Screen not displaying correctly. It keeps moving as the mouse moves

Screen not displaying correctly. It keeps moving as the mouse moves

Your problem is not the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
In order for us to give your problem our undivided attention to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac or iDevice you are using, what operating system, and what version of the application in question. Please remember to post in the forum relevant to your hardware or version of OS X.

Similar Messages

  • Outlook web login screen not displaying correctly on Exchange 2007 service pack install

    Hello everyone,
    I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly.  The page looks white with some black X's (I think that's where the
    pictures/background images used to be).  We tried to restart the ISS service with no luck.  I would appreciate any help you guys can provide.
    Thanks,
    Brian Kourdou

    Hi,
    I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
    Please try the following steps to solve this issue.
    Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
    Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
    Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
    Remove it with this command
    Remove-OwaVirtualDirectory “owa (Default Web Site)”
    Now create it again with the following command
    New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
    Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • Screen not displayed correctly using InteractiveViewer

    I have created a report that prompts the User for Start and End dates.  When the Prompt dialogue box is displayed using interactiveViewer the images are not displayed correctly.
    Does anybody have a fix for this problem ??
    Example attached.
    Ron Smith
    DBA

    My guess is that the toolbars don't show up when you view the reports either.
    There should be a virtual directory called 'crystalreportviewers' on your webserver. This is where you will find all the images supplied by the viewer.
    Right click on the image that is having problems and select properties.  This should give you location of the viewer.
    You should be able to trouble shoot this way be comparing the actual path with the real path of the missing images.
    Hopefully this will help.
    <a href="/blog/10">Rob&#39;s blog - http://diamond.businessobjects.com/robhorne</a>

  • Website not displaying correctly. Firefox is changing the character set to Western (ISO-8859-1) automatically.

    Normally I have set Firefox (or it's set by default) to Character Set Unicode (UTF-8) and everything displays perfectly. I've never had a problem before.
    Now however, whenever I upload my own website, for some bizarre reason on that particular tab (and only that tab) the Character Set is changed over to Western (ISO-8859-1) and then there's a few characters within my site that do not display correctly, namely apostrophes and hypens.
    It definitely isn't my software (Serif WebPlus X4) because the page displays correctly in every other browser. Plus it displays correctly in Firefox if I change the Character set back to Unicode.
    PS The site is a work in progress

    That happens because the server sends a content-type (<b>text/html; charset=ISO-8859-1</b>) via the HTTP response headers and in that case that content type prevails. The page code is saved with an UTF-8 byte order mark () that you see in this case.
    *http://web-sniffer.net/?url=http%3A%2F%2Fwww.valuevisionglasses.co.uk&http=1.1&gzip=yes&type=HEAD&uak=0
    *http://httpd.apache.org/docs/current/mod/mod_mime.html#AddType

  • Captivate 6 Slide Audio screen not displaying correctly

    Upon trying to rerecord a slides's audio today this screen opened up - I could record, but not save because the save button is not displaying.  I was able to record new audio on the same project on Friday.  I tried deleting and recodring new audio and the same screen came up.  I tried a different project - same thing happened.  I rebooted twice.  Any ideas?
    Thanks!
    Rachel

    Hello,
    If you check the address bar of your screenshot, you will see that you are in "C:\Documents and Settings\[user name]\Application Data\Adobe" folder
    Might be a possiblity that "Local Settings" folder is hidden, click on Tools -> Folder Options, under View tab, you have the option to "Show hidded files and folders"
    You will see Local Settings folder once you click on OK, then you can access C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe and rename "Captivate 6.0" folder.
    Hope this helps !!
    Thanks,
    Vikram

  • Mac air screen not displaying correctly

    I have a Mac Air 13' screen. Recently I was using it and someone put a lemon head on the keyboard and slammed the screen down on it for no reason.
    The screen is now displaying a grey screen with a white vertical line down the middle. When I turn the computer off and then back on the screen is
    exactly the same. When I type I cannot see anything that I type. I have a two year warranty on my computer. I am just wanting to know if there is anytthing
    that I can do without sending it in. If there is not, who or what am I supposed to call to send in the computer to fix it. Also would Ribbit computers or another computer repair store, would they be able to fix my screen without me sending it in to Apple. Any information would be appreciative and very helpful! Thanks for reading!

