Screen not displaying correctly.

I recently plugged my iPad in to charge. About an hour later, I unplugged the iPad and went to use it. When I turn the screen on there are small vertical lines dancing all over the screen. I can barely make out my background behind these lines. It looks like the touch screen is fine, however I cant see my desktop because of the lines. Any ideas?

Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.

Similar Messages

Screen not displaying correctly. It keeps moving as the mouse moves

Screen not displaying correctly. It keeps moving as the mouse moves

Your problem is not the same as that of the original poster of this thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
In order for us to give your problem our undivided attention to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac or iDevice you are using, what operating system, and what version of the application in question. Please remember to post in the forum relevant to your hardware or version of OS X.

Outlook web login screen not displaying correctly on Exchange 2007 service pack install

Hello everyone,
I believe our exchange server installed a service pack 3 update and after rebooting the server, we noticed that the Outlook web access login screen is not displaying correctly. The page looks white with some black X's (I think that's where the
pictures/background images used to be). We tried to restart the ISS service with no luck. I would appreciate any help you guys can provide.
Thanks,
Brian Kourdou

Hi,
I have seen this issue in another similar thread, that issue was solved by re-creating the OWA virtual directory.
Please try the following steps to solve this issue.
Open EMC, navigate to Server Configuration -> Client Access, under Outlook Web App tab, double-click owa (default web site) properties.
Then check InternalURL, ExternalURL, Forms-Based Authentication settings ect
Open EMS, use Get-OwaVirtualDirectory get the list of virtual directories and identify the directory which is giving the problem.
Remove it with this command
Remove-OwaVirtualDirectory “owa (Default Web Site)”
Now create it again with the following command
New-OwaVirtualDirectory -OwaVersion “Exchange2007″ -Name “owa (Default Web Site)”
Then configure the “owa” virtual directory settings like InternalURL, ExternalURL, Forms-Based Authentications etc… & check the OWA by logging with some test users.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Screen not displayed correctly using InteractiveViewer

I have created a report that prompts the User for Start and End dates. When the Prompt dialogue box is displayed using interactiveViewer the images are not displayed correctly.
Does anybody have a fix for this problem ??
Example attached.
Ron Smith
DBA

My guess is that the toolbars don't show up when you view the reports either.
There should be a virtual directory called 'crystalreportviewers' on your webserver. This is where you will find all the images supplied by the viewer.
Right click on the image that is having problems and select properties. This should give you location of the viewer.
You should be able to trouble shoot this way be comparing the actual path with the real path of the missing images.
Hopefully this will help.
<a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/robhorne</a>

Captivate 6 Slide Audio screen not displaying correctly

Upon trying to rerecord a slides's audio today this screen opened up - I could record, but not save because the save button is not displaying. I was able to record new audio on the same project on Friday. I tried deleting and recodring new audio and the same screen came up. I tried a different project - same thing happened. I rebooted twice. Any ideas?
Thanks!
Rachel

Hello,
If you check the address bar of your screenshot, you will see that you are in "C:\Documents and Settings\[user name]\Application Data\Adobe" folder
Might be a possiblity that "Local Settings" folder is hidden, click on Tools -> Folder Options, under View tab, you have the option to "Show hidded files and folders"
You will see Local Settings folder once you click on OK, then you can access C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe and rename "Captivate 6.0" folder.
Hope this helps !!
Thanks,
Vikram

IPad air screen not displaying correctly

My iPad Air screen has recently started displaying with a pink hue in two of the corners, showing as a medium sized oval in one corner and a small circle in the other. There are also some vertical pink streaks that are less marked. It's really noticeable when the screen is displaying a white background. The only recent changes I have made is downloading the new IOS 8 update. There has been no trauma or damage to the iPad. It is still covered under the 1 year limited warranty. is there any way to fix this in my own?! Thank you!

Hello there katelynlc,
It sounds like you have some graphical anomolies on your screen that have a pink hue. If it is a software issue it will be resolvable by either first resetting the iPad:
Turn your iOS device off and on (restart) and reset
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Or backing up and restoring your iPad as a new device:
iOS: How to back up your data and set up your device as a new device
If restoring as new does resolve it, restore your backup and verify it still works.
If not, then the iPad will need service:
iPad Repair and Service - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling

Mac air screen not displaying correctly

I have a Mac Air 13' screen. Recently I was using it and someone put a lemon head on the keyboard and slammed the screen down on it for no reason.
The screen is now displaying a grey screen with a white vertical line down the middle. When I turn the computer off and then back on the screen is
exactly the same. When I type I cannot see anything that I type. I have a two year warranty on my computer. I am just wanting to know if there is anytthing
that I can do without sending it in. If there is not, who or what am I supposed to call to send in the computer to fix it. Also would Ribbit computers or another computer repair store, would they be able to fix my screen without me sending it in to Apple. Any information would be appreciative and very helpful! Thanks for reading!

Genius Bar Reservations

Why does my passcode screen not display correctly, since ios7

I STILL hate ios7 -- doesn't make me dizzy, but sure does hurt my eyes. I find it MUCH hard to read the screens. Here's an example of what I sure think is a BUG, with this new display design -- my passcode screen is SUPPOSED to look like the one on the left (and it occasionally/rarely does), but it USUALLY looks like the one on the right. Keypresses are not in any way indicated -- you can't really tell what number you're hitting, and you can't see if you've accidentally hit it more than once, or how many you've entered.
Am I the only one experiencing this?

