Screen dimming without selecting it to do so!!

Hi, I am a Macbook newbie and am sorting through some teething issues. The latest is that I have selected in my power setting 'custom' this selection has delays of 35 mins for screensaver and 40 mins for screen off. Now my question is this,I have NOT checked the 'dim screen before screen off' selection, but after 5-8 mins the screen dims down. moving the mouse puts it on full again..
I know it should do that on battery but this is on AC and on my own custom setting...
Any insight?
Also one more question, why does firefox display selection boxes in a crappy square manner whereas Safari (which I cant use as it is incompatible with a lot of websites) has nice little rounded glowing blue boxes?
weird
Steve

Well that just makes my macbook crazy then!! I really do not understand the dimming when NOTHING is selected for it to do so.. anyone else have dimming?
Oh and regards to safari, it does not work with yahoo mail, my university peoplesoft network thing, and nearly all of the major companies I have been applying to in the last few weeks (final year at uni!) one even required WINDOWS XP I had to go and use the cluster down the road to do their online test...
Firefox covers most of the problems apart from the last one.
Although it seems to load images quite slowly on our 10mbps lan...

Similar Messages

  • A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem.

    A magazine's app on my iPad has stopped working.  When I open the Newsstand folder and click on the app, the screen dims briefly, then returns to the Newsstand folder. The other app in my Newsstand folder (Wall Street Journal) opens without any problem, and this magazine's app opens just fine on my wife's iPad.
    I have deleted the app and reinstalled it from the Apple store and that makes no difference.  I have also done a hard reboot on my iPad with no result.
    Any thoughts about what might be wrong? 

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • How to create a variant for a program without selection screen

    Hi All,
    I've created one program which takes the data from 30 tables and loads into one final table.
    This program is already moved to Production.
    But while creating variant it's not allowing, since the program doesn't have the selection screen.
    Is there anyway where I can create a variant in production without selection screen directly as the program code is already moved to production.
    Thank You,
    Regards,
    Karthik.Ch

    Hi ,
    Are you running this program in a process chain??

  • Run alv report without selection screen in background

    Hello Every body,
    i programmed a ALV Report without selection screen, and i want to create a job for this alv report.
    Any help?
    Thank u.
    Ouail.

    Hi Steve,
    Can you tell me where i have to put your code?
    this is my abap code:
    START-OF-SELECTION.
       p_filref = '\\SAPSERVER\f\SAFT\ivat\FI_Extract_1000_20140709_102346_910.XML'.
       PERFORM copy_from_xml_to_itab TABLES it_ref_file
                                     ref_xml_data
                                     USING p_filref.
    **Begin Extraction File
       SUBMIT ZZ_FI_IVAT_EXTRACTOR
       WITH p_bukrs EQ '1000'
       WITH p_gjahr EQ '1998'
       WITH filepath EQ '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
       WITH cldata eq space
       AND RETURN.
       DATA: FILE_TABLE  TYPE TABLE OF SDOKPATH,
       DIR_TABLE  TYPE TABLE OF SDOKPATH.
       CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
         EXPORTING
           DIRECTORY  = '\\SAPSERVER\f\SAFT\iVAT_Extractie\'
           FILTER     = '*.*'
         TABLES
           FILE_TABLE = FILE_TABLE
           DIR_TABLE  = DIR_TABLE
         EXCEPTIONS
           CNTL_ERROR = 1
           OTHERS     = 2.
       IF SY-SUBRC <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.
       "get file name
       LOOP AT FILE_TABLE INTO p_filref.
       ENDLOOP.
       CONCATENATE '\\SAPSERVER\f\SAFT\iVAT_Extractie\' p_filref INTO path.
       PERFORM copy_from_xml_to_itab TABLES t_ext_file
                                     ext_xml_data
                                     USING path.
       PERFORM fill_xml_tab_in .
       perform build_fieldcatalog.
       PERFORM compare_data_ref_ext.
       PERFORM send_email.
       perform display_alv_report.
       PERFORM delete_extraction_file.
    in the perform copy_from_xml_to_itab TABLES it_ref_file......, i use this code:
       CREATE OBJECT gcl_xml.
    *Upload XML File
       CALL METHOD gcl_xml->import_from_file
         EXPORTING
           filename = p_filref
         RECEIVING
           retcode  = gv_subrc.
       IF gv_subrc = 0.
         CALL METHOD gcl_xml->render_2_xstring
           IMPORTING
             retcode = gv_subrc
             stream  = gv_xml_string
             size    = gv_size.
         IF gv_subrc = 0.
           REFRESH gt_xml_data[].
    * Convert XML to internal table
           CALL FUNCTION 'SMUM_XML_PARSE'
             EXPORTING
               xml_input = gv_xml_string
             TABLES
               xml_table = gt_xml_data
               return    = gt_return.
         ENDIF.
       ENDIF.