    Genius Bar Reservations

  • IPad air screen not displaying correctly

    My iPad Air screen has recently started displaying with a pink hue in two of the corners, showing as a medium sized oval in one corner and a small circle in the other. There are also some vertical pink streaks that are less marked. It's really noticeable when the screen is displaying a white background. The only recent changes I have made is downloading the new IOS 8 update. There has been no trauma or damage to the iPad. It is still covered under the 1 year limited warranty. is there any way to fix this in my own?! Thank you!

    Hello there katelynlc,
    It sounds like you have some graphical anomolies on your screen that have a pink hue. If it is a software issue it will be resolvable by either first resetting the iPad:
    Turn your iOS device off and on (restart) and reset
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Or backing up and restoring your iPad as a new device:
    iOS: How to back up your data and set up your device as a new device
    If restoring as new does resolve it, restore your backup and verify it still works. 
    If not, then the iPad will need service:
    iPad Repair and Service - Apple Support
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Variable Screen not displaying correctly

    Our BW install is BI 7.0, with BEx still in the BI 3.5.  We do not have any web-based reporting.  We have deployed the SAP 7.20 GUI with front-end patch 4.  One office is testing the installation with Win 7, Office 2010.  When executing a workbook from BEx Browser it takes a long time for Excel to initialize and then when the variable screen does appear there are missing descriptions.  A mouse over or a check of the variables will repaint that screen and populate the missing descriptions. 
    Has anyone experienced this issue?  I have tried to recreate this issue, but I have not been successful.  The installation has been redone several times and testing is consistent. 
    Thank you for your time.
    Karen

    Karen,
    Thank you for your reply.  The installation of the GUI was on a PC that was completely clean.  Since this is in a test environment, the IT office had that luxury.  They did a fresh install of MS Office and then the SAP GUI.  We ran the installation check earlier today and are reviewing the results to determine why this particual install is not working. 
    Thanks!
    Karen

  • Mac Pro Screen not displaying correctly

    I have had a problem with my mac which is i have recently bought. The problem is that occasionally the screen will become fragmented and be all over the place and i am unable to see anything and i have to restart the laptop. This happens at least twice a day and can happen when i shut the lid of the mac or i am on it. Another problem that i have is that a message often pops up stating that my mac has to restart and i'm not really sure why. If anyone else has this problem and has sorted it out please let me know.

    Your warranty includes 90 days of phone support. Call AppleCare, or make a "Genius" appointment at an Apple Store to have the machine tested. Back up all data before you go.

  • I am using a mac os10.6.8 with 2 gig of ram and its keeps freezing.  the mouse moves but the machine is frozen.  If I should down and restart the machine runs fine for a while and then freezes again.  any suggestions?

    I am using a Mac with OS X 6.8 it has 2 gig of ram and it keeps freezing.  Tlhe mouse will move but the machine is frozen, if i shut down and restart the machine is fine for a while. any suggestions as to what to check or what could be causing this?

    Run Disk Utility to check the SMART status of your hard drive.

  • Why does my passcode screen not display correctly, since ios7

    I STILL hate ios7 -- doesn't make me dizzy, but sure does hurt my eyes.  I find it MUCH hard to read the screens.  Here's an example of what I sure think is a BUG, with this new display design -- my passcode screen is SUPPOSED to look like the one on the left (and it occasionally/rarely does), but it USUALLY looks like the one on the right.  Keypresses are not in any way indicated -- you can't really tell what number you're hitting, and you can't see if you've accidentally hit it more than once, or how many you've entered.
    Am I the only one experiencing this?