Okay, I figured out from other posts that, if I change from my background to an Apple-provided background, I don't have this problem.
So the next question is -- WHAT is required of a custom background (due to the overload of whiteness/brightness in ios7, it's REALLY important to me to have my background be all black, to provide the contrast I need to see things) for it to really work, in ios7? Why doesn't the all black background that I used, with no problem, in ios6, work anymore?

Variable Screen not displaying correctly

Our BW install is BI 7.0, with BEx still in the BI 3.5. We do not have any web-based reporting. We have deployed the SAP 7.20 GUI with front-end patch 4. One office is testing the installation with Win 7, Office 2010. When executing a workbook from BEx Browser it takes a long time for Excel to initialize and then when the variable screen does appear there are missing descriptions. A mouse over or a check of the variables will repaint that screen and populate the missing descriptions.
Has anyone experienced this issue? I have tried to recreate this issue, but I have not been successful. The installation has been redone several times and testing is consistent.
Thank you for your time.
Karen

Karen,
Thank you for your reply. The installation of the GUI was on a PC that was completely clean. Since this is in a test environment, the IT office had that luxury. They did a fresh install of MS Office and then the SAP GUI. We ran the installation check earlier today and are reviewing the results to determine why this particual install is not working.
Thanks!
Karen

Mac Pro Screen not displaying correctly

I have had a problem with my mac which is i have recently bought. The problem is that occasionally the screen will become fragmented and be all over the place and i am unable to see anything and i have to restart the laptop. This happens at least twice a day and can happen when i shut the lid of the mac or i am on it. Another problem that i have is that a message often pops up stating that my mac has to restart and i'm not really sure why. If anyone else has this problem and has sorted it out please let me know.

Your warranty includes 90 days of phone support. Call AppleCare, or make a "Genius" appointment at an Apple Store to have the machine tested. Back up all data before you go.

IPad Screen Not Displaying Correctly

I have been using my iPad today and it was working fine. I switched off temporarily and a few minutes ago I switched on and all I got was a screen full of jittering wavy grey lines. I could make out the time behind the lines but that was about all.I tied to reset it, but the red line appeared at the top of the screen. I slid that and the Ipad tried to boot with the circular thingy in the middle of the screen but it failed and all I have is a black screen now.
It is an iPad 1 which I have had for a year or more. I am away from my base in London UK and cannot get to the Apple store.
The battery is fully charged.
Is there anything I can do or has it gone to the iPad heaven.
Surely it should have lasted longer than this.
Anniel34

Further update to my original question. The iPad goes to the apps screen and if I touch an app, it goes there but the colour screen is ful of white/grey shimmering lines so nothing can be properly seen.
Is this info. helpful?
Thanks
penym

Firefox is not displayed correctly on USB-screen

Firefox 4.0 is not displayed correctly on USB-screen (Samsung SyncMaster LD 190). Firefox 3.6 was displayed correctly.
looks like an incompatibility problem between UbiSync and FF 4.0

You can try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You may have zoomed the page(s) by accident.
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
*http://kb.mozillazine.org/Zoom_text_of_web_pages

BPS_WB: Please Wait Dialog Box not Displaying correctly???

When we switched our Planning Interfaces to using the New Planning Interface Design the Please Wiat Dialog Box does not display correctly.
When a Request is fired and the client is waiting for the Response all that shows is a white block in the middle of the screen with no dialog screen or other information.
It maybe associated with the following:
function bpsOpenURLSelf(doIt, url)
      if (doIt) {
        try {
            document.body.style.cursor = "wait"; // works only in IE
        } catch (ex) {} // ignore
        open(url,'_self');
      // note: function with doIt==false is used to check
      //       existence of the opener window
Or it may be associated with a CSS issue?
I am currently using IE 6.0.2900.2180.
Any thoughts would be appreciated!
Thanks, ATC

Hi Alan,
please implement SAP note 845305.
Regards
Marc
SAP NetWeaver RIG

LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
Anybody know of a way round this?

Hi @dnhowes ,
I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
Was it the Nvram reset back to factory settings that you tried or a hard reset?
Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
I find that on the Lab printers when I am selecting different menus.
If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Management studio dialogs not displayed correct in high resolution

I am using a Lenovo Yoga2 with 3200x1800 screen resolution, and some dialog boxes are not displayed correct, like the Select backup file dialog that doesn't display directory and the file list. Is there any fix for this?

I'm having the same issue. Let me try to elaborate a little, providing you with more details.
Laptop, Dell Precision M3800
Resolution, 3200x1800 (getting more common on new high-end laptops with 15+ inches)
OS, Windows 8.1
Application, SSMS aka SQL Server Management Studio - version 2014 (earlier version has same issue)
SQL Server Engine irrelevant (tested with 2014 and below - all the same)
I understand you want to see a screenshot, but really, it doesn't make sense as you won't be able to reproduce the error if you are watching on e.g. a FullHD screen. therefore, I've taken a screenshot and resized it to a FullHD size so you get a better feel
of the issue - however, I have to mention text will look a lot more crisp on a 3200x1800 screen (that's kind of why you want a screen with high PPI). That said, it's still way too small to look at.
If you view below image on a 15.4 inch screen with FullHD, you get a feel of how I work with SSMS today.
http: // i.imgur.com / TwOmzjr.png (remove spaces)

Screen not displaying correctly.

Similar Messages

Maybe you are looking for