Screen goes black and I get steady beeps

I have a 2004 HP Pavilion a600n, AMD processor with Window XP SP3 and 1 gb of ram. I have no viruses or spyware due to running McAfee, Malwarebytes, Spybot, Spyware Blaster, and Advanced System care.
My pc starts fine, but after about an hour, the screen goes black, and I get a series of steady beeps about a second long. There are no short, long beeps. Just steady short beeps and a black screen.
I am forced to shut down via the power button. When I try to restart, the beeping occurs again, and the monitor light remains orange.
I will let my pc sit for a day or two, and I can start it back up, the monitor light is green then, but after an hour, the whole process starts over.
I have no way of knowing if it's ram, video, or fans. My video is built into the motherboard.
I will run PC Doctor and clean the dust out of the fans, etc.
But I do not have a lot of money to just randomly go about replacing parts. Does anyone have any idea what is the  most likely culprit?
Thank you in advance for any help.
Kaat1220

This shows how to get inside: http://h10032.www1.hp.com/ctg/Manual/c00225826.pdf
If you have never done something like this before, maybe enlist a friend to help.  I suggest you not remove the CPU heat sink if that chore is not a task done before, at least without a knowledgeable friend along.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

  • Everytime I turn on Airplay on my iPad the screen goes black and iPad gets really laggy?

    It was working fine for about 20 minutes but now when I turn it on I just get a black screen and my iPad lags ridiculous amounts. I've reset Apple TV and the iPad but it's still happening. Any one else experienced this? Or have any solutions?
    Thanks in advance.

    Diane69-
    I've seen a few similar complaints here.  I suggest you try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    If this doesn't help, your iPad may be defective.  If it is still in warranty (1 year), show it to an Apple Store Genius and you may get a new iPad on the spot.
    If it is out of warranty or there is no Apple Store near you, look for an Apple Authorized Repair Center.  There may be one in your city.  In the US, <United States>.  Outside the US, <International>
    Fred

  • IMac G5 screen goes black and fan gets loud...?

    This has never happened before...
    Randomly tonight while on my iMac the screen shut off. The computer was still running, but my screen was completely black like it was off, and the fan got really loud. I turned it off then back on each time it happened (3 times), and it would turn back on like nothings wrong but then after probably 30min. of using it... it would happen again.
    Any idea what it could be? This had never happened before, and I couldn't find a whole lot on google.

    "my problem might have to do with overheat and/or I might need to "vacuum" part of my mac. No idea how to do this and I'd like instructions on how."
    Since the iSight cannot be taken apart unless you take it to an AASP, the only thing you can do is use a vacuum hose specifically one w/a brush on the end so as not to scuff up the plastic. Just run the hose over all the computer vents.
    Make sure your computer is OFF when doing the above.
    Also, when troubleshooting, disconnect all devices from your computer except for the keyboard & mouse.
    Move the computer to a less dusty place and/or move it where the computer can get plenty of ventilation.
    You mentioned that you read rockstar's post. Therefore, please advise all the troubleshooting suggestions that you have already tried. This will eliminate all the +"been there, done that"+ scenarios. Thank you.

  • I can not get my iPad to mirror with Apple TV. When I toggle to mirror the tv screen goes black and the iPad freezes. The iPad iso is up to date

    I can not get my iPad to mirror on Apple TV. When I toggle the tv screen goes black and the iPad freezes. Have updated the iOS to latest settings and also updated the settings on the Apple TV

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen.

    While browsing the internet with my iPhone 4S the screen goes black and it looks like it's turning off, but it pops up to the unlock keypad screen. It has plenty battery and I was wondering if it is an issue of using too much of the iPhones RAM or not. I have no other apps open besides Messages. I am getting kind of worried as it started around two weeks ago and it has gotten increasingly frequent.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these steps in order until the issue is resolved.

  • Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

    Imac 27" Intel Core7  CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

    I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
    So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

  • Portege M400 freezes, screen goes black and fan speed increase when moved

    Can someone please help me?
    I recently received the Portege M400 from a friend 4 days ago and reformatted to Windows XP Tablet edition.
    All was going well until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically!,
    So far I have had no success in fixing this problem and I much appreciated is some one could help me!

    Hi there,
    I have the same laptop. Bought it from a friend also! That was a year ago. It was working perfectly till 6 months ago when I had it going 100% like yours. Screen freezes, fan speeds up and hangs up once it is moved. Recently, even if it doesnt move it hangs up also. I have tried many things like reinstalling drivers and Windows.....etc.
    I dont think it is Windows problem or drivers problem, because if you run BIOS and try to move the laptop, it also hangs up!!
    Tried updating the BIOS, also no benefit. I ended up opening the laptop and having a look to the motherboard (thinking that I could see something that I could fix!! But again, did not get any results.
    I tried also disconnecting peripherals one by one to see whether I could spot the problem, I disconnected the battery, the hard disk, the optical drive, the wirelss modem (from inside), memory, and even the bluetooth, but could not spot the culprit.
    I believe now that the problem is basically the motherboard (sort of wear and tear insulation problem) and it is beyond my humble expertise.
    I am sure if I would contact TOSHIBA, they would not be of much benefit as I am a second hand user. And if I try to buy from them a main board, they will charge me hell of money.
    I hope that this is helpful for you to avoid you wasting your time like me.
    Please if you would come into any progress, let me know. Likewise, I would be happy to update you.

