Screen layout for asset class
HI,
My problem is that I am assigning one asset class to new screen layout in the asset class master data.
But the system is taking the fields from the layout which is chart of depreciation dependent data (tcode ANK1)
Here when i try to change that data for this asset class the system throws the message "Chart-of-depreciation-dependent assignment to asset class XXXX not possible"
Procedure
In order to be able to assign chart-of-depreciation-dependent data to
asset class 4100, the following conditions have to be met. You have to
have already
1. Defined at least two active charts of depreciation
2. Assigned asset class 4100 to more than one chart of depreciation
However, at the moment this asset class is only assigned to chart of
depreciation 1.
Any help would really be appreciated.
Regards
Meenakshi
This is whta you have done:
Generally, the control specifications (the screen layout and the account determination) for the asset class applies throughout the client, that is, for all charts of depreciation. It is therefore sufficient to make control specifications once per asset class.
You only need to carry out this step, if, contrary to the usual case, you want these control specifications to be country-specific (that is, different depending on the chart of depreciation). The system then uses the entries you make here depending on the chart of depreciation in the given company code. The system then ignores the control specifications in the asset class that are independent of the chart of depreciation.
We shall try to check how to delete this settings.
Similar Messages
-
What is maintanence level in screen layout for asset master record
hi everyboby,
can anyone explian this
when I'm defining screen layout for asset master record to make business area as required entry it was throwing msg like select maintanance level. what could be the reason?can anyone help me on this.
thanks
sirihi..
thanks for reply again.
If i select business area as optional (main no,sub no)and supress for all fileds (only selected main no) ,I'm able to save screen layout.If i set BA as required select mainno,sub no check box and save it shows the same error msg.Anyway i can create asset master now.thanks
regards
siri -
Screen Layout for Asset Master Data
Hi all,
we are using SAP ECC 6.0 with a base component 700 Level 15 and the Logistics and Accounting component 600 Level 12.
I hope you can help me with the following tasks. It should be said that I am not an expert FI-AA, so you must bear with me.
It is desired, that the Screen Layout for asset master data, should have an additional field "customer order" as a required field.
So I go to the Customizing
--> Financial Accounting --> Asset Accounting > Master Data> Screen Layout--> Define Screen Layout for Asset Master Data --> Define Screen Layout for Asset Master Data
--> and then into the third level of navigation in the u201Cfield group rulesu201D (rule for R & D development costs and then logical field group time-dependent data)
So there I should be deposited the "customer order" as a required field.
But:
1. The "customer order" is not available in any field group. How is it possible that I add the u201Ccustomer orderu201D to a field group?
2. I am not able to add any field, in the above transaction?
I am very grateful for any help.
greetingsDear all,
I want to come back to my problem listed above.
In the APC Values Posting (Transaction ASKP) the costs have been assigned to a WBS element. Now, it should not be assigned to a WBS element, but to a customer order.
For that I created in the asset master a new customer's own field "Customer Order".
For this I have implemented the customer enhancement AIST0002 (Customer fields in asset master).
The new field "Customer Order" is now available in the asset master as desired.
So far so good.
Now, the new field "Customer Order" must be specified and activate as an Account Assignment Object.
Is this possible and how can I add my new field to an Account Assignment Object?
Thanks in advance for any help.
greetings
Martin Buthmann -
Screen layout for the asset class
Hi,
I know the name of the screen layout used for a particular asset class, now in that screen layout I want to see which fields are mandatory and which are not. Where can I see that?
Please help .
Many ThanksHi,
If you want to see the fields in screen layout go to spro - Asset accounting - Master data - screen layout - Define Screen Layout for Asset Master Data - click on Define Screen Layout for Asset Master Data
there you will find the fields which are mandatory / optional
Kedar -
Change/ Add screen in Group Box specify tab layout for Asset master Record
Hi All,
I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box.
Thanks & Regards,
PankajHi,
Try at below path:
Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
here you can change the layout for the same.
Kind Regards,
Mehul -
Not able to created Number Ranges for Asset Classes in AS08
Dear Friends,
I am not able create Number Ranges for Asset Classes in AS08.
It is giving me an error message as company code does not exist.
When I Check Consistency under path SPRO -> Financial Accounting -> Asset Accounting -> Preparing for Production Startup -> Check Consistency -> Overview Report: Company Codes. I am getting the following
RSOL Reliance Sealink One PLtd
CoCode no. alloc. NKTR
Fiscal Year Variant V3 Apr.- March, 4 special periods
Start 2nd half month 00
Transfer date 31.03.2006
Chart of dep. TOLL Chart of Depreciation - For Highway Projects
Net worth tax 01 Book depreciation as per Compinies Act 1956
Enter net book value
Status company code 2
Current fiscal year 2007
Doc. type dep. pstng AF Dep. postings
> Number range &1 in co.code &2 for doc.type &3 must be defined as internal
Calc.insur.value
Input tax exempt
If you see the above first two line you will find the difference is that Company code RSOL in the first line and NKTR company code in the second line.
Actually CoCode no. alloc. has been wrongly copied as NKTR while copying CoCode it should be RSOL and not NKTR.
I think because of this wrong allocation it is giving me an error in AS08. Also it is not showing me CoCode in drop down list in AS08.
Please help me to resolve the problem.
Thanks
Rahul JainLook in TC OAOB if the company code is assigned to a chart of depreciation
-
Hi,
How to create the screen layout for the financial statement version? What is the T-code?
Thanks
SrideviI don't think you can have a screen layout for FSV. FSV in short is the represenattion of GL accounts in a Hirarchial way.
When you have created your FSV in OB58, this FSV is available in all the standrd todes that are using FSV as a base and the screen layout that the Tcpde provides is avaialable in the same Tcode.
