Screen blockage in Browser

Hello to all,
I have a Droid X that has been working properly until today.  I open the browser on the phone and a page comes up with the address.  Then just before the page totally opens a blank white screen covers the original page.  At first a small ad would come up on the white screen but now nothing shows on the blank white screen.  Is there a reason or a way to remove the screen?  Any help will be gratefully appreiciated.

Greg60 wrote:
Hello to all,
I have a Droid X that has been working properly until today.  I open the browser on the phone and a page comes up with the address.  Then just before the page totally opens a blank white screen covers the original page.  At first a small ad would come up on the white screen but now nothing shows on the blank white screen.  Is there a reason or a way to remove the screen?  Any help will be gratefully appreiciated.
Good morning!
Thank you to the community for all the suggestions! I would recommend clearing out the cache and performing a force stop under Settings>Applications>All>Browser. Also, pop out the battery with the phone powered on for about 10 seconds, then re-boot. These steps will fix the browser issue.  
Please post here if you continue to have browser concerns!
Thank you!

Similar Messages

  • Ship-to Address" screen in SRM browser need to change to display only

    Hi Freinds,
    Ship-To Address" screen in SRM browser needs to change to "Display" only. The users shouldn´t have the possibility to change the delivery address in the screen to their own private address.
    Is it possbile to do any changes in SRM itself or else its purely JAVA HTML work.
    Kindly i need you guys help to resolve the above development.
    Regards
    Vivek

    Hello Vivek,
    Solution given by Suneel should be OK.
    Nevertheless, if Ship-To must be only in display mode for all users (independently of their role) and only for particular document types, you can manage it with partner schema:
    SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Define Partner Schema
    Then maintain this partner schema ID to your concerned document type:
    SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Define Transaction Types
    Regards.
    Laurent.

  • The very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices

    the very top of my 13" macbook pro screen, above the browser or application frame, goes black sometimes and I'm unable to see the choices, any ideas?

    Back up all data.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    defaults delete -g NSFullScreenDarkMenu
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V.
    Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Log out and log back in.

  • Firefox shows a black screen suddenly while browsing or when left idle for long time (more than 1 hr).

    Firefox suddenly turns totally black while I was browsing yesterday. I tried restarted it, and it works fine. In such state none of the menu or actions items are accessible. Even while closing the browser I get the confirmation popup which is also completely black.
    Screenshot link: http://prntscr.com/55kggq
    I had to randomly click on the "close tabs" button.
    I am using Mozilla Firefox v33.1 in Windows 7, 32 Bit OS with i3 processor, 4GB RAM.

    ''nescafe2002 [[#answer-663423|said]]''
    <blockquote>
    I've just had the same issue (sudden black screen while browsing), probably related to my graphics card driver which I've updated two days ago.
    Laptop model: ASUS N550JV CN270H
    Graphics card model: Intel(R) HD Graphics 4600
    Old driver: 10.18.10.3308 (2013-09-16)
    New driver: 10.18.10.3960 (2014-09-29)
    If the problems recurs, I will re-install the 10.18.10.3308 driver and post the results here.
    </blockquote>
    After 3 more blackouts, I restored 10.18.10.3308 and the problem went away.

  • Splash screen works from browser, not when double-clicked on desktop

    Hi,
    I am having trouble making a splash screen appear and have a specific question about it.
    The code is from the tutorial at:
    http://blogs.sun.com/thejavatutorials/entry/changing_the_java_web_start
    I have changed the codebase attribute of the jnlp element so it refers to my own server:
    <?xml version="1.0" encoding="utf-8"?>
    <!-- JNLP File for ButtonDemo -->
    <jnlp spec="1.0+" codebase="https://justanexample.com/buttondemo" href="ButtonDemo.jnlp">
      <information>
        <title>ButtonDemo</title>
        <vendor>The Java(tm) Tutorial: Sun Microsystems, Inc.</vendor>
        <homepage href="http://java.sun.com/docs/books/tutorial/uiswing/examples/components/index.html#ButtonDemo"/>
        <icon href="mysplash.jpg" kind="splash"/>
        <description>ButtonDemo</description>
        <description kind="short">Demonstrates use of buttons within containers</description>
        <offline-allowed/>
      </information>
      <resources>
        <j2se version="1.6+"/>
        <jar href="ButtonDemo.jar"/>
      </resources>
      <application-desc main-class="components.ButtonDemo"/>
    </jnlp> This JNLP, the mysplash.jpg, and the ButtonDemo.jar are deployed to the web server, under a "buttondemo" subdirectory of the web server's DocumentRoot.
    If I access the JNLP from a browser (https://justanexample.com/buttondemo/ButtonDemo.jnlp), things work as expected:
    The first time "Java Loading" appears.
    The mysplash.jpg is cached and can be seen in the Resource list with "javaws -viewer."
    During the second and subsequent launches, the custom splash screen appears as expected.
    However, if I have the JNLP file on my desktop, and I open it from there with a double-click, I never see the splash screen.
    My question: Why is this? Shouldn't I see the splash screen after the first launch, even if I launched by double-clicking the JNLP file on my desktop?
    Why I care:
    While I've shown the problem using ButtonDemo, I am having the same issue with my own application. I'd like to have an icon on the desktop the user can click. I do have it working, but using a workaround I consider fragile and perhaps inappropriate.
    I am using the 1.6.0_18-b07 version of the JRE on Vista SP2.
    Thanks in advance for any explanation/help.
    Edited by: mmissire on Feb 10, 2010 7:52 PM