  • Without selection screen how can we featch the file.

    Hi all,
         without selection screen(parameter,select-options iam not using these both.) how can we featch the flat file what ever it may be (file format is xls.textor any thing) how ot do...plz it's urgent for me.
    Regards,
    Krishna,

    Hi varun,
      this is my sample code.here we are geting selection screen.without selection screen hoe to get file from out internal table.
    plz gothrough this code and replay to me varun.
    tables:pa0002.
    type-pools:truxs.
    *data:W_TRUXS_T_TEXT_DATA TYPE TRUXS_T_TEXT_DATA ,
         it_p0001 type standard table of pa0001.
    TYPES: BEGIN OF it_p0002,
            pernr like pa0002-pernr,
            nachn like pa0002-nachn,
            vorna like pa0002-vorna,
           end of it_p0002.
    DATA: t_p0002 type standard table of it_p0002,
          wa_p0002 type It_p0002.
    DATA: it_raw TYPE truxs_t_text_data.
    SELECTION-SCREEN BEGIN OF BLOCK S_BLK WITH FRAME TITLE TEXT-000.
    parameters: P_EXCEL   TYPE RLGRAP-FILENAME.
    SELECTION-SCREEN end OF BLOCK S_BLK.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_EXCEL.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
       PROGRAM_NAME        = SYST-CPROG
       DYNPRO_NUMBER       = SYST-DYNNR
       FIELD_NAME          = 'P_EXCEL'
    IMPORTING
       FILE_NAME           = P_EXCEL .
    START-OF-SELECTION.
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
      EXPORTING
      I_FIELD_SEPERATOR          =
       I_LINE_HEADER              = 'X'
        I_TAB_RAW_DATA             = it_raw
        I_FILENAME                 = p_excel
      TABLES
        I_TAB_CONVERTED_DATA       = t_p0002[]
    EXCEPTIONS
       CONVERSION_FAILED          = 1
       OTHERS                     = 2.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    end-of-selection.
        loop at t_p0002 into wa_p0002.
           write:/ wa_p0002-pernr,
                   wa_p0002-nachn,
                   wa_p0002-vorna.
        endloop.

  • Screen fields without parameter id's in IW26 pseudo-selection screen

    The initial screen of IW26 looks like a selection screen but isn't.  It uses a number of screens as follows:
    1) For notification/status/order: IQS0 1050 (IQSO is the function group)
    2) For Notification Reference Object: IWO1 0100
    3) For Notification Responsibilities: IQSO 7326
    4) For Notification Start/End Dates: IQS0 7330
    5) For Notification Item: IQS0 7324
    6) For Notification Malfunction Data: IQS0 7328
    If you look at IQS0 7330, you'll see that the only the "Priority" screen field has a parameter id.
    If you look at IQS0:7324, you'll see that none of the Item-Related screen-fields have parameter ID's.
    Same for IQS0:7328 - none of the Malfunction-related fields have parameter id's.
    So - if we do a call transaction/skip first screen, we can't preset any of the Item-related screen fields in 7324, nor any of the Malfunction-related screen fields in 7330, nor any of the Date-related fields in 7328 except Priority.
    If we were dealing with a "regular" selection-screen here, I know how to get around this problem - do a "submit program" with the selection-screen parameters and select-options "preset" in the with-clause of the submit.
    But here we don't have a regular selection-screen.  We have the screens 7330, 7324, and 7328 in IQS0.  So I can't do a "submit program".
    So how do I preset screen-fields on these screens when SAP has provided no parameter ids for them?
    (I assume here that I can's use "submit program" because I'm not trying to present real selection screen fields.)
    Sorry if this is a dumb question, but I've only dealt with this problem before when the transaction has a real selection screen and I can use "submit program" with a with clause in which the parameters and select-options are preset.
    Thanks for any help anyone can provide.
    I

