Screen locking when pressing "M" Key

Ok, I don't know if this is a problem I've created or theirs something wrong with my phone but everytime i press the "M" key my screen goes black and locks the keyboard, even while texting!!! Pressing "L" brings up the Voice Dial... this is driving me nuts! Running OS 5.0.0.591. Please help!

OS release 5.0.0.591 is not an officially released operating system. I assume you downloaded a leaked beta release?
Perhaps where you downloaded the file might provide you some assistance?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Winxp is gone when pressing option key at startup, "no bootable device"

Hi everyone,
I'm new to mac and recently bought a MBP.
I did bootcamp and installed windows xp and SP3 at the same time in a small partition, I remember it was 8gb.
I had no problem booting in to xp or mac after the installation, I can even press option and see both OS.
But now I cannot boot to windows, at startup while pressing the option key, I only see mac os and not windows. I also tried rebooting from the startup disk utility, but it has a black screen saying "no bootable disk found." It wants me to insert a bootable disk, so I inserted the window xp disk and has to force restart the laptop. Then it started a process like trying to load the files to reinstall win xp, of course I didn't let it.
Now when I went back to disk utilities I see that the winxp partition is 9.2gb, it was 8gb when I made it.
Recently I split my mac partition into 2, I tried to do the time machine back up, but then it takes too long so I canceled it and deleted the partition. I wonder if this affects my window xp partition.
Now I cannot see winxp when pressing option key at startup, but can see it in startup disk utility, and disk utility. When I boot from startup disk utility, it shows "no bootable device, insert cd, and press anykey..." I tried verifying and repairing the parition in disk utility, didn't work.
So this is all I did before I cannot boot into xp.
1. made new partition for winxp (formated partition as FAT)in bootcamp and installed winxp + sp3. everything was fine.
2. create another partition, and call it "data" <-want to create this for data only, while the other half is for software installation only.
3. create another partition for time machine, but when running time machine it says the partition is too small, so I delete it and make the partition bigger.then I run time machine, but since it takes way too long, I canceled it, and deleted the partition.
4. in winxp, had installed kapersky anti-virus 9.0
Now, I have 3 partitions: 1 for software installation, 1 for data, and 1 for winxp.
So why can't I boot to windows? Did things overwrite? Please help me, I'm so frustrated. Thank you.
Message was edited by: nobutan
Message was edited by: nobutan

Thanks fortuny,
I had read the link you suggested. And since my partition for windows is FAT32, as noted in the website, I can edit the boot.ini directly in my mac. In my mac, it already shows that the partition # is 3,
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN/fastdect
but my window os is not booting.
Like the link noted, "it crashes with the "I'm sorry, we couldn't start up Windows. Do you want to start in Safe Mode?" screen. You'll also see a flicker of the BLUE SCREEN OF DEATH, which flashes an UNMOUNTABLEBOOTVOLUME error so quickly you won't have a chance to read it. This was the hint that the BOOT.INI entries were incorrect..."
According to the boot.ini in the site, my boot.ini file was already set up correctly, so why can't windows startup?
Also something I don't understand from this:
"NOTES: If you didn't follow the instructions and chose to PARTITION the existing volume instead of RESIZING then ADDING a partition, this appears to mess up BootCamp's boot loader and you may have to start again. Step 3, however, may offer you a way out."
When I did the 3rd partition, I did it in Disk Utility in mac, not from the mac os cd, and I split the mac partition into 2, I didn't do the "resizing," then using the unused space to make new partition... I wonder if this is causing the normal booting...
So do I start again by deleting my data partition or start from reinstalling windows? If the problem can be fixed without installing windows, of course, it would be great.
Message was edited by: nobutan

I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift command V screen is still stuck

I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift+command+V screen is still stuck

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
=======================================
Reinstall - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

How to avoid shared locks when validating foreign keys?

