Screen Layout for Asset Master Data

Hi all,
we are using SAP ECC 6.0 with a base component 700 Level 15 and the Logistics and Accounting component 600 Level 12.
I hope you can help me with the following tasks. It should be said that I am not an expert FI-AA, so you must bear with me.
It is desired, that the Screen Layout for asset master data, should have an additional field "customer order" as a required field.
So I go to the Customizing
--> Financial Accounting --> Asset Accounting > Master Data> Screen Layout--> Define Screen Layout for Asset Master Data --> Define Screen Layout for Asset Master Data
--> and then into the third level of navigation in the u201Cfield group rulesu201D (rule for R & D development costs and then logical field group time-dependent data)
So there I should be deposited the "customer order" as a required field.
But:
1. The "customer order" is not available in any field group. How is it possible that I add the u201Ccustomer orderu201D to a field group?
2.  I am not able to add any field, in the above transaction?
I am very grateful for any help.
greetings

Dear all,
I want to come back to my problem listed above.
In the APC Values Posting  (Transaction ASKP) the costs have been assigned to a WBS element. Now, it should not be assigned to a WBS element, but to a customer order.
For that I created in the asset master a new customer's own field "Customer Order".
For this I have implemented the customer enhancement AIST0002 (Customer fields in asset master).
The new field "Customer Order" is now available in the asset master as desired.
So far so good.
Now, the new field "Customer Order" must be specified and activate as an Account Assignment Object.
Is this possible and how can I add my new field to an Account Assignment Object?
Thanks in advance for any help.
greetings
Martin Buthmann

Similar Messages

  • What is maintanence level in  screen layout for asset master record

    hi everyboby,
    can anyone explian this
    when I'm defining screen layout for asset master record to  make business area as required entry it was throwing msg like select maintanance level. what could be the reason?can anyone help me on this.
    thanks
    siri

    hi..
    thanks for reply again.
    If i select  business area as optional (main no,sub no)and supress for all fileds (only selected main no) ,I'm able to save screen layout.If i set BA as required select mainno,sub no check box and save it shows the same  error msg.Anyway  i can create asset master now.thanks
    regards
    siri

  • Change/ Add screen in Group Box specify tab layout for Asset master Record

    Hi All,
    I need to add or change group box in specify tab layout for Asset Master Record. Please advice where i can change or create new Group Box.
    Thanks & Regards,
    Pankaj

    Hi,
    Try at below path:
    Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
    here you can change the layout for the same.
    Kind Regards,
    Mehul

  • Screen layout for asset class

    HI,
    My problem is that I am assigning one asset class to new screen layout in the asset class master data.
    But the system is taking the fields from the layout which is chart of depreciation dependent data (tcode ANK1)
    Here when i try to change that data for this asset class the system throws the message "Chart-of-depreciation-dependent assignment to asset class XXXX not possible"
    Procedure                                                                     
         In order to be able to assign chart-of-depreciation-dependent data to     
         asset class 4100, the following conditions have to be met. You have to    
         have already                                                              
         1.  Defined at least two active charts of depreciation                    
         2.  Assigned asset class 4100 to more than one chart of depreciation      
         However, at the moment this asset class is only assigned to chart of      
         depreciation 1.                                                                               
    Any help would really be appreciated.
    Regards
    Meenakshi

    This is whta you have done:
    Generally, the control specifications (the screen layout and the account determination) for the asset class applies throughout the client, that is, for all charts of depreciation. It is therefore sufficient to make control specifications once per asset class.
    You only need to carry out this step, if, contrary to the usual case, you want these control specifications to be country-specific (that is, different depending on the chart of depreciation). The system then uses the entries you make here depending on the chart of depreciation in the given company code. The system then ignores the control specifications in the asset class that are independent of the chart of depreciation.
    We shall try to check how to delete this settings.

  • Tab layout for asset master

    hi kings
    I am unable to find the tabs in assets accounting.  Because at the time of asset master creation i am getting only 4 tabs. So i want to add some more tabs in the asset master. So how it is possiable to maintained the laout tab in the asset master.
    regards
    ram

    hi EC
    I am explain the problem :
    At the time of  asset master creation i can found it only 4 tabs i.e general,time-dependent,Allication,Depreciation areas.
    But i want some more tabs like Origin,Insurance,Networth tax. in Asset master records.
    As per my knowledge i am maintained the one layout and in that layout cantains the all the tabs in asset accounting. That layout has been assign to respective asset class.
    Eventhough i am not gettting the all the tabs in asset master. So i do for the my issue.
    regards
    ram

  • Integrating MDG in Financial Self Service for Asset Master Data creation in CRM portal

    Hello Experts,
    I have a requirement in CRM box.
    If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
    Then a portal page will open in browser. There we have link Master Data Services.
    In that link we have standard sublinks for some financial master data creation.
    This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
    We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
    And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
    But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
    How to approach for this. Please suggest.
    Regards,
    Somnath Mitra