    I couldn't get this to work. For the benefit of anyone needing something similar, here's what I did to work around it.
    At install time, my app already unpacked some config files into a known place under the user's home directory. So I now unpack a splash screen there, as well.
    The desktop shortcut tells javaws to skip it's splash screen with -Xnosplash, and then tells the JVM to use a local one (with the -J"splash:" argument). Something like this worked well enough:
    C:\Windows\System32\javaws.exe -J"-splash:C:\Users\whoever\appname\splash.jpg" -Xnosplash "C:\Users\whoever\appname\app.jnlp"

  • Capturing only software screens without the browser information

    Hello, I'm looking for a way to capture only the application part of the screen for a software demo. I've defined the size of the capture area but every time i record, captivate places the capture area at the top of the browser screen. i don't want the url, toolbars and favorites, etc in the demo., only the application area. Pulling down the capture area manually each time is not precise enough and causes small jumps or shifts in the screen captures. Any help would be much appreciated.

    Hi There,
    Please try use Application>Application region from the recording window. Try to use Internet Explorer as your Browser.
    Regards,
    Mayank

  • Blank Screen when web browsing

    To start with, I'm running an ASUS laptop, Intel Core i7, 64 bit OS; connected to an ASUS RT-N56U router.
    The other day I tried to check the data on an old external hardrive (which I've determined is dead), and in the process of looking things up on the internet I received a virus which AVG took care of.  Afterwards my browsers stopped working, and ever
    since then all that happens is I get the starting page and when I try to go to any website all that happens is the address bar goes blank, and the page either goes white or just sits on the load screen.  I've tried IE and Chrome, but they both say they
    cannot connect to the internet.  My laptop says that it is connected to the network and connected to the internet, so I am assuming something is wrong with my system somewhere, please help!! :(
    I've determined that the router and internet are both working fine since I am running a second laptop on the same setup as the broken one.  Plus there are other systems that are connected to the network that are running just fine. 
    After searching for hours, I have done the following:
    >Reset the router/modem/laptop, a few times. 
    >Disabled internet connection on laptop, turn it back on
    >On separate computer checked the router settings and it states that my computer IS connected to the router
    ***NOTE: I can't access my router settings from the broken laptop, if that matters***
    >I have verified that the MAC filter mode is disabled
    >In the command prompt (as administrator) i ran "netsh int ip reset resetlog.txt" and got:
    Reseting Global, OK!
    Reseting Interface, OK!
    >I restarted the DHCP Client
    >I PING'd the router and www.google.com and got:
    Ping statistics for 192.168.1.1:
        Packets: Sent = 4.  Received = 4.  Lost = 0 (0% loss).
    Approximate round trip times in milli-seconds:
        Minimum = 0ms. Maximum = 3ms.  Average = 0ms
    Ping statisticsfor 74.125.193.104:
        (very similar to those from above)
    Approximate round trip times in milli-seconds:
        Minimum = 88ms.  Maximum = 99ms.  Average = 94 ms
    >I tried the ipconfig /reset/flushdns /renew combo and got the following:
    C:\Users\brett>ipconfig /release
    Windows IP Configuration
    No operation can be performed on Local Area Connection while it has its media di
    sconnected.
    An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy
    stem cannot find the file specified.
     Wireless LAN adapter Wireless Network Connection:
       Connection-specific DNS Suffix 
       Link-local IPv6 Address . . . . . : fe80::55fc:a9ad:b9fe:cc81%12
       Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix 
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix 
    Tunnel adapter Local Area Connection* 15:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix 
    Tunnel adapter isatap.{537C411F-EBB9-4AD1-9EA5-EF7309BC11B9}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix 
    C:\Users\brett>ipconfig /flushdns
    Windows IP Configuration
    Successfully flushed the DNS Resolver Cache.
    C:\Users\brett>ipconfig /renew
    Windows IP Configuration
    No operation can be performed on Local Area Connection while it has its media di
    sconnected.
    An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy
    stem cannot find the file specified.
    Wireless LAN adapter Wireless Network Connection:
       Connection-specific DNS Suffix 
       Link-local IPv6 Address . . . . . : fe80::55fc:a9ad:b9fe:cc81%12
       IPv4 Address. . . . . . . . . . . : 192.168.1.74
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.1.1
    Ethernet adapter Local Area Connection:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix 
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix 
    Tunnel adapter Local Area Connection* 15:
       Connection-specific DNS Suffix 
       IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6abd:406:11c9:b946:4932
       Link-local IPv6 Address . . . . . : fe80::406:11c9:b946:4932%21
       Default Gateway . . . . . . . . . : ::
    Tunnel adapter isatap.{537C411F-EBB9-4AD1-9EA5-EF7309BC11B9}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix 
    >Even tried doing a system restore, but it failed due to my anti-virus not allowing it?
    I'm still searching, but I am not getting too far.  Please help!!