I have a table with a FK and I want to update a row in that table without being blocked by another transaction which is updating the parent row at the same time. Here is an example:
CREATE TABLE dbo.ParentTable
PARENT_ID int NOT NULL,
VALUE varchar(128) NULL,
CONSTRAINT PK_ParentTable PRIMARY KEY (PARENT_ID)
GO
CREATE TABLE dbo.ChildTable
CHILD_ID int NOT NULL,
PARENT_ID INT NULL,
VALUE varchar(128) NULL,
CONSTRAINT PK_ChildTable PRIMARY KEY (CHILD_ID),
CONSTRAINT FK_ChildTable__ParentTable FOREIGN KEY (PARENT_ID)
REFERENCES dbo.ParentTable (PARENT_ID)
GO
INSERT INTO ParentTable(PARENT_ID, VALUE)
VALUES (1, 'Some value');
INSERT INTO ChildTable(CHILD_ID, PARENT_ID, VALUE)
VALUES (1, 1, 'Some value');
GO
Now I have 2 transactions running at the same time:
The first transaction:
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;BEGIN TRAN
UPDATE ParentTable
SET VALUE = 'Test'
WHERE PARENT_ID = 1;
The second transaction:
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;BEGIN TRAN
UPDATE ChildTable
SET VALUE = 'Test',
PARENT_ID = 1
WHERE CHILD_ID = 1;
If 'UPDATE ParentTable' statement runs a bit earlier, then 'UPDATE ChildTable' statement is blocked untill the first transaction is committed or rollbacked. It happens because SQL Server acquires shared locks when validating foreign keys, even
if the transaction is using read uncommitted, read committed snapshot (read committed using row versioning) or snapshot isolation level. I cannot see why change in the ParentTable.VALUE should prevent me from updating ChildTable. Please note that ParentTable.PARENT_ID
is not changed by the first transaction, which means that from FK's point of view whatevere is set to the ParentTable.VALUE is never a problem for referential integrity. So, such blocking behavior seems to me not logical. Furthermore, it contradicts to the
MSDN:
Transactions running at the READ UNCOMMITTED level do not issue shared locks to prevent other transactions from modifying data read by the current transaction. READ UNCOMMITTED transactions are also not blocked by exclusive locks that would prevent the
current transaction from reading rows that have been modified but not committed by other transactions.
Does anybody know how to workaround the issue? In other words, are there any tricks to avoid shared locks when validating foreign keys? (Disabling FK is not an option.) Thank you.
Alexey

If you change the primary key of the parent table to be nonclustered, there is no blocking.
Indeed, when I update ParentTable.VALUE, then:
in case of PK_ParentTable is clustered, a particular row in the clustered index is locked (request_mode:X, resource_type: KEY)
in case of PK_ParentTable is non-clustered, a particular physical row in the heap is locked (request_mode:X, resource_type: RID).
and when I update ChildTable.PARENT_ID, then:
in case of PK_ParentTable is clustered, this index is used to verify referential integrity:
in case of PK_ParentTable is non-clustered, again this index is used to verify referential integrity, but this time it is not locked:
It is important to note that in both cases SQL Server acquires shared locks when validating foreign keys. The principal difference is that in case of clustered PK_ParentTable the request is blocked, while for non-clustered index it is granted.
Thank you, Erland for the idea and explanations.
The only thing that upsets me is that this solution cannot be applied, because I don't want to convert PK_ParentTable from clustered to non-clustered just to avoid blocking issues. It is a pity that SQL Server is not smart enough to realize that:
ParentTable.PARENT_ID is not changed and, as a result, should not be locked
ChildTable.PARENT_ID is not actually changed either (old value in my example is 1 and the new value is also 1) and, as a result, there is no need at all for validating the foreign key.
In fact, the problem I described is just a tip of the iceberg. The real challenge is that I have deadlocks because of the FK validation. In reality, the first transaction has an additional statement which updates ChildTable:
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
BEGIN TRAN
UPDATE ParentTable
SET VALUE = 'Test'
WHERE PARENT_ID = 1;
UPDATE ChildTable
SET VALUE = 'Test'
WHERE PARENT_ID = 1;
The result is famous message:
Msg 1205, Level 13, State 51, Line xx
Transaction (Process ID xx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
I know that if I change the order of the two statements, it will solve the deadlock issue. But let's imagine I cannot do it. What are the other options?
Alexey

