Screen resolution problem after i-tunes installed on XP pro

Just purchased 5th Generation 60Gb for my daughters 16th Birthday which starts in about 14 minutes! Loaded the software on her XPpro service pack 2 laptop. When itunes executed the screen resolution drops to 8 bit! It can be changed in control panel and all works fine. but each time re boot itunes and the problem returns!
Loaded on my desktop and everything fine also. tried the ms config stuff as per site and immediate problem when ms software disabled. Would seem to be a software conflict and compatability problem. The laptop is a fujitsu which is 2 years old. the older version of i-tunes which she downloaded about a year ago worked ok. Sadly we uninstalled it before installing the new version from the disc. Tried update from the site but it indicates the DC version is the latest.
Interesting to read some of the problems that flks have had with the ipods. This one seems OK but does have a 'do not disconnect logo which hangs up and doesn't go away. However, if I do disconnect the computer 'burps' at me then all is well and forgotten!
Oh yes. how do you delete unwanted songs once uploaded? Is there a simple 'delete' button?
Any thoughts anyone as I've now spent all evening on it and it's her birthday in the morning (8th June)
thanks in anticipation
Gwynne (minolta man)

sorted problem by changing computer! probably softward hardware conflict with iTunes

Similar Messages

Anyone experiencing screen resolution problems after latest Mavericks Update?

Anyone got a blurred monitor after the latest Mavericks Update?
I am running Mavericks 10.9.2 on a Mini Mac with a Logic TV/Monitor. Since the latest Mavericks update I no longer have the option in settings to scale to 1600 x900. Since this gives the best picture on my monitor I now have either a blurred screen with large text or a blurred screen with very tiny text. No other options that give a 'normal' display seem available now, after allowing the 'Update'. The update claims to be addressing faults on the MacBook display, which it may well do, but it has also apparently screwed up Mac Mini screen resolution Options for some of us.
I have reverted back to 10.9.2 and turned off automatic updates, but I can't stay that way indefinitely.
I've tried to find an e-mail address or phone number to log my complaint to Apple but to no avail. (I guess they would otherwise be inundated with customer complaints so keep that kind of information under wrapps). Anyone got any ideas?

I'm not having any problems with dual DVI connected Samsung 21.5" monitors in 10.9.3
What connection (adapter, cable, etc.) are you using..?
To send Apple Feedback, go to > Apple - Mac OS X - Feedback
If your looking for better resolution options, try > Mac App Store - Display Menu

EHP1 Upgarde Monitor screen resolution problem in a support message

Hi Experts,
We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
can any one suggest how to make the overview tab visible completely with small resolution monitors.
Thanks
Nanda

>
Nanda Kishore wrote:
> Hi
>
> There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
>
> Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
SAP Note 1351673 Size of containers not changed for support messages
Best regards,
Ruediger

Screen resolution changes after opening PDF in preview and is enlarged.

Screen resolution changes after opening PDF in Preview and is enlarged.

Do a backup.
Quit Preview.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following. You may not find them all.
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Credit Linc Davis for this solution.

Screen resolution problem in table control

when i was transfering data in BDC using table control,i got screen resolution problem.
how to rectify the problem?

Hi,
Check this coding.
WA_CTU_PARAMS type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronous update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM WA_CTU_PARAMS
MESSAGES INTO it_mesg.
Default size will play good role in terms of resolution. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resolution. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Hope this resolves your query.
Reward all the helpful answers.
Regards

Screen Resolution Problem in Session Method

Hi
I want to use session method in BDC. How to resolve screen resolution problem in Session Method?
Please give me the code or steps regarding this.
Thanks & Regards
venkateswararao

Hi
U can only run the session with the option Dynpro Standard Size setted.
In this way the system should be use the same resolution for every situation.
Max

To Resolve Screen Resolution Problem

Hi
How to resolve screen resolution problem in BDC Session Method. can't we use ctu_params?
Thanx & Regards
venkat

Hi Venkat,
Yes, you can use ctu_params.
This is for Default screen size for CALL TRANSACTION. It signifies the screen size will be constant irrespective of the screen resolution(which can vary for different user). The importance of this lies in programs(module pool) that contain table controls. With default screen size we can control the no of rows in the table control which otherwise may vary depending on the screen resolution.
DEFSIZE is the Selection as to whether the screens of the called transaction are displayed in the standard screen size. Values "X" (standard size), " " (current size).
sample.
data : x_ctu_params type ctu_params.
To have default screen size, mode and update
x_ctu_params-defsize = 'X'.
x_ctu_params-dismode = 'X'.
x_ctu_params-updmode = 'X'.
call transaction tscode using bdcdata
options from x_ctu_params
Regards,
Ferry Lianto
Please reward points if helpful.

