have to use FireWire, which you seem to be doing.
Try putting it into Disk Mode first, then connect it.
http://support.apple.com/kb/HT1363
Does the iPod currently play music as it should?
Do you have another docking cable (FireWire) that you can try? FireWire connectors often get worn and they no longer work, although the power connection can continue to work.
Did you try the other FireWire port in the iMac?

Memory Leak in BI SDK with XMLA Connector ?

Hi,
I am using BI SDK 3.5 with XMLA Connector. I noticed that in com.sap.ip.bi.sdk.dac.connector.xmla.impl.Connection class, the LocalTransaction object is rollbacked when the close() method is called.
This makes a call to the endTransaction() method of Repository class with "true" parameter and leads to informations storage into a RepositoryDBMemory instance.
The only way I found to avoid this is to call the endTransaction() method with "false" as parameter, which is what is done in commit() method of the LocalTransaction class.
So, I tried to commit the transaction before closing the connection but in XMLA mode, the getLocalTransaction() method throws an BIResourceException so it is impossible to commit it. This is the first issue.
Second issue: it seems that data hold by the DataSetContentHandler is not freed. I tried using SAP Parser, Xerces, Java Parser but it has no effect. I hava a MDX query that returns 13000 lines, the XML file size is about 15Mo.
In a for loop with 10 operations, it leads to a OutOfMemory error quickly (only 7 iterations OK with -Xmx256m -Xms256m options). On each iteration, the memory grows about 25 to 30Mo !
For the first point, I do not call the close method on the connection object and it is garbage collected (but, in my opinion, it is quite strange not calling the close() method on a connection object).
For the second one (DataSetContentHandler), I have no idea. Has someone already encounter this problem ? The Netbeans profiler tells me it is this object that holds all java.lang.String objects. Is it right ?
I saw in DataSetContentHandler class that it has two static fields: one for the row cursor of the dataset, the other one for column cursor. Why ? Is it OK in a multi-threaded context ?
<b>This is urgent as we will not put the project in production mode with such a memory leak ! We must find the problem very quickly.</b>
Thanks in advance for any help you might give to me !
Regards,
David Degardin (Ubik-Ingenierie)

I found the same thing. Tracing the execution back I found the only place this function was called was as part of the setup, so you shouldn't have to worry about it getting called multiple times and leaking memory. The trouble seems to be when the AudioPlayer dealloc method is called, the memory is not cleaned up.
My fix was to modify the dealloc in AudioQueueObject to check to see if audioLevels is nil and, if not, free it. This seems to have fixed the problem.

Tomcat vs Apache with Tomcat connectors (mod/jk)

Is there any advantage (security, performance etc.) of running a Java web application on Apache HTTP Server with Tomcat Connectors (mod/jk) rather than directly running it on Tomcat.

This question is already answered, see here:
http://tomcat.apache.org/faq/connectors.html
Also for Tomcat/ Apache related questions, post them to the relevant mailing lists.

Can't connect to external Oracle DB with JDBC connector

Hello guys,
I had failed to connect to connect external Oracle via JDBC connector .
Could you please help me to resolve the problem ?
Backgroud:
We need to connect the external Oracle DB with JDBC connector, because BI need to connect to the target Oracle. If the JDBC connector suceed, BI will create a UD which use the datasource
we create in Visual admin to connect to the external Oracle DB.
Environment:
Our EP version is NW04S SP17 , OS is AIX .
The target Oracle DB version is 10g(10.1.0.2.0, 64bi).
Configuration procedure :
1. Import Oracle driver "ojdbc14.jar" and create new driver which named "Oracle " under
JDBC Connector ->Run time ->Driver in Visual Admin.
2. Create datasource "Mydatasource" under JDBC Connector ->Run time ->Data Source,
Name : Mydatasource
Driver Name : Oracle
JDBC version: 2.0(with XA support)
JDBC compliant:
Object Factory :oracle.jdbc.pool.OracleDataSourceFactory
DataSource Type: ConnectionPoolDataSource
*CPDS class name :oracle.jdbc.pool.OracleConnectionPoolDataSource
Additional:
Additional Properties:
DatabaseName:LPAR8TEST
DriverName:oracle.jdbc.OracleDriver
Password: *****
PortNumber:1521
ServerName: 10.1.16.208
URL :jdbc:oracel:[email protected]:1521:LPAR8TEST
User:IMPL
Connectoin Pool:
Initial Connectons: 1                                         Expiration: (check)
Maximum Connections: 25                                  Connection Lifetime :600
Maximum time wait of connection : 60                  Cleanup Thread : 200
Default Connectoin Isolaton :Default
SQL Engine:
Open SQL
3.Create Connector :
   Copy the standard connector :SDK_JDBC to SDK_JDBC_Oracle,
Resource Adopter:
Loader References:
Add "libray:Oracle" .
Managed Connection Factory:
Configuration Property:
DriverName:oracle.jdbc.OracleDriver
Password: ****
User:IMPL
URL: jdbc:oracle:[email protected]:1521:LPAR8TEST
All fo my configuration had been listed.
And I had created JCO RFC : JT-BIDEV_PORTAL_BD1 , and created RFC connection with SM59 in BI.
Please give me some suggesiton.
Thanks.
Louis

When I try to start datasoure "Mydatasource" , it display error, error detail:
java.rmi.RemoteException: com.sap.engine.services.dbpool.exceptions.BaseRemoteException: Error during start of application "sap.com/Mydatasource". [id = StartupError]
     at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:608)
Caused by: java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "CGNPC".
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Clusterwide exception: server ID 3128050:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot start DataSource "Mydatasource".
     at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1549)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at com.sap.engine.services.dbpool.spi.CPManagedConnectionFactoryImpl.createManagedConnection(CPManagedConnectionFactoryImpl.java:198)
Caused by: java.sql.SQLException: Invalid Oracle URL specified: OracleDataSource.makeURL
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
          u2026.
When I try to test JDBC with URL : http://jt-pldev:50000/TestJDBC_Web/TestJDBCPage.jsp,
First I choose connection name "SDK_JDBC_Oracle" .
If I click "Check Connectons", it display :
500   Internal Server Error
SAP J2EE Engine/7.00
Application error occurred during request processing.
Details:
java.lang.NoClassDefFoundError: com.sap.ip.bi.sdk.dac.connector.odbo.impl.Connection (initialization failure)
Exception id: [001A64A86F2C006B000004C40010302A000469C74E86A096]
If I click "Slecton Connection", it display:
500   Internal Server Error
SAP J2EE Engine/7.00
Application error occurred during request processing.
Details:
com.sap.engine.frame.core.load.SAPNoClassDefFoundError: javax.resource.Referenceable
Exception id: [001A64A86F2C0063000004C00010302A000469C74FA2BB59]

SCOM Alert connector fighting with AD connector?

Similar Messages

Maybe you are looking for