    Hi Rich -
    I've done the ten because you confirmed my suspicion that nothing "clean" can be done here.  I thought maybe some kind of customer screen exit would allow parameter id's to be assigned on the fly rather than in Dictionary, or something like that, but if you've never heard of this then I'm sure it can't be done.
    Anyway, the issue regarding the BDC is not the usual one of maintainability over time - it's a political one.
    The functional analysts want to use a 3rd party product to create a simpler front-end screen for IW26 - the guys on the shop floor don't want to chase the trees.
    We told them that this third party product has recently been known to cause headaches (in fact, by pure coincidence there was a post tonight 12/26 about this product.)
    They said - well what else are you going to do, write a BDC?
    I hadn't looked at IW26 so I assumed it had a regular selection screen and said to them that a BDC wouldn't be necessary - a call transaction or submit program would suffice.
    But of course I spoke too soon, unless I can get an OSSN with the parameter IDs.
    Anyway - that's the history here.
    BTW, I am going to blog on this topic of "missing" parameter ID's for two reasons:
    a) it ticks me off;
    b) if IW26 is to be efficiently called as a service, these missing ID's have got to be there;
    c) there's no reason to go to a 3rd party product just to avoid using a BDC when parameter IDs are missing.
    I know, I know - I'll blog about anything ...
    Regards
    djh

  • Variants without Selection Screen

    Hi,
    if i have a normal Dynpro Screen, and no selection screen, how can i then use the Variants of SAP? I found some FM like RS_CREATE_VARIANT but this does not work. The coding of these Variant helpers always try to read out the fields from the report. But my report has no fields, because it is a dynpro screen and no selection screen.
    Do you know if i can use variants for dynpros?
    Thanks

    Hi Johnny,
    You can create Transaction Variants using SHD0 transaction.
    Have a look at the below SAP link:-
    [Transaction Variants and Screen Variants  |http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/7bc3895d1111d295ad0000e82de14a/frameset.htm]
    Also Have a look at the below wiki :-
    [Creating variants for custom screens|Creating variants for custom screens;
    <removed by moderator>
    Regards
    Abhii
    Edited by: Thomas Zloch on Sep 1, 2010 5:56 PM - please leave this to the original poster

  • Blue screen on start up.  The wheel spin and the blue screen gets brighter for a second, then the blue screen dims and it repeats with the wheel.

    When I start up my imac, I get a blue screen.  The wheel spin and the screen gets brighter for a second, then the blue screen dims and it repeats with the wheel.

    Are you referring to the startup screen which is normally gray with the dark gray Apple logo or are you referring the login screen which is typically blue? If it's the latter you might give this a try:
    Clearing Caches to Fix Login Problem
    You will need to type some Unix commands. If you are not comfortable with this, I don't know of anything other than a re-install. But if you are careful, you should be OK. I recommend you print this out in a largish mono-spaced font so you don't miss any spaces (or add extra ones). Note that case is important.
    Be careful. Some of these commands are dangerous, since you are going to be root.
    Start up in Single-user Mode. When this has finished you will see a prompt ending in '#', although there may be other messages. Enter the following commands after the prompt:
    /sbin/fsck -fy
    Press RETURN. Wait a few seconds for 8-10 lines of output. If the last line says repairs were carried out, repeat this command until you get a message 'The volume <yourdiskname> appears to be OK'. Then continue with:
    /sbin/mount -uw /
    cd /Library/Preferences
    rm com.apple.loginwindow.plist
    rm com.apple.windowserver.plist
    cd /Library/Caches
    rm -r *
    cd /System/Library
    cd /System/Library/Caches
    rm -r *
    reboot
    Press RETURN after each command.
    This should now take you to a proper login screen after the normal boot sequence. You should then Repair Permissions by using Disk Utility (in your /Applications/Utilities folder).
    If it's the former then reinstall OS X. For Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Error while generating form 16 in portal - Screen output without connection