Message says "screen resolution problem" and says to set higher than 1020 x 600. My screen resolution is set higher. Why am I getting this message all the time I use firefox?

when I go on to Firefox I keep getting the message that there is a screen resolution problem and it says I should set it higher a than 1020 X 600. But my screen resolution is set higher. It is set at 1360 x 768. Why am I getting this message continuously?

I've had the problem too... for at least a month or more. It would happen when logging into yahoo mail. But it happens only with firefox... not explorer. I contacted yahoo and he had me first disable add ons... no change... and since it didn't happen with explorer, they said to contact firefox. So I followed the advice of cor-el's post (on this page) and made the text on my page smaller... It did fix the issue.... but, I liked the size of the text the way I had it. So, how do I get it back to that size, and not have that annoying message any longer? thanks!!

Printing Problems after Reader 10 install

Recently deployed Reader 10 to about 300 workstations using Group Policy. Several machines are no longer able to print to some of the network printers. These printers are HP printers using the Universal Print Driver. When trying to print we get an error and the Adobe Reader application crashes. It will however print to other network printers that are using an older device specific driver, printing to the same print device. Have downloaded the latest HP driver, but it has not helped the situation. The printing worked fine with Reader 8 and Reader 9.   Anyone with an Idea?

Sorry only know Windows: Edit (menu)>Preferences>General>Application Startup>Enable Protected Mode at startup.
Wayne Capra
Date: Wed, 26 Oct 2011 10:37:59 -0600
From: [email protected]
To: [email protected]
Subject: Printing Problems after Reader 10 install
    Re: Printing Problems after Reader 10 install
    created by Al1iOop in Adobe Reader - View the full discussion
I am using a Mac 10.6 and cannot find the "Enable protected mode at startup" in General or any other options. Does anyone have an answer for Macs? Thanks.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3991540#3991540
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3991540#3991540. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

After Mountain Lion install, my MacBook Pro's fan is running non-stop.

After Mountain Lion install, my MacBook Pro's fan is running non-stop and you can hear the insides working extra hard. Is this normal? It's very loud and annoying?

http://support.apple.com/kb/HT3964?viewlocale=en_US

Login Screen Resolution Low after Mavericks install

After installing Mavericks OS X 10.9 on my 13" Mid-2011 Macbook Air, the login screen resolution is not correct. The icons are huge and the resolution is very low and grainy. I Only one of my user login choices was visible. Once logged in, the resolution is correct, but with some strange issues such as the Apple icon in the upper-left corner of the screen is invisible until it is hovered over. The App store locked up. I had a bouncing folder named "sbin" appear in the dock, but I could not click on it or open it. That has not re-appeared after rebooting. If I boot into Safe Mode, the login screen resolution is correct.
Any ideas how to fix this? Thanks.

Dominic23,
Thank you for the suggestion. I tried that, but it didn't work. I even let it cycle through a couple of times before allowing it to boot normally. I also tried deleting some of the plists preferences, but that didn't work, either. I also noticed that any changes to the screen preferences causes the "sbin" folder to temporarily appear bouncing on the dock. I'm thinking there may be a damaged or missing file, but I really don't know how to troubleshoot this. I've been a PC techyt for decades, but I'm a newbie on a Mac.
Thanks.

Preview app retina resolution problems after Mavericks upgrade

Hi everyone!
after upgrading from Mountain Lion to Mavericks, the Preview app (Version 7.0) stops working in Retina resolution.
For instance, a 2500pix graphics now does not fit in the monitor (2880x1800 pix native resolution) when displayed at actual size, i.e. 1 image pixel per 1 screen pixel. It is rendered at twice as low resolution.
As with the previous os x mountain lion, in Mavericks too I am using "Best (Retina)" screen resolution mode in the Display Preferences.
Any idea how to resolve this?
actually, I belive this is some sort of bug of the Preview app.
Is there anyone else having the same issue? If yes, please reply to this
i have a macbook pro retina 15"

Hi everyone,
i have a solution!
well at least that worked for me.
It is nothing like a bug or software problem. It is just that after mavericks install for some reason i found a change in my Preview app preferences. So i set it correctly and now everything is back and working correctly.
Go to the Preview Preferences, then choose the "Images" section/tab, then choose "Size on screen equals size on printout" option, and thats it!
Try this out and I hope this works for you too!