    Okay, I figured out from other posts that, if I change from my background to an Apple-provided background, I don't have this problem.
    So the next question is -- WHAT is required of a custom background (due to the overload of whiteness/brightness in ios7, it's REALLY important to me to have my background be all black, to provide the contrast I need to see things) for it to really work, in ios7?  Why doesn't the all black background that I used, with no problem, in ios6, work anymore?

  • Screen not displaying correctly.

    I recently plugged my iPad in to charge.  About an hour later, I unplugged the iPad and went to use it.  When I turn the screen on there are small vertical lines dancing all over the screen.  I can barely make out my background behind these lines.  It looks like the touch screen is fine, however I cant see my desktop because of the lines.  Any ideas?

    Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.

  • IPad Screen Not Displaying Correctly

    I have been using my iPad today and it was working fine. I switched off temporarily and a few minutes ago I switched on and all I got was a screen full of jittering wavy grey lines. I could make out the time behind the lines but that was about all.I tied to reset it, but the red line appeared at the top of the screen. I slid that and the Ipad tried to boot with the circular thingy in the middle of the screen but it failed and all I have is a black screen now.
    It is an iPad 1 which I have had for a year or more. I am away from my base in London UK and cannot get to the Apple store.
    The battery is fully charged.
    Is there anything I can do or has it gone to the iPad heaven.
    Surely it should have lasted longer than this.
    Anniel34

    Further update to my original question. The iPad goes to the apps screen and if I touch an app, it goes there but the colour screen is ful of white/grey shimmering lines so nothing can be properly seen.
    Is this info. helpful?
    Thanks
    penym

  • I am have problems with firefox 5& 6. It does not display correctly. I have tried the no squint and the internal zoom. Some pages load ok, others like yahoomail, load tiny unless I zoom and then other pages have problems. Why? What else can I be doing?

    I am frustrated. With the no squint, which has a mind of its own, then some pages are fine, in others the type is too big or too small for the frames. If I use the default Firefox zoom that is no better. I have to set things for like 130 percent and am constantly having to click on the zoom and change things. I never had that with previous versions? Why can't Firefox just go back to displaying text in the correct frames at a decent size?

    I have played with all the options in no squint and the default zoom thing. My email list in yahoo remains tiny tiny, other things do not. If I enlarge that, then other things are too big. I never had this problem with older versions of firefox. I never had used any zoom features, it all sized itself correctly.
    To troubleshoot, I tried to open the same things with chrome, and it had much less of a problem sizing the type etc.
    I am kind of at my wits end here.

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • How can I stop all tracks on an album playing automatically?

    I use my iPod Classic to play backing tracks in my band. I have all our songs in one Album and want to be able to trigger tracks one at a time. But as one track ends the next one starts automatically. I want to be able to trigger the next track mysel

  • My elitebook 6930p says it has not sound card installed?

    I got this laptop from our IT department at wrok and it appears no audio card is installed?  This seems odd, but it definitely doesn't show up in the device manager.  Can anyone tell me how to get audio, it has the headphone port and speakers in the

  • Downloaded Photoshop Elements to a Windows 7 computer and it won't open

    It appeared that I successfully downloaded photoshop elements to my computer, restarted computer and now when I click on the photoshop icon on my desktop, it won't even open for me.  I have the current Flash player, not sure what else to try.  Any he

  • Users Responsabilities on OPA

    Hi, Our user needs to appart the responsabilities for each area in OPA. For instance: 1. IT Users can create the "rules", like: "Validade the City", "Validate the Hour". 2. The Business Users can decide to use each rule and they can input values for

  • 0RT_PA_TRAN_CONTROL DataSource doesn't appear in Transaction SBIW.....

    Hi all i'm trying to use standard POS PIPE Retail Data Sources 0RT_PA_TRAN_CONTORL. This DataSource unfortunately doesn't appear in the R/3 System TAC: SBIW. This DataSource also not exist in table ROOSOURCE, neither in OBJVERS 'A', nor in OBJVERS 'M


HashFlare