For Example if you are using F.01 after executing the report, you have the chnage layout option which you can use.
Hope you understood.
Reward points if useful.
sarma -
Screen Layout for Leasing Tab_leasing groups
Hello Gurus,
In the screen layout of the leasing tab, I have Leasing Data 1, 2 , leasing long text and capital lease method. How and from where can I change the fields that are included in the groups leasing data 1 & 2. Can I maintain the screen layout for leasing tab as per fields wise instead of field group wise.
Thanks in Advancehello
Thanks for the reply, from the path suggested I am not able to reach to the point where i can separate / change the fields in the groups leasing data 1 / 2. Can you please tell me exactly where to go and what to do for making the fields active / inactive instead of the making the whole group of fields active / inactive.
Thanks in Advance -
Screen Layout for Purchase Orders
Hello,
Using the screen layout settings in config, I want to set a particular field to display only in change mode in ME22N.
But enjoy PO's are all controlled by entry ME21N only in config, So this means if I set AKTV (change) to display in ME21N transaction the field is display also, something I don't want to happen.
Using ME22 etc it is no issue.
Any thoughts on how to set change mode for enjoy PO's?
Thanks.screen layout for purchase orders are done for document type wise.
go to document type and check the field selecton. now you can change field selection for that document type
spro > mm > purchasing > purchase order > define screen layout for document type.
find the fileld selection key at purchase order > difine document type -
Screen layout for FBE1 truncation
Hiiiiiii
Dear expert i need to add some extra fields in FBEI anyone can help you to find screen layout for FBE1 truncation
Best regards
Ajeesh.sDEAR
Actually i want to suppress two fields in FBE1 for that i need screen layout.i don't know the relationship in between FBE1 & FORM PAINTER
please help me out this issue
Ajeesh.s -
Hi
Can you folks suggest me the path to changing the screen layout for the inbound delivery.
cheers
Josephhi Joseph,
An option for you to customize screen layout is using Screen Painter transaction SE51. -
Screen layout for Excise.
hai all MM gurus,
can anybody throw the lights on screen layout for Excise transaction codes for MM?.No answer.
-
Screen layout for Customer group
Is there any way we can define a screen layout for a particular customer group(having particular fields mandatory and remaining optional).
Any help will be appreciated.
Thanks,
ALAM.It is through the transaction code OBD2
The path is
SPRO-FINANCIAL ACCOUNTING-ACCOUNTS RECEIVABLE AND ACCOUNTS PAYABLE-CUSTOMER ACCOUNTS-MASTERDATA-PREPARATIONS FOR CREATING MASTERDATA-DEFINE ACCOUNT GROUPS WITH SCREEN LAYOUT
Hope this helps.
Pls reward if this helps. -
I don't wish to use the ones already present in the gallery. They do not meet my requirements. Therefore, I want to create/design my own screen layout for the responsive HTML5 output. Please let me know the steps to do so. How to create a SLZ file, what is the code that I need to write. What are the components that I need to create to have a complete screen layout to be used in a responsive HTML5 output.
That would require inline formatting and I doubt that is an option.
If I am following you, the header area is full width of the screen so I cannot see how it can be broader, Perhaps you mean deeper? A screenshot might help here. The change would be made in the layout.css file.
That would be a change in the layout.css.
I suspect that too is controlled by the layout.css.
To make the changes you would have to go into the layout.css and modify that. As you will see, it is a very complex CSS and that is why I said creating you own layout is not easy. Hopefully when Willam is available again, he may be able to give you some more specific information.
I think Willam will confirm that if you cannot read the existing CSS to make those changes, then creating your own skin would be beyond your capabilities. Please do not take any offence there, I am simply emphasising how complex a task it is to create a skin from scratch. It's not one I would take on.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Screen Layout for Dep Area in Assete master.
Hi,
I am trying to display the fields "Expired Useful Life & Expired life -Period" in Dep areas tab of assets master.
My screen layout is 1000 Dep on main asset level.
i have assign this to Dep area in OAYZ.
I made these 2 filed optional in screen layout,even though i am not able to see these fields in asset master.
When i tried to other fields , it got effected.
What is the reason behind this?
Please provide me the solution to display these fields in asset master.
Thanks Regards,
UdayHi,
I checked all stated things.It is right.
Still i m not able to see it in master.
When i go to envirnment in aso2, it shows the screen layout rule with these fields as optional.
So i am not able to understand ,how to bring that fields?
Please anyone provide me the solution.
Regards,
Uday
Maybe you are looking for
-
HT204380 Can I broadcast live on a web site using my iphone4 or ipad2?
Is there any way that I can Broadcast Live using my iPad2 or my iPhone 4. Are there any apps that I can purchase to do so?
-
I need to unhide the window or field that allows me to DIRECTLY enter a different URL. I do not want to use the search engine. I want to manually enter the URL of my choice and go DIRECTLY there. So, how do I unhide the URL window?
-
Where are my audio books in purchased items, where are my audio books in purchased items
I have recently updated y itunes to the new version. Now I cant find audio books in purchased items. I can find books, but there is not a section for audio books. Can someone help please. G
-
Multiplexing redo logs and control files to a separate diskgroup
General question this one... I've been using ASM for a few years now and have always installed a new system with 3 diskgroups +DATA - for datafiles, control files, redo logs +FRA - for achive logs, flash recovery. RMAN backup Those I guess are the st
-
De-Activating the 'Change Query' option from the Bex Menu
Hi, I want to deactivate the button 'Change Query' in BEx Excel. I have the restricted the user for not to change the query through PFCG. When the user selects this option, a error message 'You do not auth. for change' is displaying but he can view t