Screen Resolution Problem (Max. Resolution of only 1024x768)

Hello,
I just upgraded my T61 laptop from Windows XP to Windows 7, Everything was fine at first. But one day when I turned on my laptop, I found out that the screen resolution was wrong. It was only 1024x768 (not wide screen). As a result, the screen was on the left, leaving a thick black bar on the right. The given resolutions which I could choose are only 800x600 and 1024x768, no wide screen options. Tried nvidia control panel, it was still the same. Tried to connect to an external monitor (16:9 wide screen), the resolution was, however, perfect (fit the external monitor).
I already have the newest display driver (nvidia Quadro NVS 140m - downloaded from Lenovo). I even reinstalled the driver and installed the monitor driver provided by Lenovo, but the problem still exists.
By the way, after I encountered this problem, when I turn on the laptop, there is no more screen showing the ThinkVantage and the Intel logo. There is also no screen for "Starting Windows". It will straight away enter windows logon screen. It means, I have no way to enter BIOS or the recovery tools by pressing the ThinkVantage button at startup. (I cannot see anything!)
Anyone can please help me?
Thanks!

ahboy0207, welcome to the forum,
you need to install the monitot inf file from here. Scroll down the page for installation instructions.
As you have installed another OS on your system you will have changed the Master Boot Record, (MBR), which contains the information allowing the ThinkVantage button to work at boot. If you left the recovery partition intact, i.e. didn't format it, it may be possible to repair the MBR in order that you can access it. However, the recovery partition will have the original XP image on it and not your W7.
You can enter BIOS by pressing F1 at boot.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

3000/N100 Mouse/Screen Resolution Problems with Windows 7

This is my first post and I appreciate your service. My problem is that after I upgraded from Vista to Windows 7, I find that my touchpad mouse will freeze up & the screen resolution will changes occasionally when I boot up my computer. When this happens, I have to restart my computer and hope that the mouse works and screen resolution is correct. If it does work, it will continue to work until I turn off or restart the computer, then I cross my fingers again. All my drivers are updated. If the touchpad mouse is frozen, I can get my usb mouse to work, but I don't want to have to do that. Has anyone else had this problem, or can anyone offer suggestions?
I never had this problem until I upgraded to Windows 7.
Thanks in advance,
Mike

I am using the Win 7 Enterprise 32 bit trial version.
It is the FULL version, NOT an upgrade.
If you used Upgrade, that may be a clue?
Synaptics touchpad Ver 6.2 (From Synaptics)
File: v14_0_3_C_XP32_Vista32_Win732...
Graphics: Intel VER. 8.15.10.1930
From Windows update.
You did not post your model number, so you may have Alps and Nvidia, who knows?

Screen Resolution Troubles After Using HDMI and Converter

After using a StarTech HDMI converter to watch Netflix on my television, the resolution on my macbook pro is messed up. If I close Netflix the resolution returns, but after trying to use other programs like iPhoto and iMovie I ran into the same problem. As soon as I open those apps the resolution gets distorted and the screen is blurry. Like with Netflix, as soon as I close those apps the screen resolution returns to normal. Also every time I connect the converter and HDMI cord from my Macbook Pro to my television the resolution goes blurry, but the resolution is perfect on the television.

After using a StarTech HDMI converter to watch Netflix on my television, the resolution on my macbook pro is messed up. If I close Netflix the resolution returns, but after trying to use other programs like iPhoto and iMovie I ran into the same problem. As soon as I open those apps the resolution gets distorted and the screen is blurry. Like with Netflix, as soon as I close those apps the screen resolution returns to normal. Also every time I connect the converter and HDMI cord from my Macbook Pro to my television the resolution goes blurry, but the resolution is perfect on the television.

Screen resolution problem after i-tunes installed on XP pro

Similar Messages

Maybe you are looking for