    Hello Experts,
    I have a requirement in CRM box.
    If we navigate to SAP menu we have Self Service -> Financial Internal Self Services.
    Then a portal page will open in browser. There we have link Master Data Services.
    In that link we have standard sublinks for some financial master data creation.
    This is coming from LPD_CUST(Launchpad Customizing) -> FINISS. In this Master Data Services we have to create new link for "Create Asset".
    We can't go for Transactional iView. We have to choose Application Type as Web Dynpro ABAP only as present in standard links.
    And in the Application USMD_ENTITY_VALUE2 should be present as generic UI component.
    But after that what needs to be done for asset I am not getting. We have to do some config for component for web dynpro component, entity types, UIBB etc. InSPRO also, Cross-Application components ->Process and tools for Enterprise Applications -> MDG -> General Settings also we have to do something. I have collected info in isolated way.
    How to approach for this. Please suggest.
    Regards,
    Somnath Mitra

  • Add field group to Asset Master Data Screen Layout

    Hi Gurus !!
    Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
    Thanks a lot,
    Sasha

    I don't think you can add a funds center to the Time dependent tab.
    Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center.

  • Screen layout for the asset class

    Hi,
    I know the name of the screen layout used for a particular asset class, now in that screen layout I want to see which fields are mandatory and which are not. Where can I see that?
    Please help .
    Many Thanks

    Hi,
    If you want to see the fields in screen layout go to spro - Asset accounting - Master data - screen layout - Define Screen Layout for Asset Master Data - click on Define Screen Layout for Asset Master Data
    there you will find the fields which are mandatory / optional
    Kedar

  • Group Asset for Asset Master

    Hiii gurus
    We are uploading data from April ' 07 till now..while uploading data i have entered the closing balances of assets and for group assets..
    Now in the month of April & May ' 07 , in Asset master template i forgot to enter Group Asset no. in Asset master data ( AS01 ). And the assets also capitalised in  the relevant months.Now i have to give ( Assign ) Group Asset no. in Main Asset  , but the field Group Asset in Main Asset is Suppressed.
    Plsss tell me how to make link between Group Asset and Main Asset after the acquisition ???
    Thanks & Regards
    Ramki

    Hi,
    Try at below path:
    Financial Accounting (New)>>Asset Accounting>>Master Data>>Screen Layout>>Define Screen Layout for Asset Master Data.
    here you can change the layout for the same.
    Kind Regards,
    Mehul

  • Asset master data issue

    HI  All
    While i am creating the asset through AS01 with out giving the useful life in depriciation tab
    its not allowing me to save
    can anybody tell me where do i need to make this field as optional
    PS: i have already checked the screen layout of this asset master and i havent found anything relating to depreciation tab

    HI All
    While simulating the issue in quality(where same settings have been maintained( wrt OAYZ, AO21), In asset master, neither the EXp. UL field is diplayed, nor promts for value when trying to change. Only in Production the error is there.
    Any specific reasons? We thouroughy compared screen layout for asset master and depricaition both and there is not defference.
    Regards
    Prasad

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • Asset master data synchronization with HR Master data

    Dear Experts:
                          I am FI consultant and i am doing Research on Synchronization of asset master data with HR master data. Our management wants that if company gives any thing which is regarded as an asset e.g Laptop, expensive tools e.t.c to its employee then beside opening its asset master data in FI it should also be updated in HR Employee master data. For this from FI side there are 3 asset classes for which we want that if any asset is opened in these classes then the data should be updated in HR. I have turned on Personnel number in screen layouts and have fetched this field in asset reports. We want
    1...Asset Description
    2...Cost Center
    to be updated in HR master data. Now my question is that how this can be achieved. Is it possible? What configuration will need to be done for it.
    Regards

    Hi
    FOr assets created in FI and reflect them in HR use the feature ANLAC and it will take care.
    This feature determines whether or not the system checks the fields Asset number in infotype 0040 (Internal Control) and Loan object number  in infotype 0040 (Objects on Loan) against database ANLA.
    R K

  • Useful life is asking mandatory field in asset master data

    while asset master creation useful life is asking mandatory field in dep.key : ZSLU. actually i have to give "ZERO" in useful life field. i have set screen layout in AO21 also.again asking mandatory field. I got the one point, I think this is the problem,
    Note: Base method 0011 (Ordinary: percentage from useful life) already assigned in dep. Key ZSLU. If we assigned in dep. key ZSLU, we should give positive values for useful life in asset master data.
    I changed base method 0002 instead of 0011, it was accepted, If i change base method(0011),
    i want base method instead of 0011?
    which base method i have to give? please give suggestion?
    Thanks
    indu

    Hi ,
    i have changed optional field also. it's asking mandatory, i have tested base method 0002 instead of 0011. if i give 0002 or other base method, it is accepting.
    Note: if we mention base method 0011, we must give passitive values in useful life.
    what i have to do? please tell me?

  • Field in asset Master data "Planned retirement on / control

    Hi all,
    I would like to know how to deactivate the control for the field "Planned retirement on"?
    The control is the following "Simulate only to planned retirement" indicator in the selection screen of the given standard report.
    Where can I found this indicator?
    Thanks for your help!
    Cheers,
    Karim

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

Maybe you are looking for