Focus lost when pressing ALT key

Hi,
is there any way to prevent the focus to be lost when pressing ALT key in an AIR app??
I tried event.preventDefault() in KEY_UP and KEY_DOWN events but it doesn't work
when the user press the ALT key, the stage loses the focus
thanks

I am now having trouble with the same issue. I have tried removing the ALT key from the Input Map from my frame and the component I'm having trouble with. I have also tried setting my own action in the action map for this. We also tried listening for the key pressed event and putting focus back to the combobox where I want focus to remain. I am now working on trying to use the processKeyEvent method to handle this, but have not had any luck as of yet with that. If anyone has some help on this, I'd greatly appreciate it!

Sleep button take screen shot when pressed

The sleep button take screen shot when pressed,doesn't act like sleep button?

It only takes screen shots if the round home button at the bottom and the power button on top of the phone are pressed together.

When pressing soft key continuously error will occured

In midp1.0 when pressing soft key continuously during the time of program execution in doesn't
affect thread value.But the same program in midp 2.0 thread value will affected and error will
occured.is there any difference between midp 1.0 and midp 2.0 when pressing key press?

Please use CLDC and MIDP forum for midp related issues.
http://forum.java.sun.com/forum.jspa?forumID=76

Suppress screen lock when charging? (N8)

Is there a way to suppress the screen lock when the N8 is connected to USB or the charger?

Actually it is possible. The app "lights on" http://store.ovi.com/content/8172 senses whether the phone is charging and keeps the screen on. I used this all the time on my old N95 and did install it when I first got the N8. I decided to uninstall it as there is some concern about AMOLED screen life if displaying a static image for long periods, so haven't tried it since the Anna and Belle updates. It is your choice whether to use it if the risk of screen damage is real and significant - I didn't feel that I knew enough to risk it. If you want a free app that will keep the screen on, but without the automation that the above app offers. I do kept my screen on for fairly short periods using Le countdown, http://store.ovi.com/content/53253 which has a setting to keep the screen active which works even when you put the app in the background. I would again suggest that you make sure that you are happy with the potential risk of screen damage before you decide whether to keep it active for extended periods.
N8-00 pc059C9F6 Belle
808 PureView pc059P6W5

Why does my screen locks when i press home button?

I recently got a ipad mini and sometimes the screen locks by itself when i'm in the middle of watching a video or when i press the home button. Anybody have any idea why is it doing this?

i have the same problem. did you ever find out what causes this?
thx

Screen dissappers after pressing Enter Key

Hello all,
I have an OO ALV Design. On the ALV toolbar I have a custom button on the ALV toolbar. when I click on that button I will get a pop screen.
This pop up screen has got 2 buttons, one is Execute and the second one is Cancel. until the user clicks on any button the popup screen should be visible. but somehow if i press enter the screen is getting disappeared.
Can any one help me.
Regards
Ravi