    There were problems with hacked routers. Reset router settings to ISP default and set much stronger password. Test router with another computer or mobile.
    Recover your infected systems.
    Rgds
    Milos

  • Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes

    2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
    I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
    I went into the full screen view, edited a photo and got out of the full screen view to export it.
    All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
    (note: at the bottom it says 380 items displayed)
    Going back to full screen view, everything looks and works as nothing has happened:
    In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
    Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
    To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
    At some point I saw this weirdo but have not been able to replicate it:
    Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
    Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
    Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
    edit: added the note under the first image

    When the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
    Regards
    Léonie

  • A thin black line in my mac book screen while i browse

    This is happened three to four times. I see a thin black horizontal line form 1.5 inch form top edge of my screen. What I need to do to fix this issue ?

    I bought it from amazon.in, shall i return it and ask for replacement ?

  • Screen goes to sleep when watching full screen video in browser

    Hey,
    On my MacBook Pro, with Mavericks, I often watch MLB.tv, WWE Network or even Youtube videos on full screen. Since upgrading to Mavericks, my screen goes to sleep after the normal amount of time based on my power settings in the system preferences. In previous versions of OS X, if i had a video on full screen, whether it was with Quicktime, VLC, Safari, Chrome, etc. the screen would never go to sleep.
    Is there a way to prevent this from happening other than just changing how long it takes for the screen to time out?
    Thanks.

    I think you may want to point this out to Apple… it sounds like an oversight.
    http://www.apple.com/feedback/
    Can you set a 'hot corner' to disable the screensaver activation? It's less than ideal but it could save your sanity - just slide the cursor into the corner.
    Hot corners should be available in the Desktop & Screensaver section of system preferences. I'm on another OS at present and may be mis-remebering an eariler OS feature.

  • Can I snap a full screen slideshow to browser?

    I was successful in using 'Fullscreen" shideshow but the slideshow will not scroll with the browser.  The other slideshows don't want to 'snap' to browser edge.   I want a browser width slideshow that will scroll with the page.  How do I do this?  Thanks for your help!
    Andy

    Hi Andy,
    Please refer to the following link https://forums.adobe.com/message/6059665#6059665
    Regards,
    Aish

  • Red Screen in Object Browser (HTMLDB 2.0) with IE

    I have tried all of the suggestions listed in the forum and post installation instructions - added the files on the server, cleared every cache option for IE and the red screen is still showing. Does anyone have anything else I should try? I am at the end of my rope!

    The following steps have been taken thus far:
    - updated the htmldb 2.0 installation with the .htc & .xbl files in the dad configuration
    - bounced the apps server & apache
    - cleared cache on IE; cookies, temp files, etc.(both within the app & explorer)
    Troubleshooting has found that this problem only exists on IE under my profile. If I login as another user on my laptop, I do not encounter the problem. I have had several co-workers test for me and for those that have not used htmldb in dev mode, have no issues. Seems IE is keeping something in cache in my user profile. Any suggestions on how to completely clear this is appreciated. Thanks for the responses.

  • Unable to access the login screen using web browser

    Hi!
    I have recently downloaded the peoplesoft HCM template from edelivery.oracle.com and created two virtual machines namely HCM-DB and PIA-APP. Now both the virtual machines are able to ping to each other but are unable to ping to the Oracle virtual server nor to the base machine on which the Oracle virtual manager is installed. Both the viirtual machine, the oracle vm server and oracle vm manager are in the same network 192.168.1.0.
    Secondly if I am starting the database then the PIA server. Still I am unable to access the login screen using the following url:- http://nsoln.com:8000/ps/signon.html.
    As, I am new to this field, any help would be a great asset for me to resolve the above issue.
    Thanking you..
    Yours Sincerely
    Santosh

    Check the server name in your httpd.conf file
    (ORACLEHOME\Apache\Apache\conf\httpd.conf) and look to see if it is in capital letters. If it is edit it to lower case. Reboot.

  • Why is this much difference between z2 and z1 of screen time,web browsing, video playback?

    i have sony z1 phone...it's very nice but battery is not good. i have 5-5:30 of screen time from 100% down to 3-4%
    I heard many people saying that z2 have at least 8 hours and i get this to look :http://www.gsmarena.com/battery-test.php3
    I am very disapointed.is there a solution to get more screen time or i will sell this z1? sorry for my bad English

    It all depends on what else are you doing with the device during that time.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Continuous Spinning wheel on home screen with no browsing

    I have a continous spinning wheel on my NEW iphone 5c. I will see the wheel from my home screen without any apps open or running and I can also see the spinning wheel when i'm using any app.  is this a known bug. i did update to 7.1.1 just yesterday, but i had this issue before the update. I tried the restart and once again it came back. any help is appreciated.

    Same exact "problem" for me too - except im on an iPhone 5 (iOS 7.1, ver 7.1.1).
    Amy one have a permanent solution for this? It seems to seriously be draining the battery much more than normal.
    Have only noticed this in the last 2 weeks or so. TIA.

Maybe you are looking for