  • I have a first gen iPad, 64g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading a blog, or trying to watch a YouTube video. I try to o

    I have a  iPad, 32g, and for no apparent reason, the screen goes black and whatever app I am using is closed on me. It seems to be happening more and more frequently, especially when loading apps, or trying to watch a YouTube video. I try to open safari or youtube again and it will often crash several times before it may or may not decide to load for me. It is extremely annoying and getting to the point where I can not use it

    Standard troubleshooting steps in order are as follows:
    Power the iPad off and on.
    An iPad reset, which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release.
    Restore your iPad with iTunes from your iPad's backup.
    Restore your iPad with iTunes as a new iPad or not from your iPad's backup.
    If no change after the last step, your iPad has a hardware problem.

  • Zen screen goes black and locks up when attempting to dock to compu

    When attempting to dock my Zen to my computer, it first starts like it is attempting to dock and then the screen goes black and the player locks up. I have to reset it in order to get it to come back on. This happens when trying to dock with Zen Media Explorer and Media Monkey. I have tried it on another computer and it happens there too. Help!

    You are talking about a Creative Zen MP3 2/4/8/6/32 GB (flash) player?
    Then check if you have the latest firmware on your Zen?
    If you do have the latest firmware e.g. < Latest revision [.2.0] 28Feb08> then
    try this:
    Recovery Mode - If you experience one or more of the following symptoms, it is recommended that you boot the player into its unique Recovery Mode, and then clean up, format or reload the firmware.
    . The player is not detected in Creative MediaSource or Windows Media Player
    2. The battery does not last as expected
    3. Your computer stops responding during file transfers
    4. There is a power outage during file transfers
    5. There is an error about firmware
    6. LCD displays a "Firmware Problem" message
    7. Your player is not responding.
    8. The player is performing erratically <---------- - ?
    Just clean-up and reboot.

  • TS3533 if my imac is left unused for a few mins the screen goes black and is unresponsive

    if my imac is left unused for a few mins, the screen goes black and is unresponsive

    In addition check your Energy Saver Preferences and make sure that your Display Sleep and Computer Sleep timers are properly set to get the expected results.
    For example: I want my Display to sleep after 5 min and my Computer to Never Sleep so that I can choose when to sleep it from the Apple dropdown menu.

  • My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

    My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

    I just did a reset all settings on both.
    Will see where this gets me.
    Thank you for your helpfull input.

  • Screen Goes Black and Hangs when browsing by Artist, Album, Song, etc.

    I'm having a fairly huge issue with Front Row:
    I can play video files (although their is a moment of hangtime between selecting a video and the video actually playing) and music files (if I choose the "Shuffle Songs" option), however, when I choose to browse my music by artists, albums, songs, genres, etc. my screen goes black and stays that way until I hit CMD+Q over and over until it finally quits. Furthermore, when I do play music via "Shuffle Songs" and quit out of Front Row, the music continues to play in the background and cannot be stopped, paused, etc.
    Is there anyone out there who can help me fix this? I love Front Row and use it all the time and it would be a shame not to be able to anymore..
    Thanks in advance,
    Corey

    I have a similar problem. When browsing music the screen goes to black or just freezes on whatever was beeing displayed for maybe 30 seconds to a minute before continuing. It happens quite often. I am running the latest version of Front Row on a brand new Mac Mini. I have a very large iTunes music folder (about 830 gigabytes of uncompressed AIFF files) running on an external FW800 drive. I tried repairing permissions and a number of Front Row and a few iTunes files appear in the list. However, when I run repair permissions again, the same files are still listed so obviously if they need to be repaired, it's not happening. I tried repairing the volume (no problems found) and repairing permissions from the Install disc but the result was identical.

  • When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

    When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

    Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • I keep getting message "mozila Firefox not responding." It takes minutes to down load a site - some times it just gets in a loop and never down loads. Then when I try to click on it again screen goes opaque and i get the same message.

    I 'm getting message "Mozila Firefox not responding." It takes minutes to down load a site - some times just gets in a loop and never down loads. The little circle at top just keeps going round in circles .
    Then when I try to click on the screen again the screen goes opaque and I get the same message re " Mozilla Firefox not responding" - and it is minutes before I can get back in to close down screen.
    I have downloaded Fire fox version 4 and this is still happening.

    See:
    * http://kb.mozillazine.org/Error_loading_websites

  • Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

    I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
    When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
    I hope this helps you my friend!

Maybe you are looking for

  • Users Cannot Connect to Report Manager

    Hello all, I've done some searching and tried a few things, but nothing has worked. I recently started working with SSRS and created two reports.  I deployed them to the server, but when I type in http://servername/reports in a browser, I get the hom

  • Nhl gamecenter? any buffering?

    hi,i was thinking of buying a apple tv. any issue with the nhl gamecenter buffering?

  • Change in desltop print quality?

    When I had a system with XP,in order to make high quality prints (with photo paper) I needed to set the printer controls to HQ, paper type to "photo" and so on...... I acquired a better system running on W7 64Bit and now if I make the same print all

  • Align the Depth of Objects

    I'm creating a presentation on some artwork and I would like to figure out if there is a way to align objects. I have two objects, side by side, and I'm hoping to move the inside edges of these two pictures so that they partially face one another. Th

  • Resetting ipod shuffle playlist in the field

    Here is my deal. On my shuffle I put four or five podcasts first in my playlist, then a few hundred songs. While I am out working, or recreating, sometimes I want to listen to podcasts, and sometimes I want music. When in sequential play, I can liste