Hi Friend,
if u dont have anything in PAI how could you expect to get any other thing.....
see do one thing in the pf-status of ur dialog box u have to declare a pf-status not for screen but for a dialog box.
in that under the Reserved function key define a function code for cancel icon and save and activate the pf-status, u can create the buttons in dialog box in the screen painter but for a dialog box u have to at least define a pf-status with a cancel icon and its function code.
for example if u enter function code CANCEL for the cancel ICON then capture the same in pai, alog with that u have also declared 2 buttons on the dialog box for eg. with name edit and send u can then create PAI as follows -
>>>
data lv_ucomm type sy-ucomm.
       lv_ucomm = sy-ucomm.
CASE lv_ucomm.
    WHEN CANCEL'.
     set screen '0'.
     leave screen.
    when 'EDIT'.
      "BREAK-POINT.
      PERFORM EMAIL.
      CALL METHOD OF APPITEM 'Display'.
      FREE: ATTACHS, APPITEM, NAMESPACE, APPOUTLOOK."free ole objects.
     PERFORM pres_del.
      set screen '0'.
      leave screen.
    WHEN 'SEND'.
      "BREAK-POINT.
      PERFORM EMAIL.
      CALL METHOD OF APPITEM 'Send'.
      FREE: ATTACHS, APPITEM, NAMESPACE, APPOUTLOOK."free ole objects.
     PERFORM pres_del.
      set screen '0'.
      leave screen.

Nokia 5610 new phone hang when press enter key; it...

Anyone facing this problem? I just brought couple of days only, I found the phone hang when i switch ON it and press Enter key after the PIN code. It looks no response and keep displaying on that screen.
Solved!
Go to Solution.

15-Sep-2008 09:25 AM
merceleong wrote:
I sent it to reinstalled the software and it looks ok now but, anyone know for new phone, how long the battery will last? My unit found only two days without playing music all the time.
Just an advise
On it's first time fully charge and discharge - vice versa for three times. After that don’t drain your battery every day to 10-20% of its charge. You can actually expect battery problems by draining the battery frequently.
Roughly every 30 charges, deliberately discharge your battery to 10-15%, and fully charge to 100% afterwards.
This will help maintain the accuracy of the “fuel gauge” on the device (your battery meter or scale). It has nothing to do with the battery memory but helps maintain the accuracy of the device’s percentage of battery charge left.
Good luck

Screen locks when I try to call someone

Hello. Can someone please help me. When I dialed a number today as soon as I presses the call button my screen locked and when I tried to unlock it it just went on lock again the touchpad was not working nothing

Does the same thing happen if you restart the phone? If it does, I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?

N95-1 turns off when press any key

I was using normally the phone when suddenly it turned off, I thought was the battery but it's go, I tried other battery with the same result. I turn on the phone, and when I press any key it turns off. If the keyboard keeps locked the displays says yeah unlock the keys, but when i unlocked and press any button it's turns off, I made the hard reset trick, but this couldn't solve the problem, help me please

I have the exact same problem with my Nokia Luna 8600, turns on normally, but as soon as I press any key, it turns off and changing battery nor formatting didnt help.
Any ideas?

How can i select the next column instead of next row when press enter key

I need to know how can i select the next column instead of next row when i press the enter key.By default ,when i press enter key the next row is selected and the column remain unchanged but I wants opposite that is the row should remain unchanged but column index will changed.
Thanks to all.

Well, the right arrow key will already move you to the next column, so the easiest way to do this is to modify the InputMap to have the Enter key invoke the same Action as the right arrow key.
You can search the forum for my "Table Actions" (without the space) example that will show you how to do this.

IPhone 5 screen locking without pressing the lock button

Recently my iPhone screen has started locking without pressing the button. It is like it is stuck but the button isn't even pushed down. It does it so often that it is hard to use my phone because it keeps locking the screen and then trying to turn off the phone. It wasn't so bad at first and I used the accessibility feature to lock my screen in case something was wrong with button. However, my friend was looking at my phone and pressed the lock button which made it start going crazy again. I can't turn my phone off either because it will automatically turn back on because the button is going off. It is almost like there is a ghost pressing my lock button constantly. That is the best way to describe it. I'm not sure if I am under warranty or not, I got the phone from Sprint in the beginning of June.

Make an appointment at the genius bar and have it looked at. It sounds like the power button is failing.

Screen locking when pressing "M" Key

Similar Messages

Maybe you are looking for