    Dear Gurus,
    We are facing error while generating form 16 through portal and getting the below error in portal.
    Screen output without connection to user.    error key: RFC_ERROR_SYSTEM_FAILURE
    When we checked for dumps in R/3 the following dump is coming:
    DYNPRO_SEND_IN_BACKGROUND with error message :
    Message class : FPRUNX
    Message number: 102: No job started.
    Then we tried to execute the form 16 through R/3 itself using tcode PC00_M40_F16 after putting in the relevant values in the selection screen and then press on PRINT FORM button, but surprisingly the system logs out without giving any error or dump.
    We tried doing it repeatedly and once in these attempts we got an error saying Initialization of font server module failed.
    We are not getting clue as to why this is happening. <<Text removed>>
    Regards
    Edited by: Matt on Jul 27, 2011 9:50 AM

    Dear,
    This might be the problem of Adobe Acrobat Reader. what is the version of Adobe you are using ?? If it 9.0, then uninstall it and reinstall 8.0 and then check .
    Could you please check your installed SAPGUI component? If component 'Engineering Client Viewer' is installed, please uninstall
    it. And try to call same transaction again.
    BR, Deepak

  • Is there a way to download music from the cloud at one time without selecting each one individualy

    just looking to see if all your songs in the cloud can be downloaded into your device without selecting each one individually

    Hi smokea,
    If you go to More>Purchased>Music>Not on this Phone>All Songs, you will see a Download All button in the top right-hand side of the screen.
    (sorry about the info that was here previously)....
    Cheers,
    GB

  • Screen output without connection to user and other portal trouble

    I created filter. Saved it. If I tried edit it - it was allow. But after some time and after I used it in a query I trying edit the filter and can't do it! My rsplan portal page write to me:
    Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE.
    ST22:
    Dynamic error:   DYNPRO_SEND_IN_BACKGROUND
    Short text:
         Screen output without connection to user.
    What happend?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTRD" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    user, transaction...
        Client.............. 100
        User................ "PI_JCO_RFC"
        Language Key........ "E"
        Transaction......... " "
        Program............. "SAPLSTRD"
        Screen.............. "SAPLSTRD 0302"
        Screen Line......... 0
        Information on caller of Remote Function Call (RFC):
        System.............. "########"
        Database Release.... 645
        Kernel Release...... 645
        Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
        Call Type........... "synchron and non-transactional (emode 0, imode 0)"
        Inbound TID.........." "
        Inbound Queue Name..." "
        Outbound TID........." "
        Outbound Queue Name.." "
    What happend? What I need to do? I try delete filter from query but it isn't make it editable.
    Another bug: I can delete this filter and can copy them into new filter. But when I delete it and try copy another filter to deleted technical name then system said that "element with same name already exist". How to delete the filter correctly?
    One more bug:
    I work with russian language. And on personalisation page of portal options I selected "Russian (Russia)" (There are variant simply "Russian" in list of langs but I tried it too with the same result) BUT I have only interface with russian lang and TEXTS of objects got for eng lang anymore (and in damp we can see that lang key = "E"). Where it must be corrected?
    And for last in this message: I can create an object or edit it but can see that object was last edited by PI_JCO_RFC. Is it right? So, how I will can see who change the object at last time?
    Help me please!

    >
    Deepti Maru wrote:
    > What object text you are talking about for which language is english but you want russian?
    I try describe it again.
    If I logon via SAPlogon with russian language in RSA1 I can see descriptions of objects for russian lang (and new objects which I will create will be with russian description if I enter it). In portal (rsplan) in personality I set russian language ang get the russian interface BUT it get descriptions for ENG and in this way I can't see any descriptions - only technical name because all objects was created with russian lang. So, what I need to do for get russian descriptions of objects in portal?
    And another trouble - when I create object (for example - aggregation level) in portal then I can't see descriptions of it in RSA1.
    And from this I have another question too. How I can (if it possible) use english interface and russian descriptions of objects in both portal and SAPLogon?

  • My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

    My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
    Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    Remove any 3rd party ram.
    Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
    If you still want to restore your computer to factory level...
    Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
    To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide  PDF

  • Screen dims and multi-language "restart" message appears

    Currently, every time Safari is used, the entire screen dims and a multi-language (German, Chinese, etc.) message comes on the screen saying that I must physically power down my machine and restart. No error message is given, nor are any other options allowed, as the keyboard and mouse are rendered useless.
    I have rebooted the machine several times, including powering down the cable modem, but the problem persists.
    This problem has occurred in the past, but seemed to clear itself, only to reoccur starting yesterday (23 Sep 05). I can't shake the feeling that this problem is more in the OS X arena than in Safari's, but testing does not seem to bear out my feelings - all other installed applications appear to run properly and this phenomenon of screen dimming with forced power down and restart does not occur with other applications.
    Any thoughts? Thanks! Bob Meyer.

    I suggest the following:
    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    If you continue to have the problem, then reinstall the OS X Mavericks 10.9.2 Update (Combo) updater.

  • External screen dims when opening different apps?

    Hi All ----
    Seems my external screen dims and rectifies when opening different apps - like some kind of brightness adjustment going on... it doesnt happen on the MBP, just on the external screen --- i've checked all possible settings on Ext. Displ. / re-booted / repaired perms... cant quite figure it out.
    I dont think this is energy-saver related.
    Many thnx for any help in adv. ---
    cheers,
    J.

    The problem with that is, it's hard to put it back together without assuring that you're not pinching the cable again.
    Instructions can be found here.
    As he says, the cable can be found at Small Dog Electronics:
    http://www.smalldog.com/product/43417
    If you need replacement feet, they can be found at MicroDoc.
    The specific link you need on PowerBook Tech's website can be found here.
    If it looks like too much for you to handle, you may want to check out DT & T Computer Services. Perhaps in a metropolitan area like Austin you can check the Yellow Pages and find a technician willing to match the price.
    At one point, DominionTech in Colchester, Vermont was offering the repair for $79.90, but I'm not sure if that price is still available.
    Good luck.

  • Screen dimming issue (?)

    Hi, sometimes, (usually when web surfing) my screen dims on its own, at first I thought there was a problem with the screen, but then I realized that the brightness meter does go down, and raises again if I press the brightness button, BUT when its going down, the brightness does NOT display on screen, it just goes down... Also, it is like crazy drastic, it just dims enough to **** me off, like a few notches, very annoying, its been driving me crazzy since I bought it just never thought to ask anyone for help... Any ideas how to fix this?

    Go to System Preferences Hardware Displays and uncheck the box for "Automatically adjust brightness as ambient light changes".
    Then go to the Energy Saver and uncheck "Slightly dim the display when using this power source" for the Power Adapter and the Battery selections.

Maybe you are looking for

  • 1Tb External Hard Drive won't mount

    I've owned a 1Tb Seagate external hard drive for about one year, and I've installed the software that comes with it for what I thought would be "peace of mind" (now I know to reformat, but my problem is that there is content I would like to save firs

  • Infinity connection died... what should I do?

    I'm posting from the 3g on my phone. Is there anywhere I can check the service status for Northolt exchange? My modem and router are both on, but the link light next to the power light on the modem switched off around 35 minutes ago, and now I don't

  • Jpegs not appearing in lightroom folder

    I have LR5 and something weird just happened. I had my jpegs showing up fine but now they are not - only in one particular folder set. When I go to filter, I don't even see jpegs as a file option. I know that the files are there on my computer, but i

  • Highlight the current row in the called form

    hi, how can i highlight the current selected row in the called form.. do i have to use current_record or current rowid as parameter and pass to a called form ?? thanks

  • TREX -  Sneak Preview Portal Integration

    I installed Sneak Preview EP6SP4 Portal and CM. I The System Configutaion for KM do not show the TREX. How do I integrate TREX into EP6 Portal? Thanks for your help. PK